Looking for KG3 cm modem - Galaxy S I9000 Q&A, Help & Troubleshooting

After a mishap with my other phone I have to go back to my i9000m for a little while.
I want to try mackay rom as I can't do anything on 2.3.3 but I need the kg3 modem file for cm and the only link for it on this forum is dead.
I googled it all the ways I could think of and I can't find it at all.
Would anyone still have this file somewhere?
Thanks.

paper183 said:
After a mishap with my other phone I have to go back to my i9000m for a little while.
I want to try mackay rom as I can't do anything on 2.3.3 but I need the kg3 modem file for cm and the only link for it on this forum is dead.
I googled it all the ways I could think of and I can't find it at all.
Would anyone still have this file somewhere?
Thanks.
Click to expand...
Click to collapse
Found it in an old backup.
Can't post links but, I got it if anyone needs it.

Related

[Q] Any good Roms or Themes available for JL2 FroYo - Bell Mobility Canada?

Hi All,
Does anyone know of any roms or themes that have been made specifically for the JL2 Froyo Firmware for Bell Mobility in Canada?
There are the Darky ROM and the DOC's ROM
i personally like more the DOC's ROM
Hi AllGamer,
Thanks for the info. Dumb question perhaps but how do I flash the rom to my phone exactly? I cant seem to get it re-rooted so I cant do the update zip and I am STILL scared to use ODIN for anything.
Any ideas? Please advise...
yiannisthegreek said:
Hi All,
Does anyone know of any roms or themes that have been made specifically for the JL2 Froyo Firmware for Bell Mobility in Canada?
Click to expand...
Click to collapse
I know that you asked for JL2 but here's a thread on Bell and JPY. It's what got me started and I ended up flashing seeARMS' JPY.
yiannisthegreek said:
Hi AllGamer,
Thanks for the info. Dumb question perhaps but how do I flash the rom to my phone exactly? I cant seem to get it re-rooted so I cant do the update zip and I am STILL scared to use ODIN for anything.
Any ideas? Please advise...
Click to expand...
Click to collapse
Even with a rooted phone (SuperOneClick will do JL2 and can be found in the i9000 Dev forum), you're still stick unless you fix your recovery (which requires you to use ODIN to do so). You can get back to 2e recovery by flashing a custom kernel (e.g. SpeedMod found in the i9000 Dev section) or an older stock firmware (you can find JH2 at http://samfirmware.com).
Read up on the Reference thread. It's one of the pinned threads in the General section and will give some help on how to use ODIN.
Thank You to all of you who have answered me. I will look into these solutions for rooting and Themes/Roms...
yiannisthegreek said:
Thank You to all of you who have answered me. I will look into these solutions for rooting and Themes/Roms...
Click to expand...
Click to collapse
Yiannisthegreek...let me know if you were able to root with JL2 and how you did it. I am still running 2.1 with the fear that I will be unable to root once I make the upgrade to 2.2 JL2
Let me know if you were successful
kwonton said:
Yiannisthegreek...let me know if you were able to root with JL2 and how you did it. I am still running 2.1 with the fear that I will be unable to root once I make the upgrade to 2.2 JL2
Let me know if you were successful
Click to expand...
Click to collapse
JL2 is easily rooted with Super One Click or flashing a kernel that has a rooting option in CWM.

