I 'm not responsible for any bricked devices, dead SD card.
So if you use my tools, do not point the finger at me for messing up your devices.
Although I think everybody see too much of this messenge, I still need to say
This is my first custom kernel
I'm not a programmer. I just a student. So my project just do some easy, simple things. I will keep learning.
Here is the introduction of the kernel:
Prepare
1. Unlock your bootloader
2. Use stock Nougat ROM
3. TWRP recovery
4. Backup the wlan.ko module which is located in /system/lib/modules/pronto/pronto_wlan.ko
just use root explorer to copy it
feature
1. More I/O Scheduler
fiops
sio
fifo
sioplus
tripndroid
vr
zen[defult]
2. Disable CRC check to increase 30% I/O performance
3. Sdcardfs filesystem supported
4. What features I will try to add
more CPU Governor
CPU hotplug
CPU Overclock
CPU Underclock
F2FS filesystem supported
some defult value
ToolChain
aarch64-linux-android-4.9
https://source.codeaurora.org/quic/la/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9
Based on ASUS ZE552KL Kernel Source v.14.2020.1708.56
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/ZE552KL_Kernel_14.2020.1708.56.zip?_ga=2.24090170.1490298772.1507649745-394588847.1496889431
Update
10/21
Add several CPU hotplug driver
Alucard
Zen Decision
SY-Kernel-ZE552KL kernel source
https://github.com/samyeh9999/SY-Kernel-ZE552KL-Stock-7.0
Download
https://drive.google.com/open?id=0BxhDAWc5rcApWjQ5eHlRanZIVmc
Install
just boot to twrp recovery and flash it.
Uninstall
1. replace /system/lib/modules/pronto/pronto_wlan.ko by pronto_wlan.ko you backup, and give it permission 0644.
install stock boot.img
2. or just reflash full ROM from ASUS official website
Credits
@shakalaca
@shakalaca
@shakalaca
@shakalaca
@shakalaca
for teach me everythings
and @CrazyGamerGR
for his kernel source for HTC 10
https://github.com/CrazyGamerGR/CrazyAquaKernel-htc10-los
and @tony8077616
for give me a flashable zip to use,
and testing kernel
Sorry for that I can't tag their name because I don't have their friend link at XDA
At the end, sorry for my poor, poor, poor English.
By the way, if you are Chinese or Taiwanese, or you can read traditional Chinese word.
You can go here
https://www.asus.com/zentalk/tw/thread-296564-1-1.html
for my always first post.
XDA:DevDB Information
SY-Kernel Stock 7.0, Kernel for the Asus ZenFone 3
Contributors
samyeh9999
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: v2
Stable Release Date: 2017-10-21
Created 2017-10-16
Last Updated 2017-11-19
samyeh9999 said:
I 'm not responsible for any bricked devices, dead SD card.
So if you use my tools, do not point the finger at me for messing up your devices.
Although I think everybody see too much of this messenge, I still need to say
This is my first custom kernel
I'm not a programmer. I just a student. So my project just do some easy, simple things. I will keep learning.
Here is the introduction of the kernel:
Prepare
1. Unlock your bootloader
2. Use stock Nougat ROM
3. TWRP recovery
4. Backup the wlan.ko module which is location in /system/lib/modules/pronto/pronto_wlan.ko
just use root explorer to copy it
feature
1. More I/O Scheduler
fiops
sio
fifo
sioplus
tripndroid
vr
zen
2. Disable CRC check to increase 30% I/O performance
3. What features I will try to add
more CPU Governor
CPU hotplug
CPU Overclock
CPU Underclock
F2FS filesystem supported
sdcardfs filesystem supported
some defult value
ToolChain
aarch64-linux-android-4.9
https://source.codeaurora.org/quic/la/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9
Based on ASUS ZE552KL Kernel Source v.14.2020.1708.56
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/ZE552KL_Kernel_14.2020.1708.56.zip?_ga=2.24090170.1490298772.1507649745-394588847.1496889431
SY-Kernel-ZE552KL kernel source
https://github.com/samyeh9999/SY-Kernel-ZE552KL-Stock-7.0
Download
https://drive.google.com/open?id=0BxhDAWc5rcApWjQ5eHlRanZIVmc
Install
just boot to twrp recovery and flash it.
Uninstall
1. replace /system/lib/modules/pronto/pronto_wlan.ko by pronto_wlan.ko you backup, and give it permission 0644.
install stock boot.img
2. or just reflash full ROM from ASUS official website
Credits
shakalaca
shakalaca
shakalaca
shakalaca
shakalaca
for teach me everythings
and CrazyGamerGR
for his kernel source for HTC 10
https://github.com/CrazyGamerGR/CrazyAquaKernel-htc10-los
and 孟武
for give me a flashable zip to use
Sorry for that I can't tag their name because I don't have their friend link at XDA
At the end, sorry for my poor, poor, poor English.
By the way, if you are Chinese or Taiwanese, or you can read traditional Chinese word.
