SThermal Tweak
Warning:When you use this mod. make sure to keep an eye on the temperature ... If the temp goes above 46 degree C or above then return back to stock thermal... Hight temperature for long period of time may harm your device, So use this when you actually in need of this. Also DO NOT use this when you use qc3 fastcharge adapter.
Features:
No Qcom External Fastcharge Adapter needed
Short Period Full charge
Efficient Heating (Not that much)
Issues:
- do post here about any issues
ps: this will not increase current flow ... (you can see in Ampere App) but still charges fast
Download
Santoni
(stock thermal is present there too)
How to:
Download Zip
Flash Through TWRP
Reboot
After Rebooting, Do reboot once again
Thats it
Swapnil Soni said:
SThermal Tweak
Warning:
When you use this mod. make sure to keep an eye on the temperature ... If the temp goes above 46 degree C or above then return back to stock thermal... Hight temperature for long period of time may harm your device, So use this when you actually in need of this. Also DO NOT use this when you use qc3 fastcharge adapter.
Features:
No Qcom External Fastcharge Adapter needed
Short Period Full charge
Efficient Heating (Not that much)
Issues:
- do post here about any issues
ps: this will not increase current flow ... (you can see in Ampere App) but still charges fast
Download
Santoni
(stock thermal is present there too)
How to:
Download Zip
Flash Through TWRP
Reboot
After Rebooting, Do reboot once again
Thats it
Click to expand...
Click to collapse
Great bro:fingers-crossed:
Thanks for sharing,let's hope for good.??
Swapnil Soni said:
SThermal Tweak
Warning:When you use this mod. make sure to keep an eye on the temperature ... If the temp goes above 46 degree C or above then return back to stock thermal... Hight temperature for long period of time may harm your device, So use this when you actually in need of this. Also DO NOT use this when you use qc3 fastcharge adapter.
Features:
No Qcom External Fastcharge Adapter needed
Short Period Full charge
Efficient Heating (Not that much)
Issues:
- do post here about any issues
ps: this will not increase current flow ... (you can see in Ampere App) but still charges fast
Download
Santoni
(stock thermal is present there too)
How to:
Download Zip
Flash Through TWRP
Reboot
After Rebooting, Do reboot once again
Thats it
Click to expand...
Click to collapse
And what exactly does this mod do? Just curious.
raza_maestro said:
And what exactly does this mod do? Just curious.
Click to expand...
Click to collapse
speeds up charging by overloading thermal threshold
Swapnil Soni said:
speeds up charging by overloading thermal threshold
Click to expand...
Click to collapse
Okay.
Redmi 4 santoni custom rom support this flash file or stock only support?
I m using this for a week, temp is now controlled to less than 43, charges fast.
psoneseven said:
I m using this for a week, temp is now controlled to less than 43, charges fast.
Click to expand...
Click to collapse
So how fast exactly it charges the phone?
raza_maestro said:
So how fast exactly it charges the phone?
Click to expand...
Click to collapse
2.5 +- 0.2 hours max
psoneseven said:
2.5 +- 0.2 hours max
Click to expand...
Click to collapse
Well thats something.
I assume its completely fine to use it.
raza_maestro said:
Well thats something.
I assume its completely fine to use it.
Click to expand...
Click to collapse
You can try.
I hope it doesn't take a toll on battery in long run.
Ps: it works on custom roms too right?
Is it work for custom ROM?
For example: RR Remix and AOSP
pupun47 said:
Is it work for custom ROM?
For example: RR Remix and AOSP
Click to expand...
Click to collapse
Yes
raza_maestro said:
I hope it doesn't take a toll on battery in long run.
Ps: it works on custom roms too right?
Click to expand...
Click to collapse
yea it works on all roms
raza_maestro said:
Well thats something.
I assume its completely fine to use it.
Click to expand...
Click to collapse
yea its fine.. if u feel temperature is not that much high then you can use all time.
raza_maestro said:
I hope it doesn't take a toll on battery in long run.
Ps: it works on custom roms too right?
Click to expand...
