hello guys
do you face disconnection when u walk with ur bluetooth headphone?
does this mean that mi5 has bad bluetooth quality or it has same bluetooth with samsung devices?
i mean is this comon problem or whith mi devices is seen?
need ur opinions
> do you face disconnection when u walk with ur bluetooth headphone?
No, my bluedio H+/T2+ and q26 are still connected fine to around 5-8 meters. The wireless chipset is integrated with SoC, should be the same across all SD820.
Related
hrm this isnt good - it would appear bluetooth stops working when wifi is enabled - was listening to an mp3 on bt stereo headphones and enabled wifi and it killed the conn - not only that it seems i cant use any form of bt device if wifi is enabled (not even connected) on the device - wtf?
is anyone else experiencing this?
No, I use Jawbone BT headset with all sounds out BT using BTaudio.exe then start WiFi on home LAN and watch streaming video from Slingbox.
this was the case with the titan...
eric b
do i have a faulty unit?
i don't think so. in the titan, the bluetooth and wifi antennae were the same actual unit.
eric b
you sure? remE says both work at the same time just fine for him :s
to me it seems as thought ewifi signal is overpowering the bluetooth or smt - does the bluetooth freq lie in the wifi freq range or smt? is there any way they could overlap?
both work if i have only one on at a time - can anyone confirm either way if both work at the same time for them and what equipment youre using?
I'm doing it as a type this. I'm watching 30fps video streaming at 300k over WiFi and listening to it thru a Jawbone BT headset. For sure this works fine.
I have a Hermes and it would not do this well at all, it would allow BT and 3G video streaming but not WiFi. Kaiser can handle it.
maybe you could try a differet BT headset, maybe yours suffers from inteference ( i don't know the frequencies of BT and WiFi but WiFI could be killing the connection because your headset jamms)
BT and WiFi are both spread specktrum radios operating at 2.4ghz. They are designed to co-exist and do so on Kaiser. Maybe there is a difference with Stereo vs Mono headsets, they do use different BT profiles. If I get a chance I'll try a stereo set and report back.
thanks guys - i need to make sure my unit is duff before i ssend it back for a replacement ;(
looks like my unit is gonna go back - i called htc and they said they havent heard of this issue before and are 'escalating it' - it seems that superetrader wont give me an RMA for my unit until htc have given me a reference number - is this normal procedure? seems a bit odd to me
i tested my unit some more at work today with a whole host of different bluetooth and wifi gadgets and the problem is consistently reproducable
gutted
Friends ...... , HTC One it seems has a terrible Bluetooth range ....... I have a Logitech BoomBox (Bluetooth spks) and a Belkin Bluetooth receiver connected to my AVR. In both the cases, when connected to my HTC One it looses audio in just couple of feets. Specially with belkin receiver. But when I tested the same with my iPhone 4, it works perfectly, till the Bluetooth's designated range of 30 feet (10 meters) ... with both Belkin and Logitech ....
so it has something to do with HTC One's Bluetooth.
People with HTC One and having any Bluetooth audio device, please test this and report if you are also facing the same issue, Or is there something that I can try to increase the range. Its pathetic, 2-3 feets at the max. I am bitterly disappointed with this ..........
Regards.
Sammy
I think that Android 4.1 had a BT flaw that was fixed in 4.2.
so this means its more of an android issue than HTC One........ any alternatives to improve this, till we have an 4.2 update
I was using bt audio yesterday and it was horrible. I did some googling, try turning off wifi before you connect to the speakers, it solved my trouble straight away. I found if the music was playing when I turned wifi back on it would still be ok. Might help?
jiggle_ said:
I was using bt audio yesterday and it was horrible. I did some googling, try turning off wifi before you connect to the speakers, it solved my trouble straight away. I found if the music was playing when I turned wifi back on it would still be ok. Might help?
Click to expand...
Click to collapse
Jiggle .... my friend, you made the day for me, how so ever strange may it seem, it did work .... ..... I switched of my wifi and then connected Bluetooth to Belkin receiver and vola!! :victory:... no drop outs and was able to use BT at full 30 feets, and then if I switch on the wifi later all is well.
Strange, if wifi is working before I connect BT, it drops and is very uneven ......... must be some bug, but anyway, solution is not as irritating as one might expect.
Thanks again Jiggle, for you input, saved me a great disappointment.
Regards
Sammy
sam9s said:
Jiggle .... my friend, you made the day for me, how so ever strange may it seem, it did work .... ..... I switched of my wifi and then connected Bluetooth to Belkin receiver and vola!! :victory:... no drop outs and was able to use BT at full 30 feets, and then if I switch on the wifi later all is well.
Strange, if wifi is working before I connect BT, it drops and is very uneven ......... must be some bug, but anyway, solution is not as irritating as one might expect.
Thanks again Jiggle, for you input, saved me a great disappointment.
Regards
Sammy
Click to expand...
Click to collapse
whew you had me in a panic here. (o; I'm still a little traumatized from my asus T201 wireless issues.
The Wifi/bluetooth issue is a drawback of the aluminum body design of the One. Bluetooth shares an antenna with wifi transmit. I believe wifi receive shouldn't interrupt bt though.
Then there should also be a problem if I switch on wifi after I connect BT. ,... in which case it works. It only creates a problem, if the wifi is first on and then I connect BT. ...... which is strange
Just for information. I had 3 htc, desire hd, sensation, onex and ALL had problem with bluetooth, weak signal, using a headset with the phone in my pocket already failed. I now have a note2 and this problem does not occur, being used in the same situation. So ....
sam9s said:
Then there should also be a problem if I switch on wifi after I connect BT. ,... in which case it works. It only creates a problem, if the wifi is first on and then I connect BT. ...... which is strange
Click to expand...
