Related
Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared
Please Help!
- UPDATE: SOLVED!
Hi there, I'm having the same problem on my I9000B. Please help me.
This is my story, I had upgraded my 2.1 firmware to VIVO's 2.2 Froyo via KIES with the Kies Registry Patcher (used ZVV). Everything worked perfectly, but I wanted to root my I9000B so I made the terrible mistake of using CF-Root via Odin, (http://forum.xda-developers.com/showthread.php?t=788108) following the exact instructions. The kernel replacement (zImage file) was for the I9000 so I had the touchscreen problems. When the phone booted showed Samsung galaxy S GT-I9000B and then inmeadeatly the "B" dissapeared.
Because of my n000bness I tried to use the zImage file from this ROM (VIVO's) (http://forum.xda-developers.com/showthread.php?t=858483), by downloading my own .tar created file (with 7-zip) of the zImage file. Here is were things went down. I got the android - USB cable boot icon. I could not go into recovery mode but I could do download mode, so I re-flashed VIVO's ROM (the one published here) with Odin:
I used the 803 .pit file, Odin 1.3
I did not check re-partition
I selected the ROM as the PDA file and I left PHONE and CSC blank.
the ROM was downloaded to the phone and Odin did not gave me problems.
My problem here is that I get the black screen with vibrations from time to time on boot. This is exactly what happens:
The phone starts showing "Samsung galaxy S.... GT I9000B (at least shows "B")
I can get into recovery mode but the following appears:
Code:
update media, please wait
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please us UI menu for format and reboot actions.
copy default media content failed.
Then I did a factory reset, succesfully completed, tried again flashing the ROM but with Re-partition box checked (as instructed here: http://forum.xda-developers.com/showthread.php?t=723596) but the same stuff happens.
Please tell me what to do! I know it was a stupid mistake trying to fix ony the zImage file, and stupider was using CF-Root on my non-compatible device.
PS: I can get into download mode with no problems
Code:
pda i9000bvjjpa
phone i9000bvjjpa
csc i9000bzwjp3
I have exactly the same problem
but i can go into recovery mode and download mode.
the galaxy screen is I9000 and my sgs is I9000B
any ideas?
A friend of mine has the same issue on his SGS. Both recovery and download mode working.
Have you done JUST like this:
Figueiredo81 said:
Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared
Click to expand...
Click to collapse
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.
Thanks!!
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Margaliini said:
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.
Click to expand...
Click to collapse
Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.
Please, post the link or give me directions for the Claro's ROM. I am having the same problem here.
Thanks.
gtg2 said:
Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.
Click to expand...
Click to collapse
worked here
thanks
thanks for the help i love you no homo !
Un Loko said:
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Click to expand...
Click to collapse
JM2 with pit method is perfect. my "E: can't mount /dev/block/mmcblk0p1" problem has finally been solved.
Thanks
This worked for me.
http://samsunggalaxysforums.com/sho...CIAL-STOCK-FROYO-2.2.1-IS-OUT!!!!-(i9000XXJPU)
???I bought my Phone from CSpire but stuck on At&t Logo???
Samsung Galaxy s Showcase stuck on the At&t Logo...Will not let me go into Download mode??? Help please?
Hello,
I got my SGS a couple of weeks now and I rooted it and put Dl mode, recovery mode and Darky's ROM v9.2 on it.
Now, a couple of weeks later i try to unlock my phone but the touchscreen doesn't respond. Powering off didn't work either so i pulled the battery and tried to boot up again but it doesn't go further then the Galaxy S GT-I9000 screen.
I can't get into recovery mode but I can still get into download mode...
I tried to repair trough odin but I'm not even so sure I'm doing that right (kinda an android noob still). (I used I9000XXJPO.rar and s1_odin_20100803.pit)
Anyone know how to get me out of this situation ?
Any help is wildly apreciated,
thanx
Join the club, I've done everything these pages have said to do re: rooting and installing new ROMs, put Darky's 9.2 on with the latest SpeedMod, all running well except for mobile internet (not wi-fi) being very slow. I found an app on Market for keeping an eye on battery stats, installed it, and within the space of four hours I went from 100% battery to dead, the device got extremely hot, and now it won't start in any way shape or form. Just put a brand new battery in it, tried to go again, but it charged for about 20 mins and got very hot while charging. Now I'm back to square one, no way of turning the device on at all, and going out of my mind cos I can't find the original Virgin Mobile Australia ROM and the stock kernel so I can unroot it for warranty.