Click to collapse
well after long term of use like 2 or more years .. then u can see difference tho
Swapnil Soni said:
well after long term of use like 2 or more .. then u can see difference tho
Click to expand...
Click to collapse
Well it took me little more than 3hrs to charge the phone completely with this mod.
raza_maestro said:
Well it took me little more than 3hrs to charge the phone completely with this mod.
Click to expand...
Click to collapse
you followed proper instructions?
Related
Hi all !
Is someone know if a gingerbread's kernel is compatible with fastCharge ?
Ics is fun, but battery is a bit just, and I prefer a 100% functionnal rom.
So I search for a kernel with fastcharge on GB...
Thank's !
and sorry for my english ;-)
i dont think there is
I would prefer normal charge.
It is safe to assume that fast charge doesn't charge the battery properly
kakobubu said:
Hi all !
Is someone know if a gingerbread's kernel is compatible with fastCharge ?
Ics is fun, but battery is a bit just, and I prefer a 100% functionnal rom.
So I search for a kernel with fastcharge on GB...
Thank's !
and sorry for my english ;-)
Click to expand...
Click to collapse
Try Galaxian kernel .
Achal1012 said:
Try Galaxian kernel .
Click to expand...
Click to collapse
Unfornately no Galaxian for JW4...I want fast charge enable, in order that in car when I use my SGS as GPS battery don't drop down.
kakobubu said:
Unfornately no Galaxian for JW4...I want fast charge enable, in order that in car when I use my SGS as GPS battery don't drop down.
Click to expand...
Click to collapse
I think JVU kernel will work fine.
But I am not 100% sure.
Hope any developer can answer it!
MrAndroid12 said:
I would prefer normal charge.
It is safe to assume that fast charge doesn't charge the battery properly
Click to expand...
Click to collapse
Fast charge does charge the battery properly, fast charge is only usable when you have you phone connected to a external power source other than the main. For example you are connected to a PC but you only want to charge your phone. Fast charge foes exactly that, it turns off data transfer and allows more power to be put into the phone hence the name "fast charge". Fast does now work with the mains and does not charge faster than the mains. Hope this gave a better understanding
Sent by Santa Clause
Achal1012 said:
I think JVU kernel will work fine.
But I am not 100% sure.
Hope any developer can answer it!
Click to expand...
Click to collapse
I have not yet seen a GB kernel that properly offers fast charge, why not upgrade to ICS, they may be ports but ICS is very stable and usable on a daily basis
Sent by Santa Clause
i little speak english. but try
my note is hot - about 50C
why?
every rom, now i have SS and is better, but use my phone about 15 mins, doing hot
gruniu78 said:
i little speak english. but try
my note is hot - about 50C
why?
every rom, now i have SS and is better, but use my phone about 15 mins, doing hot
Click to expand...
Click to collapse
What is SS? And Do you have Google+?
Jackwu696 said:
What is SS? And Do you have Google+?
Click to expand...
Click to collapse
May be slim saber
nokiamodeln91 said:
May be slim saber
Click to expand...
Click to collapse
LoL, I thought he was saying Screen Shot
nokiamodeln91 said:
May be slim saber
Click to expand...
Click to collapse
SS - slimsaber
Jackwu696 said:
LoL, I thought he was saying Screen Shot
Click to expand...
Click to collapse
-----------------------------------------------
i don't have google+
gruniu78 said:
SS - slimsaber
-----------------------------------------------
i don't have google+
Click to expand...
Click to collapse
Try looking at your battery statistics. Whatever is heating your phone is using a lot of battery to do that.
all my apk i have install other my devices: dell venue 8, htc desire, samsung i8150
they is not hot - with charge i using max. 28C
battery stats shows nothing wonder
it is not the fault of the battery
hot feel in around camera - maybe procesor
What are you doing with the note when it gets hot.
restart i cools
i had CM11 and battery doctor show 2x1400 Mhz all time
battery widget show about 48-50C
now i have slimsaber and i install new kernel
battery widget show 26C w standby, but use (play games, internet) and charging about 40C
problem may other users with polnish forum
http://forum.xda-developers.com/showthread.php?t=2524891&page=198
post 1971 and 1974
Sorry, but this phone will heat up when you use it. This all sounds normal.
