Database Develop

No bootloader and no gps - need help

Hello. Iam having trouble with my friends hw6515 .
My friend tried to Rom upgrade his hw6515 , somehow that rom upgrade failed and he couldn't load Windows , it was the first time he tried flashing a rom so he didn't think about trying to reflash it again .
So he gave me his hw65615 and asked me to make it work .
I downloaded the latest hw6515 rom from HP's website , flashed and loaded windows , and there started the problems .
1. GPS stopped working .
2. I cant get into bootloader mode anymore , so I cant flash other roms , holding power button and pressing reset with the stylus just resets the device .
any suggestions ?
Thank you.

hi hi
to enter the boot loader you nedd next key conbination :
power+camara+joystick+reset
and try to reflash you beetle
enjoy it

Thank you !

okok
does it works??

ok , the bootloader work .
Ive downloaded the latest Rom from HP site , when I try to upgrade it says wrong SKU , and that my devices firmware is Unknown .
any solutions for this problem ?

tellme the specs and model correct of your device and the 3 first numbers of your imei plz

The model ID is : hp iPAQ hw6515c
the IMEI is blank .

what the imei is in blank??? do you had a sim card on the phone or what a hell do in that device

[Q] Update pre release firmware on Nokia Lumia 620.

Hi guys , After a month of searching the whole internet , I was not able to find the solution to my problem , so this is my last hope.
I was gifted a Nokia Lumia 620 by a friend who used to work for Nokia( Now left and in very bad terms with the company ). The phone works like charm and has not given me any kind of trouble. Till a month back I found that I was not able to update the firmware of my phone. On checking the net , I found that the phone's firmware version was a pre-release one i.e. 1030.5603.1249.003 ( This phone was released with 1030.5603.1250.00x in my country India ). So i tried to manually update by downloading the updated firmware .To my surprise I could not find the firmware for my product code which is 059N7C6 . Instead I downloaded firmware of other product code but of same RM-846 . Tried to flash the phone using NCS but could not. I was not able to bring it to the flash mode. Tried every method out there ( Vol down & power , Vol down & power then vol up ) but could not. Actually even keeping the vol down and power button pressed for like 10 min I dont get the vibration( except when the phone is switched off and when i try it , then the phone just switches on.). But as soon as I release the buttons I get a vibration . Is this the vibration that all the methods talk about?? But even after this I get an error message during the recovery method of flashing. I have also tried the refurbish method by changing the product code. The phone goes to go the flash mode and the flash starts but again an error occurs . In both the cases the error i get is " Message not send " .so my questions are :
1. Is my phone a demo phone ? (i dont think so coz my phone works like charm and performs all the functions )
2. Is there any process to update this pre release firmware ?
3. Have i downloaded the firmware of wrong product code ? (FYI i had downloaded the firmware of product code 059R680 EURO1 GB DEVELOPER DEVICE by using NCS coz i could not find the firmware pertaining to my region )
4. Is there any other method to enable the flash mode on the phone ?
This forum is my last hope. Don't want to ditch this phone cause of no updates . Thanks in advance.

unlock, root, efs backup, install custom firmware from on a branded GT-I9000

Hello Folks,
the last days I have read so much, but all tutorials I read are pretty old or lead me in a dead end road.
Could somebody give me some infos what to do and how I get to a good result for my dad's Samsung GT-I9000
Unfortunately I have no windows computer here, which gives my headache with tutorials based on a windows connect. what I have:
- Mac OSX 10.10.4
- Heimdall 1.4, Kies, SmartSwitch installed
- Samsung Galaxy S i9000 (branded from 3 Austria - Hutchinson)
this phone was unlocked from a shop before, but my dad got no "unlock number". it has worked unlocked for some years. I wanted to try out if I can get into recovery by pressing "Vol.Up - ON" (no home button) and it just restarted. since then I get the popup for using "unlock PIN". even a working 3 SIM card from a friend does not work anymore. Android Eclair just shows a SIM symbol in the upper right corner with a red exclamation mark.
If possible, I want to update to a pretty new Android. I have read the post here that Coderom with Android 5.1. even runs on this model fine.
If I would like to jump from this pretty old firmware to such a new one, do I need to root, unlock it first and flash step by step newer Android version? or is it possible to flash the Coderom immediately (after root, unlock and probably a recovery installation)?
If a custom ROM is flashed, is the phone still SIM locked?
Modell GT-I9000
Firmware Version 2.1-update1
Basebandversion I9000NEJG1
Kernel Version 2.6.29 [email protected] #2
Buildnumber ECLAIR.NEJG3
IMEI is shown
IMEI is shown
WLAN-MAC-Adress is shown
Bluetooth-MAC is shown
*#1234# shows:
PDA: I9000NEJG3
Phone: I9000NEJG1
CSC: I9000DREJH2
*#7465625# results in:
Netzsperre {on} /// netlock
Teilweise Netzsperre {off} ///partly netlock
SP-Sperre {off} /// SP-lock
CP-Sperre {off} /// CP-lock
-------------
First I have tried to backup the important data from the phone (only contacts and photos).
Until now I could not backup the efs folder/partition. (probably I need root first, right?)
I could hardly connect Kies with the phone, but I have not got any data with it. And I got an initialise error if I wanted to update (so 2.2 or 2.3 was not possible). An info box showed to use Smartswitch.
So I have used Smartswitch on the Mac and could connect via USB to the I9000. I have seen public folders and made a backup of the contacts and pictures. An upgrade was not possible too. Thus, the 3 branded Android Eclair is still on the phone.
With "Vol.Up - ON - Menu" boots the recovery.
With "Vol.down - ON - Menu" boots the yellow construction figure state for Odin. (download)
No play-store on the phone. Only google market (where I have not found anything useful). I have searched on apkmirror and could not really find apps for Android 2.1.
---------
what would you suggest to do and in which sequence? (without windows)
- root
- unlock
- backup efs folder
- install clockwork mod
- format somehow f2fs ?
- flash coderom
(do I have to care about german language too? or are most distributions CM etc. multi language?)
thanks for any help!
Michael

