Database Develop

Huawei p7 restarts

Hi i have problem iwe rooted my phone with kingroot and now it keeps restarting after 4-5 sec when its on. I tryed to go recovery volume up and power it does not enter. Can someone help what do too?

if your P7 is rooted, then install quick reboot apk from playstore, and from it go to recovery mode

Huawei w to i install it when it reboots so fast?
Sent from my MediaPad T1 8.0 Pro using Tapatalk

use " P7-Easy_Update_and_Adjust", search it on forum

Fullbricked Mate S - No signs of life whatsoever

I have a Huawei Mate S CRR-L09 with the B145 Firmware installed on it. Yesterday I tried upgrading to the latest official Marshmallow version (B321). In order to do so I was told by a german Huwei blog to upgrade to B303 first. I could not complete the first update, since TWRP gave me an error that the zip could not be installed ("error executing updater binary in zip"). So I assumed, the "update.zip" did not go through.
Since I was at work and had no time I didn't proceed in trying. That was in the early afternoon.
FAST FORWARD
Later at night I went to bed, changed the alarm clock, pressed the "Power" button to turn off the display and put the smartphone aside. About 10-20 seconds later the display woke up and was fully white. The phone was unresponsive and the only thing I could do was to power it off by pressing and holding the "Power" button for about 10 seconds. Since then the Mate S is dead:
- Can not turn it on anymore
- No way to get into recovery or download mode
- No sign of life when connected to a Windows computer (USB 2.0) or power outlet (status LED won't turn on)
- adb on Windows won't recognize the device
The battery was not full when it got bricked, but it had at least enough power to last the whole night (maybe something like 30-70%, don't know anymore).
Do you think a USB Jig or Jtag would help? Thanks in advance!
EDIT: Also noteworthy is that I changed my SIM card the same day as well. It's from a new carrier so I got the new carrier settings installed via SMS.

before doing an update read carefully what you have to do before updating!
everywhere in the huawei section (from p6 to p8 and all the mate series) you can read that you can't make an official update with a custom recovery..
so..what you can try to do is to get into fastboot mode or recovery mode (second should bring you to twrp)..when you are there you might be able to restart your phone on fastbootmode which allows you to flash the stock recovery.img of the b145 (how to get stock img files is described in the thread named "huawei update extractor" - just search for it)..
sometimes it takes some time (more than 15seconds until the phone shows some reaction..just try it..
had a similar problem with my old p6..was frustrated..but after a calm down and some research i found on the p6-section some workaround..
good luck
Gesendet von meinem Mate S CRR-L09 B321

Thank you for the quick reply, bluelBl!
blueIBI said:
... everywhere in the huawei section (from p6 to p8 and all the mate series) you can read that you can't make an official update with a custom recovery..
Click to expand...
Click to collapse
Oops, alright. Well, I don't think my failed try in updating was the origin of the brick, do you? The whole install progress did not went through.
blueIBI said:
so..what you can try to do is to get into fastboot mode or recovery mode1
Click to expand...
Click to collapse
How am I supposed to get into fastboot or recovery? Pressing (and holding) the required buttons (Vol Up + Power) don't do anything.

you tried to install stock firmware through a custom recovery, and that "softbricked" your phone..
press the buttons longer..if there is jo reaction, well, than you should ask for a service
Gesendet von meinem Mate S CRR-L09 B321

blueIBI said:
you tried to install stock firmware through a custom recovery, and that "softbricked" your phone..
Click to expand...
Click to collapse
I'm not too sure about that, since I went on using the phone in everday life without any problems. Just at the end of the day my phone gave up, so to speak.
Well, I could keep on rambling about the "coulds" and "woulds"... Anyways, pressing those buttons even longer didn't do anything.

then contact a support/dealer for repair..
this may cause costs..
sry for that..
Gesendet von meinem Mate S CRR-L09 B321

blueIBI said:
then contact a support/dealer for repair..
Click to expand...
Click to collapse
Thanks for the help anyways. I was hoping someone has had similar experiences and suggests a foolproof method like using a JTAG or whatnot.

maybe you´re lucky and still have an update.app file in your dload folder. Try pressing vol+, vol- and power all together. then when the huawei logo apperas, release the power button but keep holding the vol+ and vol-. after a while the EMUI Update prozess will start. this could solve your problem.