To prevent that you could underclock or undervolt it.
slowdown processor - less warming
but is not solution problem
gruniu78 said:
slowdown processor - less warming
but is not solution problem
Click to expand...
Click to collapse
Well, its not a solution because there is no problem.
These phones are going to get hot when used to game. By design. No way around it. Unless you start messing with voltages governors and clock speeds. You can really make a difference when you do. Undervolting and overclocking the gpu and reducing max clock speed to 1000, is how i used to play games. Now i switched to my shield for games.
Azeazezar said:
Well, its not a solution because there is no problem.
These phones are going to get hot when used to game. By design. No way around it. Unless you start messing with voltages governors and clock speeds. You can really make a difference when you do. Undervolting and overclocking the gpu and reducing max clock speed to 1000, is how i used to play games. Now i switched to my shield for games.
Click to expand...
Click to collapse
rom slimsaber + new kernel, does low temp.
this rom have option setting clock processor
i set automatic brightness
i will be testing
USE THE BETA FROM A RECENT POST IF YOU ARE USING CM13!
This is a kernel for Cyanogen Mod 13 and 12.1, which was originally based on the EvoMix kernel by Alx31, olivieer and SuperHanss. Due to Alx31's lack of time and in order to archive maximum compatibility and to benefit from latest updates, I decided to recreate a new kernel, forked from CM's very latest official one (thanks to qsnc). It has a focus on stability, performance, endurance and overclock-ability (roughly in that order).
It uses the original ramdisk of the installed kernel (thanks to osm0sis), for maximum compatibly in the long run and instant adaptability to most source changes. It should also work with other CM13/12.1 based ROMs, like crDroid and PAC.. Please don't report bugs to qsnc, if you are using this kernel!
Features (compared to CyanogenMod's official kernel):
build using the original Linaro 4.8.5 toolchain
CPU: over/under-clock 1728MHz-192 MHz possible
additional governors: abyssplugv2, alucard, dancedance, darkness, lionheart, nightmare, pegasusq, wheatley
Voltage Control (under-/over voltage)
GPU: over/under-clock 487MHz-27MHz + simple governor
additional file-systems: exFAT, NTFS
intelli-plug hot-plugger and power saver
restrict maximum screen off frequency
Sound Control 3.x (poweramp controls, loudness enhancements)
kernel mode NEON optimizations
optimized AES and SHA1 routines (faster encryption)
compressed by using LZ4 (faster boot)
fsync on/off support (turn of for higher disk performance, but increased risk of data-loss)
KSM support (Kernel Samepage Merging)
multirom compatibility (kexec-hardboot)
fast-charge support (not recommended and only works with dock, not with USB-charger!)
numerous small performance improvements
...
Performance: about 10% faster than original CM12.1-kernel with same settings, and some additional 20% speed by using maximum over-clocked frequencies (use at your own risk, every device is different!)
Configuration: Kernel Adiutor (https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor) or PerformanceControl 2.2.6 (http://forum.xda-developers.com/devdb/project/?id=600#downloads)
Install: just flash the attached zip with TWRP (http://forum.xda-developers.com/xpe...very-twrp-2-8-7-0-pollux-polluxwindy-t3187811) or CWM
Uninstall: re-flash the complete ROM (just re-flashing the original kernel is not enough!)
Changelog:
2016-04-08:
removed MSM GPU powerscale (more stable and governor selectable)
removed intelli-plug (outdated and obsolete)
fsync no longer enabled by default
synced with latest official CM13 source (many fixes)
2015-12-21:
fast-charge support (not recommended and only works with dock, not with USB-charger!)
synced with latest official CM13 source
2015-11-28:
initial release
IF INSTALLATION FAILS: If the kernel installation is not working (i.e. installation takes less than 5 seconds and you don't see the new boot-logo), re-flash latest ROM, reboot into recovery and try to install the kernel again!
Install a custom recovery first! The simple CyanogenMod Recovery, which comes with most ROMs, is pretty useless anyway..
