So I know how difficult it is to find a good screen protector for the Note 8 at the minute, I've tried a few and sent them all back so far.
I ordered the MiiKare glass screen protector, and am pretty happy with it so I thought I'd share it.
I know it won't be the best, but it's the first one I've found that I'll be keeping on my device.
-Price, £8.99
-Packaging, cheap and chinese
-Fitting, easy;
(I did not use the fitting kit device thing, it was awful)
-Fit, good, allows for a case, could be individual cutouts as opposed to one big cut out.
-Visabilaty, 100% clear, very slight "rainbowing"
-Touch Sensitivity, minimal reduction
-S Pen compatability, very good, seemingly unaffected
It also came with a "leather effect" skin for the back, bit fiddly to apply but fine with a bit of patience, it looks OK, prevents scratches on the back when out of case so I'll keep it on, nothing special.
Link :
https://www.amazon.co.uk/dp/B074RB6JC1/ref=cm_sw_r_cp_apap_Zq3gWaWo1yGbW
I completely agree with all the points above. Have used the Miikare tgsp since my handset was released from it's box and no issues so far at all. Would have preferred it to be completely clear as opposed to having black bars top and bottom, but otherwise great for the price ?
Nixher said:
So I know how difficult it is to find a good screen protector for the Note 8 at the minute, I've tried a few and sent them all back so far.
I ordered the MiiKare glass screen protector, and am pretty happy with it so I thought I'd share it.
I know it won't be the best, but it's the first one I've found that I'll be keeping on my device.
-Price, £8.99
-Packaging, cheap and chinese
-Fitting, easy;
(I did not use the fitting kit device thing, it was awful)
-Fit, good, allows for a case, could be individual cutouts as opposed to one big cut out.
-Visabilaty, 100% clear, very slight "rainbowing"
-Touch Sensitivity, minimal reduction
-S Pen compatability, very good, seemingly unaffected
It also came with a "leather effect" skin for the back, bit fiddly to apply but fine with a bit of patience, it looks OK, prevents scratches on the back when out of case so I'll keep it on, nothing special.
Link :
https://www.amazon.co.uk/dp/B074RB6JC1/ref=cm_sw_r_cp_apap_Zq3gWaWo1yGbW
Click to expand...
Click to collapse
When you say "minimal reduction" about the touch sensitivity, do you have to press harder for it to detect input? Specially at the center areas?
gretschpr said:
When you say "minimal reduction" about the touch sensitivity, do you have to press harder for it to detect input? Specially at the center areas?
Click to expand...
Click to collapse
I use s pen probably 90% of the time im using the phone and can honestly say I have no issue on any part of the screen, barely have to touch it and it works perfectly. I did ever so slightly misalign the protector on install though and when using my finger at the top and top corners I do find I sometimes have to press a bit firmer but nothing I'd say was frustrating as it's not that often an issue for me (probably just compounded by the fact my finger or thumb is already reaching for that part of the screen and pressing lighter than I do lower on the screen). Overall I'm very happy and bought a spare as backup (I'll probably try a fresh install at some point but as there's no issue with the s pen, I'm in no rush).
Related
just finished installing my new invisible shield on my HD2. during the process of installing the it, phone did seem to get a bit wet so im going to follow the advice to let it dry out for out 12 to 24 hours before turning it back on. the process of applying the shield is different compared to ones i have bought before. now a small package with a sponge is included and instead of a squeegee a installation card is used which i feel works much better to take out the small bubbles after. the shield fits just right covering the screen and a little extra beyond that. if anything i will update once i have let it dry out a bit and report back on how the screen reacts to the shield being on it and the screen sensitivity to touch.
What version did you buy? I have the Maximum Protection coming in the mail. I am just wondering what the difference between Full body and Maximum Protection is.
Not so good
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
I wanted to ask .. does the full Invisible shield of the HD2 ( screen and the back ) better or the just back only ??
I mean does the Invisible shield of the screen will reduce the sensitive of the touch on the screen ??
please because I want to buy it so which one I buy
just back or the both ??
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
I just bought one on ebay
Look at item, 180488642102 (can't post links since I rarely reply on the forum)
Installation was a breeze and much quicker than a zagg and in my opinion a cleaner look. My buddy wanted one, but didn't want to use their screen protector, so I asked if they would just sell the pieces for the housing. They said yes and all you have to do is buy the screen protector, item 170466295030 and put in the order notes that you want the housing pieces only. I would send them a note first.
This should save some $$$ and you could get the housing protector for around $6.
forelli said:
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
Click to expand...
Click to collapse
I believe that is why they have the New Maximum Protection for the T-mobile HD2. I cant confirm until I receive the one I purchased either Monday or Tuesday. According to the description I thought it said that the maximum protection is supposed to cover virtually everything you would wanna protect and is able to be stretched to cover the extra parts.
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
spoogedemon said:
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
Click to expand...
Click to collapse
thank you
so you advise me to buy it better than the normal Protector like in amazon (Premium Crystal Clear LCD Screen Protector for HTC HD2 ) and it is 5 Pack and 5$ ... but the Invisible shield HD2 24$
Go to zagg.com and see the difference between the two.. The invisibleshield material is stuff that they use on helicopter blades. You cannot scratch it... The cheap stuff on ebay will easily be scuffed and eventually tear..