[Q] Massive SGS Problem

Hey All, sorry if its and easy problem or if its been posted heaps before i have been searching and tried everything to no avail so here i am putting it to all u xda members to help me with all your wisdom. See i have had my galaxy for a few months and thought hey time to play with the pre release of 2.3.3 before it was officially released well now im buggered lol i cant wipe, i cant factory reset i flash another firmware and it all goes fine it reverts back but all my apps and settings and accounts are still there and when i delete my apps and restart there all back again! i install new apps and they delete on restart... frustrating...i cant put any update.zip onto my internal as it deletes it straight away and installing from external SD dosent seem to work, i tried a few posts like this one as suggested by JJEgan else where to no avail either (http://forum.xda-developers.com/showthread.php?t=818556) id love to be able to use my SGS again as i bought a windows phone 7 as a replacement and i dont like it lol SAVE MY ANDROID AND MY SANITY PLEASE!!!!!
Is it an international I9000? Or the I9000B? It seems to me as though your sdcard might be corrupt... Wipe your Dalvik cache. Did you try flashing a DBDATA containing firmware onto your phone, using ODIN? If not, flash XXJPU (Froyo) and see if that helps...
well its a telstra GT I9000T the 2.3.3 firmware i have is the only one i can seem to find with the 3 files lol i try to wipe dalvik it says it completes but nothing changes at all do u know anwhere i can get 3 file firmwares from as samfirmware.com only has 1 file flashes cheers for the help!
Prankzter said:
well its a telstra GT I9000T the 2.3.3 firmware i have is the only one i can seem to find with the 3 files lol i try to wipe dalvik it says it completes but nothing changes at all do u know anwhere i can get 3 file firmwares from as samfirmware.com only has 1 file flashes cheers for the help!
Click to expand...
Click to collapse
Look around for a I9000T firmware that contains DBDATA. It should hopefully fix what you're experiencing... Personally, mine's an I9000 so I have no idea about your firmwares... But you can search this forum..
Prasad007 said:
Look around for a I9000T firmware that contains DBDATA. It should hopefully fix what you're experiencing... Personally, mine's an I9000 so I have no idea about your firmwares... But you can search this forum..
Click to expand...
Click to collapse
thanks for the help mate ill google around
Prankzter said:
thanks for the help mate ill google around
Click to expand...
Click to collapse
You're welcome.
nah no good for some reason recovery wont even change back from 3e i flashed my original firmware and it changed to 2e i reset to flash to 2.2.1 as u suggested and its back at 3e so who knows...may have to reflash to original and take it back to telstra unless u have any other ideas
Prankzter said:
nah no good for some reason recovery wont even change back from 3e i flashed my original firmware and it changed to 2e i reset to flash to 2.2.1 as u suggested and its back at 3e so who knows...may have to reflash to original and take it back to telstra unless u have any other ideas
Click to expand...
Click to collapse
If you have warranty, you should flash the stock firmware for your phone and take it in for repairs... Honestly, can't think of anything else... Unless there's more input from others here on the forum with your model.
Prasad007 said:
If you have warranty, you should flash the stock firmware for your phone and take it in for repairs... Honestly, can't think of anything else... Unless there's more input from others here on the forum with your model.
Click to expand...
Click to collapse
yeh looks like its time to return it...maybe i can get a sgsII lol i cant even repartition the damn thing...on a side note all my other flash based things like my camera and usb dongles and sd cards are all doing the same as in restoreing everything on reboot or unplug...wierd

Help needed after flashing Overcome ROM v3

Hi All,
I have been searching around for ages to find an answer with no luck!
I just flashed a mates tab with the following: http://forum.xda-developers.com/showthread.php?t=1074759
"[7.July.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.0.0-ICARUS ◄► Kernel v3.2.0 ◄►"
The tab is from optus here in australia - the problem is now it asks to inset the sim card - but its in there.
Now I made sure to flash a modem for optus...
What am I missing?? He is here watching over my shoulder lol
I am trying a full relfash using the JPZ modem.... any ideas as to what is should be?
***EDIT - OK - it seems following the overcome mod steps - when I do the odin flash with the choice of modem its all ok.
It reads the sim card no problems and gets service.
But when I update to the overcome mod via CWM using the zip file - it no longer works...
Any ideas?
help?? I still can't post in the dev forum even tho I have been here for ages
razz0r1980 said:
help?? I still can't post in the dev forum even tho I have been here for ages
Click to expand...
Click to collapse
i think you need 10 posts.
yeah - I have never had enough issues to have to post before of wellz lol I have tried every modem with no luck which suxs as I really like the way the rom looked.