XDA:DevDB Information
Black Kernel for CyanogenMod-based ROMs, Kernel for the Sony Xperia Tablet Z
Contributors
BlackAfghan, qsnc, Alx31, olivieer and SuperHanss
Source Code: https://github.com/Gabriel85/android_kernel_sony_apq8064
USE THE BETA FROM A RECENT POST IF YOU ARE USING CM13!
Downloaded, installed, checked.
Screen rotation is working again.
Thanks a lot for maintaining.
Thx for the update. One question; couldn't see fast charge option - available?
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Awesome, thanks man for the update! This tablet is still chugging away very strong for its age and thanks to you for adding some more stream to it!
Great scott!
Essentrix said:
Thx for the update. One question; couldn't see fast charge option - available?
Click to expand...
Click to collapse
I don't think that fast-charge ever worked on the Tablet.. or did it?
cantenna said:
Awesome, thanks man for the update! This tablet is still chugging away very strong for its age and thanks to you for adding some more stream to it!
Click to expand...
Click to collapse
You’re welcome! :good:
BlackAfghan said:
I don't think that fast-charge ever worked on the Tablet.. or did it?
Hi mate yes evomix kernel has the fast charge. Gone back to it for the time being - it's one feature that makes a huge difference to charging time. Look forward to seeing you add the feature when you get the chance. Cheers
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Essentrix said:
BlackAfghan said:
I don't think that fast-charge ever worked on the Tablet.. or did it?
Hi mate yes evomix kernel has the fast charge. Gone back to it for the time being - it's one feature that makes a huge difference to charging time. Look forward to seeing you add the feature when you get the chance. Cheers
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Are you really sure that it actually charges faster? I think the maximum it uses are 1500mA, and that is not even enough for the tablet to run with maximum brightness without discharging the battery! I doubt fast-charging makes any difference..
Click to expand...
Click to collapse
BlackAfghan said:
Essentrix said:
Are you really sure that it actually charges faster? I think the maximum it uses are 1500mA, and that is not even enough for the tablet to run with maximum brightness without discharging the battery! I doubt fast-charging makes any difference..
Click to expand...
Click to collapse
Seems to make a decent difference with mine. Previously the charge took forever - using crdroid ROM - now quite fast. Might time the next charge.
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Tablet Z doesn't have the fast charge function, so I suppose it's just your feelings or the tablet not fully discharged. To me no difference at all.
BlackAfghan said:
Are you really sure that it actually charges faster? I think the maximum it uses are 1500mA, and that is not even enough for the tablet to run with maximum brightness without discharging the battery! I doubt fast-charging makes any difference..
Click to expand...
Click to collapse
Under normal charge via microusb port, maximum current is 1,5A, even using 2A charger. But when using dock contacts and ipad 2,4A adapter, it easily exceeds 2A, which significantly reduces charging time.
Essentrix said:
BlackAfghan said:
Seems to make a decent difference with mine. Previously the charge took forever - using crdroid ROM - now quite fast. Might time the next charge.
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Tested charging and both this and evo about the same. Both are faster than stock kernel. I did change the charger and could also be to do with flashing non stock kernels?
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
BlackAfghan Thanks for listening to my post and adding up 400MHz in GPU. But I can't set the GPU governor now, I don't see that option. I was running CM 12.1 latest nightly on my Pollux.
IlD4nX said:
Tablet Z doesn't have the fast charge function, so I suppose it's just your feelings or the tablet not fully discharged. To me no difference at all.
Click to expand...
Click to collapse
I agree..
Rootk1t said:
Under normal charge via microusb port, maximum current is 1,5A, even using 2A charger. But when using dock contacts and ipad 2,4A adapter, it easily exceeds 2A, which significantly reduces charging time.
Click to expand...
Click to collapse
Makes also sense..
Essentrix said:
Essentrix said:
Tested charging and both this and evo about the same. Both are faster than stock kernel. I did change the charger and could also be to do with flashing non stock kernels?
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Absolutely..
I'll add fast-charge to the next release!
Alok Bajaj said:
BlackAfghan Thanks for listening to my post and adding up 400MHz in GPU. But I can't set the GPU governor now, I don't see that option. I was running CM 12.1 latest nightly on my Pollux.
