Problem with Lockscreen? Save Data - Huawei P9 Questions & Answers

Hey,
i got a Huawei P9 (EVA-09) from a friend of mine. She told me, that some day she cant log in anymore. The problem is, without the login i cant save any Data from the Phone. I have searched the internet for nearly one week now an have no clue how to save it. all i can say is, that adb and usb debugging is not enabled... the touchscreen is working i think, because in recovery i can touch the settings. i hope you can help me.
i would upload a picture of the lockscreen but dont know how

Related

TYTN II WiFI would not activate

Friends,
I've been proud of my TYTN II for the last thre months that I've owned it... until recently though.
Last week, my WiFi connection stopped getting activated/swichted on. Howsoever, I may try, it would not get activated, leave alone discover the network.
I tried re-flashing it, soft-resetting, hard-resetting, I mean practically everything I could, but to no avail.
Has anyone faced this problem before, and found a solution to the same. Would appreciate if you could share the same with me. I really do not want to take it for servicing, as I fear it would take me easily a week to get it back if I take it to the Workshop.
Thanks in advance,
Atul
Let me ask a couple of questions.
Can you turn wifi on or do you get an error?
If wifi turns on does it see any access points?
have you flashed your rom on your phone?
have you tried another access point for wifi?
do you have any wifi applications installed like wififofum?
Hi Chumley,
thanks for the prompt response...
I do not get any error, not even any message hen I try to activate the WiFi. Just that the rainbow circle keeps rotating (hour-glass equivalent of indows), and then shows the WiFi is still inactive (small x near the WiFi icon).
I tried re-flashig with the latest ROM available on the HTC website, but to no avail.
Trying another access point does not help either, neither would it, I guess, since its not a problem of signal strength, as much as it seems to be of the Wireless on the Kaiser not getting activated.
No 3rd party applications installed either, after the last re-flashing, still no luck.
Anything from the above, that rings a bell?
If it does it after a flash I would think you have a defective wireless adapater. Sorry.
Guess it should not be a problem as mine is still under warranty... just abt. 3 months old. But my only worry is, as I mentioned in the original post, the time it would tk. to get it fixed by the Service Centre, or if at all it is a correctible problem... I think time to ask for a favour from a friend... a standby mobile while I await mine back
If you let it go free and it comes back, then it's yours forever.
Hello, same problem here:
two days ago my wifi connection stopped suddenly and cannot activate it from the comm manager. When I click in the WIFI Icon, rainbow circle keeps rotating and PDA perfomance goes down.
any ideas :?
Hueznar,
I've already given mine for repair at Service Centre two days back, and am still awaiting it back.
Shall let you know how it goes once I get it back
WiFi would not activate: Motherboard concked off
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Oh My God !!
iatul4u said:
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Click to expand...
Click to collapse
@ Iatul
Are you sure this is the only reason & solution, for I have an IDENTICAL matter of the problem, but I never thought something was wrong with the HardWare..., damn I love HTC
I know I saw this thread too late (and finally) but if you please could respond with any news?
thanx
I'm not sure what is wrong with my Wifi...need help
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Harkadenn said:
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Click to expand...
Click to collapse
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
gelf said:
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
Click to expand...
Click to collapse
ssid? is this in the router menu?
So.. I tried what you said and didn't worked.
I think it has to be something set in the edit options...
Could you help me?
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
gelf said:
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
Click to expand...
Click to collapse
By changing it to channel 1 in my router, it kinda worked..
It says Available now. Nothing else... The connect option it still there button left.
That's my update.
just in case letting you know that I disabled all MEdia net and ISP GPRS so I won't get charged because I'm not paying for my onlince services or any mobile plan with internet.
My brother told me that all WIFI connects directly to internet and it won't matter if I don't have a plan for mobile.
Correct me here, if im wrong.
Thanks.
gelf said:
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
Click to expand...
Click to collapse
Thank you... already tried that... I think my problem is different.

Tracking lost phone?

