Hello, friends.
I've managed to pay and downloaded the latest firmware.
Please note, that it's not an update, you device will be renewed and all user data will be lost.
To install:
1. Extract TAR files from the RAR archives
2. Reboot the device to DOWNLOAD mode
HOW TO ENTER DOWNLOAD MODE ON SAMSUNG GALAXY TAB S 10.5
You must start by turning the Samsung Galaxy Tab S off completely. You can do that one of two ways: quickly press the Power button and then select the ‘Switch Off’ option from the menu. Alternatively, you can long-press the Power button and it will eventually turn off. Just make sure it’s not sleeping and is all the way off.
Now reboot the Samsung tablet holding the Power and Volume Down buttons. Some version might need the Power + Volume Down + Home button.
Wait for the screen to change before letting go of the buttons. You should see the screen telling you it’s ‘downloading’ .
Press the Volume Up button to continue past this point.
Once you have pressed the Volume Up button you should see the warning message leaving the Samsung tablets display.
Now you are ready to connect the Samsung Galaxy tab S to the computer and use the device in download mode
3. Connect the device to a USB port of PC
4. Download and run ODIN
5. Place
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the BL slot
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the AP slot
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CP slot
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CSC slot
6. click START
DOWNLOAD:
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Just don't flash the CSC part to keep data.
Loaded it and working fine here. Thanks!
Amazing
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!
leswgnr said:
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!
Click to expand...
Click to collapse
Many thanks. It's highly appreciated. Merry Xmas!
Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.
Will I keep root?
If I flash this will I still be rooted? Thanks for this info. I was beginning to think I was stuck on kitkat forever.
P.S. I have no problem buying a few beers (or shots, hey its cold out man gotta warm up) for anyone helping me get an update on my device so that i can keep root.
Luigi_ said:
Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.
Click to expand...
Click to collapse
No, this is for SM-T807A only.
Griefstruelove said:
If I flash this will I still be rooted?
Click to expand...
Click to collapse
Unfortunately this will remove root.
I would gladly make a donation but this is not working!
jb1974 said:
I would gladly make a donation but this is not working!
Click to expand...
Click to collapse
Explain 'not working'. Not enough info.
ashyx said:
Explain 'not working'. Not enough info.
Click to expand...
Click to collapse
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?
jb1974 said:
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?
Click to expand...
Click to collapse
Post a screen shot of the device screen.
SM-T807A MM Root?
AlexNI said:
Unfortunately this will remove root.
Click to expand...
Click to collapse
Is there a MM root yet for the SM-T807A?
Thanks! I needed to upgrade one of these. Sadly, it seems outdated firmware is the least of it's problems
Related
I've been trying to flash the TMobile newest firmware to my unlocked Verizon Note 8 but for some reason the flash didn't occur. It ends with the code:
all threads completed. (succeed 0 / failed 1)
And the installation never starts, is this normal? for VZW phones can i only flash n950U1 firmwares and VZW?
betovanbuuren said:
I've been trying to flash the TMobile newest firmware to my unlocked Verizon Note 8 but for some reason the flash didn't occur. It ends with the code:
all threads completed. (succeed 0 / failed 1)
And the installation never starts, is this normal? for VZW phones can i only flash n950U1 firmwares and VZW?
Click to expand...
Click to collapse
Should be able to...some times you need to perform a factory reset in recovery then back out to main recovery menu and select boot to bootloader then flash using Odin...AP, BL, CP, CSC, and USERDATA...
BlueFox721 said:
Should be able to...some times you need to perform a factory reset in recovery then back out to main recovery menu and select boot to bootloader then flash using Odin...AP, BL, CP, CSC, and USERDATA...
Click to expand...
Click to collapse
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
betovanbuuren said:
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
Click to expand...
Click to collapse
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
BlueFox721 said:
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
Click to expand...
Click to collapse
Im using price comsy's odin, but i'm accesing with the button combination, i will access recovery and from there going to download mode, let me try and i will report back.