Click to expand...
Click to collapse
I thought that is related to KernelAdiutor? Nevertheless, it uses the effective simple govenor by default! Also I reduced to minimum frequency significantly, in order to save power.
Click to expand...
Click to collapse
Hello, I have just flashed this kernel on my Z Tablet with crDroid rom, and tried it with Antutu.
I am getting a 30k score with this, and 32k with crDroid rom's kernel. Can i do something to improve it?
Marco Odradek said:
Hello, I have just flashed this kernel on my Z Tablet with crDroid rom, and tried it with Antutu.
I am getting a 30k score with this, and 32k with crDroid rom's kernel. Can i do something to improve it?
Click to expand...
Click to collapse
Repeat it at least 5 times! But I never got more than 27k..
crDroid allows over-clocking, too?
BlackAfghan said:
Repeat it at least 5 times! But I never got more than 27k..
crDroid allows over-clocking, too?
Click to expand...
Click to collapse
I did it 3 times.
I didn't check if crDroid overclock by default.
Just tried with 1.7 ghz and got 33k
New version is out... Happy holidays! :angel:
fast-charge support (not recommended and only works with dock, not with USB-charger!)
synced with latest official CM13 source
Click to expand...
Click to collapse
BlackAfghan said:
New version is out... Happy holidays! :angel:
Click to expand...
Click to collapse
Still working with CM12.1 ROMS?
There is no newer Rom since 12.1 ?
So i think answer must be: yes
any one tell me what the best rom or kernel or stock rom version give me best battery life
and give me feedback screenshot screen on time battery
i tested every rom and kernel,i dont care about anything but battery life and temp,i say you should use M-ROM 1.9.5 an use zachs kernel 2.4.9,another kernels have lots of battery draining.this is my comment and i hope i could help
pou_gh2 said:
i tested every rom and kernel,i dont care about anything but battery life and temp,i say you should use M-ROM 1.9.5 an use zachs kernel 2.4.9,another kernels have lots of battery draining.this is my comment and i hope i could help
Click to expand...
Click to collapse
can you please post the link for those would be very much appreciated. Thanks!
pou_gh2 said:
i tested every rom and kernel,i dont care about anything but battery life and temp,i say you should use M-ROM 1.9.5 an use zachs kernel 2.4.9,another kernels have lots of battery draining.this is my comment and i hope i could help
Click to expand...
Click to collapse
you can upload some screenshot about battery time and screen on time
kgalv419 said:
can you please post the link for those would be very much appreciated. Thanks!
Click to expand...
Click to collapse
https://mega.nz/#!5ol0gLwS!Fdw5Vgirp...oz4xTVQ31rpuYAthis is for dual and any device you have do what i say and your battery will become better,put little and big cores freq on 1.2 and i\o on tripndroid
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
AhmedHussam said:
you can upload some screenshot about battery time and screen on time
Click to expand...
Click to collapse
sure just wait a little because i connected my phone to charger and its refreshed
pou_gh2 said:
https://mega.nz/#!5ol0gLwS!Fdw5Vgirp...oz4xTVQ31rpuYAthis is for dual and any device you have do what i say and your battery will become better,put little and big cores freq on 1.2 and i\o on tripndroid
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
sure just wait a little because i connected my phone to charger and its refreshed
Click to expand...
Click to collapse
okay ,, i want you upload screen on battery on 100% to 15% please because i want see battery permission
AhmedHussam said:
okay ,, i want you upload screen on battery on 100% to 15% please because i want see battery permission
Click to expand...
Click to collapse
ok i will send them just plz tell me how can i put a picture on this forum because i never sent for anyone any pic
pou_gh2 said:
ok i will send them just plz tell me how can i put a picture on this forum because i never sent for anyone any pic
Click to expand...
Click to collapse
me too
AhmedHussam said:
me too
Click to expand...
Click to collapse
ok i find a way
AhmedHussam said:
okay ,, i want you upload screen on battery on 100% to 15% please because i want see battery permission
Click to expand...
