Related
Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~
flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.
i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,
i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.
any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks
well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.
I am using a moto Razr car charger and it works fine so far.
Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.
i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.
RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.
Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?
I'm having an issue,and seems not just me,that I can't charge the Tab via usb connected on a laptop or a Mac book (pro).
I'm wondering if its firmware related, I've tried JID and JI6 same issue.
Are you guys having the same?
If someone is not having this problem can please be so nice to tell me the firmware version?
Thanks
no, you cannot charge the tab from a PC usb slot cause of some minimum power requirements which was the same way with ipad
chowdarygm said:
no, you cannot charge the tab from a PC usb slot cause of some minimum power requirements which was the same way with ipad
Click to expand...
Click to collapse
No is not the same than ipad, ipad is possible to recharge with new macs (that what apple says on the web site, the don't say how new though). But is true the iPad has 2A battery versus the Galaxy Tab that has 4000mAh, I was hoping that there was a way to recharge it (slowly but at least to keep it alive when is connect)
zerocool76 said:
No is not the same than ipad, ipad is possible to recharge with new macs (that what apple says on the web site, the don't say how new though). But is true the iPad has 2A battery versus the Galaxy Tab that has 4000mAh, I was hoping that there was a way to recharge it (slowly but at least to keep it alive when is connect)
Click to expand...
Click to collapse
no idea on that. i didn't keep my tab connected so long to pc but whenever i connect it to pc it shows on battery with cross mark on charging symbol. may be will test it this weekend
charging
hi guys,
mine is also showing the non-charging-sign but it charges slowly - get juice plotter and try it your self
Can I recharge the Tab in the car sigarette ligther socket with USB adapter?
Portos61 said:
Can I recharge the Tab in the car sigarette ligther socket with USB adapter?
Click to expand...
Click to collapse
check this out, they have the adaptor for cigarette...
http://www.thinkgalaxytab.com/universal.html
I found the link above on google, but I've seen other around the web.So I think you can
hipath said:
hi guys,
mine is also showing the non-charging-sign but it charges slowly - get juice plotter and try it your self
Click to expand...
Click to collapse
Mine is the same guys... I left my AC charger at work over the weekend and have been charging it via USB the whole time... Slow but it gets there if you leave it on over night!
Mine won't charge unless I use the power adapter from Samsung
Mine does charge but slowly from USB.... you should also know that different PC boards and laptops have different power outputs.... in most cases, your tab should charge very slowly on USB power. Mine charges and has BT and Wifi on also... but with heavy use and plugged in to my laptop, it may offset and drain ever so slightly....
Same thing goes for car chargers... if not rated for higher output, it will charge VERY slowly. The original Samsung car charger has a much higher power output. If you can find one that has the same aftermarket USB car adaptor for Ipad charging, that should work too
eskasi said:
The original Samsung car charger has a much higher power output.
Click to expand...
Click to collapse
Indeed (yet it is very compact and doesn't get hot).
Related discussion here:
http://forum.xda-developers.com/showthread.php?p=9172163#post9172163
I tried my iPad charger - output rating looks to be the same - but it didn't work very well.
brucewilsonpa said:
I tried my iPad charger - output rating looks to be the same - but it didn't work very well.
Click to expand...
Click to collapse
The contacts on mine are upside down compared to an iPad/iPod/iPhone charger. The blade on which the contacts sit is also higher in the charger slot than an iPad charger. How did you get it to fit without breaking something?
Some PC:s (motherboards) have so weak power output via USB, that they just barely provide a mouse and a keyboard but nothing more.
So anyone should not expect it to be enough for charging Tab.
Tab's own power supply gives 2 Amps out!
My experience about car-usb-adapters: one can charge Tab, other quite similar for some reason not. However, both charge Galxy S fine.
Just something to keep in mind as an option... Usb 3.0 will give more juice to usb cables than current usb ports. Apple has "cheated" and already increased the power to the regular usb ports on their newer laptops on par/better with usb 3.. So... If you get usb 3 cards installed you'll have a port with enough amps to charge the tab. Easier/cheaper to just buy a pdmi cable but if you are about to upgrade to usb 3 its more incentive to do so.
Sent from my SCH-I800 using XDA App
Regarding the ipad charging you can use the below link to to download an ASUS program that will boost the USB power for Windows this works for the ipad and it's showing as charging when connected to my PC this may also work for galaxy tab
http dlcdnet.asus.com/pub/ASUS/misc/utils/AiCharger_V10006_XpVistaWin7.zip
Charging using usb on my mbp does take a long time. I timed it and it took at least 6 hours to charge from completely empty to full. Its ok since I plug it in when I'm about to go asleep and by the time I'm up its fully charged.
essahar said:
Regarding the ipad charging you can use the below link to to download an ASUS program that will boost the USB power for Windows this works for the ipad and it's showing as charging when connected to my PC this may also work for galaxy tab
http dlcdnet.asus.com/pub/ASUS/misc/utils/AiCharger_V10006_XpVistaWin7.zip
Click to expand...