I have tried using smartphonetracker, and some other gps tracking phone programs. They work great, but heres the PROBLEM:
Useless if device is in sleep mode, or if press the power OFF button.
So if it runs out of battery, or if its turned off, how can I find it by GPS?
Any solution?
sorry, if the phone is off / battery empty - no chance...
i mean, how should it work anyway?! sending a "dead" device the command to boot up and do something?
standby shouldn't be a problem for these programs or they aren't worth the money. i know that kaspersky's mobile security offers this feature. but so far i didn't buy it... (pretty certain it would mess with the system in some ways, make it laggy etc) phonecreeper here @xda should work as well.
oh, one more thing:
all these apps won't prevent a hard-reset or a reflash. in this case you could only disable the IMEI via your provider (sim-card is mandatory anyway) to make it really useless for the thief. (imei-changing is possible and apparently pretty easy, but instructions are pretty hard to find on the web... ^^)
I mean, when it is in standby mode, when u tap power off, then screen goes black.. it doesnt seem to work when its in this mode..
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
caliban2 said:
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
Click to expand...
Click to collapse
By connected to network, u mean internet connection? I want to track my gfs whereabouts, but she doesnt have internet connection on her phone..
Errr, you want to do what?! Oo
Well, I guess that's fine because she knows about it and does the same with your phone, right?
Since when do SMS need an internet connection?

[Q] N7000 destroyed, data recovery?

Hi guys
as you can see in the attached file, i have a litte issue
a friend of mine dropped the phone and a car runned over it lol...digitizer and lcd are gone but the phone still boot up and it is recognized by the computer. My friend don't care about repairs but he wants the data back and here starts the problems:
-adb is off
-phone is password protected (so no kies and no sdcard reading from pc), phone stay in the "insert password" at startup.
-i don't even know if support mhl to attach on a tv
how can i recover the data? The only idea i have is to dump the rom and load it on an android emulator but i don't even know if its possible. Can someone give me a hint to recover the data? Thank you
1) Buy a replacement screen
2) Get the data
3) Sell fully working phone
...
Profit!
that was my idea...my friend do not approve
Jammed_Death said:
that was my idea...my friend do not approve
Click to expand...
Click to collapse
Did you try the S-pen to input the password?
i can't get a precise feedback. I think i'm not pressing the correct numbers and after half hour of wasting time i was looking for other options. Does this phone support mhl? If yes, i have to enable in settings or something else?
Jammed_Death said:
i can't get a precise feedback. I think i'm not pressing the correct numbers and after half hour of wasting time i was looking for other options. Does this phone support mhl? If yes, i have to enable in settings or something else?
Click to expand...
Click to collapse
I dont know qbout mhl, never used it. The phone does support it though.
Another idea might be a usb-otg cable and a keyboard(password entry).
Not sure if that works on a stock rom, but try it.

Need Help for saving my N6

Hi guys, i bought my N6 recently, i was just 2 DAYS with this wonderful phone, just in love with it.... So after JUST 2 DAYS of using, i had an aircraft accident, and on the accident my device "flew" to the aircraft's panel and then broke the LCD ( There are 2 crack's on the phone, one of them seems to be on touch ( i can feel it when i touch it) and the second crack seems to be exactly on LCD, i can see that it is cracked, but a i can't feel it. So my question is, how can i FORMAT my device without using the "screen" ? Do we have an option to format trough USB? I think that my device is working, because i can hear the screen sound locking! As my N6 has a password to power on, i am unable to turn it on and see if my device still can receive calls or to test if still works.... I would like that somebody could help me, just after 2 days of using... In my country, the NEXUS 6 is not available to sell, so i would have to IMPORT the LCD an then make the installation, but before that, i would like to have sure about the phone, if it IS or Not working... Hope somebody can help me, tnks a lot!
Try using Wug's Nexus Root Toolkit. I think it has an option to format your nexus 6. Take care
If you use Google chrome on your pc, enabled usb debugging and enabled "install from unknown sources", then you might be able to operate your phone without a display using a browser app called Vysor.

P20 PRO - Enabling debugging USB on a blacked out screen

Hi everyone.\
My new phone screen has died. It is completely black and being under a month old the supplier has agreed to replace it for me.
The only problem is I would like to back up my data before sending it back as it has sentimental photos of my child's first Christmas.
I thought I had selected- back up to cloud but while checking my gmail account this doesn't seem to be the case, I also didnt select enable usb debugging either.
Because of this, as you can imagine, I can't access my phone via my pc at all. All extraction apps also require the usb debugging to be enabled and because my screen is completely blank I cant do this.
I have tried casting and mirroring my phone too, with the hope of being able to actually see the screen I could select what I need to and then use hi suite to retrieve my data, but again as I cant see the screen I cant give permissions or downloads apps for android etc
I am at a complete lost, and literally have tried everything I can think off.
Please can someone help save the day!
Use usb c to hdmi cable!

Categories

Resources