Related
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
The Viper's poison.
Let it flow.
INSTALLATION INSTRUCTIONS
Same as every ROM since the beggining of custom roms flashing.
Wipe Cache - Data - Dalvik
Install.
CHANGELOG
Viper-hi6250-20180321
-initial build
Viper-hi6250-20180322
-removed baked-in su binary
-added COH extras
-NFC should be fixed
-untested on devices, need feedbacks.
-maybe final version due to lack of support by ViperOS team (security patch related)
Viper-hi6250-20180324
-Updated to R36
DOWNLOADS
Viper-hi6250-20180321-Coral-v3.1.1-UNOFFICIAL.zip
Viper-hi6250-20180322-Coral-v3.1.1-UNOFFICIAL.zip
Viper-hi6250-20180324-Coral-v3.1.1-UNOFFICIAL.zip
XDA:DevDB Information
ViperOS, ROM for the Huawei P8lite/P8 Lite
Contributors
dil3mm4.dev, COH devs, LOS devs, ViperOS devs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: None
Based On: LOS
Version Information
Status: Stable
Kernel Sources
https://git.stargazer.at/dil3mm4/android_kernel_huawei_prague
Created 2018-04-06
Last Updated 2018-04-05
Does anyone actually realise how excruciating It would be to have venom flowing through your veins?
i've installed this ROM, its realy fluid, smooth
Its the best ROM
thanks a lot
Bugs?
I found just one bug so far, when i type in to call a ussd code like in my country *100# it's just skip that command. Everithing else is flawless.
Sent from my HUAWEI P9 lite using Tapatalk
---------- Post added at 12:32 AM ---------- Previous post was at 12:31 AM ----------
I found just one bug so far, when i type in to call a ussd code like in my country *100# it's just skip that command. Everithing else is flawless.
Guysho_2112 said:
Bugs?
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
My proximity sensor didn't work with this rom. So the screen didn't dim between calls and the autobrightness setting didn't work. Otherwise its a great rom, but becouse of the issues I switched back to Lineage 14.1. Is that a bug or is it just an issue on my part?
I don't have that issue, I'm on L21 c432.
I have a issue with a ussd code like in my country *100#, etc..
jura123 said:
My proximity sensor didn't work with this rom. So the screen didn't dim between calls and the autobrightness setting didn't work. Otherwise its a great rom, but becouse of the issues I switched back to Lineage 14.1. Is that a bug or is it just an issue on my part?
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
WOW... It seems to be great... There are screenshots?
Would I install this on a p9 lite then install a Nougat rom? (I'm on Marshmellow)
I think you shoud first install nougat, after that this rom..
Just Dan said:
Would I install this on a p9 lite then install a Nougat rom? (I'm on Marshmellow)
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
Nelle9900 said:
I think you shoud first install nougat, after that this rom..
Click to expand...
Click to collapse
Wdym? Like install Nougat through a ota update? I can't if that's what you mean but I thought this is android 7 but it doesn't need a emui 5 firmware to be installed
Try it then, but first backup everything
Just Dan said:
Wdym? Like install Nougat through a ota update? I can't if that's what you mean but I thought this is android 7 but it doesn't need a emui 5 firmware to be installed
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
First thing you do when you post new thread about new rom, is to upload screenshots.
Can't boot custom ROM in Huawei P9 Lite
Hi!
First of all sorry if this is not the right place to post this problem!
I'm having a very dissapointing experience trying to install custom roms in the Huawei P9 Lite, after many instalations of different roms I always get stucked in the initial screen with the message "Your device is booting now...." . I've tried everything and I've followed all the instructions:
- bootloader unlocked
- device rooted
- twrp from meticulus
- swipe data, system, cache , davlink before installation
- installed the gapps
Everything seems to work perfectly, however it is impossible to boot in the operating system . I have a vns-l31 that originally was L31c900B130 and thenI changed to L31C432B162.
Please I need some help, I don't know what else can i do!
thanks!!!
what do i type here
nnnnnnnnn
Is this ROM still updated and supported?
ViperOS itself is discontinued. This specific Viper rom also seems to be abandoned.
Awesome Job on this ROM. I have it working on my Honor 6X (BLN-L24) which is also an hi6250 variant, and its the best one out there that I've tried for the 6x. And to think I had to come to the p9 lite forums for better variety! Anyway, thanks for the good work here to the dev team!
smarichal said:
Hi!
First of all sorry if this is not the right place to post this problem!