Click to collapse
My m7 (TrickDroid, elementalX 0.11 default overclocking and undervolting) is having the BT issue whenever wifi is on, regardless of whether I connect the BT device while wifi is off, and regardless of whether audio is playing when the wifi is turned back on. In other words, on my device, BT really really sucks if wifi is connected, period. Any suggestions other than not to use wifi if I want to use BT?
Update: My router (Netgear wnr2000v3) seems to use 2.4 Ghz channels. Any thoughts about whether swapping the router with a dual-band or 5 Ghz channel router would work around this issue?
pcadvocate said:
My m7 (TrickDroid, elementalX 0.11 default overclocking and undervolting) is having the BT issue whenever wifi is on, regardless of whether I connect the BT device while wifi is off, and regardless of whether audio is playing when the wifi is turned back on. In other words, on my device, BT really really sucks if wifi is connected, period. Any suggestions other than not to use wifi if I want to use BT?
Update: My router (Netgear wnr2000v3) seems to use 2.4 Ghz channels. Any thoughts about whether swapping the router with a dual-band or 5 Ghz channel router would work around this issue?
Click to expand...
Click to collapse
I did pick up a new dual-band router and set up the phone to connect only on the 5Ghz band, and it worked! No more bluetooth issues at home. So if you run into this issue, a temporary workaround until (hopefully) HTC/Google provide a fix is to avoid the 2.4Ghz band.
Strangely enough, my Bluetooth range keeps decreasing with each software update. When I first bought this thing, I was generally impressed with how far I could walk from my BT speakers. Not as good as my evo 4g or 3d, but decent. Better than my gs3 and gn2.
Now I tend to make it about 5 feet or so with minor cut-outs while using apt-x. If I put my hand between the signal at 10ft, I can stop it completely. If I touch the upper-right of my phone with my thumb as I hold it in my right hand, I can kill the signal as well. Very much an antennagate going on here just like the iPhone 4.
My new Note 5 (SM-N920I) has problems with bluetooth. I can not connect to my car, nor to my headset. However I can connect to my Sony Vaio and my smarthwatch Gear Fit (although sometimes it is disconnected) .
From what little I could see , there is a problem with bluetooth in Note 5, but still no solution.
Someone knows a solution to work properly ?
Thank you
MaxiBlanc said:
My new Note 5 (SM-N920I) has problems with bluetooth. I can not connect to my car, nor to my headset. However I can connect to my Sony Vaio and my smarthwatch Gear Fit (although sometimes it is disconnected) .
From what little I could see , there is a problem with bluetooth in Note 5, but still no solution.
Someone knows a solution to work properly ?
Thank you
Click to expand...
Click to collapse
I had a problem too. I could connect but the range was very short then it would cut out. I replaced it.
With the new one, is rhe problem gone?
Bluetooth overall is much better for me than on my Note 4. I've not had trouble connecting to the six devices I use. There's some funkiness with my Gear S when reconnecting via BT after being connected remotely but that could easily be Gear Manager and not the phone. Range does seem a bit shorter but reconnections are a lot faster and more reliable. BT on any device is a big YMMV because of all the different devices being connected.
I use Remote Phone (https://justremotephone.com) for handeling calls at work. Remote Phone uses bluetooth handsfree profile for the purpose of controlling my phone from the laptop.
When my phone is connected to my laptop with Phone audio, Input device and Contact sharing enabled, it can only connect to my BT headset using Input device and Contact sharing.
When my phone is connected to my BT headset or a BT-speaker with handsfree-support (e.g. my car) with Phone audio, Input device and Contact sharing enabled, my smartwatch (Gear S3) looses Phone audio (or disconnects).
When my phone is connected to my smartwatch (Gear S3) with Phone audio, Input device and Contact sharing enabled, it often fails to register and automatically connect to other known devices.
It would seem that the N8 Sirocco can not connect to multiple devices using Phone audio profile.
I have sendt an e-mail to Nokia support addressing this issue, and will post the answer here.
I'm still on Android 8.0.0, and hopefully this is a SW-problem that is corrected in 8.1.
I'm guessing there is not so many N8 Sirocco owners out there yet, but of the few that is out there, has anyone else experienced similar BT handling issues?
This might not be a problem with the N8 Sirocco, but a problem with BT handling on the Gear S3.....
i have a major BT connection issues with my GEAR s3. It doesnt pair at all. the process gets stuck on the galaxy and stars moving around and saying setting up your device. Any help on how to connect my gear s3?
solution?
MrMastodon said:
This might not be a problem with the N8 Sirocco, but a problem with BT handling on the Gear S3.....
Click to expand...
Click to collapse
Hi MrMastodon. Did you solve the topic? As I have similar issue with Nokia 8 and car BT device + GPS BT tethering...
I completely forgot to follow up, it turns out that the Galaxy Gear is known for causing exceptionally bad Bluetooth-performance when paired with non Samsung devices.. I sold it.
Hello to all. My problem is that when i use bluetooth while connected with wifi, the wifi bandwidth becomes low.
I want to know if this happens with you too?
This is knowing problem. Bluetooth and wifi works on 2.4ghz. Which causes too much disruption. Especially in old mediatek processors. Only way to fix this is connect to the wifi on 5ghz...
psone1 said:
This is knowing problem. Bluetooth and wifi works on 2.4ghz. Which causes too much disruption. Especially in old mediatek processors. Only way to fix this is connect to the wifi on 5ghz...
Click to expand...
Click to collapse
Is there this problem with the Realme 10 (Helio G99)?
I don't know, try ask on realme 10 forum. Helio g95 and 99 was the same soc ...
With fw c17 I'm experiencing frequent bluetooth disconnections.