Related
Hi there,
I've been using my Vivid since it came out and been surfing rom to rom but haven't tried to get s-off.
I tried it today but unfortunately, there was an accident. While controlbear was running ( I haven't done the wire trick), my pc crashed and had to reboot. After that, my phone got stuck on JoupunutBear screen and I can't get it boot up again.
I tried to push recovery but cmd windows keep saying writing recovery and did not finish. I tried to oem lock, it said successfully locked but the second line said Failed (too many links). I put the stock rom as PH39IGM.zip on the sd card, the bootloader checked it twice but did not ask me to apply it.
That's every ways I know to save my phone's life but it did not help at all.
I think something can still be done while the bootloader is still accessible, right?
Please help me out! It's the first phone I bought my self!
Any help or idea would be appreciated!
Thank you all!
Relock the bootloader and run stock ruu file may just do the trick
Bigtjmc said:
Relock the bootloader and run stock ruu file may just do the trick
Click to expand...
Click to collapse
I did that first but it did not help. It cant boot in to android so cant run ruu
I followed trouble shooting guide on the site and tried dozens of times till accidentally got in to recovery, flashed a rom but it still stucking there
so exhausted of trying...
So you can't get into hboot ?
Bigtjmc said:
So you can't get into hboot ?
Click to expand...
Click to collapse
I can get in bootloader and recovery
I flashed a rom but it just wont boot up
and I cant push boot.img through fastboot usb
but somehow I got S-Off already
Ok just relock the boot loader via htcdev.com and in this tread download the ruu from here then open the program follow the prompts , once you boot in hboot select fastboot then plug in the USB cord the phone should then say fastboot USB then all you got to do is run the ruu program on ur pc
---------- Post added at 05:29 PM ---------- Previous post was at 05:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=1803750&page=2
Post 14 just click the link and it should down load
Bigtjmc said:
Ok just relock the boot loader via htcdev.com and in this tread download the ruu from here then open the program follow the prompts , once you boot in hboot select fastboot then plug in the USB cord the phone should then say fastboot USB then all you got to do is run the ruu program on ur pc
---------- Post added at 05:29 PM ---------- Previous post was at 05:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=1803750&page=2
Post 14 just click the link and it should down load
Click to expand...
Click to collapse
thanks for your helps!
I saved my phone's life in another way. It booted up right after I finished reading your post!
Lucky me!
some times i cant get in hboot unless i pull the battery then hold the -vol button then power button.
might help also
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
good job .
Hello, this is not the first time I'm rooting an Android phone, and I had no problems with any of my past attempts. However, this situation with Huawei P9 EVA-L09 has given me a headache...
I have originally followed this guide:
https://theunlockr.com/2016/12/06/root-huawei-p9-p9-plus/
(which appears to have skipped tiny but crucial part on flashing twrp - so I don't recommend)
Everything was going fine until I have flashed TWRP on my still NOT-rooted Huawei P9 EVA-L09 (adb reboot bootloader ; fastboot flash twrp-3.1.0-0-eva.img) successfully:
target reported max download size of 471859200 bytes
sending 'recovery' (22462 KB)...
OKAY [ 0.639s]
writing 'recovery'...
OKAY [ 0.302s]
finished. total time: 0.944s
After this I have used the command fastboot reboot and phone started normally. However when I try booting into custom TWRP recovery I just flashed and get the usual bootloader unlocked warning! I either get stuck at Phone is booting now... or I get into original EMUI Huawei eRecovery.
Did I do something wrong? What do I do after flashing TWRP?
I have read somewhere that original EMUI ROM maybe rewrites custom recovery if OS(ROM) boots before you entered recovery so could this be my problem? How do I reboot directly into TWRP from fastboot to avoid booting into the ROM?
Also, what is the correct way to boot into TWRP, what key combo? Since I get phone bootloader unlocked warning! right after powering on the phone, do I press the combination right away or after the warning shows up? I've been trying to boot custom recovery for hours, this is just silly...
Put simply I can't seem to get into TWRP I just flashed so I can install SuperSU from SD card to root my phone...
I have tried older TWRP version too, didn't help.