I'm having a very dissapointing experience trying to install custom roms in the Huawei P9 Lite, after many instalations of different roms I always get stucked in the initial screen with the message "Your device is booting now...." . I've tried everything and I've followed all the instructions:
- bootloader unlocked
- device rooted
- twrp from meticulus
- swipe data, system, cache , davlink before installation
- installed the gapps
Everything seems to work perfectly, however it is impossible to boot in the operating system . I have a vns-l31 that originally was L31c900B130 and thenI changed to L31C432B162.
Please I need some help, I don't know what else can i do!
thanks!!!
Click to expand...
Click to collapse
Happy new year to all you peoples here !!!
Dude B162 is related to Marshmallow (android 6.0 / Emui 4) firmware
and you cannot flash a rom based on Android 7.0 / Emui 5...
So find a way to upgrade to android 7.0 first, then you can flash
custom roms like this based on emui 5.
I hope I have explained the dynamics well...
P.S.: @Dil3mm4, sorry for the spam.. :angel:
Does it work on the L31?
I'm looking for a ROM that work on the Huawei P9 Lite (VNS-L31). Even though it says "ROM for the Huawei P8lite/P8 Lite", some replies contains "Sent from my HUAWEI P9 lite using Tapatalk ". So does it work on the VNS-L31?
Hello Guys,
Samsung start release out Android Oreo for note FE and i tested rom, root, Twrp and Magisk. everything works fine! Follow image to download for with samfirm:
SamFirm_v0.3.6. Works fine here!
https://drive.google.com/file/d/123jOYNiH0Q9AlBxMjwD2T4fEUK-0rhxH/view
Samfirm Donwload:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Or
Link to download directly from sammobile.com:
https://www.sammobile.com/firmwares...n/SM-N935K/KTC/download/N935KKKU3BRD5/216990/
Download from my Mega:
https://mega.nz/#F!m9MkgTJQ!qe0QjJ4ADjBAcbiXLsEXNQ
After download, just extract and flash files through Odin. Odin3_v3.13.1 works fine here!
Odin:
https://forum.xda-developers.com/showpost.php?p=75703449&postcount=276
Tips: If you have root or a custom kernel, maybe you can receive error when you try flash. To solve it you need reflash stock Rom 7.0 to restore you bootloader and kernel then this flash the update for 8.0.
For Root and TWRP with Magisk follow this trend:
https://forum.xda-developers.com/note-fe/how-to/sm-n935f-ds-how-to-flash-twrp-root-t3733030
Tks for @zxz0O0 for samfirm sources.
Tks for @riceplay for root and magisk tutorial
Tks for @kernel.killer for Odin.
Tks for sammy to remember us and for all involved on this update and features!
Hope @LinhPhi9x94 release android 8.0 soon for Note 7.
Donated and thank you again
rokape said:
Hope @LinhPhi9x94 release android 8.0 soon for Note 7.
Donated and thank you again
Click to expand...
Click to collapse
Yes. I'll Port To My Note 7
Is it stable? Any problem yet?
What improvement do you experience?
motfis said:
Is it stable? Any problem yet?
What improvement do you experience?
Click to expand...
Click to collapse
Stable, final release! everything works fine! baterry improve, system are smooth, note 8 apps are here! note8 / s9 AOD is here! S8 camera with stickers and bixby vision! Whats we do not have? Live Wallpapers, Bixby Voice, Dex!
alanhenrique said:
Stable, final release! everything works fine! baterry improve, system are smooth, note 8 apps are here! note8 / s9 AOD is here! S8 camera with stickers and bixby vision! Whats we do not have? Live Wallpapers, Bixby Voice, Dex!
Click to expand...
Click to collapse
Thanks for your post ... What about Spen? All note8 features are included as well ??
Can give me Magisk Root and TWRP?
Does the updated AOD plays GIF?
@LinhPhi9x94. please port rom miui for note 7
alanhenrique said:
Hello Guys,
Samsung start release out Android Oreo for note FE and i tested rom, root, Twrp and Magisk. everything works fine! Follow image to download for with samfirm:
SamFirm_v0.3.6. Works fine here!
https://drive.google.com/file/d/123jOYNiH0Q9AlBxMjwD2T4fEUK-0rhxH/view
Samfirm Donwload:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Or
Link to download directly from sammobile.com:
https://www.sammobile.com/firmwares...n/SM-N935K/KTC/download/N935KKKU3BRD5/216990/
Download from my Mega:
https://mega.nz/#F!m9MkgTJQ!qe0QjJ4ADjBAcbiXLsEXNQ
After download, just extract and flash files through Odin. Odin3_v3.13.1 works fine here!