You can go here
https://www.asus.com/zentalk/tw/thread-296564-1-1.html
for my always first post.
XDA:DevDB Information
SY-Kernel Stock 7.0, Kernel for the Asus ZenFone 3
Contributors
samyeh9999
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: v1
Stable Release Date: 2017-10-12
Created 2017-10-16
Last Updated 2017-10-16
Click to expand...
Click to collapse
Hahahaha,Congratulations
Nice work man! Keep it up!
The ZF3 communication is starving and hungry for custom stuff...
Wow very nice
Finally!! A custom kernel
Testing... Can you try add qc3 ? Hahaha
---------- Post added at 02:10 PM ---------- Previous post was at 01:56 PM ----------
Im using tripndroid...
angeloamorato said:
Testing... Can you try add qc3 ? Hahaha
---------- Post added at 02:10 PM ---------- Previous post was at 01:56 PM ----------
Im using tripndroid...
Click to expand...
Click to collapse
well.........what I know is, QC3 is not only needs kernel supports, it also needs hardware support.
so.......I can't help you :silly: haha
cieffe54 said:
Finally!! A custom kernel
Click to expand...
Click to collapse
yeah, finally.
I also wait for this day very long time
samyeh9999 said:
yeah, finally.
I also wait for this day very long time
Click to expand...
Click to collapse
Tonight test it!
CygnusBlack said:
Nice work man! Keep it up!
The ZF3 communication is starving and hungry for custom stuff...
Click to expand...
Click to collapse
It seems like those awesome programmers doesn't have ZF3, unfortunately
samyeh9999 said:
yeah, finally.
I also wait for this day very long time
Click to expand...
Click to collapse
Before I flash I have to uninstall Magisk and Xposed ??
did you add support for custom roms in future?
I'm having bootloop on ze520kl with the latest firmware
cieffe54 said:
Before I flash I have to uninstall Magisk and Xposed ??
Click to expand...
Click to collapse
no, but you need to reinstall magisk after install this kernel
if the xposed you used by systemless mode, also.
ExperienceTesla said:
did you add support for custom roms in future?
Click to expand...
Click to collapse
After a long time, maybe, but now I focus on kernel for stock ROM
I have limited time to do this project.
Felipe_Salves said:
I'm having bootloop on ze520kl with the latest firmware
Click to expand...
Click to collapse
thanks for report, i will contact my friend and try to fix this.
samyeh9999 said:
thanks for report, i will contact my friend and try to fix this.
Click to expand...
Click to collapse
It was acctually the 14.2020.1708.56 not the latest, i don't know if makes any difference
Felipe_Salves said:
It was acctually the 14.2020.1708.56 not the latest, i don't know if makes any difference
Click to expand...
Click to collapse
try to flash full stock ROM, and don't apply any other flashable zip, and flash the kernel
maybe something you flash is incompatible with this kernel
samyeh9999 said:
well.........what I know is, QC3 is not only needs kernel supports, it also needs hardware support.
so.......I can't help you :silly: haha
Click to expand...
Click to collapse
hmm iknow some device that dont have qc ...
But because of custom kernel they will having qc...
If im wrong please add feature under volt hahahaha thanks in advance bro ..
Goodluck and Godbless
angeloamorato said:
hmm iknow some device that dont have qc ...
But because of custom kernel they will having qc...
If im wrong please add feature under volt hahahaha thanks in advance bro ..
Goodluck and Godbless
Click to expand...
Click to collapse
could you tell me what deices, what kernel it is?
maybe I can try
Related
HI all,
I am presenting you the new version stock 4.2.2 kernel.
Disclaimer :- i am not responsible for any broken or bricked devices.
PLEASE BACK UP DATA BEFORE U FLASH. I AM NOT RESPONSIBLE FOR DATA LOSS.
Give me feed back.
thank you all.
Version -
29/11/2013 version 0.1
http://www.mediafire.com/download/j58tf04t1nq4441/k2wlEXP_0.1.zip
1/12/2013
https://www.mediafire.com/?2h88wa37lw6l17r
3/12/2013
https://www.mediafire.com/?68kcn5db41f23i2
3/12/2013 0.4 version
https://www.mediafire.com/?s578mz58hc9gm5s
05/12/2013 version 0.6
yes i skipped 0.5 version.
https://www.mediafire.com/?se915usu7tijybs
06/12/2013 version 0.7
https://www.mediafire.com/?xa3eel988t91a6a
06/12/2013 version 0.7.1
https://www.mediafire.com/?cgbx6s0i3v0ta4x
06/12/2013 version 0.8
https://www.mediafire.com/?sqzg9rvv7u5x89j
07/12/2013 version 0.9
https://www.mediafire.com/?nriwmydwurb5e0x
07/12/2013 version 0.9.1 fixed
https://www.mediafire.com/?alk0x4n252nx45u
From next version the download will be in following location
https://www.mediafire.com/folder/bl2cvbmgclcfc/stocki9082
From 1.6.1 version downloads will be in following locations.
http://www.androidfilehost.com/?w=files&flid=12474
credits :-
samsung for source
link for source
https://github.com/k2wl/evolution_i9082.git
Changelog : -
version 29/11/2013
Added overclocking upto 1.4 Ghz
added small undervolting for battery saving.
