Hi everyone. I am rooted, with TWRP, version B170 and Magisk installed. Also some Magisk modules like Viper4Android, audio modification library and Busybox.
I want to uninstall it and install SuperSu, as some stuff like the adblock isn't working and didn't have problems in the past with SuperSu.
How may I proceed? Is it safe to do it or should I should I make a factory reset?
Thanks!
Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU
ChinHon said:
Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU
Click to expand...
Click to collapse
UnSu works for Magisk? The magisk app has an uninstall button, but don't know if that is safe.
The SuperSu zip has to be installed in TWRP right?
Thanks for the answer.
Enviado desde mi PRA-LX1 mediante Tapatalk
metabolito said:
UnSu works for Magisk? The magisk app has an uninstall button, but don't know if that is safe.
The SuperSu zip has to be installed in TWRP right?
Thanks for the answer.
Enviado desde mi PRA-LX1 mediante Tapatalk
Click to expand...
Click to collapse
I think magisk uninstall button is safe.
Or you could just re-flash boot.img. (Also I think magisk takes back-up of your boot.img and uninstall restores it. Not 100% sure but I think I read that from soemwhere.)
ChinHon said:
Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU
Click to expand...
Click to collapse
Man I did that and now I am stuck at "Your device is booting now...", what could go wrong?
No panic. Flash again the unSu, then the magisk uninstall by TWRP. Then restore again the stock kernel and flash superSu.
If this does not help:
Restore the stock kernel, flash magisk, uninstall magisk, restore again the stock kernel and flash superSu.
ChinHon said:
No panic. Flash again the unSu, then the magisk uninstall by TWRP. Then restore again the stock kernel and flash superSu.
If this does not help:
Restore the stock kernel, flash magisk, uninstall magisk, restore again the stock kernel and flash superSu.
Click to expand...
Click to collapse
It is not working, still stuck in the same place.
metabolito said:
It is not working, still stuck in the same place.
Click to expand...
Click to collapse
Do not have a backup which you can restore?
ChinHon said:
Do not have a backup which you can restore?
Click to expand...
Click to collapse
I don't have it. I don't care making a factory reset and then installing SuperSu, but how can I do that without bricking it?
Thanks for your time.
You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.
ChinHon said:
You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.
Click to expand...
Click to collapse
Did that, but the factory reset stays at 99%, and I have to force a reset, then it seems to end the factory reset, but it bootloops 1 time and then doesn't boot anymore...
Any other way to do it?
Oh men I miss my Moto G
Repeat the Factoryreset and have patience. The last% can take up to 30 minutes. If you still do not come to 100, repeat this in TWRP.
ChinHon said:
You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.
Click to expand...
Click to collapse
Waited for at least 45 minutes, but still in 99%.
Then installed TWRP and did factory reset but no luck, still it seems to boot but after the bootanimation it restarts and goes to eRecovery, then doesn't even try to boot.
What is the next step? Maybe I am not using the right boot.img? I am using the one you provided me.
Any unbrick tutorial to follow?
Thank you again..
The only chance for you is [How to unbrick] in the root tutorial. Please read through everything and follow the instructions exactly.
https://forum.xda-developers.com/p8...ei-p8-lite-2017-android-t3582179#post71670716
ChinHon said:
The only chance for you is [How to unbrick] in the root tutorial. Please read through everything and follow the instructions exactly.
https://forum.xda-developers.com/p8...ei-p8-lite-2017-android-t3582179#post71670716
Click to expand...
Click to collapse
That worked. I knew what I was risking with all this, so no problem. Now I am updating to B170 and then will install SuperSu,
Thank you for everything.
Sorry.... is it rooted?
JMO_Brown said:
Sorry.... is it rooted?
Click to expand...
Click to collapse
You mean after updating to B170? Yes I installed SuperSu with no problem.
metabolito said:
You mean after updating to B170? Yes I installed SuperSu with no problem.
