https://www.androidfilehost.com/?fid=889964283620761169
Grabbed straight from SamMobile. Flash using Odin.
Not for j700t1 though, correct?
AngryManMLS said:
Grabbed straight from SamMobile. Flash using Odin.
Click to expand...
Click to collapse
But how do you root after flashing this Nougat in J700T?
deloj said:
But how do you root after flashing this Nougat in J700T?
Click to expand...
Click to collapse
There's all sorts of knowledge in the thread
https://forum.xda-developers.com/galaxy-j7/j700t-development
Anything you see for the J700T is compatible with the J700T1. The phones are exactly the same minus 4 apps inside the system.
ctindell1981 said:
Not for j700t1 though, correct?
Click to expand...
Click to collapse
Is this Nougat stock rom for the samsung J700T? And how do I root it?
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
There is no such rom for this model in nougat yet
nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.
nimbus22 said:
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.
Click to expand...
Click to collapse
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?
Once it's been on the screen saying t mobile for at least 10 mins, pull battery, boot to stock recovery, mount system, factory reset, reboot. There. Now u will hear t mobile jingle and it will reach set up wiz
nikkosaurus said:
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?
Click to expand...
Click to collapse
I flashed supersu after the dm verity had no problems
benny3 said:
I flashed supersu after the dm verity had no problems
Click to expand...
Click to collapse
Which TWRP version is people using?
https://forum.xda-developers.com/ga...ecovery-galaxy-j7-sm-j700t-t1-t3560342/page30
Same as mm
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
Yes, it does
.
uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
hightech316 said:
Yes, it does
.
Click to expand...
Click to collapse
fullofhell said:
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
Click to expand...
Click to collapse
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.
carlosbalbuena_ said:
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.
Click to expand...
Click to collapse
That is bizarre. I tried official first and nothing would activate
fullofhell said:
That is bizarre. I tried official first and nothing would activate
Click to expand...
Click to collapse
I have all these modules active and it works perfectly
Related
Hi Everyone, I am Pushkar Dua just wanted to share a rooting guide for Nexus 5 Android 5.0.1
As many people Reported that Root has stopped working after the 5.0.1 Update or previous Binaries lead device to Boot Loop,
Please Download Latest Binaries That i am providing here: http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
And flash it with TWRP recovery..
Please Use TWRP Version 2.8.1.0 as people reported some problems in latest 2.8.2.0 version.
Downlaload TWRP 2.8.1.0
Please note: if you're having a problem with twrp 2.8.1.0 asking for password..
Please use twrp 2.0.4.5
just reboot to system and you will have root access..
Watch the video for more info and Please Hit thanks or subscribe me on youtube to support me! every bit will be strongly appreciated!
Please Leave your questions BY QUOTING ME
Thanks
Thanks To @Chainfire for making this!
Original Thread for SuperSU : http://forum.xda-developers.com/showthread.php?t=1538053 Root Nexus 5 Lollipop 5.0.1
Hey!
Thanks a lot. Really helped solve my problem!
No problem
This doesn't belong in Development.
Actually i am not sure where should this be.. I'd request modders to please move it to the correct board!
Thanks man!
Delete
Since you've probably lost your custom recovery upgrading to 5.0.1, you can grab the TWRP images for Nexus 5 here: http://techerrata.com/browse/twrp2/hammerhead
I believe you need to use 2.8.1.0 since 2.8.2.0 either doesn't work or is causing problems for many users.
CF-Auto-root is still OK. I just tried
wondertx said:
CF-Auto-root is still OK. I just tried
Click to expand...
Click to collapse
Isn't CF-Auto root adding files from the 5.0 release over the 5.0.1 ? Isn't it safer to wait for a 5.0.1 autoroot?
wondertx said:
CF-Auto-root is still OK. I just tried
Click to expand...
Click to collapse
How did you update from a rooted (with CF-Auto Root) 5.0 to 5.0.1 you just received the OTA and installed it without any problems ?
I like to know because i am on 5.0 stock just rooted with CF_Auto root.
So no more need for CF-Auto?
Just flashing SuperSU zip with TWRP is enough?
I flashed a Custom Rom Using TWRP which doesn't have any root permission...
MrKaon said:
So no more need for CF-Auto?
Just flashing SuperSU zip with TWRP is enough?
Click to expand...
Click to collapse
Yes... Just Flashing with TWRP Is Enough!