Phone is Huawei P9 EVA-L09, Android 7.0 EMUI 5.0, tried both TWRP versions from here: https://dl.twrp.me/eva/
After flashing twrp you should special reboot to twrp. Adb command reboot with pushing vol + and at the same time disconect usb cable. Check this on twrp official
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
darrr1 said:
After flashing twrp you should special reboot to twrp. Adb command reboot with pushing vol + and at the same time disconect usb cable. Check this on twrp official
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
How will I do anything with adb if I'm in fastboot mode? Only fastboot commands work...
Maybe you thought fastboot reboot and key combos, but which combos are correct? The TWRP official page says I should Google for key combo (how come they don't know lol, I guess they had to test the bloody thing?) and I have googled but some people say it's power down, some up, some both, what the f? When I think I got it right I get stuck on Device is booting now...
I've just tried this:
Flash TWRP 3.1.0-0-eva again over ADB
fastboot reboot + VolUp held and USB cabble plugged out
Stuck forever at Device is booting now... (below the Unlocked bootloader warning).
Ofcourse fastboot.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Solved this part by using this TWRP version:
https://forum.xda-developers.com/p9/development/twrp-t3565703
The button combination to enter TWRP on P9 EVA-L09 EMUI 5.0 is - Power and Vol+ buttons held while fastboot reboot command is issued in CMD and USB cable unplugged, all at the same time. After device vibrates you should release only the power button. When you see 'Device is booting...' you can release Vol+ too. TWRP should now boot.
Now on to root...
Solution:
https://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947/post70927601#post70927601
After flashing EMUI 5.0 EVA-L09C432B378 and update B378_update_data_full_hw_eu and wiping my phone (wipe data/factory reset - yes this was probably stupid without backup or anything), it boots fine but there is no keyboard app, only useless voice control. This wouldn't be a problem if I could get past EMUI welcome screen and install keyboard.apk manually but it won't allow me to use the phone until I log into Google account which I used on the phone before factory reset. It doesn't allow me to access SD card or anything either, doesn't even ask for permission when plugged in. Flash process also rewrote TWRP recovery so I only have eRecovery atm (bootloader is still unlocked but this is useless at this point). I also cannot enable Dev options/USB debugging or reach phone settings (all reset to default obviously) at all because I can't get past EMUI welcome wizard without a keyboard... I can use dialer keypad in emergency call mode before starting the welcome wizard, for example I just checked my IMEI, but most other commands don't work.
Any ideas? I read that there is a rollback version which will enable me to flash the previous EMUI/Android6.0 version, but which rollback is right for my device European EVA-L09C432B378 phone? I don't want to get into more trouble by flashing a wrong file...
Vernicht said:
Solved this part by using this TWRP version:
https://forum.xda-developers.com/p9/development/twrp-t3565703
The button combination to enter TWRP on P9 EVA-L09 EMUI 5.0 is - Power and Vol+ buttons held while fastboot reboot command is issued in CMD and USB cable unplugged, all at the same time. After device vibrates you should release only the power button. When you see 'Device is booting...' you can release Vol+ too. TWRP should now boot.
Now on to root...
Solution:
https://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947/post70927601#post70927601
Click to expand...
Click to collapse
twrp3.1.1-1 with openKirin boots into Recovery fine
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Thank you gonsol !!!
Huawei P9 Lite Stuck Up on Huawei LOGO
Someone can help or can give me a step by step turorial on how to fix Huawei P9 Lite Stuck up on Huawei LOGO.
Everytime I try to power off my phone it always reboot twice and I try a method "dload'/"UPDATE.APP" but it won't work for me anymore co'z my phone wont turn off even I try to empty it's battery and try to charge it but its always the same ..
Any help will appreciated Thank You and Godbless newbie here
gonsol said:
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Click to expand...
Click to collapse
Hello, my phone is stuck now on the "Your device is booting now" state, can you help? I did exactly what you said above
sorry I tried to write it as detailed as possible when it happened.. only thing i recall is that I read that sometimes you have to try several times,
Maybe you thought fastboot reboot and key combos, but which combos are correct? The TWRP official page says I should Google for key combo (how come they don't know lol, I guess they had to test the bloody thing?) and I have googled but some people say it's power down, some up, some both, what the f? When I think I got it right I get stuck on Device is booting now...