2 years after, I do the same!
my crr-ul20 is dead by wrong firmware; no sign of life and ther is no solution on the forum.

Can't enter TWRP, stuck at "Your device is booting now..."

Hello,
i unlocked my Bootloader and flashed twrp using adb,
but when i now try to enter twrp i get to the screen:
Your device has been unlocked and
can't be trusted.
To learn more,visit:
a useless link blabla
Your device is booting now....
Click to expand...
Click to collapse
and there i get stuck because is does not boot ,
i waited for 10min but nothing happend.
I can still boot the phone normally by entering the fastboot mode and rebooting it from there, but i can't use twrp to install cm13 .
I tried this https://forum.xda-developers.com/p9/how-to/trouble-entering-twrp-t3541212 but it did not work.

Just press volume down and power button to enter fast boot, then flash stock recovery, reboot , afterwards try unlock bootloader and try twrp recovery again, for ease use srk tool 2.0

I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer

And what version works with Nougat?

henryco11 said:
And what version works with Nougat?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
sadly you're not able to flash anything except some special supersu version, because of some reasons (the missing decryption support i guess?).

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
and how you solved pleaseeeee

mendja said:
and how you solved pleaseeeee
Click to expand...
Click to collapse
The answer to your question is in the post that you quoted... lol. Try reading it again.

a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you

mendja said:
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
Click to expand...
Click to collapse
same here. did you find a solution?

Unable to boot in TWRP 3.1.0-0, hanging at "Your device is booting now......"
eelc said:
same here. did you find a solution?
Click to expand...
Click to collapse
Has anyone found a solution to this yet?
Regards

First think whats your device.
Some of you here flashing different recovery or are in different device forum.

salineBoy said:
Has anyone found a solution to this yet?
Regards
Click to expand...
Click to collapse
hey, i have.

dkionline said:
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
Click to expand...
Click to collapse
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.

am on PRA-LX1C432b106, dual sim edition i've unlocked the boot loader and receive your device is unlocked and cannot be trusted . to learn more visit... your device is booting now, but he do not boot. After a complete drain of the battery with the charger plugged in i can boot in software. but i do not have a keyboard option and any google play store account. cannot format wipe because miss of the keyboard . the question it is OK to install VNS-L31 software firmware on my device? And what version to put ?

i want apply themes but not working .. i know it problem is hw init is missing . so i unzip speacseas c636 for update.app and flash dload method .. but it goes to bootloop .. i flash mm stock update.app also not working .. try flash rollback package .. bootloop and cant enter recovery and erecovery.. my fastboot is frp lock and phone locked .. i see at screen " connect hisuite " at last try it uncompatible .. so what i could do for saving my phone life ?

salineBoy said:
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
Click to expand...
Click to collapse
Button combo works everytime if u do it right.
Hold both keys until the Huawei Logo dissappear and it will work.

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
can you lead me into the version of the twrp you used ? i have nougat too and installed the latest twrp there with no luck

you used orginal recovery from twrp. me? rom manager download this recovery. Unlock bootloader again. Flash b136 from twrp 3.0.2.0 after flas b136 with dload folder after b182 and b210 after unlock bootloader again and update to nougat.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka

I unlocked bootloader, installed twrp using fastboot and then as you enter reboot command, you need to hold volume up and power button and hold down to avoid going to standard recovery. It took several attempts to do it (re-installing twrp every time), but worked on C432383 which is Nougat

Well it looks like you actually have to hold power + volume up when the phone is off and release all keys 0.5-1 seconds after the screen lights up with Huawei logo / text to boot into the custom recovery or else it will just boot Huawei eRecovery...

