Hi friends my android is a phone hard brick i tried but i tried the primary flash
Nop error code: 10
The device is not in firehose mode
DEVICE MODEL GENERAL MOBILE 4G
Please find a solution: ((((
: Ağlayan:: Ağlayan:: Ağlayan:: Ağlayan:: Ağlayan:: Ağlayan:: Ağlayan:
Related
Hello,
While flashing the SP-JAS computer freezed on 15% of completion and now the device is stuck in BOOTLOADER MODE, I'm not able to flash it normally, I even tried the SD Method, and it hangs on Checking...
Here's the RUU log file.
20:06:19:875 [msg] : Version : [5.10 - 20060412].
20:06:22:937 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
20:06:27:156 [msg] : Disconnect ActiveSync .... [2]
20:06:27:156 [msg] : Start Get Connect Port.
20:06:27:343 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
20:08:47:984 [err] : BL Get Device Data Error.
20:08:47:984 [msg] : START UnInitialization !
20:08:48:500 [msg] : END UnInitialization !
Here are also some results from the MTTY
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: B, Bootloader Version : 2.05
Built at: Jul 12 2006 15:32:49
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x8
Main Board version=0x4
USB>checkimage
IPL CRC checksum = 0x9352B5E9
SPL CRC checksum = 0x42F889A1
CE CRC checksum = 0x3197DD93
ExtROM is None.
Radio Image CRC checksum = <-- There's no result here and it freezes.
Help appreciated...
Not sure if it will help but have you tried using the latest HTC ROM update ? I had a similar problem on my Dopod and eventually got it back with latest HTC ROM update.
Well actually the latest HTC ROM was installed I wanted to revert back to the Imate rom, while the flashing procedure the computer freezed on 15%...
I'm not able to flash the device anymore, it's stuck in the bootloader....
Breeze has frozen after ROM flash
Please help me!
I have done upgrade MTeoR with rom RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR.
After the upgrade my qtec went shutdown and after this froze and have clear white screen.
I did try left+right soft key+power and selected restore to default factory, but the situation is same, phone don't working
I did try jog wheel+camera+power and ran upgrade, USB on PC detect phone as HTC device, but the ActiveSync don't find device and RUU program don't work and waiting to connect.
The Same problem!
I have the same problem! My PC freezed on 3% and now the device stuck in BOOTLOADER MODE! I tried to update after this, update fails! INVALID VENDOR ID I want to try SD METHOD, but i don't know where to find ROM in .nbf format Please Help...
i also have the same problem.. stuck in bootloader... even though i try installing the original rom it says invalid vender id.....
does nobody know what to do?
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
MrPhoni said:
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
Click to expand...
Click to collapse
didnt work for me....
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
eViL D: said:
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
Click to expand...
Click to collapse
didnt work for me..
Hello,
i tried to root my Maze Alpha 6G and accidentally flashed the wrong Recovery from here https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575 using the fastboot method. So my phone was stuck in a orange state bootloop. I tried to flash the correct recovery then using SPFTool but after connecting the phone to the PC I got an error: "BROOM ERROR : STATUS_PRELOADER_INVALID". After that the phone is dead. I cant turn it on, nor can I connect it to PC or anything. PC only says error getting device info. SPFTools also isnt able to connect to it anymore....is there any way to unbrick it? Obviously I was so smart to not create a backup of my device....
//EDIT: OK I managed to reflash the correct stock preloader and recovery and I was able to boot into my device again! Sadly all my user data is whiped...Is there any way of getting my user data back?
C0dR said:
Hello,
i tried to root my Maze Alpha 6G and accidentally flashed the wrong Recovery from here https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575 using the fastboot method. So my phone was stuck in a orange state bootloop. I tried to flash the correct recovery then using SPFTool but after connecting the phone to the PC I got an error: "BROOM ERROR : STATUS_PRELOADER_INVALID". After that the phone is dead. I cant turn it on, nor can I connect it to PC or anything. PC only says error getting device info. SPFTools also isnt able to connect to it anymore....is there any way to unbrick it? Obviously I was so smart to not create a backup of my device....
//EDIT: OK I managed to reflash the correct stock preloader and recovery and I was able to boot into my device again! Sadly all my user data is whiped...Is there any way of getting my user data back?
Click to expand...
Click to collapse
would you please add some details, as to what steps you had to take to recover.
you know the only way this "developer" community works is if the people here using it share their knowledge. And you learned something in this experience that could very well help someone down the road.
C0dR said:
Hello,
i tried to root my Maze Alpha 6G and accidentally flashed the wrong Recovery from here https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575 using the fastboot method. So my phone was stuck in a orange state bootloop. I tried to flash the correct recovery then using SPFTool but after connecting the phone to the PC I got an error: "BROOM ERROR : STATUS_PRELOADER_INVALID". After that the phone is dead. I cant turn it on, nor can I connect it to PC or anything. PC only says error getting device info. SPFTools also isnt able to connect to it anymore....is there any way to unbrick it? Obviously I was so smart to not create a backup of my device....