Version 01/12/2013
fixed soft reboot issue.
version 03/12/2013
hopfully fixed reboot and wifi issue
Version 0.4
OC support upto 1400
version 0.6
kernel update to 3.0.32
plz test. i dont have device right now.
version 0.7
hopefully fixed call reboot issue.
Version 0.8
highly experimental, do not flash if you dont know what u doing.
Added new governers adaptive, lulzactiveq,zzmoove, pegasusq, userspace.
Version 0.9
Revert few OC changes and code, should fix charging problem.
added frandom as module.
0.9.1
revert all changes and rebase back to 4.2.2 kernel source.
1.0
Update to 3.0.101.
OC upto 1.7 Ghz
ew version up.
Version 1.6.1
- bluetooth fixed...hopefully..
- implemented boeffela sound 1.6 (thanks to andip71)
- few performance tweaks
- see git log for more
Version 1.7.2
- Hopefully fixed reboot issues....
Version 1.7.8
New version 1.7.8 is here
Versionn 1.7.8
Highly experimental and great kernel...
i am cant post log here...
its long...
so see it yourself on github...
https://github.com/k2wl/evolution_i9082/commits/cm11exp1
from page 1 to 18 ......too long....
version 1.7.9
- Compiled with latest SM toolchain 4.10 (see the screenshot)
- Enable smartass2
- few performance changes
more reserved in case!
Great work.. Thanks..
Sent from my GT-I9082 using Tapatalk 2
k2wl said:
I am posting here a Custom kernel build on source for I9082 Galaxy grand duos.
Disclaimer :- i am not responsible for any broken or bricked devices.
Features
a. Compiled with google toolchain 4.7
b. Compiled with latest kernel building optimizations O3, Ofast.
c. Specific kernel flags Optimised specially for our beloved i9082
d. Fast usb charging support. Now you can get fast charging by connecting usb like AC adapter.
e. Customized CPU governers like hotplug, pegasusq (original Samsung governer for multicore support), interactivex, gallimaufry, ondemandx,sakuractive,lulzactive, smartassV2, adaptiveX,lagfree, etc in all around 15 governers to choose from for different needs.
f. I/O schedulers added SIO,fifo,row,V(R).
g. Disabled MMC_CAP_ERASE -> no more hardbrick bug
so now fun part. How to install???
1.download the file below
http://d-h.st/qk4
2.copy to root of ur partition like c:/ or d:/ etc (it's easier to remember and locate)
3. connect your phone to pc & open odin3 3.04 (search xda or google)
make sure u have drivers properly installed and odin shows blue connection sign with [com].!!!
4. click on pda & select kernel_k2wl_v1.tar
5. click start. & wait until says pass and phone reboots.
now you have custom kernel.
how to use features
if u have my latest rom then it has no frill cpu app included or download no frill cpu from play store its free. you can also use setCPU which is paid ...change governors and i/o according to ur will . but do it all on ur own risk.
i recommend hotplug as governor and sio as i/o with max frequency of 1.2ghz and min of 600mhz.
more features coming in next update.
issues please report here.
credits :-
samsung for source
Click to expand...
Click to collapse
What banefit
Sent from my GT-I9082 using xda premium
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
DBZo07 said:
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
Click to expand...
Click to collapse
Will surely add BLN mod as soon as possible.
thanks for suggestion.
Im the guinea pig
I'll be testing this on the Latin variant 9082L
DBZo07 said:
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
Click to expand...
Click to collapse
Nice suggestion to add BLN Mod..:thumbup:
Sent from my GT-I9082 using Tapatalk 2
k2wl said:
Will surely add BLN mod as soon as possible.
thanks for suggestion.
Click to expand...
Click to collapse
it's my pleasure to get best possible mods from you!!
keep up the work..
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
KSKHH said:
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
Click to expand...
Click to collapse
no OC at present ..i am testing it..
no issues so far its stable and no reboot or overheating issues.
KSKHH said:
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
Click to expand...
Click to collapse
see my rom thread . in OP i have put an attachment about files i have removed. you requested it previously as i remembered right???
Stock Samsung I9082XXAMCD_V1.1 ROM > http://d-h.st/mYW
k2wl can we use your kernel to bali's rom?
immcbee said:
Stock Samsung I9082XXAMCD_V1.1 ROM > http://d-h.st/mYW
k2wl can we use your kernel to bali's rom?
Click to expand...
Click to collapse
ya u can use it with any stock rom u want either from balliboxer or me or even samsung default rom
k2wl said:
ya u can use it with any stock rom u want either from balliboxer or me or even samsung default rom
Click to expand...