Going nuts here.....
I seem to be able to install to the phone in download mode just fine so I'm not completely giving up...
Just hope someone will know how to solve it rather then sending it to Samsung for repair.
Same thing happened to me.
My phone is froyo.ugjl2 (bell phone)
I was following the video for Darky's 9.2
I tried using with and without s1_odin_20100512.pit
used CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar
I tried others but I always get the same result. Odin says it passed, it shuts down and doesn't reboot. I can get back to download but no further.
HHHHHHHHHHHHEEEEEEEEEEEEELP!
try this http://forum.xda-developers.com/showthread.php?t=957868
Doesn't work. I only get the download screen, not the recovery.
I tried the other PIT files.
I tried with the repartition as well. Took longer but still didn't reboot.
cereberus99 said:
Doesn't work. I only get the download screen, not the recovery.
I tried the other PIT files.
I tried with the repartition as well. Took longer but still didn't reboot.
Click to expand...
Click to collapse
That's the screen you need. DOWNLOAD enables you to flash new firmware or kernels.
ok... this is what I am doing, tell me if I'm doing anything wrong or am missing any steps:
I put the phone in download mode
I open ODIN and choose a PIT file and PDA
I check repartition
I plug the phone in and start it.
It goes through and passes. turns off the device and then nothing.
in order to get it back to the download, I need to unplug the USB. I can do nothing else with it except go to the download screen.
Thats right, but does odin regonise ur phone? When you put it in download does a yellow com:id pop up in odin. If not then you need the galaxy s drivers
Sent from my GT-I9000 using XDA App
Tht good try filmware with ordin 512.csc
Code and pda file try m5 filmware or older filmware .yr phone will work fine .some filmware witj ordin show error or up will struck at samsung logo.pm me if up cant solve prob.
Sent from my GT-I9000 using XDA App
it does recognize it before it goes through the process.
here's a paste of the log:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> zImage
<ID:0/007> Removed!!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
then the phone turns off, ODIN shows a pass and the ID COM is no longer yellow.
No kies running in the background? Hmmmm. And phone doesnt start up after that either. Well the other solution is jm8 firmware instead of.jpu.
Sent from my GT-I9000 using XDA App
I get the same thing done as cereberus99 but my phone does reboot, then hangs again at the same samsung screen.
I will try to flash other firmwares to it and hope its gonna be successfull, I'll let u know if I get it done
sigh...
OK!
So I got a little further...
I used 512 PIT and Aries_P-SBL.tar.md5 with partition and I got to clockworkmod recovery v2.5.1.0 speedmod ULFK
being that it's 5am here, Im exhausted...
what should be my next step?
Well getting into recovery is good i guess...
Im downloading the same file as u did, will try it at home.
I will also download jpu and jm8 like icejagans said.
Im currently at work so can't try stuff out cuz i left my SGS at home...
Tonight i will be trying to bring my SGS to life again, I will let know if I get something done.
Shouldnt U try to install a ROM at this point ?
Damn a workday is long without ur Android to play with ...
Do you have usb de-bugging mode on!!
Sent from my GT-I9000 using XDA App
I can't get into Recovery, Download or anything, the battery is flat as a tack, and by the blazes of hell isn't the chassis hot! I'm gonna grab yet another brand new battery tomorrow, hopefully it gets the device running for long enough for me to flash a new kernel and ROM into it. All user data is backed up, so I have every intention of wiping it clean on reinvoke...
I've fixed my phone as far as i know .
I flashed it in Odin using I9000XXJPU (from samfirmware.com) without a pid file (like it said on the site).
After that the phone rebooted and it hang on the first samsung screen (like it did before).
I waited a period of time and then held power + vol up + menu to get to recovery and it did. Recovery said something about updating and then screen went black and the phone rebooted again, this time into android .
I lost all my data and stuff but my phone is working again and I'm happy .
Edit: Phone seemed to boot up properly but after a while stopped responding again.
Touch screen didnt respond and after a reboot the phone is in same state again.
WTF...
Hope yall can put this to good use.