[Q] EMUI 5.X Recovery dissapear after installing TWRP - 3.0.3.0-eva

Hello Guys, I have a bad situations here, so I will give you info what I have done.
1. Auto-update to EMUI 5 Android 7.0 B378
2. Unlock the bootloader
3. Flash modified B378 boot image+phh+ JRummy's Busybox Installer
4. Enter in fastboot mode and install twrp 3.0.3.0 (succefully install)
5. Fastboot reboot and then remove the usb cable and boot into recovery by pressing the vol. up
After the reboot and boot into recovery (3 seconds hold the vol. up)turns out that I am located into Huawei eRecovery. When I hit the "Download lates version and recovery" nothing happen I received an error that I am not able to install it.
Also the TWRP is not isntalled and at the End I do not have an Recovery and I am not able to install any thing.
My question is did I somehow brick my phone, What are the exact steps for installing TWRP ???
THanks in advanced.

If you power down completely, and then hold vol up and power, you should enter twrp. That works for me
Sendt fra min EVA-L09 med Tapatalk

Yep, it works. Thanks mate!!!!

Any hope for my softbricked P30 pro?

Hi all!
I got a softbricked P30 pro cheap from a friend, and was hoping to be able to fix it.
I started by flashing a Emui 9 firmware with OTG-method and it flashed succesfully, but still boot loop.
Did the same with a Emui 10 firmware but still no luck.
Now i cant get into download mode with Volume up + down combo (emui 9 method) OR Emui 10 method, it only goes to eRecovery with no option to read from OTG.
Using fastboot it appears that the phone is still on EMUI 9.
I have no more ideas now. Does anyone have an idea how i can proceed? Any help is greatly appreciated.

widbjörn said:
Hi all!
I got a softbricked P30 pro cheap from a friend, and was hoping to be able to fix it.
I started by flashing a Emui 9 firmware with OTG-method and it flashed succesfully, but still boot loop.
Did the same with a Emui 10 firmware but still no luck.
Now i cant get into download mode with Volume up + down combo (emui 9 method) OR Emui 10 method, it only goes to eRecovery with no option to read from OTG.
Using fastboot it appears that the phone is still on EMUI 9.
I have no more ideas now. Does anyone have an idea how i can proceed? Any help is greatly appreciated.
Click to expand...
Click to collapse
Hi m8,
Can you tell me what cust your device is? You said that on Fastboot is still EMUI 9.1.
Sent from my VOG-L29 using Tapatalk

silviuo said:
hi m8,
can you tell me what cust your device is? You said that on fastboot is still emui 9.1.
Sent from my vog-l29 using tapatalk
Click to expand...
Click to collapse
vog-l29 9.1.0.193 (c431e4r2p2)

widbjörn said:
vog-l29 9.1.0.193 (c431e4r2p2)
Click to expand...
Click to collapse
OK, as it seems from your OP, you had EMUI 9.1 and then flashed EMUI 10, but with bootloop. You will need to download latest EMUI 10, enter eRecovery (as i will write you down) and flash the firmware.
It doesn't require a cable plugged in. ON EMUI 10 enter eRecovery by pressing POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Firmware for your device:
Huawei P30 PRO VOG-L29 C431 v10.0.0.190
GDRIVE VOGUE-L29C 10.0.0.190(C431E19R2P5)_Firmware_EMUI10.0.0_05016DYH online
Sent from my VOG-L29 using Tapatalk

SilviuO said:
OK, as it seems from your OP, you had EMUI 9.1 and then flashed EMUI 10, but with bootloop. You will need to download latest EMUI 10, enter eRecovery (as i will write you down) and flash the firmware.
It doesn't require a cable plugged in. ON EMUI 10 enter eRecovery by pressing POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Firmware for your device:
Huawei P30 PRO VOG-L29 C431 v10.0.0.190
GDRIVE VOGUE-L29C 10.0.0.190(C431E19R2P5)_Firmware_EMUI10.0.0_05016DYH online
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
When i try volume up + power combo, the huawei logo appears and then nothing. No eRecovery.
When i try volume up + down + power the eRecovery appears, but with no OTG option. Only "Update and recover system" witch enables wifi.

widbjörn said:
When i try volume up + power combo, the huawei logo appears and then nothing. No eRecovery.
When i try volume up + down + power the eRecovery appears, but with no OTG option. Only "Update and recover system" witch enables wifi.
Click to expand...
Click to collapse
You will have to do as i wrote to enter eRecovery on EMUI 10: press POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Sent from my VOG-L29 using Tapatalk