Thanks @BlueFox721
BlueFox721 said:
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
Click to expand...
Click to collapse
I've access recovery menu and went to bootloader mode from there, but same case, the log is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do i need to do the factory reset?? i'm thinking that if i do the factory reset and the result is the same i will need to do the process again to set up my settings....
betovanbuuren said:
I've access recovery menu and went to bootloader mode from there, but same case, the log is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do i need to do the factory reset?? i'm thinking that if i do the factory reset and the result is the same i will need to do the process again to set up my settings....
Click to expand...
Click to collapse
Use regular Odin next time...factory reset does matter some times
BlueFox721 said:
Use regular Odin next time...factory reset does matter some times
Click to expand...
Click to collapse
Can i skip the factory reset part or is mandatory?
betovanbuuren said:
Can i skip the factory reset part or is mandatory?
Click to expand...
Click to collapse
It helps sometimes..
BlueFox721 said:
It helps sometimes..
Click to expand...
Click to collapse
Tried with regular odin and same story, no luck. Looks like i may need to do a factory reset...hope that way helps
betovanbuuren said:
Tried with regular odin and same story, no luck. Looks like i may need to do a factory reset...hope that way helps
Click to expand...
Click to collapse
If no luck..try again from factory binary...in other words follow the switching carrier guide but with updated files...that should clean things up...then at step 25 pick XAA or carrier of choice...
BlueFox721 said:
If no luck..try again from factory binary...in other words follow the switching carrier guide but with updated files...that should clean things up...then at step 25 pick XAA or carrier of choice...
Click to expand...
Click to collapse
Can you please point me to the switching carrier guide url?
Guys if it fails at setup connection its the computer. Have to use a different usb port or computer
betovanbuuren said:
Can you please point me to the switching carrier guide url?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74087344&postcount=2
Hey folks. So I'm trying to update the version of Oreo I'm running on my VZW Galaxy S8 but I can't seem to get Odin to work so I can revert back to Nougat BQL1. It keeps failing for some reason. Here's a copy of the log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone tell me what I'm doing wrong?
I had the same problem and then was told to try a usb 2.0 port which solved my issue.
https://forum.xda-developers.com/ga...pdragon-s8-t3700907/post75363170#post75363170
brdsng said:
I had the same problem and then was told to try a usb 2.0 port which solved my issue.
https://forum.xda-developers.com/ga...pdragon-s8-t3700907/post75363170#post75363170
Click to expand...
Click to collapse
Did what you suggested but I'm now in even deeper. While flashing the system.img to my S8, it hangs at a certain spot for hours on end. I spent all last night trying to get it to work but no luck. Now, I'm stuck with a "Software Update Failed" message on my screen.
[email protected] said:
Did what you suggested but I'm now in even deeper. While flashing the system.img to my S8, it hangs at a certain spot for hours on end. I spent all last night trying to get it to work but no luck. Now, I'm stuck with a "Software Update Failed" message on my screen.
Click to expand...
Click to collapse
Make sure if you are on Windows 10 that there are not updates available for your computer. If not try a different computer or shut down then restart your computer and start the whole process over. You should be able to get back into download mode on your phone.
jrcdpm said:
Make sure if you are on Windows 10 that there are not updates available for your computer. If not try a different computer or shut down then restart your computer and start the whole process over. You should be able to get back into download mode on your phone.
Click to expand...
Click to collapse
Been trying to get it to work but no luck. I've tried two different computers, a variety of different firmwares, and even the Verizon Software Repair Assistant with no luck. I'm really desperate at this point. I can't seem to find a solution to the problem I'm having.
[email protected] said:
Been trying to get it to work but no luck. I've tried two different computers, a variety of different firmwares, and even the Verizon Software Repair Assistant with no luck. I'm really desperate at this point. I can't seem to find a solution to the problem I'm having.
Click to expand...
Click to collapse
Have you tried a different version of Odin? I had very similar issues however, in the end, it was the usb cable.