Guys, i installed the 5.0.1 update by fastboot flashing system, boot and radio. I lost my custom recovery tho (CWR). I now tried to install TWRP, but after flashing the recovery image, the recovery still hasnt changed. Could i just flash CRW or should i use TWRP for this version?
Ubichinon said:
Guys, i installed the 5.0.1 update by fastboot flashing system, boot and radio. I lost my custom recovery tho (CWR). I now tried to install TWRP, but after flashing the recovery image, the recovery still hasnt changed. Could i just flash CRW or should i use TWRP for this version?
Click to expand...
Click to collapse
have you tried wugfresh's nexus toolkit to flash TWRP recovery???
maybe that works........ waiting for ur response... let me know..
pushkardua said:
have you tried wugfresh's nexus toolkit to flash TWRP recovery???
maybe that works........ waiting for ur response... let me know..
Click to expand...
Click to collapse
This. I flash with it here since 4.4.4 and it did everything just fine. Not only it is an app to automatically root, but it gives very good hints, and provides lots of others features like installing Apks, getting a adb prompt, and so much more. Greatest third party Android app I have tried. Highly recommended, didn't even had to wait they update it for 5.0.1, as soon I got the 5.0.1 OTA notification, Nexus Root Toolkit was already ready for it.
Ubichinon said:
Guys, i installed the 5.0.1 update by fastboot flashing system, boot and radio. I lost my custom recovery tho (CWR). I now tried to install TWRP, but after flashing the recovery image, the recovery still hasnt changed. Could i just flash CRW or should i use TWRP for this version?
Click to expand...
Click to collapse
This is lollipop security, custom recover wouldn't stick, after each reboot it will replaced with stock one, of course there is a way to make it sticky just search the forum.
Sent from my Nexus 5 using Tapatalk
MrKaon said:
So no more need for CF-Auto?
Just flashing SuperSU zip with TWRP is enough?
Click to expand...
Click to collapse
That's always been enough. You can use Cf's auto root if you don't want to use a custom recovery.
Molitro said:
That's always been enough. You can use Cf's auto root if you don't want to use a custom recovery.
Click to expand...
Click to collapse
I had similar discussion with Chainfire:
MrKaon said:
So guys for rooting lollipop on Nexus 5 stock all I need is flashing latest zip with TWRP?
No more need to flash modified kernel?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Chainfire said:
Initial root requires using CFAR. You can update using TWRP afterwards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I have tried via Flashify but cannot get it to work. I'm used to doing everything via TWRP but I know it is not an option at this time.
Any thoughts? How to install Xposed without TWRP? Currently on rooted ZV6.
happy_5 said:
I have tried via Flashify but cannot get it to work. I'm used to doing everything via TWRP but I know it is not an option at this time.
Any thoughts? How to install Xposed without TWRP? Currently on rooted ZV6.
Click to expand...
Click to collapse
Flashify only works if you have a custom recovery. AFAIK you can't flash the framework without it
Flashfire works without recovery.
LaughingCarrot said:
Flashfire works without recovery.
Click to expand...
Click to collapse
How can you flash a zip without recovery.
Wj287 said:
How can you flash a zip without recovery.
Click to expand...
Click to collapse
That's the exact reason Flashfire was made.
Got it working!
I was able to get it done via Flashfire. A bit difficult to find the app initially, but WORKS like a CHARM! Rooted with Xposed, fully working and tweaked to the gills.
I don't know if it is against the rules to post the Flashfire link.
happy_5 said:
I have tried via Flashify but cannot get it to work. I'm used to doing everything via TWRP but I know it is not an option at this time.
Any thoughts? How to install Xposed without TWRP? Currently on rooted ZV6.
Click to expand...
Click to collapse
Follow the instructions on this thread:
http://forum.xda-developers.com/g4/themes-apps/guide-installing-xposed-locked-t3181593
In addition you can download v79 instead of v74 as the instructions suggest and it will work fine.
I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.
shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?
shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy
OK thanks! I thought the recovery would go back to stock after flashing the rom
And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0
b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!
b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs
OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject
b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!
I have an Mate 10 AL-L29. 4 days ago l tried to rebrand it to chinese model android 8.1, firmware 321. After rebrand l saw my emei is 0000000000. l did it some days ago and all was fine! Now if l make downgrade to a old firmware, my imei is fine, but if l do an upgrade to a new firmware, it doesn't matter ALP-L29 or ALP-AL00, my imei is gone! Right now l'm on the newest android 8.1- 325 firmware. All works good.....root, phone, google play etc..