SilviuO said:
You will have to do as i wrote to enter eRecovery on EMUI 10: press POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
I made a video of what happens when i try that. https://www.youtube.com/watch?v=oWuWhPeR91M

widbjörn said:
I made a video of what happens when i try that. https://www.youtube.com/watch?v=oWuWhPeR91M
Click to expand...
Click to collapse
???
That's very strange... When using the EMUI 9.1 method it works?Phone OFF, pressing Volume UP and connect the Power Cable?
Or by connecting the OTG, then simultaneously pressing POWER+VOLUME UP+VOLUME DOWN untill you see the white screen with EMUI recovery?
Sent from my VOG-L29 using Tapatalk

SilviuO said:
Or by connecting the OTG, then simultaneously pressing POWER+VOLUME UP+VOLUME DOWN untill you see the white screen with EMUI recovery?
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
This works, but no OTG option.
https://imgur.com/a/KqEP5CJ

widbjörn said:
This works, but no OTG option.
https://imgur.com/a/KqEP5CJ
Click to expand...
Click to collapse
OK, when pressing Update and recover system, check for Download update and recover. Connect it to Wi-Fi and let it download.
Sent from my VOG-L29 using Tapatalk

SilviuO said:
OK, when pressing Update and recover system, check for Download update and recover. Connect it to Wi-Fi and let it download.
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
I get "Get package info failed"

widbjörn said:
I get "Get package info failed"
Click to expand...
Click to collapse
. You will have to try again as i wrote to enter eRecovery on EMUI 10, it has to work eventually, because it's the only way to make it work again, beside send it to Huawei center. Users who were in you position (had EMUI 9.1 and flashed another cust firmware and got softbricked then flashed again a wrong version of EMUI 10), helped them by providing the right firmware (in your case the one i've shared few posts earlier), then entered eRecovery by the method i've mentioned and then succesfully revived their units (there are a lot of posts in this forum with gratefull users that followed my methods).
So, try again and again (with the OTG connected) to enter eRecovery and at some point, it should work.
Also, try doing a Factory Reset from the menu that appear when doing the 3 buttons method and then try again entering eRecovery, who knows?
press POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Keep me posted ?
Sent from my VOG-L29 using Tapatalk

SilviuO said:
. You will have to try again as i wrote to enter eRecovery on EMUI 10, it has to work eventually, because it's the only way to make it work again, beside send it to Huawei center. Users who were in you position (had EMUI 9.1 and flashed another cust firmware and got softbricked then flashed again a wrong version of EMUI 10), helped them by providing the right firmware (in your case the one i've shared few posts earlier), then entered eRecovery by the method i've mentioned and then succesfully revived their units (there are a lot of posts in this forum with gratefull users that followed my methods).
So, try again and again (with the OTG connected) to enter eRecovery and at some point, it should work.
Also, try doing a Factory Reset from the menu that appear when doing the 3 buttons method and then try again entering eRecovery, who knows?
press POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Keep me posted ?
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
Yeah, I'll keep trying. Thanks anyway for taking the time to help me out, much appreciated! Hopefully I can find a solution for this some day :good:

widbjörn said:
Yeah, I'll keep trying. Thanks anyway for taking the time to help me out, much appreciated! Hopefully I can find a solution for this some day :good:
Click to expand...
Click to collapse
The only free way of reviving your device is by somehow manage to enter eRecovery and using dload firmware (ONLY FOR EMUI 10, using dload firmware from EMUI 9.1 won't help, because your Recovery is from EMUI 10 and downgrade is only possible using Hisuite and a working phone) to revive it.
Other option is to send it to Huawei Service Center, telling them it got softbricked whille updating from EMUI 9.1 to EMUI 10. Maybe it's something else rather a software problem and something on the motherboard (it's strange that using VOLUME + doesn't give you eRecovery).
Let me know how you got it revived :highfive:
Sent from my VOG-L29 using Tapatalk