Click to collapse
Thanks for the link bro but I do believe a decryption key is required. thanks
kgalv419 said:
Thanks for the link bro but I do believe a decryption key is required. thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/xperia-z4/development/rom-t3544005
I'm usin linegeOS (android version 7.1.1) and batery life is good..□.\
Poslano z mojega GT-I9100 z uporabo Tapatalk
ahmed just do this: (every device you have (with sd810)flash zachs kernel in this forum(version 2.4.9)do what i say and your battery will become better,put little and big cores freq on 1.2 and i\o on tripndroid)and i couldnt find any way to send screenshot?????,just flash the rom and if it was bad just flash stock(or anything you like)just before that make a backup of data and system
AhmedHussam said:
https://.xda-.com/xperia-z4/development/rom-t3544005
Click to expand...
Click to collapse
Thanks again. Now quick question I noticed they had the translation for some of the stuff but there were somethings not translated is there anyway you could tell me what all you chose and didn't choose. I know it's preference but I get the feeling we both like our phones to run the same way. Any help would be appreciated thanks .
Best Kernel
Hi can someone post a link for the best kernel to use with MRom, I tried the Z4_Z3P-DSDS_SK_Perm_v5.11_III.2_4_9_ctl_X_ivy_dual however the moment I flashed it the phone got crazy hot even after adjusting the frequencies also experienced problems with certain apps closing, camera doesn't even last seconds before it turns off, I had to flash back stock kernel to get function-ability. Not sure if that was the correct version for me to flash so I'm asking or if there is any tips to making it work. Thanks :good:
kgalv419 said:
Hi can someone post a link for the best kernel to use with MRom, I tried the Z4_Z3P-DSDS_SK_Perm_v5.11_III.2_4_9_ctl_X_ivy_dual however the moment I flashed it the phone got crazy hot even after adjusting the frequencies also experienced problems with certain apps closing, camera doesn't even last seconds before it turns off, I had to flash back stock kernel to get function-ability. Not sure if that was the correct version for me to flash so I'm asking or if there is any tips to making it work. Thanks :good:
Click to expand...
Click to collapse
just install latest update sunkernal and give me feedback
AhmedHussam said:
just install latest update sunkernal and give me feedback
Click to expand...
Click to collapse
Ok will try that and see what happens, so far i got the best temperature and battery with stock. Will go ahead and flash latest sun Kernel and see what results I get.
AhmedHussam said:
just install latest update sunkernal and give me feedback
Click to expand...
Click to collapse
So I installed the latest sun kernel yesterday (v2.6), and had the phone running an entire day with it. In all honesty it was pretty smooth I still haven't noticed any bugs, lags, force-closes, etc. The only thing is a slight difference with temperatures compared to stock kernel see in pic (stock kernel left, sun kernel right). I have placed pics to show the differences, as for battery life I haven't been able to compare them as of yet. However I can say using stock kernel with minimal usage over a period of 9 hrs after full charge I got down to 57% so I will test the same with this latest sun kernel. The only other thing I am curious about are the CPU's, reason being with stock kernel the 4 big cores always showed offline using Kernel Auiditor and I can't adjust the frequencies. With this sun kernel it's the same situation. The 4 big cores are always offline and just remain that way at start up one of them becomes active for a couple of minutes with a frequency of 384MHZ then goes offline. Any insights as to why this is so would be appreciated. Any feedback will be appreciated. :fingers-crossed:
kgalv419 said:
So I installed the latest sun kernel yesterday (v2.6), and had the phone running an entire day with it. In all honesty it was pretty smooth I still haven't noticed any bugs, lags, force-closes, etc. The only thing is a slight difference with temperatures compared to stock kernel see in pic (stock kernel left, sun kernel right). I have placed pics to show the differences, as for battery life I haven't been able to compare them as of yet. However I can say using stock kernel with minimal usage over a period of 9 hrs after full charge I got down to 57% so I will test the same with this latest sun kernel. The only other thing I am curious about are the CPU's, reason being with stock kernel the 4 big cores always showed offline using Kernel Auiditor and I can't adjust the frequencies. With this sun kernel it's the same situation. The 4 big cores are always offline and just remain that way at start up one of them becomes active for a couple of minutes with a frequency of 384MHZ then goes offline. Any insights as to why this is so would be appreciated. Any feedback will be appreciated. :fingers-crossed:
Click to expand...