Odin:
https://forum.xda-developers.com/showpost.php?p=75703449&postcount=276
Tips: If you have root or a custom kernel, maybe you can receive error when you try flash. To solve it you need reflash stock Rom 7.0 to restore you bootloader and kernel then this flash the update for 8.0.
For Root and TWRP with Magisk follow this trend:
https://forum.xda-developers.com/note-fe/how-to/sm-n935f-ds-how-to-flash-twrp-root-t3733030
Tks for @zxz0O0 for samfirm sources.
Tks for @riceplay for root and magisk tutorial
Tks for @kernel.killer for Odin.
Tks for sammy to remember us and for all involved on this update and features!
Click to expand...
Click to collapse
its work with on n935k؟
Can this be flashed on the N935F/DS International version?
Or
Can it be flashed without flashing bootloader?
gcrutchr said:
Can this be flashed on the N935F/DS International version?
Or
Can it be flashed without flashing bootloader?
Click to expand...
Click to collapse
I don't encourge doing that ... they are different ... be patient, it will arrive international versions very soon ...
muayad1981 said:
Thanks for your post ... What about Spen? All note8 features are included as well ??
Click to expand...
Click to collapse
See other coments! Dex, live wallpapers and bixby voice are not present.
Xepher97 said:
Can give me Magisk Root and TWRP?
Click to expand...
Click to collapse
Dear, you just need follow sources in the post. Everything you need are explained in others posts that I shared here.
gcrutchr said:
Can this be flashed on the N935F/DS International version?
Or
Can it be flashed without flashing bootloader?
Click to expand...
Click to collapse
Unfortunate not, this is for korean version! International version has dual sim and other system of archives. Dont flash it!
@OP.
Hello. just a quick question. how were you able to root Oreo? didn't you have to wait 7+ days before being able to root?
Got the oreo update for my FE International version.
Downloading now
[emoji2][emoji2]
Sent from my SM-N935F using Tapatalk
And officially got the OREO update over ota
[emoji4][emoji4][emoji4][emoji4][emoji4][emoji4]
Smoooth and refreshing
Sent from my SM-N935F using Tapatalk
alanhenrique said:
Hello Guys,
Samsung start release out Android Oreo for note FE and i tested rom, root, Twrp and Magisk. everything works fine! Follow image to download for with samfirm:
SamFirm_v0.3.6. Works fine here!
https://drive.google.com/file/d/123jOYNiH0Q9AlBxMjwD2T4fEUK-0rhxH/view
Samfirm Donwload:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Or
Link to download directly from sammobile.com:
https://www.sammobile.com/firmwares...n/SM-N935K/KTC/download/N935KKKU3BRD5/216990/
Download from my Mega:
https://mega.nz/#F!m9MkgTJQ!qe0QjJ4ADjBAcbiXLsEXNQ
After download, just extract and flash files through Odin. Odin3_v3.13.1 works fine here!
Odin:
https://forum.xda-developers.com/showpost.php?p=75703449&postcount=276
Tips: If you have root or a custom kernel, maybe you can receive error when you try flash. To solve it you need reflash stock Rom 7.0 to restore you bootloader and kernel then this flash the update for 8.0.
For Root and TWRP with Magisk follow this trend:
https://forum.xda-developers.com/note-fe/how-to/sm-n935f-ds-how-to-flash-twrp-root-t3733030
Tks for @zxz0O0 for samfirm sources.
Tks for @riceplay for root and magisk tutorial
Tks for @kernel.killer for Odin.
Tks for sammy to remember us and for all involved on this update and features!
Click to expand...
Click to collapse
do you know if with root it is possible to change CSC?
Will Secure folder still work?
thank you
priyansh17 said:
And officially got the OREO update over ota
[emoji4][emoji4][emoji4][emoji4][emoji4][emoji4]
Smoooth and refreshing View attachment 4491932
Sent from my SM-N935F using Tapatalk
Click to expand...
Click to collapse
Does it have RMM?
Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-L2x
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Build 05072018 (Including GApps and SU)
Enjoy!:good:
Can you add support for ATU-L22 too?
pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
It will work on ATU-L22 but I don't have this model, but you can install it
Best regards?
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped
Thespartann said:
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped
Click to expand...