The only problem is my Imei 000000000 , but MEID is ok.
Any solution guys? Thanks!
Try factory data reset.
badmania98 said:
Try factory data reset.
Click to expand...
Click to collapse
It was the first thing that l did... It isn't so simple....seems oeminfo don't do its job when l try to restore it. I have 2 backups of oeminfo, with twrp and with HwOta8_Mate10..
Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.
25Swagat said:
Root works on ALP-AL00 8.1.0.326(C00) , how? I tried Magisk but the device gets stuck on 'your device is booting'.
Click to expand...
Click to collapse
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.
ante0 said:
Try patching ramdisk.img from Manager but make sure Preserve AVB/DM-Verity is checked, then flash it from fastboot.
Click to expand...
Click to collapse
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.
25Swagat said:
Do you mean the stock ramdisk.img of the software I'm in? If so, then I did that and checked Preserve AVB/DM-Verity in Magisk, then flashed the patched ramdisk.img in fastboot. After rebooting, I opened Magisk but it says Magisk is not installed.
Also, after that didn't work, tried installing it from Magisk.zip but it only downloads but doesn't get installed.
Click to expand...
Click to collapse
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.
ante0 said:
You have to flash the zip from TWRP. It doesn't flash if you aren't rooted already.
Click to expand...
Click to collapse
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!
25Swagat said:
I can't boot into twrp after flashing patched ramdisk. Do I have to flash twrp again? Somehow, while trying to get into TWRP, I can't but after rebooting Magisk is installed and works but after rebooting it isn't installed. Never mind mate I got it to work. Thanks!
Click to expand...
Click to collapse
If it's working do explain how you did, in case others with the same problem see this
ante0 said:
If it's working do explain how you did, in case others with the same problem see this
Click to expand...
Click to collapse
I followed @Tecalote instructions posted at https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389
Hey, i want to unroot my rog Phone 3 and uninstall magisk.
Is it enough to flash the boot.img from the newest Stock Firmware or is there something else i should do?
Greets Justin
JSTNN said:
Hey, i want to unroot my rog Phone 3 and uninstall magisk.
Is it enough to flash the boot.img from the newest Stock Firmware or is there something else i should do?
Greets Justin
Click to expand...
Click to collapse
If you already have root and needs to go back to stock rom - download the Stock Boot Image
I already downloaded the Firmware but how can i go back? Just by flashing the boot.img from the Stock Firmware ?.
Yeah, since you only modified the boot.img right?
So just flash the stock boot.img
But the boot.img must be from the same rom version your currently on.
Yes just patched the Boot.img in the past via magisk
Can i just normally Update the Firmware after getting back to Stock ?
Yeah should be fine.
Do i need to uninstall magisk or something else Like this before ?
You can do both if you want, since uninstalling magisk just restores your stock boot.img backup but i recommend using magisk uninstaller zip if you have it with you.
After using magisk uninstaller zip no need to install boot.img again.
So you can just flash that.
I dont have the magisk uninstaller ZIP :/
Okay.... What is your magisk version.
23.0 the newest one ( i dont have any custom Recovery installed )
i flashed the rom and all is working fine, phone is unrooted and magisk uninstalled, thank you very much for your help have a nice day
JSTNN said:
i flashed the rom and all is working fine, phone is unrooted and magisk uninstalled, thank you very much for your help have a nice day
Click to expand...
Click to collapse
Nice! Sorry i wasnt online or i to would've sent the zip.
Well good luck!
Keno_I said:
Nice! Sorry i wasnt online or i to would've sent the zip.
Well good luck!
Click to expand...
Click to collapse
I want to unroot my phone as well, will it remove my phone data or just the root? I heard some people got bootlooped. Btw my phone has TWRP and bootloader unlocked. Sorry I'm new to this. Really appreciate if you'd help good sir.
Okay! You rooted with magisk?
Keno_I said:
Okay! You rooted with magisk?
Click to expand...
Click to collapse
Yes
Then flash the uninstaller zip.
Which version of magisk do you have?
Keno_I said:
Then flash the uninstaller zip.
Which version of magisk do you have?
Click to expand...
Click to collapse
2.3
Keno_I said:
Then flash the uninstaller zip.
Which version of magisk do you have?
Click to expand...
Click to collapse
Restore Images or Complete Uninstall? Will it factory reset?