I've just tried this:
Flash TWRP 3.1.0-0-eva again over ADB
fastboot reboot + VolUp held and USB cabble plugged out
Stuck forever at Device is booting now... (below the Unlocked bootloader warning).[/QUOTE]
I have the same matter here with my Huawei Nova 2i. I have flashed sucessfully TWRP but cannot enter TWRP mode to install root. When I hold Power + Vol+, it stucks on "Device is booting now..." forever. And for normal power up, it show the EMUI recovery. I've tried so many way but useless. [TWRP][P9][3.1.1-1][EMUI 5.x/AOSP N][DECRYPTION SUPPORT] by OldDroid did't help. Is there any version of TWRP can help my Huawei Nova 2i???
gonsol said:
I got stuck at the same problem but some how luckily I could access TWRP
My phone is on Emu 5.0.1
Flash TWRP as indicated on manuals
without rebootin lock again your bootloader with fastboot oem relock XXXXXXXXXXX (the pin you used to unlock)
reboot your phone, Huawei erecovery might say something about format data partition, ignore, just shutdown your phone
reboot on bootloader using volumedown + power
Unlock your phone again with fastboot oemunlock XXXXXXXXXXX
shutdown your phone
Reboot in recovery using volume up + power.. TWIRP Appears!!
during all process phone was connected to computer. Hope it helps someone
Click to expand...
Click to collapse
Hello
Thank you all for the help
I think I did something really bad... I have rooted phone and TWRP installed on a P9, but no ROM. I was trying to enter TWRP recovery and I did "fastboot oem relock XXXXXXXXXXX".
Now I see only the white screen with little andoid robot saying:
Attention!
Please update system again
...
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Am I screwed ? :0
Thank you so much in advance
lexoyo said:
Hello
Thank you all for the help
I think I did something really bad... I have rooted phone and TWRP installed on a P9, but no ROM. I was trying to enter TWRP recovery and I did "fastboot oem relock XXXXXXXXXXX".
Now I see only the white screen with little andoid robot saying:
Attention!
Please update system again
...
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Am I screwed ? :0
Thank you so much in advance
Click to expand...
Click to collapse
Don't understand why you thought that relocking bootloader would help you to enter TWRP, but it's too late for discussions about.
Relocking bootloader trigers hard reset, but hard reset fails if you don't have stock partititions (eg, TWRP means you don't have stock recovery, root means you don't have stock boot partition).
You didn't have and you don't have OS (hence you will not be able to Unlock OEM, and if TWRP was deleted, you can't flash it - TWRP is usually needed to recover)
You should first find out what you really have now :
Press power for long (if needed, even for half a minute), to make sure phone switches off. Make sure USB is disconnected. Boot by Vol+, Vol- and Pow: does it boot to TWRP, eRecovery or to nowhere?
Turn off again, connect by USB to PC (same USB cable, same PC you previously flashed TWRP from or locked/relocked your bootloader from). Power on by Vol- and Pow, does it boot to Fastboot and does Fastboot say that FRP and Bootloader are locked or unlocked.
If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2) in which case you can flash TWRP -you are good, you can try some methods to install stock ROM through TWRP, like HWOTA method:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
If you have eRecovery, you can pull out SD card and pepare it for DLOAD instalation of ROM.
Bad if you don't have any recovery and FRP and/or Bootloader is locked. Maybe DC Phoenix can help you then
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
zgfg said:
Don't understand why you thought that relocking bootloader would help you to enter TWRP, but it's too late for discussions about.
Relocking bootloader trigers hard reset, but hard reset fails if you don't have stock partititions (eg, TWRP means you don't have stock recovery, root means you don't have stock boot partition).
You didn't have and you don't have OS (hence you will not be able to Unlock OEM, and if TWRP was deleted, you can't flash it - TWRP is usually needed to recover)
You should first find out what you really have now :
Press power for long (if needed, even for half a minute), to make sure phone switches off. Make sure USB is disconnected. Boot by Vol+, Vol- and Pow: does it boot to TWRP, eRecovery or to nowhere?