Click to collapse
Thanks for the info i will try this
Sent from my GT-I9082 using Tapatalk 2
Excellent work mate, if we keep progressing like this we might get our own sub-forum! Some suggestions -
1) You could integrate CWM recovery with the kernel, if you haven't done it already. Then provide a .tar one package file for flashing via ODIN
2) Maybe add a warning about triggering an increase in binary counter in OP
3) Does it support Vodoo sfx?
Waiting for OC! (I hope you have a JTAG jig ready, especially with the amount of development you are doing)
P.S. - We can also check out support for Heimdall and Mobile Odin
Tianhe said:
Excellent work mate, if we keep progressing like this we might get our own sub-forum! Some suggestions -
1) You could integrate CWM recovery with the kernel, if you haven't done it already. Then provide a .tar one package file for flashing via ODIN
2) Maybe add a warning about triggering an increase in binary counter in OP
3) Does it support Vodoo sfx?
Waiting for OC! (I hope you have a JTAG jig ready, especially with the amount of development you are doing)
P.S. - We can also check out support for Heimdall and Mobile Odin
Click to expand...
Click to collapse
thanks for feedback!!! i dont have JTAG jig with me... im just experimenting...
it does not have vodoo sfx yet
no feed back on kernel??? is anybody using it or not????
pllz leave a feedback
Well. I am waiting for the O.C feature before using it.
Supports all AOSP / CM based KitKat ROMs (Be sure to download the correct version)
WARNING!: Only flash the kernel for your device, flashing the wrong kernel can/will lead to hard brick. Never try to install the 5110/5100 on to the 5120 and never install the 5120 on to the 5110/5100.I recommend Trickster MOD and No-frills CPU Control to customize the kernel.
Use at your own risk.
Be sure to make a full nandroid backup before flashing.I am not responsible for any damages that may occur.
Features:
Linux 3.0.71
OC & UV support for CPU and GPU
Max CPU speed is 1920MHz
Max GPU speed is 700MHz
Exfat support
DynamicFSYNC
Governors: Adaptive, Pegasusq(default), Interactive, Powersave, Performance, Ondemand, Userspace, LulzActivQ, SmartassH3, ZZmoove.
ARCH-Power enabled
ZRAM
Dynamic read-ahead
Hotplugging enable/disable
TriangleAway Support
j4fs support
Frontswap Support
Click to expand...
Click to collapse
Downloads: DracoKernel
You will see two folders "Normal ROMs" and "Alternate ROMs"
Use the normal one if you are running: CM, AOSB, Slim, or Beanstalk.
Use alternate if you are running: Carbon or Omni
Since PAC adds its own custom frameworks, it will have its own version.
If you flash the wrong one, you will be stuck on the bootanimation. Easy fix, just go flash the other one.
Installation:
Flash in recovery.
Then flash SuperSU
Goals of this kernel:
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end. With that being said, I am open to any suggestions and contributions, but I will only implement it in if it makes sense to me and does not hinder one's experience using this as a daily driver. Also, try to limit talk of benchmark scores because they do not accurately depict real life experience.
Source: https://github.com/ryukiri/DracoKernel
XDA:DevDB Information
[Kernel][N5110 / N5120 / N5100] DracoKernel, a Kernel for the Samsung Galaxy Note 8.0
Contributors
ryukiri
Kernel Special Features:
Version Information
Status: Testing
Created 2014-02-23
Last Updated 2014-05-03
Reserved
Changelog:
2.22.2014
Initial Release
Reserved
To Do:
Make sure it compiles with linaro and -O3 optimizations
BLN support
Check Boeffla sound problem
Doubletap2wake (low priority since our hardware limitations will cause it to have massive battery drain)
USB OTG
Touchwake(?)
Patch up to Linux 3.0.101
Dual boot (not sure since I don't use it much, but i may implement it in the future)
Suggestions?
Click to expand...
Click to collapse
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
people could always use mobile odin though.
mobile seem not working on the current nightly, so unable to flash
Gekritzelt von meinem Note 8
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
ryukiri said:
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
:cyclops:I have a N5100 also also waiting to try out kernel
matthewtech770 said:
:cyclops:I have a N5100 also also waiting to try out kernel
Click to expand...
Click to collapse
Can you test it?
ryukiri said:
Can you test it?
Click to expand...
Click to collapse
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
matthewtech770 said:
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
Click to expand...
Click to collapse
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
ryukiri said:
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
Click to expand...
Click to collapse
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
matthewtech770 said:
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
Click to expand...
Click to collapse
I apologize for the inconvenience. Just realized that this kernel does not work on anything but PAC. Therefore, I will spend a lot more time testing before releasing again. Thread will be closed until further notice.
Thread re-opened. Figured out the problem faster than I initially expected. Downloads are up for the N5110. I have personally tested them on the ROMs we have. There are two different versions for now so please download the correct one. Enjoy!
FYI: N5100 builds will start shortly (approximately 12-24 hours from now or so), and N5120 will start a day or two after that.
Edit: N5100 should be ready now.