It is strange, I have problems now to get into that recovery with the three button combination. Downloading modus works fine.
=>>> Now I got it....I must hold all 3 buttons the same time and wait 2 times for the Samsung logo. After that, I need to leave the power button but not the other 2. That starts the Samsung Recovery.

Help needed:strange S3 mini became sim locked after installing custom rom

Hello ,
I hope that someone could help me !
My friend ask me to mod a galaxy s3 mini i8190n .
It was bought in UK (used from a shop) , but from the splash screen i saw that it was original from french (SFR carrier).
Before do everything i checked the IMEI displayed and it was the same of the sticker behind battery (it was ok) and i saved the original firmware code .
The phone was working properly with an uk sim , so i didn't think that it was sim locked .
I rooted the phone and made a backup with CWM.
After i saw the last release of cyanogenmod 12.1 , i flashed TWRP and CM12.1.
I didn't try with sim inserted at the beginning . After all wipes the system was unstable (reboot , black screen etc ) .
So i tried to flash the Resurrection Remix (last release) that worked better .
With the last rom i tried 2 sims (perfect working in other two phones) and both are not recognized (no sim icon).
No message for unlock the phone on starting was displayed!
I thought at that moment that probably the phone could have some problem with flashed roms.
I decided to reflash CWM and restore the original firmware from backup . The problem persisted (no sim ).
So i found the original rom on sammobile and flashed it . No sims recognized as well !
Imei was the same with all roms , so i think that the EFS folder is good !
I read a lot and discovered that the sim unlock is stored in a protected memory area , so i think i couldn't delete the unlock ... If it had been unlocked before being sold. Am i right ?? And i would like to exclude an hardware problem .. because the phone was working properly before the modding!
What could I do for resolve this problem? The phone is not mine and i'm so sorry to have made a mess!
Thanks in advance for any suggestion.
This is the orginal firmware version

Just wondering if you resolved this problem. I had the same problem - no SIM working on any custom ROM. I could only fix it by re-flashing stock Recovery in Odin, and then Re-flashing stock ROM also in Odin.

Xperia Z1 freezes very soon after startup!

Hi guys,
Since yesterday I got a problem that soon after startup my phone freezes. When it freezes I have to hard reset the phone(power button+vulune up). Before that my phone was working fine. but I wanted to reset my phone to clear up some space. I did that by going into the TWRP recovery and wiped cache, data, dalvik, internal/external storage and system. Because I deleted the system partition TWRP said there was no OS installed. This was very stupid that I wiped the system partition. But I thought that I could just flash the stock firmware back in flashtool so i did that. But now my phone freezes very soon as it started up. so I cant even complete the setup of the phone.
There was one thing that stud out to me. That was an error that I got when flashing the firmwares. the error was: warn - unit 2212 not found in bundle. Maybe this means something. I googled it but couldn't find a solution to the error message.
The things I tried:
-Flashed the stock firmware(centrel europe 1, central europe 5, customized netherlands)
-Flashed the stock firmware + flashed 2 different(kernel 1 and 2) custom kernels(centrel europe 1, central europe 5, customized netherlands)
-Flashed this kernel and installed this rom
-Flashed the boot.img from the lastest CyanogenMod 12.1 build and installed that rom
I did all this and it was always the same problem. I don't know what to do anymore. I hope you guys can help me. If u need more info I will try to give that.
Ive spend my whole day searching for an solution for this problem. But still I havent found any solution.
additional info:
Phone: Xperia Z1(honami)
Model:C6903
Carrier: KPN
Country: The Netherlands
TA partition: Lost/not backed up
DRM status: Lost
Links to all the roms, kernels, firmwares I used:
Kernels: kryptonian kernel(venkat kamesh), OK kernel(olokos)
ROMS: kryptonian rom of awesomeness(venkat kamesh), latest CyanogenMod 12.1(CyanogenMod)
Firmwares(from XperiFirm): 14.6.A.1.236(central europe 1), 14.6.A.1.236(central europe 5), 14.6.A.1.236(customized NL), 14.6.A.1.236(KPN)
The firmwares were downloaded using Xperifirm in flashtool.
The firmwares were flashed with delete USERDATA and APPS_LOG checked(screenshot).
flashtool was fully up to date(0.9.23.2)
I will upload a video tomorrow on youtube so that you can see what is exactly happening.
8/4/2017 22:05(10:05PM)
- Not all links updated, thread not fully finished.
8/4/2017 22:35(10:20PM)
- Screenshot added, links updated, little text error's changed(my English is not that good )
9/4/2017 08:50(08:50AM)
- Added DRM status, TA partition status