Click to expand...
Click to collapse
Thanks man... Will try it tonight
JMO_Brown said:
Thanks man... Will try it tonight
Click to expand...
Click to collapse
Facing error mode!
jmo_brown said:
facing error mode!
Click to expand...
Click to collapse
big problem here
Related
I'm trying to get SuperSu to survive a factory reset.
delro92 said:
I'm trying to get SuperSu to survive a factory reset.
Click to expand...
Click to collapse
If you type in terminal in TWRP:
echo SYSTEMLESS=false>/data/.supersu
It will force it to install as normal and not systemless
Sent from my SCH-R220
That's it? no need to flash a special boot.img? Nothing? That's great! Thank you for your reply!
delro92 said:
That's it? no need to flash a special boot.img? Nothing? That's great! Thank you for your reply!
Click to expand...
Click to collapse
For me no need to flash a boot.img, I just reflashed Resurrection Remix and forced SuperSU to flash as system instead of systemless since ES File Xplorer has a problem with systemless root.
Sent from my SCH-R220
Is there anyway to root and still get OTA ?
anttaz said:
Is there anyway to root and still get OTA ?
Click to expand...
Click to collapse
You will get OTA, after Root also, but after updating your root will gone, recovery will replaced by Stock recovery, and if You are decrypted after update
it will get encrypted.
uttam.ace said:
You will get OTA, after Root also, but after updating your root will gone, recovery will replaced by Stock recovery, and if You are decrypted after update
it will get encrypted.
Click to expand...
Click to collapse
Does stock recovery not allow zip flashing?
anttaz said:
Does stock recovery not allow zip flashing?
Click to expand...
Click to collapse
It allows local upgrade, but it has not much flexibility like TWRP.
I've just updated from 4.0.2 to 4.0.3 and here's how my "OTA" was working:
1) Got notification that the update is available
2) Went to XDA to download OOS 4.0.3. full ROM zip, TWRP 3.1.4.1 image and Magisk 11.1 root
3) rebooted to TWRP, flashed new ROM, Magisk root and TWRP image.
As far as I know, that's the only sure way to update your phone while keeping root and TWRP.
Does it pass safety net?
anttaz said:
Does it pass safety net?
Click to expand...
Click to collapse
Yes, it does! With MagiskHide it works like a charm.
Will ota work for cleaning system for say arise sound mod or will have to use full? And does full wipe device clean?
anttaz said:
Will ota work for cleaning system for say arise sound mod or will have to use full? And does full wipe device clean?
Click to expand...
Click to collapse
I'm sorry, i didn't fully understand what you were trying to say here
But i'll take a wild guess and tell you that in TWRP you always need to flash full ROM, not OTA version. Otherwise your phone won't boot.
hrsa said:
I'm sorry, i didn't fully understand what you were trying to say here
But i'll take a wild guess and tell you that in TWRP you always need to flash full ROM, not OTA version. Otherwise your phone won't boot.
Click to expand...
Click to collapse
Along those lines in a way does full ROM zip wipe phone each flash?
anttaz said:
Along those lines in a way does full ROM zip wipe phone each flash?
Click to expand...
Click to collapse
Nope, it never wipes anything other than system, so all your data and apps are safe.
anttaz said:
Along those lines in a way does full ROM zip wipe phone each flash?
Click to expand...
Click to collapse
Does flashing full ROM zip wipe phone with each flash?
Thanks all
Which version twrp to use seen official and a few others in forum for our device??
Hello, sorry for my bad english (German). I installed the update too and now my root, recovery, kernel.... are away. When I try to flash the recovery or other stuff with cmd, is there an error message: FAILED (remote: Partition flashing is not allowed)
Got anyone an idea how i can flash my recovery again?
I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.
shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?
shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy
OK thanks! I thought the recovery would go back to stock after flashing the rom
And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0
b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!
b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs
OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject
b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!