Using on CM 11 (cm-11-20140226-NIGHTLY-n5100.zip) .. not bootloop for me. Works perfectly. As I have installed it just now cant comment on the performance or battery life. Using GravityBox (KK) with Xposed Framework. Didnt face any issues yet.
working with AOSB 1.3.0 on N5100 from 23rd February 2014 , no problem so far.
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Kernel works good at my end (newest nightly). Good job
Gesendet von meinem Nexus 4 mit Tapatalk
rowihel2012 said:
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Click to expand...
Click to collapse
whoops, just checked the code. I forgot to enable it in the defconfigs (files and everything are all in place though). I'll enable it next release. And no its not, I'm going to change the name to DracoKernel in future releases. Currently, thats not too high on my priority list.
Edit: Boeffla sound may take a while. Enabled it but app isn't recognizing that the kernel has the feature..
EDIT! nevermind, i'm an idiot, lol. thanks for this kernel by the way! definitely kicks major ass!
Hello XDA Members,
I am here with my new kernel. This kernel works on Android 7.x based ROMs
Standard disclaimer :
Code:
This product is distributed free of cost and does not come with a warranty. I will not be responsible for anything that may happen to your phone as a result of flashing this kernel. You have been warned !If you come to me saying that this turned my phone into nuclear bomb , I will surely laugh at you !!!
Introduction :
Photon is a fundamental particle of nature which delivers light to us all. It's mindboggling properties like duality, never stopping from being in motion and presence in so many diverse natural phenomena like photoelectric effect, relativity etc. makes the man ultra-curious about it. A photon is born when atoms transition from excited state to ground state. What's the point of this paragraph in a kernel description post?
Well, like a photon this kernel possess duality. How? By giving better battery back up and performance. ( ) What about non-resting nature of photons? Yes, the kernel support will never stop until Nougat says good bye. ( ). OK now don't ask about analogies regarding photoelectric effect and relativity. ( : D ).
Anyways, now coming to the point I am very much glad to present you, the users of condor, my tiny piece of work for our small beast, .
“The Photon Kernel“
I got very much fascinated by the concept of photons when I studied it for the first time and hence (yes, you've guessed it right!) I've named this kernel Photon.
Enough of the physics class today let's look inside the features of the kernel now ( xD ) :
Features :
1)Compiled with UBER toolchain 4.9
2)Used -O3 and graaphite optimisation flag
3)Added few more governers to stock ones. List of all governers :
Impulse
Ondemand
Ondemandplus
Powersave
Performance
Interactive
Userspace
Smartmax
Lionheart
Nightmare
4)More I/O schedulers.List of all I/O schedulers :
noop
deadline
row
cfq
flops
tripndroid
sio
sioplus
vr
zen
bfq
5)Enable Arch Power
6)Disable Gentle Fair Sleepers
So that’s all for the features as of now. More features will be added in future.
This kernel serves me good for daily use and allowes me to use those governers flawlessly.
To-do list :
1)Add more governers(No more governers planned)
2)Add dt2w feature
(DT2W and intelliplug update is ready but I want everything to be nice and shining before adding them )
Downloads :
Grab your photon build here :
https://www.androidfilehost.com/?fid=457095661767122135
Credits :
@squid2
@rainforce279
flar2
Me
Installation Instructions :
1)Download latest zip from the link given
2)Make sure you are on android nougat rom
3)Reboot to twrp recovery and flash the zip(Hope you like installation script)
4)Reboot and profit
Known Issues :
None so far
If you found something ,let me know with last kmesg
If you like my work and you want me to work more on this project , please hit thanks button. It will encourage me a lot !!!
XDA:DevDB Information
Photon Kernel, Kernel for the Moto E
Contributors
ABSathe
Source Code: https://github.com/Ashutosh-01/photon_android_kernel
Kernel Special Features: Multiple custom governers,I/O schedulers
Version Information
Status: Beta
Current Beta Version: r5
Beta Release Date: 2016-11-16
Created 2016-11-02
Last Updated 2016-12-21
Special thanks to : @Vikrant Desai (For writing OP) @neonkat(For helping me )
Important Note :
Please make sure that you are on a stock kernel that comes with your ROM before flashing this.
If you flash this over another custom Kernel it may lead to unexpected issues
I personally use this on AOSP OMS rom
FAQ:
1)I find this kernel useful and want to support further development how should I do it ??
Ans- Hit the thanks button to encourage me
2)I want to suggest few changes to this kernel and want to contribute.
Ans- If you want to contribute .. feel free to create a pull request in my github
3)I want to request feature .
Ans- Ask in this thread.. if I find feature useful and logical .. I'll add it.,I would appreciate if you link me with commit. It's really hard to dig in the sources and find the exact commit.
4)I have an issue , will you help me ?
Ans- I am not any superstar kernel developer, but I will try my best to solve the issue. Here are few steps you should do before reporting issue here.First of all clean flash your ROM and then flash my kernel
If the issue still persists .. report it here with last_kmesg (can be obtained through Kernel Adiutor app)
5)Is this Kernel better than kernel A or kernel B ?
