Database Develop

Redmi note 9 - EDL flash - Need authorized Mi account

Hello,
i have problem with flashing redmi note 9 pro in edl mode.
I need authorized Mi account. Can somebody help me with it? Via teamviewer? Reward certain!
Thank you very much, Lukas

Edl mode is basically service center repair from xiaomi.You need ifu dongle or contact repair center.or black market not recommended do.

This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

explicate mejor

[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com

VD171 said:
This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Click to expand...
Click to collapse
Do I need to flash it via fastboot ?
I have already done it but my device is detected in com ports for only 2 seconds and then charging screen appears. I have also installed device filter(libusb).
And after flashing preloader by device doesn't stay in edl mode even I connect my phone while pressing and holding vol down .

(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
friend here you have the guide to remove the HARD BRICK from your mobile.
I hope it will be of your help.

Question Need help, seems like I have bricked my X7 Max

Hello All,
I need some help.
I was running on A17 official update (India). I have unlocked the bootloader using this method.
Realme X7 Max / GT Neo (CN) || Updates || Official™
Unofficial Bootloader unlock method is finally available https://forum.xda-developers.com/t/guide-bootloader-unlock-on-rui-2-0-based-on-android-11-r.4286451/ Yes we could unlock before but now we are making method available to all since now it seems that bootloader unlock can be useful. :P
t.me
followed this guide
[GUIDE] Bootloader Unlock On RUI 2.0 based on Android 11(R)
(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that...
forum.xda-developers.com
Post to this I installed the TWRP from this link
TWRP Recovery Unofficial for Realme X7 Max {RMX3031} Update [ 30-09-2021 ]
TEAM WIN RECOVERY PROJECT TeamWin Recovery Project, more widely known by its TWRP abbreviation, is the most popular custom recovery solution for Android devices. For the unaware, TWRP replaces the default recovery environment that came with your...
forum.xda-developers.com
Everything was working fine until by mistake I flashed Magisk and got bootloop and then to recover from bootloop tried factory reset and was getting bootloops again. then I wiped the whole device using TWRP.
Post to which my TWRP mode is not showing internal storage. neither its booting up. only getting bootloops after getting the OEM unlocked after a 5-second screen message .
Here's what I have tried till now.
1. Tried flashing Trebble images using Fastboot.
Informational - GSI Rom - Treble Support - Android 11
Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/ Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me. Warning :- There are no kernel...
forum.xda-developers.com
tried two images
lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz
caos-v312-210815-arm64-bgZ.img.xz
No luck still getting boot loops.
2. tried these steps
Informational - GSI Rom - Treble Support - Android 11
Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/ Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me. Warning :- There are no kernel...
forum.xda-developers.com
everything is happening well till step 14, but the USB VCOM driver keeps disappearing and the phone reboots itself, I tried adding USB filters too but no luck.
I have already disabled the driver signature and have all drivers installed. Even MTKAuthBypassTool_V6 showing the device is ready for SP tool flash . but still, it's failing over and over, the phone keep rebooting to recovery. the device manager shows MTK USB port V1633 getting disconnected in every 2 seconds. and then once it reboots no sign of MTK USB in ports.
What is working
1. Fastboot - working flawlessly. no issues entering fastboot.
2. Recovery- Both Stock and TWRP working fine, I can even browse withTWRP . but when connected to PC not showing internal storage size or allow to copy anything, wipe done a couple of time.
Please advise how can I fix this issue?

Hi
DM me. i think i can help you.

Open your eyes))
X7 MAX and GT NEO FLASH/UBRICK INSTRUCTIONS
X7 MAX and GT NEO FLASH/UBRICK CONVERT GT NEO/GT NEO FE to X7 MAX (and vice versa) BACKUP Please read all the information before proceeding. 1) In Developer options need turn "ON", "OEM unlock" and USB Debug. 2) Unlock your bootloader...
forum.xda-developers.com

vikas776 said:
Hi
DM me. i think i can help you.
Click to expand...
Click to collapse
hey was it solved?

kamikaze_in said:
hey was it solved?
Click to expand...
Click to collapse
Yes

sousaptak said:
Yes
Click to expand...
Click to collapse
bro iam stuck in same problem please help

I tried the SP flash tool and accidentally formatted everything . The phone became a brick and the quick boot mode didn't work. Only black screen, How to make the phone work again?

abidrockzx said:
I tried the SP flash tool and accidentally formatted everything . The phone became a brick and the quick boot mode didn't work. Only black screen, How to make the phone work again?
Click to expand...
Click to collapse
well did anything worked im stuck with the same issue.

ZUESHACKED said:
well did anything worked im stuck with the same issue.
Click to expand...
Click to collapse
Same problem did you Fixed? please Help me

Tikaram22 said:
Same problem did you Fixed? please Help me
Click to expand...
Click to collapse
well i just did actually they replaced my motherboard for free i just told them it is software issue