Ok, got a little bit further but now encountering another issue:
I tried the following from electroz's post from here
http://forum.xda-developers.com/showthread.php?t=946523&highlight=UGJL2+UGJH2&page=2
download UGJH2 and flash it without "phone bootloader update", without pit and no partition.
then flash UGJL2 with "phone bootloader update", without pit, and no partition.
it did go into the android system recovery 3e
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA
Your storage not prepared yet, please use UI
menu for format and reboot actions.
Copy default media content failed
the problem is, i try to apply the sdcard:update.zip and it's giving me an error:
install from sdcard...
finding update package...
opening update package...
verifying update package...
E:failed to open /mnt/internal_sd/update.zip
(no such file or directory)
E:signature verification failed
Installation aborted
I've tried format internal sd-card and it too is giving me an error as well
e:can't mount /dev/block/stl10
(invalid argument)
e:copy_dbdata_media:can't mount DBDATA:
My computer is not seeing the phone to be able to push the update.zip to the phone
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA
Your storage not prepared yet, please use UI
menu for format and reboot actions.
Copy default media content failed
seems like if i could just push a new update.zip file on the device, I'd be good to go. problem is, my computer does not see the device as a mass storage device.
I will try installing Kies (I thought it was on my computer)
or see if i can do it with ADB (once I learn all the intricacies)
any suggestions?
I believe your phone has officially been bricked.
I am sorry to be the one to break the bad news to you. My first Galaxy S died of this disease; I tried very hard to revive it whilst it was in coma, however I did not prevail.
Purchased two Bell Canada Samsung Galaxy S as-is from local kijiji.
They all performing the same thing, rebooting at Galaxy S logo, GT-I9000M page, it won't go any further. and there is no recovery mode at start-up.
Here are the steps which I have played with for past two days.
1. Trying to get to recovery mode
- tried ADB, but it doesn't work, since "USB debug" is not on, and it won't accept as a device, and I am not able to turn that on, since I can't even get on the main screen.
- tried three key combo, vol up + home + power on, at least a hundred times for past two days, it doesn't work. fortunately download mode is working (at least I have more option to try). and I know how to get to recovery mode, I played with my friend's before.
2. Trying to use ODIN to flash the firmware
- unchecked "re-partition", unchecked "bootloader", pick 512 as PIT and then choose following as PDA
JH2, JK3, JK4, JL2
always successful on refresh, but phone still does the same, stuck at LOGO page
- also tried, checked "re-partition", and checked "bootloader", pick 512 as PIT and repacking following into PDA, Phone/Modem, CSC, still won't work...
JP series, JH, JK series, JL
At the beginning I though it was problem on CSC, I didn't use correct one to match my phone model #, but what's mine??? I can't go into my phone to check. I checked my friend's I9000, he used I9000BMCJK4, and I assume all JK series should work with me, since our IMEI are similar. And I tried many times on different cache.rft as CSC.tar, still no luck for me
I go crazy now, $400 USD gone. Seriously needing help. Any help is highly appreciated.
try the one jl2 download file and samsungfirmwares.com it flashes a special bootloader that may fix things.. it should be a single file you put in as pda nothing else..
if not they may have permantely trashed internal memory and you are sol.
lgkahn said:
try the one jl2 download file and samsungfirmwares.com it flashes a special bootloader that may fix things.. it should be a single file you put in as pda nothing else..
if not they may have permantely trashed internal memory and you are sol.
Click to expand...
Click to collapse
I have tried one of JL2 file from somewhere (don't remember where), but I will get one JL2 file from samsungfirmwares.com again, see if that works.
Do you mean, only choose the file for PDA, left PIT empty, and get everything uncheck?
permantely trashed internal memory? are these the common problem with this model? I got two of these, and both of them have the same issue, I think, there should be a way to slove it, right? Should I give up these thoughts???
anyways, thanks anyways, I will report back after I flesh JL2 from samsungfirmwares.com
Ok, you need to flash jl2 with pda, repartition, pit file and the secondary boot loader... The SBL(secondary boot loader) is what will actually fix your phone
Hopefully it will work.
Sent from my GT-I9000m using XDA App
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.rfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> factoryfs.rfs
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Still no luck on this firmware, I9000UGJL2, by the way, should be samfirmware.com instead of samsungfirmwares.com
above message I got from ODIN3 v1.30, it looks fine for refresh, but it doesn't work. the phone keep rebooting, it won't pass LOGO page, again, only download mode I can use.