Click to collapse
Careful with that.
Seems it has the not-uncommon tendency to screw up USB drivers to the point that mice and keyboards won't work either, especially on Win7 and Vista X64 machines. It got me, had to do a system restore to fix it. Neat idea though.
pdiddypdiddypdiddy said:
Apple has "cheated" and already increased the power to the regular usb ports on their newer laptops on par/better with usb 3.
Click to expand...
Click to collapse
USB port should give at least 500mA. But anything more is OK. So Apple can make their USB ports to give anything over 500mA and it is well within the standard. Actually it is good for everyone because if Apple port can give 2A you can use non powered hubs and have power for lots of USB devices.
Actually the Tab charges fine (albeit slowly) from a USB, you just have to be aware of a few things. Firstly as mentioned above some USB ports provide more power than others. Try the different ports on your machine and you'll soon figure out which ones work best. Secondly, while the Tab will display the "Connect your charger" message, it is actually charging. Go into Settings, About Phone, Status and watch the battery level. It'll take a while but will creep up. Finally, it charges faster when the Tab is switched off. ie: if you're actually using it, you won't get a charge, if you have it in standby with screen off, it'll charge slowly (takes most of a day for a full charge) and if the Tab is switched off, it'll go a lot faster (though still not as fast as with the power adapter.)
This is good to know as you can plug it in to your computer and let it set on your desk at work all day and know that it is slowly trickle charging.
I also found that plugging the USB cable into an Apple adapter (from an iPhone) brought up the same "Connect your charger" message, but did charge the Tab, faster than a USb but not as well as my samsung plug.
I noticed this morning a strange hissing noise which at first I thought was coming from the phone. This was when I was using the phone whilst it was plugged into the mains charger.
I removed the cable and the noise stopped. I plugged the phone into a USB port on my PC and there was no noise this time. So I checked the mains charger that came with the phone and sure enough the noise was coming from there!
It almost sounded like there was a fan inside, a very similar noise.
Has anyone else experienced this or can you recreate this?
It also happens to my charger, you can feel comfortable there are no problems
Sent from my Galaxy Nexus using xda premium
apprentice said:
I noticed this morning a strange hissing noise which at first I thought was coming from the phone. This was when I was using the phone whilst it was plugged into the mains charger.
I removed the cable and the noise stopped. I plugged the phone into a USB port on my PC and there was no noise this time. So I checked the mains charger that came with the phone and sure enough the noise was coming from there!
It almost sounded like there was a fan inside, a very similar noise.
Has anyone else experienced this or can you recreate this?
Click to expand...
Click to collapse
I do not have this charger but from your description it sounds like normal switcher noise.
The charger likely uses a switcher for dc-dc conversion. When not well designed they can have an audible noise. Usually it is not a fault and no reason to worry.
kuikkaj said:
I do not have this charger but from your description it sounds like normal switcher noise.
The charger likely uses a switcher for dc-dc conversion. When not well designed they can have an audible noise. Usually it is not a fault and no reason to worry.
Click to expand...
Click to collapse
Thanks for the info guys
i hoped i finally got rid of that noise with a new phone, but my note 2 charger makes noise too.
just like my LG O2X charger and Galaxy Tab 2 7" charger.
yet all my other chargers are capable of being perfectly silent.
it's loud enough to give me trouble sleeping, and i'm used to sleeping next to a noisy PC.
I don't have a Galaxy Note 2 yet, but my original Galaxy Note's charger makes noise, as well. I believe because it has a high mAH recharging, because I use as an extra charger an old blackberry charger (with a long long cable xD) with only 500 mAH recharging power doesn't make any noise. I don't know if it has anything to do with how much voltage is flying through the charger has anything to do with it, but:
*Samsung chargers make noise.
*Other chargers I have don't.
All the chargers since the SII's have emitted some noise when there is no device plugged in. I don't really mind honestly.
_______________________________________________________________________________________
Check out my huge collection of 64GB Samsung Galaxy Note 2 Videos (Demos, Accessory Reviews)
Using nokia phones since 2002 i have to say most of them make that sound, dont worry
I got my SGNII at the weekend, and I have a very noisy charger, to the point where, as it is close to my bed, it wakes me up when its finished charging. However its only noisy once the phone is fully charged. Unplugging the phone once charged means the noise stops, but it also means my phone has been running on battery for 6 hours before I get up.