I have an Mate 10 AL-L29. 4 days ago l tried to rebrand it to chinese model android 8.1, firmware 321. After rebrand l saw my emei is 0000000000. l did it some days ago and all was fine! Now if l make downgrade to a old firmware, my imei is fine, but if l do an upgrade to a new firmware, it doesn't matter ALP-L29 or ALP-AL00, my imei is gone! Right now l'm on the newest android 8.1- 325 firmware. All works good.....root, phone, google play etc..
The only problem is my Imei 000000000 , but MEID is ok.
Any solution guys? Thanks!
Try factory data reset.
badmania98 said:
Try factory data reset.
Click to expand...
Click to collapse
It was the first thing that l did... It isn't so simple....seems oeminfo don't do its job when l try to restore it. I have 2 backups of oeminfo, with twrp and with HwOta8_Mate10..
Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.
25Swagat said:
Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.
Click to expand...
Click to collapse
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.
ante0 said:
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.
Click to expand...
Click to collapse
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.
25Swagat said:
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.
Click to expand...
Click to collapse
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.
ante0 said:
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.
Click to expand...
Click to collapse
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!
25Swagat said:
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!
Click to expand...
Click to collapse
If it's working do explain how you did, in case others with the same problem see this
ante0 said:
If it's working do explain how you did, in case others with the same problem see this
Click to expand...
Click to collapse
I followed @Tecalote instructions posted at https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389
Hey, i want to unroot my rog Phone 3 and uninstall magisk.
Is it enough to flash the boot.img from the newest Stock Firmware or is there something else i should do?
Greets Justin
JSTNN said:
Hey, i want to unroot my rog Phone 3 and uninstall magisk.
Is it enough to flash the boot.img from the newest Stock Firmware or is there something else i should do?
Greets Justin
Click to expand...
Click to collapse
If you already have root and needs to go back to stock rom - download the Stock Boot Image
I already downloaded the Firmware but how can i go back? Just by flashing the boot.img from the Stock Firmware ?.
Yeah, since you only modified the boot.img right?
So just flash the stock boot.img
But the boot.img must be from the same rom version your currently on.
Yes just patched the Boot.img in the past via magisk
Can i just normally Update the Firmware after getting back to Stock ?
Yeah should be fine.
Do i need to uninstall magisk or something else Like this before ?
You can do both if you want, since uninstalling magisk just restores your stock boot.img backup but i recommend using magisk uninstaller zip if you have it with you.
After using magisk uninstaller zip no need to install boot.img again.
So you can just flash that.
I dont have the magisk uninstaller ZIP :/
Okay.... What is your magisk version.
23.0 the newest one ( i dont have any custom Recovery installed )
i flashed the rom and all is working fine, phone is unrooted and magisk uninstalled, thank you very much for your help have a nice day
JSTNN said:
i flashed the rom and all is working fine, phone is unrooted and magisk uninstalled, thank you very much for your help have a nice day
Click to expand...
Click to collapse
Nice! Sorry i wasnt online or i to would've sent the zip.
Well good luck!
Keno_I said:
Nice! Sorry i wasnt online or i to would've sent the zip.
Well good luck!
Click to expand...
Click to collapse
I want to unroot my phone as well, will it remove my phone data or just the root? I heard some people got bootlooped. Btw my phone has TWRP and bootloader unlocked. Sorry I'm new to this. Really appreciate if you'd help good sir.
Okay! You rooted with magisk?
Keno_I said:
Okay! You rooted with magisk?
Click to expand...
Click to collapse
Yes
Then flash the uninstaller zip.
Which version of magisk do you have?
Keno_I said:
Then flash the uninstaller zip.
Which version of magisk do you have?
Click to expand...
Click to collapse
2.3
Keno_I said:
Then flash the uninstaller zip.
Which version of magisk do you have?
Click to expand...
Click to collapse
Restore Images or Complete Uninstall? Will it factory reset?