Turn off again, connect by USB to PC (same USB cable, same PC you previously flashed TWRP from or locked/relocked your bootloader from). Power on by Vol- and Pow, does it boot to Fastboot and does Fastboot say that FRP and Bootloader are locked or unlocked.
If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2) in which case you can flash TWRP -you are good, you can try some methods to install stock ROM through TWRP, like HWOTA method:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
If you have eRecovery, you can pull out SD card and pepare it for DLOAD instalation of ROM.
Bad if you don't have any recovery and FRP and/or Bootloader is locked. Maybe DC Phoenix can help you then
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
Thank you so much for your answer @zgfg
Thanks to you I understood that the phone was never really turning off no matter how long I press (I tried for 1 min approx), so I left it to discharge and when I plugged in I pressed the 3 buttons and it "boots" to EMUI eRecovery. Then I tried the download and restore but it failed of course. I reboot with USB and Vol- and Pow, and it loads the white screen with
FASTBOOT&RESCUE MODE
Please Connect Usb Cabke ti
Your Computer and Open Hisuite
...
Android reboot reason:
coldboot
NA
volumnkey_down_press_process_func
...
PHONE Relocked
FRP Unlock
So I understand that I am in this case right?
"If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2)"
If this is the case I will try this method tomorrow. Thank you so much again!
---------- Post added at 02:52 AM ---------- Previous post was at 02:29 AM ----------
I unlocked the oem with "sudo fastboot oem unlock XXXX" it seems to do nothing
lexoyo said:
Thank you so much for your answer @zgfg
Thanks to you I understood that the phone was never really turning off no matter how long I press (I tried for 1 min approx), so I left it to discharge and when I plugged in I pressed the 3 buttons and it "boots" to EMUI eRecovery. Then I tried the download and restore but it failed of course. I reboot with USB and Vol- and Pow, and it loads the white screen with
FASTBOOT&RESCUE MODE
Please Connect Usb Cabke ti
Your Computer and Open Hisuite
...
Android reboot reason:
coldboot
NA
volumnkey_down_press_process_func
...
PHONE Relocked
FRP Unlock
So I understand that I am in this case right?
"If you still have TWRP (first test) or if Bootloadr and FRP are unlocked (test 2)"
If this is the case I will try this method tomorrow. Thank you so much again!
---------- Post added at 02:52 AM ---------- Previous post was at 02:29 AM ----------
I unlocked the oem with "sudo fastboot oem unlock XXXX" it seems to do nothing
Click to expand...
Click to collapse
With FRP Unlocked you can try to unlock Bootloader - it will fail to hard reset, but if it unlocks, you will be able to flash TWRP.
With TWRP you can try - download and use stock ROM for your model:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
zgfg said:
With FRP Unlocked you can try to unlock Bootloader - it will fail to hard reset, but if it unlocks, you will be able to flash TWRP.
With TWRP you can try - download and use stock ROM for your model:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
Click to expand...
Click to collapse
It did unlock FRP I think, it's now
PHONE Unlocked
FRP Unlock
I did a "fastboot flash recovery twrp-3.1.1-1-eva.img" but I still can't access TWRP
Sorry if it is a noob question, I'm learning and I looked for an answer all day long :facepalm:
lexoyo said:
It did unlock FRP I think, it's now
PHONE Unlocked
FRP Unlock
I did a "fastboot flash recovery twrp-3.1.1-1-eva.img" but I still can't access TWRP
Sorry if it is a noob question, I'm learning and I looked for an answer all day long :facepalm:
Click to expand...
Click to collapse
Are you on P9 Nougat?
Better use TWRP from here
https://forum.xda-developers.com/showpost.php?p=75787111&postcount=1
Nevertheless, what does it mean you cannot access TWRP - does Fastboot on the PC side report successful flashing?