I had the same issue. I had to reinstall the samsung drivers to my computer. Solved immediately.
dtroup64 said:
I had the same issue. I had to reinstall the samsung drivers to my computer. Solved immediately.
Click to expand...
Click to collapse
Also make sure u are trying reg Odin not comsy
I've been trying to go from crag to bql1 and I've been unable to. Same error as above, I'm using same laptop/port that got me to crag. I've tried another laptop and other parts and it just fails, same thing Everytime.
Using same Odin, original usb cable/same that got me to crag. Any ideas for me? Thanks
So I got the unlocked version and downloaded the Beta. Anyway, it's causing problems with some of my apps and neutered down others like gmail you can just auto guess an email address when sending an email and other reasons too I want this POS off my phone.
Someone on android central said go into smart switch. I go in there and it gives no option to roll back. Just asks if you want to transfer from an old device using a cable or do it wireless, no other options.
I don't want this on my phone. I need it off it.
It's usually a good idea to understand how to restore before installing unstable software on your phone... The instructions are on the registration page in Samsung Members, that you visited when you registered for the beta.
Just download the latest Oreo firmware from Samfirm and reinstall with Odin.
I think OP question was about official method to roll back to Oreo. I think he or she would need to use the "deregister" option within the Samsung members app then try using smartswitch or whatever that was mentioned in the official faq .
willhemmens said:
It's usually a good idea to understand how to restore before installing unstable software on your phone... The instructions are on the registration page in Samsung Members, that you visited when you registered for the beta.
Just download the latest Oreo firmware from Samfirm and reinstall with Odin.
Click to expand...
Click to collapse
Sent from my SM-N960U1 using Tapatalk
Limeybastard said:
I think OP question was about official method to roll back to Oreo. I think he or she would need to use the "deregister" option within the Samsung members app then try using smartswitch or whatever that was mentioned in the official faq .
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
Yeah, I gave that answer. "The instructions are on the registration page in Samsung Members, that you visited when you registered for the beta."
I am trying this now myself. Backing up first just in case . The option to roll back on the PC via smartswitch was available to me even without deregistering , but we'll seen if it works in a few moments.
willhemmens said:
Yeah, I gave that answer. "The instructions are on the registration page in Samsung Members, that you visited when you registered for the beta."
Click to expand...
Click to collapse
Sent from my SM-N960U1 using Tapatalk
Limeybastard said:
I am trying this now myself. Backing up first just in case . The option to roll back on the PC via smartswitch was available to me even without deregistering , but we'll seen if it works in a few moments.
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
interesting i need to try this
Also, from what i have read, downgrading will cause a factory reset, so you will need to setup all apps again. SmartSwitch may help with this ...
keredini said:
Also, from what i have read, downgrading will cause a factory reset, so you will need to setup all apps again. SmartSwitch may help with this ...
Click to expand...
Click to collapse
I used smartswitch on my laptop to backup contacts, calls, texts, apps data and photos on internal storage before I upgraded to pie so should be easier to go back to oreo if i decide to
Ok
oneandroidnut said:
interesting i need to try this
Click to expand...
Click to collapse
Ok, just finished rolling back to oreo using smartswitch via PC. I didn't need to deregister from the Samsung beta member app.
A couple of observations, it wiped the device completely and also the last backup I had performed prior to rolling back oreo ( was a one ui backup ) would not restore my 8.5k text messages. It shows them all in smartswitch on my PC as well as not giving any errors during restore, says successful yet when you open Samsung messages there is nothing there. Just an fyi that the txt messages backup from One UI won't restore back to Oreo.
Sent from my SM-N960U1 using Tapatalk
So if I roll back to Oreo I will lose my text messages even though I backed them up?
Blues fan said:
So if I roll back to Oreo I will lose my text messages even though I backed them up?
Click to expand...
Click to collapse
Only if your last backup of it was from One UI.
Sent from my SM-N960U1 using Tapatalk
Blues fan said:
So if I roll back to Oreo I will lose my text messages even though I backed them up?
Click to expand...