HELP! HELP! HELP!
any leads???
is "<ID:0/005> Sbl.bin" secondary boot loader???
I got the file for PDA, I9000UGJL2, is this the one? if not, where should I get it? how do I update it?
I did it again, with "re-partition" checked, PIT choosed as s1_odin_20100512.pit, I9000UGJL2_homebinary_add_param.tar (which I just downloaded from samfirmware.com), it still doesn't work.
anything else I can try? maybe something simple I didn't do???
I too am a bell user I had the same problem a few weeks back. This is going to sound messed up, but i'm going to do my best to explain how I solved the problem.
DO NOT MULTI-TASK ON THE COMPUTER WHILE DOING THIS. CLOSE ALL OTHER APPLICATIONS.
-remove external sd and sim card
-go into download mode (hold vol down+power+home).
-turn on ODIN
-plug in usb (both computer and phone)
-check re-partition
-ONLY use the 512 pit file. DO NOT use a rom.
-start ODIN and it should only take a minute. this will wipe your device completely but still allow you to access download mode.
- remove usb close ODIN
- start up ODIN again and connect usb
- use 512 pit and JP1 or JP2 rom.
- After flashing, this SHOULD give you an error and send you straight into recovery mode. you're looking for a specific error code. you need the error to have "sl01" or "sl10" (whichever, i forgot which it was) at the end of the path. if the end of the path has "m(something)" then use a different rom till you get the "sl10".
these errors are internal sd errors which your phone is experiencing right now, but the phone is fixable from the "sl10" error.
continuing...
- once you get the "sl10" error, close ODIN, unplug USB, turn off phone.
- go back into download mode.
- boot up ODIN with 512 pit and ULG2 rom.
- plug in phone
- start flashing.
this can give you two outcomes:
1) fixed galaxy S
2) error code with "m(something)" at the end of the error path.
if it's #2 do this all over again until it works.
This took me 3 days to figure out these steps, 10 hours each day. although it doesnt seem to make sense, my phone is working right now and it is where I am writing all this from. My only explanation is that Bell gets ****ty product from samsung. it's almost impossible to flash custom roms on a bell galaxy i9000 because the internal SD seems to have trouble being mounted.
i hope this helps and i hope it doesnt take long for you to fix this problem.
btw, if it does get fixed data connection wont be available. to enable it go to your apn settings. create new named "Bell" with apn as "pda.bell.ca" and leave all other options blank. data should be restored after that.
Sent from my GT-I9000M using XDA Premium App
jt_kyle said:
I too am a bell user I had the same problem a few weeks back. This is going to sound messed up, but i'm going to do my best to explain how I solved the problem.
DO NOT MULTI-TASK ON THE COMPUTER WHILE DOING THIS. CLOSE ALL OTHER APPLICATIONS.
-remove external sd and sim card
-go into download mode (hold vol down+power+home).
-turn on ODIN
-plug in usb (both computer and phone)
-check re-partition
-ONLY use the 512 pit file. DO NOT use a rom.
-start ODIN and it should only take a minute. this will wipe your device completely but still allow you to access download mode.
- remove usb close ODIN
- start up ODIN again and connect usb
- use 512 pit and JP1 or JP2 rom.
- After flashing, this SHOULD give you an error and send you straight into recovery mode. you're looking for a specific error code. you need the error to have "sl01" or "sl10" (whichever, i forgot which it was) at the end of the path. if the end of the path has "m(something)" then use a different rom till you get the "sl10".
these errors are internal sd errors which your phone is experiencing right now, but the phone is fixable from the "sl10" error.
continuing...
- once you get the "sl10" error, close ODIN, unplug USB, turn off phone.
- go back into download mode.
- boot up ODIN with 512 pit and ULG2 rom.
- plug in phone
- start flashing.
this can give you two outcomes:
1) fixed galaxy S
2) error code with "m(something)" at the end of the error path.
if it's #2 do this all over again until it works.
This took me 3 days to figure out these steps, 10 hours each day. although it doesnt seem to make sense, my phone is working right now and it is where I am writing all this from. My only explanation is that Bell gets ****ty product from samsung. it's almost impossible to flash custom roms on a bell galaxy i9000 because the internal SD seems to have trouble being mounted.
i hope this helps and i hope it doesnt take long for you to fix this problem.
btw, if it does get fixed data connection wont be available. to enable it go to your apn settings. create new named "Bell" with apn as "pda.bell.ca" and leave all other options blank. data should be restored after that.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
great!!! Another option I can try. Thank you.