If so, then
- keep USB connected to both phone and PC
- press and keep pressing Vol+, Vol- and Pow on the phone (it will not reboot yet)
-execute fastboot reboot
and immediately after disconnect USB
-keep presing three buttons as above, release Pow when it shows booting
You must be quick (with USB disconnectibg) and do exactly as above - with that phone should reboot to TWRP
If you don"t get it, phone will reboot to System and you will loose TWRP (you will have to flash TWRP agai)
Only when you first time upon flashing enter TWRP as above, TWRP will remain and later you will be able to enter TWRP as usual
Solution
For anyone pretty much, who has ****ed up his Huawei P9:
I got to the state where I could only enter Fastboot mode (Press vol- and connect power cable). When I tried to start the phone / go into recovery it would only display the "Your device has been unlocked and can't be trusted" Message. My mistake was to relock the bootloader in an attempt to get the recovery to work.
I looked for hours for the answer, here is what worked for me:
follow this tutorial (the "update firmware" part)
German
English
But with real precision, every step.
If you have a european unbranded L09 you should be fine using the firmware you can find on this site:
https://thedroidguru.com/download-install-huawei-p9-b394-nougat-update-europe/
if not you gotta find the full firmware (3 files!!) yourself - good luck!
If you only want to go back to stock you should be fine afterwards.
If you want to install twrp for root/custom rom/... follow these steps after installing twrp with the tool:
Upon flashing TWRP, FIRST THING YOU MUST DO is rebooting to TWRP. If you don't do that, stock Recovery will ovewrite TWRP.
Find instructions in the TWRP threads how to enforce immediate booting to TWRP, upon you flashed it:
-Type on the PC: fastboot reboot -but don't press Enter yet.
-Press and keep pressing Vol+ and Power buttons together on the phone
-Press Enter on the PC and then immediately unplug USB cabel.
-When phone shows Booting, release Power but keep pressing Vol+. button
Hope this helps, I don't take responsability for anything, happy flashing!
i used SRK TOOL
I open bootloader and install TWRP
But it doesnt work and also I cant rooting
I solve 1 day cause It doesnt boot with
"Your device has been unlocked and
can't be trusted.
To learn more,visit:
Your device is booting now...."
So I gived up and relock the bootloader
Actually, it takes bootloop also cant use fastboot
It doest work anything
I need your help
Go to Fastboot & check your BOOTLOADER & FRP is unlock or lock?
I can fix your problem if your BOOTLOADER & Frp is unlock
Rafa Mistry said:
Go to Fastboot & check your BOOTLOADER & FRP is unlock or lock?
I can fix your problem if your BOOTLOADER & Frp is unlock
Click to expand...
Click to collapse
It was unlocked but now I cant go to fastboot
I trying now but ....
Can you explain if I can reunlock bootload and go to fastboot?
Rafa Mistry said:
Go to Fastboot & check your BOOTLOADER & FRP is unlock or lock?
I can fix your problem if your BOOTLOADER & Frp is unlock
Click to expand...
Click to collapse
really really interesting, I can boot phone when discharge all battery and charge seconds
but it doesnt work to fastbootmode to use SRK tool
It have bootloop when rebooting
Is it soft brick?
Rafa Mistry said:
Go to Fastboot & check your BOOTLOADER & FRP is unlock or lock?
I can fix your problem if your BOOTLOADER & Frp is unlock
Click to expand...
Click to collapse
I can boot it normally but not fastboot
I think it need to install stock firmware
there maybe delete fastboot and recoverymod
I studying about unbrand but Im not sure
Is there any solution for me?
First turn of your phone than HOLD volume Down button & connect usb to pc
---------- Post added at 09:50 AM ---------- Previous post was at 09:31 AM ----------
kbs363 said:
It was unlocked but now I cant go to fastboot
I trying now but ....
Can you explain if I can reunlock bootload and go to fastboot?
Click to expand...
Click to collapse
You can go to Fastboot even your BOOTLOADER is lock
---------- Post added at 09:52 AM ---------- Previous post was at 09:50 AM ----------
Just install twrp than i will tell you how to solve your problem
Rafa Mistry said:
First turn of your phone than HOLD volume Down button & connect usb to pc
---------- Post added at 09:50 AM ---------- Previous post was at 09:31 AM ----------
You can go to Fastboot even your BOOTLOADER is lock
---------- Post added at 09:52 AM ---------- Previous post was at 09:50 AM ----------
Just install twrp than i will tell you how to solve your problem
Click to expand...