Ans- Please don't ask such questions in this thread .. if you want to use this kernel use it .. if you find issue .. report it here.
6)Which app should I use for tweaking this kernel ?
Ans- Use Kernel Adiutor app from play store
Dt2w works??
Rajendran Rasa said:
Dt2w works??
Click to expand...
Click to collapse
No it doesn't. But it might be added soon.
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
dVinsmoke said:
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
Click to expand...
Click to collapse
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Sent from my Nexus 5X using XDA Labs
ABSathe said:
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Click to expand...
Click to collapse
Take your time
Nice work with the kernel
You could add more hotplugs, Arch power, I/O governors like sio and tcp algorithm westwood and it will be the best kernel for N ?
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
If you want to report an issue report it properly
How to access the kernel settings??
sushant_ said:
How to access the kernel settings??
Click to expand...
Click to collapse
Just download Kernel Adiutor or some similar app from play store
ABSathe said:
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Thanks man!
Any news on dt2w?
WickedCool19 said:
Thanks man!
Any news on dt2w?
Click to expand...
Click to collapse
He mentioned it just two posts above.
Vikrant Desai said:
He mentioned it just two posts above.
Click to expand...
Click to collapse
I asked in context to the new update.
Whether there was something new about it.
WickedCool19 said:
I asked in context to the new update.
Whether there was something new about it.
Click to expand...
Click to collapse
ABSathe said:
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
Click to expand...
Click to collapse
Well, OP said that dt2w haven't been added yet. Only new governors (at least these are the visible changes)
ABSathe said:
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Note: I'm using this kernel with cm 14.1 from squid2
Raxcoms said:
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Click to expand...
Click to collapse
Which ROM u r using??
Ujwal Agrawal said:
Which ROM u r using??
Click to expand...
Click to collapse
Cm 14.1 from squid2
Raxcoms said:
Cm 14.1 from squid2
Click to expand...
Click to collapse
I used r3 version of this kernel on the same ROM and I lost RIL
Ujwal Agrawal said:
I used r3 version of this kernel on the same ROM and I lost RIL
Click to expand...
Click to collapse
It took me arround 2~3 minutes to get RIL working.
RIL wasn't working from the beginning
Development Thread For This Kernel Has Been Moved To The Main Snapdragon Development Forum -- Click Here
For Some Reason I Can No Longer View Any Posts Past Page 23. I'm Wondering If Anyone Else Can, But Regardless Please Use The New Thread For Any Questions Or Comments.
As with anything on XDA, FLASH AT YOUR OWN RISK. While I do my best to test everything there just no way of knowing how a kernel might respond to your current setup. With that being said, PLEASE HAVE A BACKUP just in case
Features
Linux updated to 3.10.108
Permissive
F2FS Support
Voltage control
Overclocked to 2803Mhz
Underclocked to 268Mhz
Kcal Color Control
Simple GPU algorithm
Core temperature control
Adreno Idler
GPU Overclocked to 800
GPU Underclocked to 166
Wake Controls- see next post for tips on working better
Kernel Samepage Merging
Adaptive LMK
Gentle Fair Sleepers disabled
Many TCP protocols
S-View Cover Hack - untested
ZL support- separate version
View attachment KernelAdiutor.apk - Use this app for kernel tuning.
Governors
Nightmare
Interactive_pro
Zzmoove
Bluactive
Yankactive
Alucard
Barry Allen
Umbrella Core
InteractiveX
ConservativeX
Hotplugs
MSM Hotplug
MSM MPDecision aka Bricked
IO Schedulers
BFQ
Sioplus
Sio
VR
Fifo
Fiops
Zen
Row
TripNDroid
Wakelock Controls
Sensor_ind
Msm_hsic_host
For Rooted Versions Click Here
No Root Versions Click Here
Here's how the zips are labeled:
910F in the title- built with the DQI6 (SM-N910F) source code and for use on F model only and maybe G but that's not been tested that I know of.
Does not have 910F in the title- built with CQE1 (SM-N910V) source code and can be used with T,P,W8, and V.
Extended Battery in the title- for those that have the 10,000 mAh batteries to provide a more accurate reading on your battery percentage.
Prior Builds
Flashpoint v1 (Stock)
Flashpoint v1 ZL version
N7 Ports
Flashpoint N7 ports v1
Flashpoint N7 ports V1 ZL version
v3 910V,T,P,W8
v3 910F
Recommended Reading
-For those using the NSeven port, you'll will need to flash the Xposed uninstall zip and the unSu.zip to pass Safetynet. If you're using any other rom that has xposed or SuperSU installed you'll also need to flash those zips to pass.
-Use the MSM Hotplug rather than MPDecision. KA won't allow for cpu cores to turn themselves on and off while using MPDecision hotplug.
-Kernel Adiutor is not perfect. On the first reboot after you set your "run on boot" settings check them to make sure their right. Mostly the hotplug section, it will try to turn MPDecision back on. I've only noticed that on the first reboot, after that it's been pretty solid.