I think I will switch to a different USB charger that doesn't sound like a mouse being tortured
No Problem
Never faced this issue ever. Maybe faulty chargers i guess
Went to a music festival over the weekend and used a portable charger to charge my phone, this is the last time I remember my phone fully charging. Once it died and I got back home, my phone would occasionally say USB connected and not charge until it said USB disconnected. Now it doesn't say that anymore but it charges ridiculously slow...
-Overnight charging I got 40%
-Left my phone for 3 hours and got 11%
-Use my phone while it's plugging into the charger and the battery still lowers rather than charging.
I've tried putting it in Ultra power saving mode and charging it while it's off but there is no big difference, I'm mad cause this cable is supposed to be charging it super fast.. Writing this post while my phone is plugged in I've already lost 2%
Nothing is wrong with my cord or the plug I am using, it's all the same stuff I have been using before. Could there be a problem with the port or something? Helppp
My phone is also in great condition always had a case, and just got it this past April
*also my phone is rooted so I don't think I can use the warranty
viewsonic11 said:
Nothing is wrong with my cord or the plug I am using, it's all the same stuff I have been using before. Could there be a problem with the port or something? Helppp
*also my phone is rooted so I don't think I can use the warranty
Click to expand...
Click to collapse
Are you sure? Cords die easily. Can you confirm how many amps the cord and the plug are allowing to be pulled? I've seen different phones pull different amps from different cords and plugs.
You can un-root and get back to a clean phone if you want to take it back.
AnarchoXen said:
Are you sure? Cords die easily. Can you confirm how many amps the cord and the plug are allowing to be pulled? I've seen different phones pull different amps from different cords and plugs.
You can un-root and get back to a clean phone if you want to take it back.
Click to expand...
Click to collapse
How can I confirm the amps? And all I know is I've never had a problem with the chord before and I've even tried regular microusb cables that do the same thing
viewsonic11 said:
Went to a music festival over the weekend and used a portable charger to charge my phone, this is the last time I remember my phone fully charging. Once it died and I got back home, my phone would occasionally say USB connected and not charge until it said USB disconnected. Now it doesn't say that anymore but it charges ridiculously slow...
-Overnight charging I got 40%
-Left my phone for 3 hours and got 11%
-Use my phone while it's plugging into the charger and the battery still lowers rather than charging.
I've tried putting it in Ultra power saving mode and charging it while it's off but there is no big difference, I'm mad cause this cable is supposed to be charging it super fast.. Writing this post while my phone is plugged in I've already lost 2%
Nothing is wrong with my cord or the plug I am using, it's all the same stuff I have been using before. Could there be a problem with the port or something? Helppp
My phone is also in great condition always had a case, and just got it this past April
*also my phone is rooted so I don't think I can use the warranty
Click to expand...
Click to collapse
*#0228# this will show ur battery stats. Post that info. Also the is a option to reset your fuel gauge stats but I do believe you need to be fully charged for this.
The Gods Approve This Post, From The Ghost Of Sparta's S5 active.
viewsonic11 said:
How can I confirm the amps? And all I know is I've never had a problem with the chord before and I've even tried regular microusb cables that do the same thing
Click to expand...
Click to collapse
If you have tried other cables and get the same result, you may have a problem. However I have seen cords got from .44a to over 1.2a from two different phones though.
I use these to test: AboveTEK® USB Power Meter Voltage Tester Current Monitor
viewsonic11 said:
How can I confirm the amps? And all I know is I've never had a problem with the chord before and I've even tried regular microusb cables that do the same thing
Click to expand...
Click to collapse
check the power brick your using, if its the Samsung one that came with the phone it should be like 2 amps if I remember. id suggest using another power brick to test. also if you have a usb 3 super speed port on a pc or laptop sometimes you can use device manager in windows (start menu, right click computer, manage, in the window that opens click device manager, expand the universal serial bus controllers heading, check though any devices that say hub and go to their power tab) to see how many amps something is pulling from a pc usb. the other option is that you might have a defective battery but I don't know for sure. these are just some ideas that may or may not work for you.
viewsonic11 said:
Went to a music festival over the weekend and used a portable charger to charge my phone, this is the last time I remember my phone fully charging. Once it died and I got back home, my phone would occasionally say USB connected and not charge until it said USB disconnected. Now it doesn't say that anymore but it charges ridiculously slow...
-Overnight charging I got 40%
-Left my phone for 3 hours and got 11%
-Use my phone while it's plugging into the charger and the battery still lowers rather than charging.