Click to collapse
I cant go to Bootloader even I do everything
and I was failed to intall TWRP first, so I brick my phone
I did many phone's customize with Galaxy or LG phone but I cant understant reason with P9...
kbs363 said:
I cant go to Bootloader even I do everything
and I was failed to intall TWRP first, so I brick my phone
I did many phone's customize with Galaxy or LG phone but I cant understant reason with P9...
Click to expand...
Click to collapse
First turn of your phone than HOlD Volume Down button & connect usb to your pc than your automatically go to fastboot
---------- Post added at 03:09 AM ---------- Previous post was at 03:07 AM ----------
After going to fastboot than install twrp .
ㅕ
Rafa Mistry said:
First turn of your phone than HOlD Volume Down button & connect usb to your pc than your automatically go to fastboot
---------- Post added at 03:09 AM ---------- Previous post was at 03:07 AM ----------
After going to fastboot than install twrp .
Click to expand...
Click to collapse
I said I cant do that....
I know how to do but...
It doesnt work
Its just bootloop when reboot also I try to enter the fastboot and recovery
Am I post with wrong sentance?
I cant understand why you saying that...
kbs363 said:
ㅕ
I said I cant do that....
I know how to do but...
It doesnt work
Its just bootloop when reboot also I try to enter the fastboot and recovery
Am I post with wrong sentance?
I cant understand why you saying that...
Click to expand...
Click to collapse
First install twrp
You can install this rom
kbs363 said:
i used SRK TOOL
I open bootloader and install TWRP
But it doesnt work and also I cant rooting
I solve 1 day cause It doesnt boot with
"Your device has been unlocked and
can't be trusted.
To learn more,visit:
Your device is booting now...."
So I gived up and relock the bootloader
Actually, it takes bootloop also cant use fastboot
It doest work anything
I need your help
Click to expand...
Click to collapse
You can install this rom mega. nz/#!KsQUWT6Z!tkjFyX1o_prhSZhCyzSfMPFaPHVjrrboNIKXco5deYA
1. Extra rom then copy to Dload folder in SDcard
2. Hold Up + Down volume button + Power button
3. Wait for minutes
^^
Hey all, so I got the dreaded Func 11 error mode on my device.
I had updated to Oreo, and was attempting to install a Lineage treble build. I think I flashed the wrong one and I tried to flash back to stock by using the oreo update method. Unfortunately what appears to have happened is that I've somehow destroyed my recovery side of things.
I can access Fastboot and tried to flash TWRP, but this fails to load (gets stuck on 'Your device is now booting').
I'm out of ideas as to what to try now. Does anyone have any suggestions? To make matters worse my battery is also now dead.
Any help is much appreciated and apologies if this is just a repeat of another thread.
I had the same error, I sent it to tech service, I have no idea how to fix that, my phone was stuck at "your device is booting now", no way to enter into recovery.
I hope you can fix your phone bro. :/
I did the same as you and got the same problem, I had to send my device away and get it repaired by an authorized repair agent. They ended up having to put in a new main board into my phone.
if you can access fastboot you need wait on error mode screenbattery die,when phone close taje charge your phone wait open otomaticly
---------- Post added at 04:53 AM ---------- Previous post was at 04:49 AM ----------
if you cant access fastboot mode,you need wait battery draind finish, when phone shut down plug the charger and wait phone automatically open,,then try reach fastboot mode,after that flash kernel_ramdik after that flash twrp again for oreo
volpula said:
if you can access fastboot you need wait on error mode screenbattery die,when phone close taje charge your phone wait open otomaticly
---------- Post added at 04:53 AM ---------- Previous post was at 04:49 AM ----------
if you cant access fastboot mode,you need wait battery draind finish, when phone shut down plug the charger and wait phone automatically open,,then try reach fastboot mode,after that flash kernel_ramdik after that flash twrp again for oreo
Click to expand...