MiniKoelkast said:
Hi guys,
Since yesterday I got a problem that soon after startup my phone freezes. When it freezes I have to hard reset the phone(power button+vulune up). Before that my phone was working fine. but I wanted to reset my phone to clear up some space. I did that by going into the TWRP recovery and wiped cache, data, dalvik, internal/external storage and system. Because I deleted the system partition TWRP said there was no OS installed. This was very stupid that I wiped the system partition. But I thought that I could just flash the stock firmware back in flashtool so i did that. But now my phone freezes very soon as it started up. so I cant even complete the setup of the phone.
There was one thing that stud out to me. That was an error that I got when flashing the firmwares. the error was: warn - unit 2212 not found in bundle. Maybe this means something. I googled it but couldn't find a solution to the error message.
The things I tried:
-Flashed the stock firmware(centrel europe 1, central europe 5, customized netherlands)
-Flashed the stock firmware + flashed 2 different(kernel 1 and 2) custom kernels(centrel europe 1, central europe 5, customized netherlands)
-Flashed this kernel and installed this rom
-Flashed the boot.img from the lastest CyanogenMod 12.1 build and installed that rom
I did all this and it was always the same problem. I don't know what to do anymore. I hope you guys can help me. If u need more info I will try to give that.
Ive spend my whole day searching for an solution for this problem. But still I havent found any solution.
additional info:
Phone: Xperia Z1(honami)
Model:C6903
Carrier: KPN
Country: The Netherlands
Links to all the roms, kernels, firmwares I used:
Kernels: kryptonian kernel(venkat kamesh), OK kernel(olokos)
ROMS:kryptonian rom of awesomeness(venkat kamesh), latest CyanogenMod 12.1(CyanogenMod)
Firmwares(from XperiFirm): 14.6.A.1.236(central europe 1), 14.6.A.1.236(central europe 5), 14.6.A.1.236(customized NL), 14.6.A.1.236(KPN)
The firmwares were downloaded using Xperifirm in flashtool.
The firmwares were flashed with delete USERDATA and APPS_LOG checked(screenshot).
flashtool was fully up to date(0.9.23.2)
I will upload a video tomorrow on youtube so that you can see what is exactly happening.
8/4/2017 22:05(10:05PM)
- Not all links updated, thread not fully finished.
8/4/2017 22:35(10:20PM)
- Screenshot added, links updated, little text error's changed(my English is not that good )
Click to expand...
Click to collapse
1st: Finally someone who does a proper report with all information needed, have a few thumbs :good::good::good:
2nd: Your English is fine
3rd: You should use the tool Emma. It's been free for a few years now. You can find it on the web, I remember having seen it on chip.de some time ago.
This tool is exactly what you need and has saved my phone's ass more than one time.
It basically un-does any software modification you've ever done and enables you to start from scratch!

Kaffeetrinker said:
1st: Finally someone who does a proper report with all information needed, have a few thumbs :good::good::good:
2nd: Your English is fine
3rd: You should use the tool Emma. It's been free for a few years now. You can find it on the web, I remember having seen it on chip.de some time ago.
This tool is exactly what you need and has saved my phone's ass more than one time.
It basically un-does any software modification you've ever done and enables you to start from scratch!
Click to expand...
Click to collapse
Thanks you for your answer on my post!
Unfortunately Emma didn't solve my issue. I tried it several times with 3 different firmwares(those were the only available). I also relocked the bootloader and tried reparing the phone through Xperia Companion. But that gave the same result. I made a video were you ca see the problem. The link will be in the post 60 minutes after this post. I hope my problem will get solved!
Thanks for your time!

I think I found the problem!
So I think that the SD card is the problem. When I installed a firmware trough Emma I took my SD-card and Sim-card out and put them in my backup phone(so people could just call me etc.). And then suddenly the phone worked. I first put in my Sim-card in my phone so I could install whatsapp and have my contants loaded. Then I plugged my SD-card in and after 3-5 minutes the phone froze. So I think it's the SD-card. I am not sure yet but I am going to do some more tests with different SD-cards. I will let you know every update!