I've tried putting it in Ultra power saving mode and charging it while it's off but there is no big difference, I'm mad cause this cable is supposed to be charging it super fast.. Writing this post while my phone is plugged in I've already lost 2%
Nothing is wrong with my cord or the plug I am using, it's all the same stuff I have been using before. Could there be a problem with the port or something? Helppp
My phone is also in great condition always had a case, and just got it this past April
*also my phone is rooted so I don't think I can use the warranty
Click to expand...
Click to collapse
Sounds like the portable charger might have been able to adjust amperage or voltage. If that's the case the portable charger could have damaged your battery if it was wrong amp and too high of amps. I have a portable charger that even changes voltage that could ruin a device too if not on 5 volts.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
It sounds like it could be a battery problem. More likely, it could be a problem with the software. I would back everything up and flash another ROM or bring it back to full stock.
Option 1:
Install this app https://play.google.com/store/apps/details?id=ccc71.bmw
It will tell you batter voltage and charging current.
Options 2:
Charge with phone powered off.
Thank you everyone for the replies, my phones been getting worse to the point where it sometimes wont charge.
I think what im going to do is flash back to stock and bring it in to samsung or something , but also i heard a rumor that towelroot doesnt void the knox warranty? if this is true i may just bring it in as is...only becuase when i connect my phone my laptop wont read it anymore either, i havent tried if odin will but im assuming it would, i just dont want my phone to end up bricking because of the bad connection
This sounds like an old problem with Samsung phones, including the Galaxy S series. My original Galaxy S did this, my S3 did this, my sister's S3 did this. On those phones it was the charging port that caused the problem. My sister had her port replaced and her phone is working fine again.
Although I don't know for sure if that's your problem, that would be my first guess.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Opie Knievel said:
This sounds like an old problem with Samsung phones, including the Galaxy S series. My original Galaxy S did this, my S3 did this, my sister's S3 did this. On those phones it was the charging port that caused the problem. My sister had her port replaced and her phone is working fine again.
Although I don't know for sure if that's your problem, that would be my first guess.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I'm pretty sure it has to do with the charging port, my battery is fine and so are my cables, and it randomly keeps saying USB connected/disconnected and won't change when it's "connected"
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
heya,
anyone has experienced this issue ? the device (s6, but i tried also with an s7) is charging correctly using the passthrough port of the gear-vr while using the gearvr/oculus software. but, switching to cardboard mode using any of the different cardboard-enabler apps (i tried almost all), the device doesnt charge anymore when plugged to power via the gear-vr passthrough. i bought a cheap vr headset to overcome this, since i mostly use cardboard stuff, but the quality is nowhere near the gear-vr.
any tip ?
the port has a mind of its own really and oculus persist to keep silent about it , for some it doesnt even charge at all even with the gear vr service running , some came to think it was for otg only but it didn't work , some came to think its for data transfer but it is unrecognized when connected , so you are lucky it gets to charge for you in one state .. cheers
valerino said:
heya,
anyone has experienced this issue ? the device (s6, but i tried also with an s7) is charging correctly using the passthrough port of the gear-vr while using the gearvr/oculus software. but, switching to cardboard mode using any of the different cardboard-enabler apps (i tried almost all), the device doesnt charge anymore when plugged to power via the gear-vr passthrough. i bought a cheap vr headset to overcome this, since i mostly use cardboard stuff, but the quality is nowhere near the gear-vr.
any tip ?
Click to expand...
Click to collapse
In addition to what night-mayor said when you use gear vr mode the charge port is only supported by actual Samsung fast charge capable charger that came with the S6 and similarly compatible phones.
night-mayor said:
the port has a mind of its own really and oculus persist to keep silent about it , for some it doesnt even charge at all even with the gear vr service running , some came to think it was for otg only but it didn't work , some came to think its for data transfer but it is unrecognized when connected , so you are lucky it gets to charge for you in one state .. cheers
Click to expand...
Click to collapse
Sent from my SM-G920W8 using XDA-Developers mobile app
developweb said:
In addition to what night-mayor said when you use gear vr mode the charge port is only supported by actual Samsung fast charge capable charger that came with the S6 and similarly compatible phones.
Click to expand...
Click to collapse
funny i use the original samsung fast charger and it still wont charge for me , if it does for you then most probably they started adopting identity chips in chargers like apple . but did you see it work for yourself ?
I have the original Samsung S7 fast charge charger and cable and it refuses to charge whilst using VR meaning I have to stop when the battery is low every time. This is ridiculous although probably better for my eyes lol
I am going to try the cable in the GVR box and see if that works instead.