I cannot even find the bluetooth headset on my diamond.
My bluetooth headset is I-Tech Arrow Lite-R. Bluetooth specification is v2.0 + EDR class 2. It is not a stereo headset.
Why cannot it be found? The headset works well with my previous cell phone.
By the way, the moto S9 stereo headset can be found and connected with my diamond.
I wonder whether a non-stereo headset can be used with diamond.
I just wanted to buy a stereo bluetooth handsfree for my device and finally I decided to buy an EverE T909s about 40 $...
it pairs correctly and fully to the device and music sound is good... but when there is an incoming call or when i call some one its microphone is so weak and people cant hear me!
I just paired the headset to another phone but it worked properly...
any solution?
I have the same problem. But in my case people can hear me when T909S is connected to the phone (Samsung), not very good, but they can.
What I'm concerned is when I connect this headset to my computer and try to use it for Skype, whatever settings I use the sound from Microphone is always very squeaking and it's impossible to use this headset as my headphones in Skype...
Any solutions?
I am trying to avoid re-pairing my bluetooth headsets when I switch them.
My original bluetooth setup includes a hands-free hook-up to my Prius, and a stereo BT headset (with mic). I have recently been trying different earpiece headsets for traveling.
I had no problem alternating with my stereo headset and my car, but when I try an earpiece it asks for a pairing code. When I pair with it it works fine, but when I switch back to the stereo headset I have to re-pair it.
It sounds like there is some limitation on how many BT devices the Captivate can remember?
FWIW I am running JH7 rooted.
Any thoughts on this?
Anybody here has tried to use the "Hi-Fi Wireless Headset with FM Radio MW600" with the Ameo?
My Ameo has the (German) HTC WM6.0 stock ROM but I want wo try a WM6.1 ROM. I want to make calls with the MW600 bluetooth headset, voice dialing and audio steaming. And caller-id on WM600 display would be very nice.
bluetooth disabled after pairing
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Purzelkater said:
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Click to expand...
Click to collapse
I able to pair this mw600 with my laptop and 2 phones(HTC Touch Pro2 and Sony Ericsson F305).
1) I can answer a call from SE F305 while on movie from laptop/FM/musci from HTC without any prob. The quality of this device SUPERB!!
2)The only prob is with HTC,I can't pair HTC with MW600 while on movie from laptop/FM/music from SE F305. I tried change many option and tweak but hopeless. Anyone have a solution for my problem?Or MW600 compatible multipoint with SE phones only?
TQVM
Hi!
I bought a Samsung HM3100 bluetooth headset, my problem is that i cant play any music on the headset. The pairing is going fine, but when i try to play the sound on bluetooth, the phone doesnt find the headset device on bluetooth(the headset is connected and paired on bluetooth setting)
I can redial the caller and etc, but dunno how to play music on it.