//EDIT: OK I managed to reflash the correct stock preloader and recovery and I was able to boot into my device again! Sadly all my user data is whiped...Is there any way of getting my user data back?
Click to expand...
Click to collapse
Where have you found the correct preloader for Maze Alpha X ? Thanks, CVLo
Have you tried this?
https://forum.xda-developers.com/maze-alpha/development/unbrick-maze-alpha-x-6-64gb-t3817716
Maze Alpha 4GB. Not booting. Black screen after rooting.
Hello everyone,
I have done the same thing as the first post, and my phone is at the black screen, not booting. My Maze is the 4GB version, not the 6GB. Can someone help me unbrick it?
When I put it into usb, I got two usb devices cycling:
Bus 002 Device 047: ID 0e8d:2000 MediaTek Inc. MT65xx Preloader
Click to expand...
Click to collapse
and
Bus 002 Device 048: ID 0e8d:0003 MediaTek Inc. MT6227 phone
Click to expand...
Click to collapse
When I try to Format the device, i got:
BROM Exception! ( ERROR : STATUS_SEC_WRITE_DATA_NOT_ALLOWED (-1073610740) , MSP ERROE CODE : 0x00.
[HINT]:
)((exec,../../../flashtool/Cmd/FormatCommand.cpp,78))
Click to expand...
Click to collapse
When I try to download a partition, for example preloader, I got:
executing DADownloadAll...
Stage:
[0] WRITE TO PARTITION [ preloader ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_DL_FORBIDDEN (-1073610748) , MSP ERROE CODE : 0x00.
Click to expand...
Click to collapse
or for recovery:
executing DADownloadAll...
Stage:
[3] WRITE TO PARTITION [ recovery ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_DL_FORBIDDEN (-1073610748) , MSP ERROE CODE : 0x00.
Click to expand...
Click to collapse
This goes for any partitions the other partitions as well.
I have tried these ROMs:
MAZE_Alpha_4G_V09_SPFT
MAZE_Alpha_V03_20170808
MAZE_Alpha_V04_B_20171018
MAZE_Alpha_V05_20170816
Click to expand...
Click to collapse
The Smart Phone Flash Tool is showing my Chip Info correctly. Maybe i am missing something. A permission maybe? Or the correct ROM. I have no backup too. I didn`t think that the situation will get so ugly.
Any help will be much appreciated.
Thank you in advance.
Can anyone help me with the firehose and XML files for a Samsung A71 ?
I have hard bricked it and i can only acces it through EDL.
Thank you.
SanduBalon said:
Can anyone help me with the firehose and XML files for a Samsung A71 ?
I have hard bricked it and i can only acces it through EDL.
Thank you.
Click to expand...
Click to collapse
Here is what I found:
Once your Qualcomm Android device has entered EDL mode, you can connect it to the PC and use tools like QPST or QFIL to flash firmware files to unbrick or restore stock ROM.
QPST:
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
And:
Unbricking and QPST - All Snapdragon / Qualcomm devices
Hello All, First let me say thanks to all XDA Developers, and without this forum I would still be a pleb when it comes to unbricking. :highfive: The link to QPST...
forum.xda-developers.com
QFIL:
How To Flash Qualcomm Mobile Device Using QFIL Flashing Tool – StockRomFlash
www.stockromflash.com
But I do not have the files you asked for. Sorry.
Please could somebody get us the firehose // .mbn file
SanduBalon said:
Can anyone help me with the firehose and XML files for a Samsung A71 ?
I have hard bricked it and i can only acces it through EDL.
Thank you.
Click to expand...
Click to collapse
i have a same probleme ,have you find a solution plz
has anyone here found any solution?
HERE
Hi everyone,I tried to unlock bootloader and root my Realme 8,I was flashing "preloader" via MTKClient and everything got freezed. My phone got "bricked" so I can't turn it on or do any actions but I tried to connect him with my laptop again and I ssuccessfully entered MTKClient again with successfully connection but I don't know how do I fix the phone.
Okay I think I flashed wrong preloader but I can't find preloader for Realme 8 can someone copy it and paste it plees
RMX3085 - there :
[GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]
Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO...
forum.xda-developers.com
Hi!
I have hard bricked Redmi 9 (cattail) device and now I want to unbrick it. According to a video, I need to flash boot.img of stock fastboot rom to get fastboot working and then flashing the stock rom. But, when I try to flash it, I get the following error:
Handshake error, retrying...
It comes about 7 - 8 times and the program exists. What could be the possible reason?
Btw if someone has a link that shows how to brick this device in a detailed way, I would be more than happy