Hi i'm a noob (ex-apple fanboy) i just got my first android device 2 weeks ago and cuz i wanted to run obb files for games on my external sd i rooted my device.then i flashed xposed to my phone using twrm recovery and installed xposed and the obb to sd module.Finally got it to work after much frustration until something strange happened.I went to sleep with my device at about 50 or 60% battery level and when i woke up my phone was dead.I was shocked.anyways luckily i did a backup before flashing xposed and am now currently restoring the backup.Cn xposed be the culprit here? this has never happened until i flashed xposed.I also noticed that my battery was really going down fast and when i checked power settings android system was using up 100% battery .Sense home too was using up a lot and ive never seen this happen before until now.Please advice me.I use an unlocked HTC One M8 with a Stock rom and TWRM recovery on lollipop 5.0.1
Which modules do.you have and download a wakelock detector to see what's keeping your phone awake
Lol
nemofbaby2010 said:
Which modules do.you have and download a wakelock detector to see what's keeping your phone awake
Click to expand...
Click to collapse
i i only had single module installed.the obb on sd module.anyways i did a restore from my NANDroid backup and my phone is back to normal .lost about 3% overnight.Is there an issue with xposed on lollipop 5.0.1 or the module itself.cuz i deactivated the module and rebooted but my phone was still draining quivkly until i decided to restore.now I dont have xposed on my phone anymore .
i really have to try almost all Module (whose work on my device) but nothing about Battery Drain.....
Hesham Sleem said:
i really have to try almost all Module (whose work on my device) but nothing about Battery Drain.....
Click to expand...
Click to collapse
i'll try to flash xposed to my phone again and not install the obb on sd module maybe its the culprit.i wish someone would advise me tho
There shouldn't be any batt drain due to Xposed. DO CLEANUP and CLEAR your Download/Photos/Pictures folder.. Any sideloaded apk from 3rd websites do WAKE Play services + Play store and they'll start upload the apk for verification without your knowledge..
remiavan said:
Hi i'm a noob (ex-apple fanboy) i just got my first android device 2 weeks ago and cuz i wanted to run obb files for games on my external sd i rooted my device.then i flashed xposed to my phone using twrm recovery and installed xposed and the obb to sd module.Finally got it to work after much frustration until something strange happened.I went to sleep with my device at about 50 or 60% battery level and when i woke up my phone was dead.I was shocked.anyways luckily i did a backup before flashing xposed and am now currently restoring the backup.Cn xposed be the culprit here? this has never happened until i flashed xposed.I also noticed that my battery was really going down fast and when i checked power settings android system was using up 100% battery .Sense home too was using up a lot and ive never seen this happen before until now.Please advice me.I use an unlocked HTC One M8 with a Stock rom and TWRM recovery on lollipop 5.0.1
Click to expand...
Click to collapse
Hey man, I've battery drain too.. I've got LG G3.. And I've only one module installed (lte/4G switch.. Very easy!!)
Imho is because is an alpha version..
So I'm in a bad place right now it seems. I just rooted my S6 with PingPong root and everything went great. Proceeded to install AdAway and get that started. Then I moved to some build.prop tweaks. I added in the RAM tweaks from the thread in General and I also edited product.name to "att" to remove the S Finder and Quick Connect lines under the brightness sliders. When I rebooted my phone, I got the problems described in the title.
The lock screen just shows a black wallpaper and the rest of the normal options on the lock screen. I'm able to unlock my phone, but then all I see is my actual wallpaper over everything. I can bring the notification shade down and use the toggles, but if I try to open an app all I see is the wallpaper. I know the app is running because when I tried the phone dialer, I was able to place a call. So everything is running, but I can't see any of them because my wallpaper is stuck in place over everything.
Obviously my first idea was to fire up adb and push my backup of the build.prop file to /system, but I can't use adb as it says my device is unauthorized...I've enabled USB debugging in the developer options, but I never got the authorization request and it doesn't seem to pop up on my phone. I'm going to try and blindly see if it does pop up. If someone could post a picture of what the pop up looks like, it would be extremely helpful.
Does anyone know how I can unscrew myself here? I don't even know why this happened. My guess is it's the product.name change because no one's reported a problem like this with the RAM tweaks. Also, I've tried booting into Safe Mode and the problem still persists.
Thank you for the help.
Edit: Managed to get authorized and was able to get in through Adb shell. Moved my backup to /system, exited the shell and pulled the file from /system to check it and make sure it was right and now my phone is in a bootloop. What the hell happened? The build.prop is identical to the one I backed up. Why am I getting a bootleg now and what should I do now? I'm guessing I'm pretty screwed.
Edit 2: Flashed stock firmware with ODIN. Back to normal now.
If problem still persist you may have to ODIN. FYI in 5.1.1 you are able to remove sfinder and quick connect
Sent from my SM-G920T using XDA Free mobile app
neno2323 said:
If problem still persist you may have to ODIN. FYI in 5.1.1 you are able to remove sfinder and quick connect
Sent from my SM-G920T using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I'm downloading the stock firmware now and planning on flashing through ODIN. I'm reluctant to update to 5.1.1 due to the comments about worse battery drain and no real fix to the multitasking. Figured I would root and try the changes people have been reporting successfully.
I've never owned an Android Samsung phone before or flashed via ODIN, but I'm guessing it will wipe my phone completely?
Ok sounds good ..
Sent from my SM-G920T using XDA Free mobile app
just curious are you on ozopv2?
Hello. First, want to apolgize about my english.
Second, i grant root for my op3t because i got battery drain and people told me to grant root for having this fix.
After root, i downloaded greenify, app-ops and betteebatterystats, and still, my phone battery draining too fast.
I added some pictures from the bbs today.