I will try it out right after my work. so the idea behind this, is bricking it into recovery mode and S10 error code. and then fresh right back with correct ULG2 (is this correct? frist time heard about this rom)
anyways, I will post back with result.
Where can i find this ULG2 rom?
did it work?
Thananjeyen said:
Where can i find this ULG2 rom?
Click to expand...
Click to collapse
I think jt_kyle meant I9000UGJL2
and you can get them from samfirmware.com
Paallikko said:
did it work?
Click to expand...
Click to collapse
yes, lucky I got one of my Bell Samsung phone work. Since I done a million times of refreshing and rebooting and etc... I am not sure what I did, now I still trying to remember last 10 steps I did to make this work.
But definitely, I could not have done this repair without jt_kyle. Thank you so much, jt_kyle.
jt_kyle, Thank you!!!
but none of JP1 or JP2 is givining me the error "tl10", I tried
I9000DXJP1
I9000TGYZSJP2
I9000XXJP1
I9000XXJP2
it come out error started with "m..."
I just keep refreshing each on PDA 3 to 4 times, and choose with re-partition or without. At the end I try a few another ROMs as well, I still get no "tl10", but somehow, just that magicical moment, the screen come out a set of commands that look like format sd card, so I got excited, fresh it with JL2. It is back to work.
still no clue the steps of fixing the problem.
one done, the another one to go.
any more ideas please, and I think I am really close to solve this one now.
Thank you All
FIX
Look for a file called I9000UGJL2Complete follow the same steps pit and so on after your phone boots up youll have a blank baseband then you get the I9000UGJL2 modem and flash it where it says phone this has unbricked a few for me hope this helps
EVERED78 said:
Look for a file called I9000UGJL2Complete follow the same steps pit and so on after your phone boots up youll have a blank baseband then you get the I9000UGJL2 modem and flash it where it says phone this has unbricked a few for me hope this helps
Click to expand...
Click to collapse
if you have a way for me to give you this file i do have it just not sure how to do so because its 286MB
Could it be dead?
Since you have one of the infamous i9000m's it might also just be a dead SD card? You might try calling samsung and trying to get it repaired under warrenty as they are all under a year old (try and flash jl2 first even it will not boot up). It sounds like no receipt may not be an issue.
Lots of info from allgamer's list of i9000m issues in the general section.
At least you have one in the meantime!
same problem
Hey ive got pretty much the same problem that you had. Only differences are that I'm from Australia and am on Virgin network.
My phone became semi bricked one day when it restarted and since the 3 button combinations did not work i ordered in a USB jig which i received today. I used odin 1.8 to try and flash to I9000BVJJPD which i got from samfirmware.com but it ended up stuck on the logo screen vibrating once in a while. I decided to repeat it with no avail and began to use other roms and use .PIT.
This is where my phone became even worse and is now in it's current position; rebooting at the GT-I9000 page. I tried the method that jt_kyle suggested, substituting australian roms instead but it is still in the same position.
Does anyone have any other suggestions or should i just try getting a warranty?
Look for the ugjl2 complette and repeat what I said
Sent from my GT-I9000 using XDA Premium App
EVERED78 said:
if you have a way for me to give you this file i do have it just not sure how to do so because its 286MB
Click to expand...
Click to collapse
I think I have this I9000M_JL2_JL2_JL2_JL2_UG_BMC file, is the same file that you are talking about? JL2 Complete?
I tried this file many times, it won't work neither.
for past one hour I played around this phone, trying to repeat the steps I did for the first phone. Unfortunately, nothing is working for me AGAIN!
but I got these error page all the time, like following...
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
I think that's bigest problem in my case, and for a lot of people in this forum. Do any people has a good solution for this???
Hi guys,
This is my first post here in the forum, usually i just read other people posts and learn as i go, but this time i already tried everything i can't during 5 days and counting..
I have a CDMA Galaxy Tab from Verizon (sch i800) and wrongly attempted to flash the gt-p1000 gingerbread (2.3.3) version from samfirmware.com with odin to no avail.