Click to collapse
I can access no fastboot no problem. Only problem is battery is completely dead and every time I try to charge it just reboots to error mode when I plug it in. Can't access the recovery unfortunately and I know there isn't any fastboot command for it from what I can find.
if you can access fastboot mode,you need use extractor for your oreo files,extract kernel and ramdisk.img and flash,after that flash twrp recovery again
Well I'm off to work now where I have access to a windows PC. I'll see what I can do, otherwise I'll try DC Unlocker if need be. I don't believe I need to send it back for repair as that seems like a bit much for what's clearly not a hardware issue.
no you dont need send to repair,thats software issues.huawei is really terrible company.kirin chipset its slow then snapdragon or exynos cpu and cpu,camera just take good picture thats all not take good video like galaxy phones,software is very bad recovery system worst in the anroid phones i even use before.developer cant cook custom roms,i never buy huawei phone again and ibcant recoment anybody to buy.they dont deserve that prices
volpula said:
if you can access fastboot mode,you need use extractor for your oreo files,extract kernel and ramdisk.img and flash,after that flash twrp recovery again
Click to expand...
Click to collapse
All images flashed. I still can't get in to recovery however due to the battery being depleted.
It won't simply just charge and reboots to Error Mode. If anyone knows of a way around this that would be great. Are there fastboot instructions to get to recovery?
MrDanMak said:
All images flashed. I still can't get in to recovery however due to the battery being depleted.
It won't simply just charge and reboots to Error Mode. If anyone knows of a way around this that would be great. Are there fastboot instructions to get to recovery?
Click to expand...
Click to collapse
are you sure flash correctly files?you need oreo recovery.img,ramdisk.img and twrp8.img.you need to be access to twrp
volpula said:
if you can access fastboot mode,you need use extractor for your oreo files,extract kernel and ramdisk.img and flash,after that flash twrp recovery again
Click to expand...
Click to collapse
volpula said:
are you sure flash correctly files?you need oreo recovery.img,ramdisk.img and twrp8.img.you need to be access to twrp
Click to expand...
Click to collapse
Yes I have flashed correctly via fastboot. My phone just can't get enough battery charge to be able to boot to recovery it seems.
Ok, I'm on Oreo and I'm gonna give DC Phoenix a shot. Does anyone know which firmware files I need to download? Device is VTR-L09C432
MrDanMak said:
Yes I have flashed correctly via fastboot. My phone just can't get enough battery charge to be able to boot to recovery it seems.
Click to expand...
Click to collapse
you need reach twrp recovery.when you be in twrp take charge your phone %30 or %50.restart your phone press volume up when you see warning you need able to twrp.after that.copy hwota8_update.zip,Mha_recovery nocheck.img and vtr-l09c432b217 files.make new folder HWOTA8 and put this files,make wipe after that flash hwota8_update.zip
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
MrDanMak said:
Ok, I'm on Oreo and I'm gonna give DC Phoenix a shot. Does anyone know which firmware files I need to download? Device is VTR-L09C432
Click to expand...
Click to collapse
if you wanna rollback 7.0 nougat you need VTR-L09B217
Device has been rescued thanks to DC Phoenix and the latest Oreo update.
nice to hear
tried to downgrade with official app . now its bricked. no light non power noting. only fastboot working but i cant flash because its locked
bootloader status- locked
tried to flash with fastboot but no luck.
Ps-service center had to replace motherboard
Have you tried eRecovery method? Using SD card to do the installation.
---------- Post added at 07:16 PM ---------- Previous post was at 07:13 PM ----------
Also try the de-branding method
https://forum.xda-developers.com/honor-play/how-to/guide-debranding-fixing-honor-play-to-t3916999
rajit said:
tried to downgrade with official app . now its bricked. no light non power noting. only fastboot working but i cant flash because its locked
bootloader status- locked
tried to flash with fastboot but no luck.
Click to expand...
Click to collapse
Did you manage to recover bricked device ?
If yes, when how did you did this ?
Thank you in advance!
Maybe you could use Taobao and pay some CNY to flash your phone....