SOURCE CODE
SOURCE CODE 910F
Credits
@topjohnwu
@osmosis
@The Flash
@Pafcholini
@placiano
@Crimsonthunder
@ryanbg
@Hani K.
@kairi_zeroblade
@twistedumbrella
@franciscofranco
@friedrich420
XDA:DevDB Information
Flashpoint Kernel, Kernel for the Verizon Samsung Galaxy Note 4
Contributors
kevintm78
Source Code: https://github.com/kevintm78/Flashpoint_3
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Flashpoint v3.1
Stable Release Date: 2017-12-29
Created 2017-12-28
Last Updated 2017-12-29
Reserved
Reserved
Wake Controls
To get the wake controls working: Turn on the control you want to use in Kernel Adiutor and then, using a root file explorer, go to /sys/android_touch2/ then find the corresponding file ie doubletap2wake and open the file with a text editor. If the file says 0 change it to 1, if it's already one just save and exit. After that it should work every time until you turn it back off in KA. If you want to turn it back on just repeat the above process.
I consider this to be as good as the wake controls are going to get. They've never really worked reliably but at least with this way it does and to be honest I probably won't put too much more work into getting it any better. Sorry.
Reserved
Great start :good:
good job what about w8
Hi,
is there any chance for a F version?
Thanks a lot!
Tim
taylor_t said:
Hi,
is there any chance for a F version?
Thanks a lot!
Tim
Click to expand...
Click to collapse
Yes, I was just now uploading versions for the F,G,T, and w8. Just keep in mind that these are beta releases and untested on those the devices. The F version is booting and running fine on my 910V but if you decide you want to try it, you would in fact be the first.
Here's the F link If you want to try it now. I'm going to test the others before I update the op.
Sorry but didn't work for G.phone not booting after flashing kernel..its stuck on samsung galaxy note 4 start screen.
Hard_Rock83 said:
Sorry but didn't work for G.phone not booting after flashing kernel..its stuck on samsung galaxy note 4 start screen.
Click to expand...
Click to collapse
Oh really. That sucks, that's actually the one I'm running right now since it was the last one I tested. I kind of thought they would work since I used the same method that Ram121 uses but maybe there's something I'm missing still. Did you use or Magisk or supersu? Or neither?
Awesome stuff! Stoked for a Note 7 port kernel! Thanks bossman!
Thanks for your work wil be waiting for your N7port
kevintm78 said:
Oh really. That sucks, that's actually the one I'm running right now since it was the last one I tested. I kind of thought they would work since I used the same method that Ram121 uses but maybe there's something I'm missing still. Did you use or Magisk or supersu? Or neither?
Click to expand...
Click to collapse
first i have tried just flashing kernel thats it..and its stuck.it doesn't gave me chance to flash others and test.
Thanks. Your kernel(s) are much appreciated.
Dear Kevin,
thanks a lot for your quick reply and upload, but I have to say, that the F version doesn't work on my Note 4.
I get only the "kernel is not seandroid enforcing"-message and a blinking LED.
If you need any further information, please let me know. Your new kernel and help is greatly appreciated.
Tim
taylor_t said:
Dear Kevin,
thanks a lot for your quick reply and upload, but I have to say, that the F version doesn't work on my Note 4.
I get only the "kernel is not seandroid enforcing"-message and a blinking LED.
If you need any further information, please let me know. Your new kernel and help is greatly appreciated.
Tim
Click to expand...
Click to collapse
Did you flash supersu?
Successfully installed installed F version on a N7 port with MagiskSU
android_htc said:
Successfully installed installed F version on a N7 port with MagiskSU
Click to expand...
Click to collapse
Does it work on N7port rom?
folusmile said:
Does it work on N7port rom?
Click to expand...
Click to collapse
Yes, testing on RaceROM
Marshall KernelBasic information
Marshall kernel is targeted to be balanced between battery life, stability and performance. It's based on a mix of mk2000, Melina kernel and couple of my mods. H870 is so far the only model supported since its the only one that received stock Pie.
Installation
Wipe cache
Flash kernel
Flash Magisk [Mandatory otherwise the phone won't boot]
Features
Kernel version 3.18.120
USB Fast Charge toggle
CPU Input boost
Adreno Idler
Boeffla WakeLock Blocker
Kcal - Advanced screen color control
K-Lapse v5.0
RCTD/Triton Disabled
Maple I/O Scheduler
WireGuard
DriveDroid support
OpenSource exFAT driver replacement
Improved display latency
Improved performance & battery life
Removed frequency lock
Various other patches/improvements
Download
H870_v0.2_Marshall
Changelog
V0.2-Marshall
- Initial release
Sources
https://github.com/w0lfsvk/msm8996_lge_kernel
mk2000
Melina
LGH870_Android_Oreo_H870_v30a from http://opensource.lge.com
Credits
Melina,
mk2000,
Everyone who helped me with testing,
Special thanks to stendro for his mk2000 kernel build scripts
[emoji41]
Sent from my LG-H870 using Tapatalk
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
Can i simply flash and reboot if i already have magisk installed?