ZUESHACKED said:
well i just did actually they replaced my motherboard for free i just told them it is software issue
Click to expand...
Click to collapse
reach service centre tell them their was an upgrade which bricked it they will try to reflash and on falied attempt as youve deleted loader files so they will ask for replacement of the board

sousaptak said:
Hello All,
I need some help.
I was running on A17 official update (India). I have unlocked the bootloader using this method.
Realme X7 Max / GT Neo (CN) || Updates || Official™
Unofficial Bootloader unlock method is finally available https://forum.xda-developers.com/t/guide-bootloader-unlock-on-rui-2-0-based-on-android-11-r.4286451/ Yes we could unlock before but now we are making method available to all since now it seems that bootloader unlock can be useful. :P
t.me
followed this guide
[GUIDE] Bootloader Unlock On RUI 2.0 based on Android 11(R)
(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that...
forum.xda-developers.com
Post to this I installed the TWRP from this link
TWRP Recovery Unofficial for Realme X7 Max {RMX3031} Update [ 30-09-2021 ]
TEAM WIN RECOVERY PROJECT TeamWin Recovery Project, more widely known by its TWRP abbreviation, is the most popular custom recovery solution for Android devices. For the unaware, TWRP replaces the default recovery environment that came with your...
forum.xda-developers.com
Everything was working fine until by mistake I flashed Magisk and got bootloop and then to recover from bootloop tried factory reset and was getting bootloops again. then I wiped the whole device using TWRP.
Post to which my TWRP mode is not showing internal storage. neither its booting up. only getting bootloops after getting the OEM unlocked after a 5-second screen message .
Here's what I have tried till now.
1. Tried flashing Trebble images using Fastboot.
Informational - GSI Rom - Treble Support - Android 11
Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/ Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me. Warning :- There are no kernel...
forum.xda-developers.com
tried two images
lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz
caos-v312-210815-arm64-bgZ.img.xz
No luck still getting boot loops.
2. tried these steps
Informational - GSI Rom - Treble Support - Android 11
Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/ Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me. Warning :- There are no kernel...
forum.xda-developers.com
everything is happening well till step 14, but the USB VCOM driver keeps disappearing and the phone reboots itself, I tried adding USB filters too but no luck.
I have already disabled the driver signature and have all drivers installed. Even MTKAuthBypassTool_V6 showing the device is ready for SP tool flash . but still, it's failing over and over, the phone keep rebooting to recovery. the device manager shows MTK USB port V1633 getting disconnected in every 2 seconds. and then once it reboots no sign of MTK USB in ports.
What is working
1. Fastboot - working flawlessly. no issues entering fastboot.
2. Recovery- Both Stock and TWRP working fine, I can even browse withTWRP . but when connected to PC not showing internal storage size or allow to copy anything, wipe done a couple of time.
Please advise how can I fix this issue?
Click to expand...
Click to collapse
Try ADB sideload if your TWRP is there. Can you get into that TWRP?

abidrockzx said:
I tried the SP flash tool and accidentally formatted everything . The phone became a brick and the quick boot mode didn't work. Only black screen, How to make the phone work again?
Click to expand...
Click to collapse
What did you mean by fomatted everything. Whole partitions or just images?

Me too

w2sboyz said:
Me too
Click to expand...
Click to collapse
Update- X7 max is alive after 2 days.

Question Bricked Poco M3 Pro

Hi good day!
So here is the scenario:
After unlocking bootloader, i tried to flash stock rom on the device. Flash was successul (via miflashtool), however, it bootloops either into miui recovery or miui logo.
So what I did next was to flash eea rom on it. However, flashing took only 4 secs. The screen stayed at fastboot boot. So what I did was manually reboot the phone. However, the phone just died. Black screen, no vibration, no charging etc. Is there any way I could recover it? Any guide out there?

hello ... dont worry i did that so many time..
just search and download mtk daa sla bypass tool (its for bypassing mtk daa sla auth so you can flash in brom and preloader mode.. without autorized account ) and spflashtool-5.2xxx.. to do the rom flash ...
run mtk bypass and hold all hw keys (vol+ vol- and power for poco m3 pro and redmi note 10 5g) and connect the phone wait till mtk bypass do its work .. after that (( dont disconnect the phone )) start spflashtool in option select uart mode load scatter file that is in fastboot rom folder and press download...

Use this link... its all you need to unbrick your phone https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/

You can try this link
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com

Thanks a bunch for your replies. I will take a look at each of it

Zaiserr2 said:
You can try this link
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Click to expand...
Click to collapse
Hi good day! Might as well take this chance to ask how to use sp flashtool to flash stock rom of the unit
I'm quite new to the usage of this flashing tool. Thanks

Question Realme 8 Bricked

I followed the instructions on this thread Flashing TWRP and Rooting Realme 8, and it bricked my phone. I must have done something wrong but I dont know what. After the step where I had to hold Volume Down and Power and release 5 times, I got the message the recovery/bootloader has been damaged.
I managed with to get the recovery working again with stock recovery, but it wont boot. It wont detect my SD card nor does it detect any WiFi for online Update.
I tried SP Flash, but now it gives me the error that verified boot is enabled, even though im using MTKSecureBoot.
Can someone help?

Try to flash back stock boot and vbmeta images using MTK client or SP flash.

and where that an be got ?
fullflash 7.5gb zip for A.22 have no such files ...

So ... Found ... in near topic
[GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]
Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO...
forum.xda-developers.com

Redmi 8 Olive hard bricked

Hi,
My redmi 8 olive hard bricked, only reading testpoint mode, could not flash firmware through miflash tool which stating "You are not authorized for this operation".
Requesting help to restore the firmware.

Ziarana said:
Hi,
My redmi 8 olive hard bricked, only reading testpoint mode, could not flash firmware through miflash tool which stating "You are not authorized for this operation".
Requesting help to restore the firmware.
Click to expand...
Click to collapse
Redmi 8 bootloop problem.
My redmi 8 got stuck in bootloop, without me doing anything , it doesn't have debugging enable plus the bootloader is locked to and it doesn't have mi account login to it , I am not able to flash it nor to unlock the bootloader, can anyone please...
forum.xda-developers.com