[Q][I9000M][Help!][Canadian] Back to Stock

okay i have a Galaxy S on Virgin Mobile Canada
I have posted a few similar threads in the past and i apologize for repeating bits,
basically i want to get my galaxy s to stock UGKG3 and have tried multiple ways that have all failed, and i am sick of it,
i tried downloading and flashing files from samfirmware.com but it never worked for me, my galaxy s just didn't start up after i flashed so i re-flashed back to JVQ which is what i am on atm,
can some of you guys post alternate links to help me with this problem
(and yes i have searched around the rest of the forums for a few hours now)
i am looking for either:
directly to UGKG3
to KC1 then i can use kies
or even to JH1 then i can use kies
(the three file version of the downloads would be much appreciated seeing as they are the only ones ever to work for me---i only ever successfully flashed using files i downloaded using guides at androidsoul.com)
thanks everyone i hope this is the last thread with this problem i will have to post.
Go to the general section, there is a thread there on canadian i9000m. It's a compilation of resources. In it you will find a link to a stock KC1 that you can update from. I am currently on my phone, I will post a link when I can.
Sent from my GT-I9000M using XDA App
Got it. Here you go:
http://forum.xda-developers.com/showthread.php?t=1022445
It has a 3 file version for you.
update:
before i try that i found a 3 file version of KG3 and flashed it, it said it was successful but when i boot up it get stuck on the flashing S screen, so i went back to JVQ again, does this have anything to fo with a .pit file or something, and i will try the KC1 link soon, thanks
I routinely go back and forth between roms, testing things and trying stuff out.
Here's what I'd do if I were you. Flash JVQ or JVR, the 3 part rom, with 512.pit (and obviously repartition) with odin. This will fix your partitions just in case something went fubar.
Once you have that working, grab the official bell KG3 by using CheckFusDownloader (download link is in first post, its easy to miss). The GUI version doesn't work for me so I suggest you get the CLI version. The command to get the latest Bell rom is this:
Code:
CheckFusDownloader_v0.5 -dl I9000UGKG3/I9000BMCKG3/I9000UGKG3/I9000UGKG3 GT-I9000HKABMC GT-I9000M
You will have to copy the FusCipherUtil.dll library out of our kies installation to the same folder that you have the CheckFusDownloader exe. This is generally in C:\Program Files\Samsung\Kies\External\FirmwareUpdate\ but if its not there google around and I'm sure you can find it.
Once you have the tar file flash that as "phone" and hopefully you should have a working phone afterwards.

[Q] ROOT i9000m?

So here is the scoop. I've searched my a5s off in these forums but I can't get ahead. I have a i9000m that i want to root, apparently there is no one click root option for 2.3.3 GB, I've tried to flash a custom rom through odin, but can't seem to find the drivers for the device to be recognized in download mode. Basically all I am looking to do is unlock my phone, so before i pull the rest of my hair out and go back to my ****e old blackberry I am posting here, I know I'm the turd giving up and posting a new thread for questions that were probably answered eons ago. I also read somewhere that upgrading my touch button firmware was a good idea before flashing a new kernal..,. now they have decided to stop working
SG i9000m
2.3.3
baseband i9000UGKG3
kernal version 2.6.35.7-i9000ugkg3
[email protected]#2
build number gingerbread.gkg3
so if anyone can help me that would be great, because let's face it the blackberry doesn't hold up and I'd like to give it a good toss
EDIT: I've found the correct driver for the phone to be recognized, but I can't seem to find the original kernel anywhere. all the links seem to be dead.
So I'm wondering. CAN ANYONE SUPPLY THE ORIGINAL FIRMWARE FOR THE I9000M? I've read other users flashing the stock fw and then updating the keys in said fw and having their issue fixed. So can some kind soul please direct me to where I can find the files? Basically I'm looking for froyo 2.2.1 for the i9000m, but all the links are dead! and sammobile.com is down. can somebody supply said rom so I can flash back to original and fix my soft keys, which are essential to the galaxy..
trickassfoo said:
So I'm wondering. CAN ANYONE SUPPLY THE ORIGINAL FIRMWARE FOR THE I9000M? I've read other users flashing the stock fw and then updating the keys in said fw and having their issue fixed. So can some kind soul please direct me to where I can find the files? Basically I'm looking for froyo 2.2.1 for the i9000m, but all the links are dead! and sammobile.com is down. can somebody supply said rom so I can flash back to original and fix my soft keys, which are essential to the galaxy..
Click to expand...
Click to collapse
I have for 2.1. Let me know if you want. By the way, there is one click root
http://forum.xda-developers.com/showthread.php?t=803682

Categories

Resources