Matt
Sent from my LG-H870 using Tapatalk
matthew33 said:
[emoji41]
Sent from my LG-H870 using Tapatalk
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
Can i simply flash and reboot if i already have magisk installed?
Matt
Sent from my LG-H870 using Tapatalk
Click to expand...
Click to collapse
No, you need to also flash magisk right after the kernel
TheWolfSVK said:
Marshall KernelBasic information
Marshall kernel is targeted to be balanced between battery life, stability and performance. It's based on a mix of mk2000, Melina kernel and couple of my mods. H870 is so far the only model supported, US997 should come soon aswell.
Installation
Wipe cache
Flash kernel
Flash Magisk [Mandatory otherwise the phone won't boot]
Features
Kernel version 3.18.102
CPU Input boost
Adreno Idler
Boeffla WakeLock Blocker
Kcal - Advanced screen color control
RCTD/Triton Disabled
Maple I/O Scheduler
WireGuard
DriveDroid support
OpenSource exFAT driver replacement
Various other patches/improvements
Download
H870_v1.1-Marshall.zip
H870_v1.2-Marshall.zip
Changelog
H870_v1.1-Marshall
-Initial build
H870_v1.2-Marshall
-Fixed kernel version displaying
Sources
https://github.com/w0lfsvk/msm8996_lge_kernel
mk2000
Melina
LGH870_Android_Oreo_H870_v20a from http://opensource.lge.com
Credits
Melina,
mk2000,
Everyone who helped me with testing,
Special thanks to stendro for his mk2000 kernel build scripts
Click to expand...
Click to collapse
Cool, is it possible you could add support for HID devices/android_keyboard_gadget? (Nethunter HID attacks)
I'll be waiting for the US997 release
Mnky313 said:
Cool, is it possible you could add support for HID devices/android_keyboard_gadget? (Nethunter HID attacks)
I'll be waiting for the US997 release
Click to expand...
Click to collapse
Sure but I need someone with US997 for testing
TheWolfSVK said:
Sure but I need someone with US997 for testing
Click to expand...
Click to collapse
Happy to test for US997, it is my main device, but I've got TWRP and backups so I don't mind
Mnky313 said:
Happy to test for US997, it is my main device, but I've got TWRP and backups so I don't mind
Click to expand...
Click to collapse
Join our telegram group:
https://t.me/joinchat/FzTdQURW3-qbsIPkioBIGg
Nice to see another kernel for our device. You wrote inOP that is based on v20A. Will it work well with 20c firmware? Hasn't LG updated the sources?
Thank you for your work
blackhawk_LA said:
Nice to see another kernel for our device. You wrote inOP that is based on v20A. Will it work well with 20c firmware? Hasn't LG updated the sources?
Thank you for your work
Click to expand...
Click to collapse
It works on all oreo versions, Im personally using it over v20c
TheWolfSVK said:
It works on all oreo versions, Im personally using it over v20c
Click to expand...
Click to collapse
Me too.
Sent from my LG-H870 using Tapatalk
Running your kernel on my H870, V20C, so far so good, great work ?
Heya, thanks for the Kernel, I flashed over from Melina kernel - noticed less CPU governeei options - missing my old elementalx setting. Any plans to add more governor settings or have you tuned/optimised the interactive governor in the Kernel
Zander_ said:
Heya, thanks for the Kernel, I flashed over from Melina kernel - noticed less CPU governeei options - missing my old elementalx setting. Any plans to add more governor settings or have you tuned/optimised the interactive governor in the Kernel
Click to expand...
Click to collapse
Im planning to add the elementalx cpu gov.
Another Awesome Release by @TheWolfSVK, Good work man........
at least some devs still care about this device..........
Eliminater74 said:
Another Awesome Release by @TheWolfSVK, Good work man........
at least some devs still care about this device..........
Click to expand...
Click to collapse
True that.
Matt
Sent from my LG-H870 using Tapatalk
TheWolfSVK said:
Im planning to add the elementalx cpu gov.
Click to expand...
Click to collapse
Thanks for responding
That's good news, ima keep running your kernel so far so good everything running smoothly, thanks for supporting our device ! Looking forward to 1.4
Flashed this over v20C, Melina Kernel...it give me some kind of error like
"Updater process ends with error: 1 Error flashing zip /external_sd/zip/H870_v1.4.Marshall.zip"
i dont know why, i wipe cache first...what im doing wrong?!
Good to see another kernel for G6. too bad can't use it on my H870DS.
Great Work sir.
sun_is_shinning said:
Flashed this over v20C, Melina Kernel...it give me some kind of error like
"Updater process ends with error: 1 Error flashing zip /external_sd/zip/H870_v1.4.Marshall.zip"
i dont know why, i wipe cache first...what im doing wrong?!
Click to expand...
Click to collapse
Do you have the H870 or the US997?
ScottThijs said:
Do you have the H870 or the US997?
Click to expand...
Click to collapse
H870.