In my battery page (in settings) the android system is the biggest eat of battery after the screen. I tried to let the google play service not run in backround and not wake the phone(in app-ops) but still, nothing.
Please, help me to find out what eats my battery, i want to enjoy from my phone.
Well for start, it's right in front of your eyes.
What are the apps having the biggest consumption at your first picture?
Facebook, Messenger and the one with the blue phone icon.
Remove them, replace them or reduce their wakelocks with Amplify.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Well for start, it's right in front of your eyes.
What are the apps having the biggest consumption at your first picture?
Facebook, Messenger and the one with the blue phone icon.
Remove them, replace them or reduce their wakelocks with Amplify.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
Hello. First, i add some photos from tonight from bbs, i lost more than 10% for 7 hours.
Second, i power off facebook and messenger wakelock, this should do the job.
Third, another problem from the night, the wifi turn off by itself when the phone enter to sleep mode. What can i do?
Four, i cant install ampifly without xposed?
First time I see such wakelocks.
Do u have stock OOS Rom?
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
First time I see such wakelocks.
Do u have stock OOS Rom?
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
I got stock rom, i didnt change anything, just root the phone.
maor23 said:
I got stock rom, i didnt change anything, just root the phone.
Click to expand...
Click to collapse
So let's check with Amplify, as I wrote u earlier.
Install it, convert it to system app through Appsystemizer and then run it so it starts collecting the wakelocks.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
So let's check with Amplify, as I wrote u earlier.
Install it, convert it to system app through Appsystemizer and then run it so it starts collecting the wakelocks.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
I downloaded appsystemizer apk from xda, but it dont allow me to switch the ampifly to system.. Maybe because i have supersu and not magisk? Or i do something wrong?
maor23 said:
I downloaded appsystemizer apk from xda, but it dont allow me to switch the ampifly to system.. Maybe because i have supersu and not magisk? Or i do something wrong?
Click to expand...
Click to collapse
Then u have to find another way to convert it to system app.
The method that I told u is through Magisk.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Then u have to find another way to convert it to system app.
The method that I told u is through Magisk.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
ok, i just flashed magisk and downloaded this module.
has saved the ampifly from the appsystemize, but still i cant launch the ampifly....
maor23 said:
ok, i just flashed magisk and downloaded this module.
has saved the ampifly from the appsystemize, but still i cant launch the ampifly....
Click to expand...
Click to collapse
Did you restart the phone?
But it's strange that the app doesn't launch at all.
Did you activate the module of Amplify at Xposed?
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Did you restart the phone?
But it's strange that the app doesn't launch at all.
Did you activate the module of Amplify at Xposed?
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
i dont have xposed... did i need? because i understood that op3t cannot get xposed..
if i can, can you give me the files i need to download? because there is a lot of files, i dont know what i need..
maor23 said:
i dont have xposed... did i need? because i understood that op3t cannot get xposed..
if i can, can you give me the files i need to download? because there is a lot of files, i dont know what i need..
Click to expand...
Click to collapse
Yes u need it.
Download the apk 3.1.2 from here: https://forum.xda-developers.com/showthread.php?p=58828974
Then install framework 88.1 and activate the amplify module there.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Yes u need it.
Download the apk 3.1.2 from here: https://forum.xda-developers.com/showthread.php?p=58828974
Then install framework 88.1 and activate the amplify module there.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
ok, now everything work. im in the ampifly now, what you want me to show you?
RASTAVIPER said:
Yes u need it.
Download the apk 3.1.2 from here: https://forum.xda-developers.com/showthread.php?p=58828974
Then install framework 88.1 and activate the amplify module there.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
Hey, look at these pictures
Whatever is safe to limit, you can start limiting it with 300 or more seconds.
Whatever is unknown needs extra attention as it may creates problems after limiting it.
You could google each description for extra info and then u can decide further.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Whatever is safe to limit, you can start limiting it with 300 or more seconds.
Whatever is unknown needs extra attention as it may creates problems after limiting it.
You could google each description for extra info and then u can decide further.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
I got too many unknown wakelocks... And Google dont give me the amswer about them. What can i do?
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Bassem AbdullMonem said:
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Click to expand...
Click to collapse
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
bogarty said:
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Bassem AbdullMonem said:
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Click to expand...
Click to collapse
Truthfully, your best bet while you have your device up and running is to backup all your apps and data with something like Titanium Backup or even sync them with the Samsung Cloud. The cloud reinstalls everything and sets your device configuration back to the way it was. Then, if you have a custom rom installed, wipe it in TWRP and reinstall it. If you're running stock, then don't wipe. Just go to the Sammobile website, download the latest firmware for your specific device and reflash it to the device with Odin. This generally fixes all system problems with a device, while preserving your app data.
Alternately, you can also try searching XDA for kernels that are made for your device that have a higher performance and try installing one of those to see if anything improves. As far as the screen going off early too, you can always check in "Settings/Display/Screen Timeout" to see what it's set for and change it to the max screen on time. It really sounds like you may have broke something system wise with Xposed or an Xposed module though, which is very easy to do, so I would really recommend starting over fresh. If you're on stock especially, as you really have nothing(data wise) to lose.
Sent from my SM-N920T using Tapatalk
Not sure what's going on here. I rooted exactly per the guide last week but I have noticed sometimes when I go to use Android pay it won't work. When I go to magisk manager it's not installed. I have flashed it again several times but it will randomly uninstall.
I tried the patch that had something to do with file access but it's still the same.
Is there a fix for this?
Thanks.
Does no-one have an answer to this?
If Magisk just isn't going to work I would rather know about it rather than it just not being installed randomly.
Thanks!
I actually having a similar problem...
Are you in the beta channel? Might want to try switching back to stable
I've just switched back now. Let's see how it goes!