Click to collapse
No all cool
Like I said, if your backup was performed when you had One Ui then it will not restore your text messages back into Oreo.
leos0000 said:
No all cool
Click to expand...
Click to collapse
Sent from my SM-N960U1 using Tapatalk
Limeybastard said:
Like I said, if your backup was performed when you had One Ui then it will not restore your text messages back into Oreo.
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
should be able to use an sms backup and restore app and do it and have all together still from pie and oreo
I am actually having issues here also. I installed the beta, its fine. But I need to return the phone to Best Buy. I ended up finally getting my Samsung.com order. When I entered the beta I confirmed there is a downgrade path with Samsung Smart Switch. When I connect the phone, it recognizes it, and it even has the option "restore to previous software" simple, I clicked that, it downloaded, rebooted my phone into download mode, and then nothing. Just sits there. I have tried rebooting the PC, a/v turned off. usb 2.0 and usb 3.0, OEM cable and a high end 3rd party cable. Any other idea?
I can use odin, I havent used it since s4 days. But I can do it if needed, I was worried it wouldnt like reverting back to the stock firmware after this beta.
JediSamReye said:
I am actually having issues here also. I installed the beta, its fine. But I need to return the phone to Best Buy. I ended up finally getting my Samsung.com order. When I entered the beta I confirmed there is a downgrade path with Samsung Smart Switch. When I connect the phone, it recognizes it, and it even has the option "restore to previous software" simple, I clicked that, it downloaded, rebooted my phone into download mode, and then nothing. Just sits there. I have tried rebooting the PC, a/v turned off. usb 2.0 and usb 3.0, OEM cable and a high end 3rd party cable. Any other idea?
I can use odin, I havent used it since s4 days. But I can do it if needed, I was worried it wouldnt like reverting back to the stock firmware after this beta.
Click to expand...
Click to collapse
Just use ODIN then. I've gone back and forth a few times.
Mr. Orange 645 said:
Just use ODIN then. I've gone back and forth a few times.
Click to expand...
Click to collapse
I am having issues with ODIN also, now that I am trying it. I wonder if I have the incorrect drivers for the phone, I installed with Smart Switch, and also their stand alone USB drivers.
I get a blue 0:[COM4] and I select the AP file, and I select start
and I get
<OSM> All threads completed. (succeed 0 / failed 1)
JediSamReye said:
I am having issues with ODIN also, now that I am trying it. I wonder if I have the incorrect drivers for the phone, I installed with Smart Switch, and also their stand alone USB drivers.
I get a blue 0:[COM4] and I select the AP file, and I select start
and I get
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So you're only flashing the AP file? Why?
Mr. Orange 645 said:
So you're only flashing the AP file? Why?
Click to expand...
Click to collapse
I was following a tutorial, I thought that was strange. But I will add them all. I will update shortly
---------- Post added at 05:44 AM ---------- Previous post was at 05:37 AM ----------
Mr. Orange 645 said:
So you're only flashing the AP file? Why?
Click to expand...
Click to collapse
Ok, still failing, its instantly. Like click start and then that happens.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7159 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7159 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
JediSamReye said:
I was following a tutorial, I thought that was strange. But I will add them all. I will update shortly
---------- Post added at 05:44 AM ---------- Previous post was at 05:37 AM ----------
Ok, still failing, its instantly. Like click start and then that happens.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7159 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7159 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Try a different USB cable and a different USB port. Different computer if you can. It has to do with the connection.
I am located in Peru and my phone is SM-N950F.
Pie disabled the above feature so I flashed the latest ROM for my phone from Sammobile. The ROM works fine but I still can't use both SIM cards+SD card.
I was told to use an older ROM (June 2018 or earlier), but I get a Fail message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N950FXXS3CRF1_CL13094739_QB18404863_REV00_user_ low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N950FXXS3CRF1_CL13094739_QB18404863_REV00_user_ low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N950FXXU3CRE1_CP9610557_CL13094739_QB17995241_R EV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_UWB_N950FUWB3CRE3_CL13598793_QB18106469_REV00_ user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried using two versions of Odin. I did restart my computer. I'm using the same cable.