Click to collapse
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!
iDecrypt said:
Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-LXX
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Enjoy!:good:
Click to expand...
Click to collapse
Thank you can you make a video of the ROM ?
It's working for scl-l01?
Kurajmo said:
It's working for scl-l01?
Click to expand...
Click to collapse
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.
Thespartann said:
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.
Click to expand...
Click to collapse
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
y62018 said:
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!
Click to expand...
Click to collapse
Ah. As GSI images work in another way, you will have to wait until TWRP comes for your device.
Or if your rom is already rooted you could install Magisk directly from the Rom
If you want to restore Stock you should download Ereocovery from here: https://mega.nz/#!6eplUQAB!K4hfh2s-b_sSVSJ_Xxg65sywdpJHNRKtzs2ZMRr2bVk
Flash it from Fastboot.
After that get the stock rom for your device( An update.zip that should contain an update.app)
Something like this: http://huawei-firmware.com/rom/huawei-y6-2018/atu-l21/19931
And just do what it says here
Good luck
Hi, thanks for your notes about flashing stock rom.
Will try it out once I find the update file or the firmware.
Thank you!
pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
I will upload a new build later which includes the gapps
Best regards ?
That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!
Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.
Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
You do know that creating a new forum isn't all that easy, right?
Also even if a new forum is made it'll be a subforum in our main fourms.
Also it clearly says (2018) in the title.
Thespartann said:
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.
Click to expand...
Click to collapse
Don't be mad, its not my fool you create thread in Y6 2015 forum. Without scl-l01 support rom.
It's your fault and problem not mine.
Almost all custom roms available here have support multiple Y6 version of this phone.
You are not God, and not only one Active developer here. It's big community, with many Y6 available version of this phone.
That's why i just ask.
Not like my comments? Fine, but don't be rude against other people how just ask.
That's all from me.
y62018 said:
That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!
Click to expand...
Click to collapse
Build 05072018 (Including GApps and SU)
Here with GApps and SU activatable with developer options
Wow..that was fast!
Will try it out, thanks a lot! :good:
y62018 said:
Wow..that was fast!
Will try it out, thanks a lot! :good:
Click to expand...
Click to collapse
No problem!
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial LineageOS 16.0 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer.
Known Issues
None
Instructions
Flash TWRP recovery via Odin.
Boot to TWRP recovery (Vol UP + Home + Power).
Optional: Wipe data / Factory Reset
Install the ROM (Lineage zip).
Optional: Install Magisk to get root.
Install the Google Apps (Open GApps 9.0).
Enjoy!
Downloads
All: https://www.androidfilehost.com/?w=files&flid=43918
LineageOS 16.0: lineage-16.0-20191212-UNOFFICIAL-ks01ltexx.zip
TWRP: twrp-3.3.1-1-ks01ltexx.tar
Recommended Bootloader/Modem: I9506XXSDPL2_I9506XXUDOJ2_bootmodem.tar
Sources
https://github.com/kyasu/android_kernel_samsung_msm8974
https://github.com/kyasu/android_device_samsung_ks01ltexx
https://github.com/kyasu/android_vendor_samsung_ks01ltexx
XDA:DevDB Information
[ROM][GT-I9506][ks01ltexx] LineageOS 16.0 UNOFFICIAL for the Galaxy S4 LTE-A, ROM for the Samsung Galaxy S4
Contributors
kyasu, LineageOS Devs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2018-09-30
Last Updated 2019-12-12
Reserved
thank you
Looking forward to progress this will be taking and thank you for keeping this phone alive.
Thanks you very must
Thank u very much the best?
Feedback
Hi Kyasu, happy to report that its working fine even with a dirty flash from AEX ROM. It all looks very good considering its an early build. My phone is a Korean SHV E330s running DPH1 baseband firmware.
Camera that came bundled with Los doesn't seem to work, I use a Nokia camera port which works fine.
I will hold off on feature issues cause I don't know how many are LOS issues. A key observation was that ambient display was not working on receiving new notifications (screen not waking up).
Feedback
Hey , thanks for your great work !!!! The rom are great but where is the pie's navbar :v .... And when will the new update come out ??
Sorry for my bad english :v !!! GREAT THANKS FROM VIETNAM
:good::good::good:
kyasu said:
This is an unofficial LineageOS 16.0 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer.
Known Issues
SELinux is permissive.
NFC
...
Click to expand...
Click to collapse
@kyasu, how can we best help? do you wish for a list of non-working features? logcats on crashes or feature failures? or both? or is it even too early for those.