Click to collapse
screenshot the battery screen on
AhmedHussam said:
screenshot the battery screen on
Click to expand...
Click to collapse
See below. The first screenshot was my battery with stock kernel after 9 hrs of minimal usage. The other 2 are with sun kernel after 9 hrs so as you can see there isn't a huge difference. So battery wise its not that bad.
Hey there guys! I'm creating this discussion for y'all to post the stuff mentioned in the title. These things are crucial to making decisions when choosing roms, realising bugs in updates or apps etc(or even choosing the phone itself). Also please do mention your ROM, kernal version, build number and any other relevant info that would make comparisons ( and conclusions) more fair ( and accurate).
P.S : screenshots of battery chart and activity are quite helpful too :good:
Today it took 3 hours and 25 minutes for my phone to charge from 5% to 100% percent. Is that bad or good? Or is it just okay?
Stock locked bootloader with .339
For my phone, 3 hours 25 min seems okay. When the phone is new it only takes around 2.5 hours to charge. Nowadays, I take me anywhere from 3.5 to 5 hour to charge. Not sure whether it is due to some apps in my phone or the charger that I use is not good enough. I am still okay with it since I usually charge the phone once every few days.
This for almost min usage (kinda between moderate and min usage). In stock, non root, build .339 greenify with adb permissions
Stock not rooted
vikas44493 said:
Stock not rooted
Click to expand...
Click to collapse
Looks kinda complicated..... Maybe stock battery setting SS will be more useful
Well i got this one.
All pure stock, no root or modifications.
gusbalaa said:
Well i got this one.
All pure stock, no root or modifications.
Click to expand...
Click to collapse
Hmm looks good.... But is there a bit of unusual idle drain going on ? Or maybe it's just me
Heres my latest with specs same as yours
GliderZ said:
Hmm looks good.... But is there a bit of unusual idle drain going on ? Or maybe it's just me
Heres my latest with specs same as yours
Click to expand...
Click to collapse
I had no idea with idle drain. Can't sure I'm face it also.
STOCK ROOTED + greenify
abubin said:
For my phone, 3 hours 25 min seems okay. When the phone is new it only takes around 2.5 hours to charge. Nowadays, I take me anywhere from 3.5 to 5 hour to charge. Not sure whether it is due to some apps in my phone or the charger that I use is not good enough. I am still okay with it since I usually charge the phone once every few days.
Click to expand...
Click to collapse
5ish hours is a bit too much. Is it on the stock charger and cable?
DeMockCracy said:
5ish hours is a bit too much. Is it on the stock charger and cable?
Click to expand...
Click to collapse
Yes I use stock and the cable is a bit loose from the pin side, don't know why it takes this much to charge? Help needed!
abubin said:
For my phone, 3 hours 25 min seems okay. When the phone is new it only takes around 2.5 hours to charge. Nowadays, I take me anywhere from 3.5 to 5 hour to charge. Not sure whether it is due to some apps in my phone or the charger that I use is not good enough. I am still okay with it since I usually charge the phone once every few days.
Click to expand...
Click to collapse
I Flash havoc 2.6 11/6/19 build and my phone take 7-8 hours to full charge:crying. when there is 40% charge left i put my phone on charge and see 6hours until it full can this issue will be fix or not please hlep me
THANK YOU
HYPERHAISE said:
I Flash havoc 2.6 11/6/19 build and my phone take 7-8 hours to full charge:crying. when there is 40% charge left i put my phone on charge and see 6hours until it full can this issue will be fix or not please hlep me
THANK YOU
Click to expand...
Click to collapse
use PBH kernal 14.1 or later. charging to 100% takes approx 3hours
Rounak7 said:
use PBH kernal 14.1 or later. charging to 100% takes approx 3hours
Click to expand...
Click to collapse
but bro when i flash pbh my phone not booting normally my phone automatically switch on Fastboot and power button not working properly