Other than the Sammobile firmwares, can I download another ROM that will let me use both SIM+SD cards?
Thanks.
octavia said:
I am located in Peru and my phone is SM-N950F.
Pie disabled the above feature so I flashed the latest ROM for my phone from Sammobile. The ROM works fine but I still can't use both SIM cards+SD card.
I was told to use an older ROM (June 2018 or earlier), but I get a Fail message:
I tried using two versions of Odin. I did restart my computer. I'm using the same cable.
Other than the Sammobile firmwares, can I download another ROM that will let me use both SIM+SD cards?
Thanks.
Click to expand...
Click to collapse
Use the last oreo firmware you'll might need to factory reset your phone though.
What is your csc?
eg.
PEO - N950FXXS 5 CSA1 (OREO)
Make sure the firmware has a "5" in the ninth spot. Notice the spaced out 5 in above PEO firmware..
Thank you @BluePhnx. Right now I have installed N950FXXU5CRL1. It's Oreo and it works but it doesn't read both SIM cards and the SD card at the same time.
Firmware from Sammobile N950FXXS3CRF1_N950FUWB3CRE3_PEO resulted in a Fail. O was gonna try with other two but none of them has the five on the 9th spot, so I guess they're going to fail too.
The only FW with the 5 in the 9th spot are relatively recent and Pie. I can't see find a older oreo FW with the 5.
octavia said:
Thank you @BluePhnx. Right now I have installed N950FXXU5CRL1. It's Oreo and it works but it doesn't read both SIM cards and the SD card at the same time.
Firmware from Sammobile N950FXXS3CRF1_N950FUWB3CRE3_PEO resulted in a Fail. O was gonna try with other two but none of them has the five on the 9th spot, so I guess they're going to fail too.
The only FW with the 5 in the 9th spot are relatively recent and Pie. I can't see find a older oreo FW with the 5.
Click to expand...
Click to collapse
That 5 is the bootloader version and it won't allow you to downgrade itself to version 4 or 3. Only goes up in version.
You'll just need to find a firmware with bl v5 that will work..
BluePhnx said:
That 5 is the bootloader version and it won't allow you to downgrade itself to version 4 or 3. Only goes up in version.
You'll just need to find a firmware with bl v5 that will work..
Click to expand...
Click to collapse
Thank you again.
I'm gonna install:
Security Patch Level 2018-09-01
Product code PEO
PDA N950FXXU5CRHA
CSC N950FUWB5CRI1
I guess it should work since it's the oldest with the 5 bl.
I'm also facing the same problem after updating it to PIE in India. Unable to use 2 sim and ad card.
Please suggest something good so it works.
octavia said:
I am located in Peru and my phone is SM-N950F.
Pie disabled the above feature so I flashed the latest ROM for my phone from Sammobile. The ROM works fine but I still can't use both SIM cards+SD card.
I was told to use an older ROM (June 2018 or earlier), but I get a Fail message:
I tried using two versions of Odin. I did restart my computer. I'm using the same cable.
Other than the Sammobile firmwares, can I download another ROM that will let me use both SIM+SD cards?
Thanks.
Click to expand...
Click to collapse
note 8 stuck on "An error has occured while updating the deivce software........"
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
YukiArima said:
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
Click to expand...
Click to collapse
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
MrMike2182 said:
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
Click to expand...
Click to collapse
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
YukiArima said:
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
BluePhnx said:
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
YukiArima said:
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
Click to expand...
Click to collapse
You can not get into download mode with power+bixby+vol-down at all?
Can you get into recovery mode?
If you can try doing a factory reset or selecting the option to boot into download mode.
Try using Samsung smart switch on pc to do a factory recovery.
Or visit a Samsung repair store.
plz help
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
mrbigruben said:
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
Click to expand...
Click to collapse
You are probably better off asking for help in the thread of the rom you tried to flash (try seaching on the thread for the same problem as yours first), or creating your own thread to ask for help.