Database Develop

Uninstall Magisk and Install SuperSu?

Hi everyone. I am rooted, with TWRP, version B170 and Magisk installed. Also some Magisk modules like Viper4Android, audio modification library and Busybox.
I want to uninstall it and install SuperSu, as some stuff like the adblock isn't working and didn't have problems in the past with SuperSu.
How may I proceed? Is it safe to do it or should I should I make a factory reset?
Thanks!

Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU

ChinHon said:
Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU
Click to expand...
Click to collapse
UnSu works for Magisk? The magisk app has an uninstall button, but don't know if that is safe.
The SuperSu zip has to be installed in TWRP right?
Thanks for the answer.
Enviado desde mi PRA-LX1 mediante Tapatalk

metabolito said:
UnSu works for Magisk? The magisk app has an uninstall button, but don't know if that is safe.
The SuperSu zip has to be installed in TWRP right?
Thanks for the answer.
Enviado desde mi PRA-LX1 mediante Tapatalk
Click to expand...
Click to collapse
I think magisk uninstall button is safe.
Or you could just re-flash boot.img. (Also I think magisk takes back-up of your boot.img and uninstall restores it. Not 100% sure but I think I read that from soemwhere.)

ChinHon said:
Flash this unSu by TWRP:
https://mega.nz/#!spkAgITB!GvlQWc8peSjcyWIkjUJhE6GEF4lcklDzMBY06qqzOsw
Restore the stock boot.img. Flash by adb.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Then root again with this SuperSu.
https://mega.nz/#!R5011SQA!i7PBLfoWXPD1Jgz1SsJ03cCk85cFKyKpvxrpmxlY5sU
Click to expand...
Click to collapse
Man I did that and now I am stuck at "Your device is booting now...", what could go wrong?

No panic. Flash again the unSu, then the magisk uninstall by TWRP. Then restore again the stock kernel and flash superSu.
If this does not help:
Restore the stock kernel, flash magisk, uninstall magisk, restore again the stock kernel and flash superSu.

ChinHon said:
No panic. Flash again the unSu, then the magisk uninstall by TWRP. Then restore again the stock kernel and flash superSu.
If this does not help:
Restore the stock kernel, flash magisk, uninstall magisk, restore again the stock kernel and flash superSu.
Click to expand...
Click to collapse
It is not working, still stuck in the same place.

metabolito said:
It is not working, still stuck in the same place.
Click to expand...
Click to collapse
Do not have a backup which you can restore?

ChinHon said:
Do not have a backup which you can restore?
Click to expand...
Click to collapse
I don't have it. I don't care making a factory reset and then installing SuperSu, but how can I do that without bricking it?
Thanks for your time.

You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.

ChinHon said:
You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.
Click to expand...
Click to collapse
Did that, but the factory reset stays at 99%, and I have to force a reset, then it seems to end the factory reset, but it bootloops 1 time and then doesn't boot anymore...
Any other way to do it?
Oh men I miss my Moto G

Repeat the Factoryreset and have patience. The last% can take up to 30 minutes. If you still do not come to 100, repeat this in TWRP.

ChinHon said:
You must flash the stock kernel and the stock recovery. Then you can make a factory reset without worry.
Click to expand...
Click to collapse
Waited for at least 45 minutes, but still in 99%.
Then installed TWRP and did factory reset but no luck, still it seems to boot but after the bootanimation it restarts and goes to eRecovery, then doesn't even try to boot.
What is the next step? Maybe I am not using the right boot.img? I am using the one you provided me.
Any unbrick tutorial to follow?
Thank you again..

The only chance for you is [How to unbrick] in the root tutorial. Please read through everything and follow the instructions exactly.
https://forum.xda-developers.com/p8...ei-p8-lite-2017-android-t3582179#post71670716

ChinHon said:
The only chance for you is [How to unbrick] in the root tutorial. Please read through everything and follow the instructions exactly.
https://forum.xda-developers.com/p8...ei-p8-lite-2017-android-t3582179#post71670716
Click to expand...
Click to collapse
That worked. I knew what I was risking with all this, so no problem. Now I am updating to B170 and then will install SuperSu,
Thank you for everything.

Sorry.... is it rooted?

JMO_Brown said:
Sorry.... is it rooted?
Click to expand...
Click to collapse
You mean after updating to B170? Yes I installed SuperSu with no problem.

metabolito said:
You mean after updating to B170? Yes I installed SuperSu with no problem.
Click to expand...
Click to collapse
Thanks man... Will try it tonight

JMO_Brown said:
Thanks man... Will try it tonight
Click to expand...
Click to collapse
Facing error mode!

jmo_brown said:
facing error mode!
Click to expand...
Click to collapse
big problem here

[ODIN] J700T Nougat 7.1.1

https://www.androidfilehost.com/?fid=889964283620761169
Grabbed straight from SamMobile. Flash using Odin.

Not for j700t1 though, correct?

AngryManMLS said:
Grabbed straight from SamMobile. Flash using Odin.
Click to expand...
Click to collapse
But how do you root after flashing this Nougat in J700T?

deloj said:
But how do you root after flashing this Nougat in J700T?
Click to expand...
Click to collapse
There's all sorts of knowledge in the thread
https://forum.xda-developers.com/galaxy-j7/j700t-development

Anything you see for the J700T is compatible with the J700T1. The phones are exactly the same minus 4 apps inside the system.
ctindell1981 said:
Not for j700t1 though, correct?
Click to expand...
Click to collapse

Is this Nougat stock rom for the samsung J700T? And how do I root it?