Now the tablet screen is always black, no matter what. My pc recognizes the tablet when i connect it and i can even use odin to flash other firmwares, but nothing appears in the screen, not even the samsung logo.
My guess is that, by using the gt-p1000 firmware, odin has repartioned my tablet and altered my boot.bin and sbl.bin with the gt-p1000 version. That's probably why my screen doesn't even turns on.
Does anyone has any clue on how to resolve this (without returning to samsung, of course) ?
Also, can a riff box restore my tablet?
* Good news, i got some progression here.. I reflashed my tablet with odin using the rom "P1000BUJMC" from samfirmware.com, sugested in this thread http://forum.xda-developers.com/showthread.php?t=1146712&page=3 .
Now my tablet screen is working again but get's stuck at the samsung logo. During the flash, odin getz stuck in the file movinand too.
When i enter recovery mode, the tablet gives me this error:
"E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
E:install_application_for_customer:Can't mount DATA:
Anyone knows how to get through this error?
push..
Does anyone know how to solve the error?
Considering I did the same thing, I hope flashing the firmware you linked works
From all the searching I did the error your getting is due to the internal sd card either A Failing or B Corrupt data partition
I had a blk0p1 error that was fixed when I flashed Cyanogen mod to the SCH-I800 but then I got another error and that was blk0p2, so can't win for losing. The only fix I found was to partition your external sd card to be used instead of your internal. There are tutorials around here somewhere../
before writing, I'm so sorry for my pooooor English.
I live in Toronto, Canada. I bought my Galaxy Note(SHV-E160L) from Korea, so change sim card from LG U+ to Rogers.
but when I sleep, Note encounter Unlimited Reboot.
so I try to repair in 3-way.
first, Factory reset. but I could make Download mode only, couldn't make Recovery mode.
so I try Samsung Kies Recovery mode, but Kies show me binery Error.
last, I want to use ODIN, but ODIN show me Error Message, too.
"Complete(write) operation failed"
What this means?
If it can't be repaired, I must send my cell phone to Korea.
I'm very embrassed...
please help me!!
and Merry Christmas for you
Is it sticking on factoryfs.img in ODIN ? this usually means its bricked which kernel where you on when you did the factory reset ?
I had a similar issue last week, stuck in odin, everything failing, I was convinced it was bricked, I manage to repair it by (no joking here) flashing a million wrong things in ODIN.... But DO NOT TRY THIS lol
try to flash a safe kernel through ODIN, and then see if it bring back recovery, then you can wipe and flash a new rom (hopefully)
otherwise there is the pit file method to revive from a brick, which works well, but loses around 3gb of internal sd space
hello
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.
Thanks for your reply
hanzo777 said:
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.
Click to expand...
Click to collapse
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..
Sigea said:
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..
Click to expand...
Click to collapse
Perhaps should follow closely the guide for using odin from Dr ketan should help:
http://forum.xda-developers.com/showthread.php?t=1424997
1. Installation
- Download stock ROM (should start with a GB rom), and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked.
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
----
see how it goes.
Same problem as OP
Hello guys,
unfortunately, I have the same problem with my 32GB SHV-E160L as OP. Little backstory:
I bought the GNote in Korea and brought it back to my country. I successfully rooted it with one of the guides here on XDA (Tegrak kernel, no OC whatsoever). No problems so far, the phone worked for weeks and I was able to do what you can do with rooted phones. One day while surfing the net it just crashed and was stuck in a boot loop. This is where I am now.
I tried:
Go into tegrak recovery. result: It gets stuck on samsung logo, funnily the phone would establish a usb connection if plugged in (as if in download mode)
Reset from Kies. result: After beeing told by Kies to go into download mode, instead of flashing the new software it gives an error message in Korean about missing binaries (see attachment)
Flash from odin. result: the dreaded red box with "fail" appears after the NAND write command
Now, after doing my research here on XDA I found out that my emmc might have damaged partitions and I need a PIT file. Here's where I'm stuck.... I can't find a PIT file for my 32GB note, only for the N7000 or the I717. And I don't want to mess things further up... so if anyone here could provide me with a PIT file, or tell me how to fix the phone through other means I would be really grateful
Thanks in advance....
You should ask hg42 if he can make one - in his thread I read that he did this before even for other devices.
So try a pm or post in his thread. Good luck