NamLesnar said:
Hey , thanks for your great work !!!! The rom are great but where is the pie's navbar :v .... And when will the new update come out ??
Sorry for my bad english :v !!! GREAT THANKS FROM VIETNAM
:good::good::good:
Click to expand...
Click to collapse
Please don't ask for ETAs on new updates. It is seen as disrespectful throughout the community. Please be patient and wait or find another ROM to use.
Thanks!
Weapon X said:
Please don't ask for ETAs on new updates. It is seen as disrespectful throughout the community. Please be patient and wait or find another ROM to use.
Thanks!
Click to expand...
Click to collapse
Okay so sorry about that i didn't know it anyway thanks . I'm gonna wait for the stable version
Works fine!(SHV-E330L)
I hope you are fixing style option well.
zames94 said:
Works fine!(SHV-E330L)
I hope you are fixing style option well.
Click to expand...
Click to collapse
Any good rom for SHV - E330L ?
Well, do you need function to make call or send message ?
You want to use these function... you can find lineageOS 14.1 kor (idk who made this)
Or not, i recommend kyasu's lineageOS 15.1
And Darkness's custom rom series (Oreo)
Those are p stable so u can using safely..
Anyway, Have a good day!
Hey all!
Holds on to download LineageOS16.0. Now I wonder why there is such a huge slow connection to the download mirrors? It will take you all day to download this.
Is very annoying
Try with another mirror. I selecto wasington mirror and download fast
Denstore said:
Hey all!
Holds on to download LineageOS16.0. Now I wonder why there is such a huge slow connection to the download mirrors? It will take you all day to download this.
Is very annoying
Click to expand...
Click to collapse
Enviado desde mi GT-I9506 mediante Tapatalk
jegogo99 said:
Try with another mirror. I selecto wasington mirror and download fast
Enviado desde mi GT-I9506 mediante Tapatalk
Click to expand...
Click to collapse
The sad thing about that answer is that I have already tried all the 4 mirrors that were offered to me at the moment. and none of the mirrors had higher downloads than 145kb / sec
Denstore said:
The sad thing about that answer is that I have already tried all the 4 mirrors that were offered to me at the moment. and none of the mirrors had higher downloads than 145kb / sec
Click to expand...
Click to collapse
It worked fine for me, however I had similar problems in the past with afh. Usually restarting the download fixed it tho.
This is my daily driver right now. Will keep an eye on battery use, but seems OK so far, phone going into deep sleep no issues.
SHV E330S users, when the ROM boots you will see no simcard error, wait for a seconds till ROM fully boots and the network will appear.
Thanks kyasu
YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
* Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *
Device SM-G611F, M, DS (and ohter wr.)
optimized stock based high performance stable custom rom for j7 prime 2 (G611**)
(can be used on other models but there is a camera error)
estra features some apps from android Q will have Dolby support and busybox
Coming with version 2.0
One, ROM for the Samsung Galaxy J7 Prime2
>>One Uİ 1.1 version
>>9.0.0 Pie firmawe stock base
>> ROM: ONE
>> Kernel version: 3.18.91-(stock)
>> Android SDK: 28
>> SElinux state: Enforcing
>> CPU: Samsung Exynos Samsung ON7XREF LTE SWA rev01 board based on Exynos7870 rev 5
>> CPU arch: armeabi-v7a
>> CPU governor: interactive
>> RAM available: free ram
>> Display size: 1080x1920
>> Display density: 420 dpi
>> ROOT: 20.0:MAGISKSU
>>DeKnox
>>Debload
>>Performance
>>Etc..
ROM 1.0 link:
https://mega.nz/#!ImwXCAxB!L7wYDcgvaJqfWspMZikICkCv5IR7aGs17iIka4XtpZg
Make Flash with twrp
Update package
#Disables Error Checking
#Screen Mirroring
#Signal Performance
#Launcher Is Kept in Memory
#Smooth Video Stream
#Video Acceleration On
#RMM Fix
#Knox disable
#Disable OEM Unlock Toggle
#SafetyNet Fix
#Enable Faster Boot
#Boot & Shutdown Animation FPS Boost
#Editing Dolby
#Editing Debloat app
#New Performance app(vulmax 2.1 EAS)
#S10 Q smart Capture app
Update package link
https://mega.nz/#!hiZD2a5R!kFvOlx6k0dLUWzKAIVOHzd7XJUjU9uJpmdJyJ1bJh_U
Note:
first install rom then install update package
Noteackage is not rom
some devices have data connection problem please make backups to your memory card(usb/otg)
XDA:DevDB Information
ONE, ROM for the Samsung Galaxy J7
Contributors
Marqos73
Source Code: [url]http://Samsung[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Nougat
Based On: Stock base
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-10-13
Current Beta Version: 3.1
Beta Release Date: 2019-10-01
Created 2019-10-23
Last Updated 2019-10-29
please add a screenshots
bjpp21 said:
please add a screenshots
Click to expand...