I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.

nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
There is no such rom for this model in nougat yet

nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.

nimbus22 said:
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.
Click to expand...
Click to collapse
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?

Once it's been on the screen saying t mobile for at least 10 mins, pull battery, boot to stock recovery, mount system, factory reset, reboot. There. Now u will hear t mobile jingle and it will reach set up wiz

nikkosaurus said:
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?
Click to expand...
Click to collapse
I flashed supersu after the dm verity had no problems

benny3 said:
I flashed supersu after the dm verity had no problems
Click to expand...
Click to collapse
Which TWRP version is people using?

https://forum.xda-developers.com/ga...ecovery-galaxy-j7-sm-j700t-t1-t3560342/page30
Same as mm

Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed

uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
Yes, it does
.

uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
hightech316 said:
Yes, it does
.
Click to expand...
Click to collapse

fullofhell said:
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
Click to expand...
Click to collapse
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.

carlosbalbuena_ said:
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.
Click to expand...
Click to collapse
That is bizarre. I tried official first and nothing would activate

fullofhell said:
That is bizarre. I tried official first and nothing would activate
Click to expand...
Click to collapse
I have all these modules active and it works perfectly

Upgrading without un-rooting OP3T

I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.

shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).

przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?

It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0

RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?

shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.

przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?

b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy

OK thanks! I thought the recovery would go back to stock after flashing the rom

And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0

b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs

BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!

b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs

OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject

b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!

Strange situation

I have an Mate 10 AL-L29. 4 days ago l tried to rebrand it to chinese model android 8.1, firmware 321. After rebrand l saw my emei is 0000000000. l did it some days ago and all was fine! Now if l make downgrade to a old firmware, my imei is fine, but if l do an upgrade to a new firmware, it doesn't matter ALP-L29 or ALP-AL00, my imei is gone! Right now l'm on the newest android 8.1- 325 firmware. All works good.....root, phone, google play etc..
The only problem is my Imei 000000000 , but MEID is ok.
Any solution guys? Thanks!

Try factory data reset.

badmania98 said:
Try factory data reset.
Click to expand...
Click to collapse
It was the first thing that l did... It isn't so simple....seems oeminfo don't do its job when l try to restore it. I have 2 backups of oeminfo, with twrp and with HwOta8_Mate10..

Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.

25Swagat said:
Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.
Click to expand...
Click to collapse
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.

ante0 said:
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.
Click to expand...
Click to collapse
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.

25Swagat said:
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.
Click to expand...
Click to collapse
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.

ante0 said:
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.
Click to expand...
Click to collapse
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!

25Swagat said:
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!
Click to expand...
Click to collapse
If it's working do explain how you did, in case others with the same problem see this

ante0 said:
If it's working do explain how you did, in case others with the same problem see this
Click to expand...
Click to collapse
I followed @Tecalote instructions posted at https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389

How to unroot????

anyone knows how to unroot?? im use room CN ver 2.30 have update to 2.31 but i can't download have a notice "your device is root" before yes i do root in my phone nubia red magic 3.
anyone can help give tutorial to unroot??? thx for the answer...

dolip86 said:
anyone knows how to unroot?? im use room CN ver 2.30 have update to 2.31 but i can't download have a notice "your device is root" before yes i do root in my phone nubia red magic 3.
anyone can help give tutorial to unroot??? thx for the answer...
Click to expand...
Click to collapse
Disable all modules on magisk and then click uninstall in Magisk Manager and then click complete removal.

alanzaki073 said:
Disable all modules on magisk and then click uninstall in Magisk Manager and then click complete removal.
Click to expand...
Click to collapse
I tried that but my phone did not boot up so I have to reflash version 2.30 again then updated to 2.31.

dolip86 said:
anyone knows how to unroot?? im use room CN ver 2.30 have update to 2.31 but i can't download have a notice "your device is root" before yes i do root in my phone nubia red magic 3.
anyone can help give tutorial to unroot??? thx for the answer...
Click to expand...
Click to collapse
Download v2.30
Extract it
Flash the boot.img
And now you are unrooted
Then update to v2.31
And root again

dolip86 said:
anyone knows how to unroot?? im use room CN ver 2.30 have update to 2.31 but i can't download have a notice "your device is root" before yes i do root in my phone nubia red magic 3.
anyone can help give tutorial to unroot??? thx for the answer...
Click to expand...
Click to collapse
With Flashify you can update your device, install OTA updates also official update. You can flash img files like recovery, Zip files. Also, you can install twrp recovery, cwm recovery, philz recovery directly on your phone. Flashify is required root permission to flash the zip, images so start the process after rooting the device.

em902566 said:
Download v2.30
Extract it
Flash the boot.img
And now you are unrooted
Then update to v2.31
And root again
Click to expand...
Click to collapse
I did this (reflash the stock boot.img) and it worked with other phone. However when I did this with red magic 3 my phone did not boot up so I have to reflash the entire v2.30 again.

tknguyencsu said:
I did this (reflash the stock boot.img) and it worked with other phone. However when I did this with red magic 3 my phone did not boot up so I have to reflash the entire v2.30 again.
Click to expand...
Click to collapse
I always do it on my RM3 and its working just fine
I think you flashed the wrong boot.img