Click to collapse
https://youtu.be/aKdHNfO67QA
I flashed the Rom on my J7 Prime 2(G611F). Everything is fine but the problem is TWRP. It becomes unusable. We can not make a backup or recover anything. The internal disk displays 0 megabytes.
Sandra Perry said:
I flashed the Rom on my J7 Prime 2(G611F). Everything is fine but the problem is TWRP. It becomes unusable. We can not make a backup or recover anything. The internal disk displays 0 megabytes.
Click to expand...
Click to collapse
please try a different twrp version
Marqos73 said:
please try a different twrp version
Click to expand...
Click to collapse
I used version 3.2.1 and version 3.2.3 but unfortunately the recovery program TWRP can read a USB but it can not read the internal memory and it is impossible to flash another Rom.
* I installed the official Rom (android 9). I flashed TWRP, I routed the device. All is OK except that TWRP does not recognize the internal disk. To solve the problem and flash any Rom, I was forced to flash the official Rom (Nougat 7.1.1).
* With Nougat 7.1 TWRP works properly and I can flash any custom Rom.
front camera not working
lavi.bmp said:
front camera not working
Click to expand...
Click to collapse
How to you devices
Sandra Perry said:
I used version 3.2.1 and version 3.2.3 but unfortunately the recovery program TWRP can read a USB but it can not read the internal memory and it is impossible to flash another Rom.
* I installed the official Rom (android 9). I flashed TWRP, I routed the device. All is OK except that TWRP does not recognize the internal disk. To solve the problem and flash any Rom, I was forced to flash the official Rom (Nougat 7.1.1).
* With Nougat 7.1 TWRP works properly and I can flash any custom Rom.
Click to expand...
Click to collapse
Available Twrps (G610) nougat based And unfortunately They don't work properly for the G611 pie I always want to help if you find a missing non-rum related one.
Sandra Perry said:
I flashed the Rom on my J7 Prime 2(G611F). Everything is fine but the problem is TWRP. It becomes unusable. We can not make a backup or recover anything. The internal disk displays 0 megabytes.
Click to expand...
Click to collapse
That means your internal storage is encrypted, try change to another kernel or flash no opt no encrypt zip on Oxygen kernel page and format /data
Marqos73 said:
How to you devices
Click to expand...
Click to collapse
G610F
lavi.bmp said:
G610F
Click to expand...
Click to collapse
For the G611xx, I told you there was a camera error on the other models.
TheRealModder said:
That means your internal storage is encrypted, try change to another kernel or flash no opt no encrypt zip on Oxygen kernel page and format /data
Click to expand...
Click to collapse
no-vertiy-opt-encrypt-6.0 file try
https://mega.nz/#!Aq5RlAaT!YLK4Ed7yzUwVDEpELlJrKyWHJWITkacB82qr0v3PD2s
Marqos73 said:
no-vertiy-opt-encrypt-6.0 file try
https://mega.nz/#!Aq5RlAaT!YLK4Ed7yzUwVDEpELlJrKyWHJWITkacB82qr0v3PD2s
Click to expand...
Click to collapse
Yeah, try that...
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
lavi.bmp said:
G610F
Click to expand...
Click to collapse
Use BBOS or Venom OneUI or T.R.R. OneUI
That ROM is for G610X
Link doesn't work...?
XanthicZet said:
Link doesn't work...?
Click to expand...
Click to collapse
link is new :good:
Is there a working twrp for SM-G611M?
I've tried searching everywhere for almost a day,
I can't find any working twrp for my device.
I'm on Android Pie with latest security update (Nov. 1, 2019).
Please someone give me a download link for twrp for sm-g611m.. please!! please!. I really need this...
Hello, I am new to flash for samsung, could you give me some instructions or a tutorial on youtube to follow the steps? thanks in advance bro
can i flash this rom on galaxy on7 prime SM-G611F. Running android pie.