I've seen some reviews on Zagg's stuff and the screen protector is usually too thick and 'grips' your finger as you try to slide on the screen. Don't know if that's still the case but I went with Bodyguardz again since it was decent on my TP2.
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
dtfast1 said:
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
Click to expand...
Click to collapse
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Pic
Is there somebody who can upload a picture of his HD2 with an Invisible shield on it? Especially the corners.
The HD2 screen is already quite scratch resistant, yes?
well been using the invisble shield on my hd2 for the past day or so and i must say, im not sure if its because of the way i applied it or because it just simply made this way but iv have enjoyed having it on. i dont see absoulutly any hazyness as mentioned before, on my screen. the screen still work great just barely have to touch the screen for it to register my touch. yes u can feel the shield on but, depending on wether u have ur fingers clean or dirty does it make a diffrence when ur using it and how it feels when sliding ur fingers on the screen. also i have noticed i clean the screen less often from dirt and the oil from ur hands, so u get to see less finger smudges on the screen to. also ever since i have the protection on i handle the phone a little more loosely and freely when pulling it out of my pocket. one more thing. for those who have a tmobile hd2 which i do. if u have noticed when u look at the screen mostly during the day in sunlight u can see just barely small dots and lines arranged all over the screen. i can tell they were made to be on the screen because there arranged in a specific order kinda like to register commands and i have noticed that i can just barely see them now with the shield on. makes the screen a lil clearer. i would highly recommended it. this isnt my first device i have applyed the shield on but it certanitly is the device i have been most satisfied with it being on because of its look feel and protection. hope this helps u guys decided on wether to get it or not. also as a last note i only have the screen cover on so i cant comment on the full protection or apparently the new "maximum coverage" shield
kcab87 said:
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
I ordered my Maximum Protection on Wednesday and I am hoping to get it on Monday or Tuesday (and I paid for 2 day Air), I am going to most likely only apply the body pieces and not use the screen protection itself since the glass is really durable if you look at this http://www.youtube.com/watch?v=NcEaehKWr2s and I love the sensitivity of my screen and I know on my Mom's Pre and now her Droid eris as well as my brothers Droid eris, the screen is far from as sensitive once you apply the invisible shield. I will however stick with the product because I love there protection and how it gives you a tacky feeling that make me feel allot more secure with my phone in hand. I will also be taking some pictures and possible a quick video of the Invisible Shield on my device after it is applied (I am still debating if I want to pay Best Buy $7 to apply it for me lol)
This shield is perfect!
Hi,
My husband and I use the invisible shield from ZAGG. And not the full body, because it isn't really full. We have to protect and to see from the outside whos device it is. Skins from ZAGG... this is great. Easy to stick it on and it stays perfectly on. No sticky edges or something. I post some photos in this reply. The skins from ZAGG are perfect...
And we can separate the devices and won't take the wrong device to our work. (at 7.00a.m.)
The invisibleSHIELD is easy installed, but you need a lot of patience and a soft piece of fabric (don't know the right word! Doekje in dutch )
And keep your fingers wet! (oops! 1 picture of our cats!!! ) The pictures are made by the HTC HD2 (european version)
alvinmathew88 said:
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
Click to expand...
Click to collapse
+1 for phantomskinz...I have been using them for awhile on all of my phones.
I have tried zagg and BSE as well and I think the phantomskinz have the least amount of "orange peel" effect and I have noticed zero reduced sensitivity from having it on there.
If you check around on sites like www.retailmenot.com...you can usually find some good coupon codes to save even more money.
...still trying to figure out why they give you two complete sets...not that im complaining, but I upgrade so often...I have never used the 2nd skin for any of the phones I have
On the package, they recommend dipping the skin in a bowl of warm soapy water to apply...I have always had better results using a small spray bottle with the warm soapy water to spray the skin, and using a small bowl to just dip my fingers in.
As an application tip...I have learned that applying them in the bathroom after someone has taken a shower dramatically reduced the chance of airborn dust settling on the phone while you are applying them...just remember to use warm soapy water, keep your fingers nice and wet, lots of clean paper towels or a lint free cloth, and a spare phone to use while drying.
Also...the edges that you have to fold over can be tricky to get down if the skin is still wet. After you get the large flat areas secured down...use a hair dryer and blow dry the adhesive side of the skin to dry it out a bit. the heat also makes the skin much more flexable and easier to shape to the contours of the phone.
Cheers
I have used the 'full-body' protection Invisible Shield, and must say that I am not very pleased with it. The salesperson asked for about 40% of the price to help me apply it. And I figured I could do a job as well as some aunty, and so I did !
And found myself looking at Not-So-Invisible-Shield. There're 3 specks of dust that wouldn't come out even after I unpeeled it and used the sponge provided to scrub it. ANYWAY, the IS doesn't seem to change the sensitivity of the screen much, but it certainly does increase the friction, so swpye-ing might feel a little odd. But I am overall pleased with the product and protection.
At least the two i got from ebay are! makes using some apps and stuff almost unusable, scrolling is almost impossible. I have a screen protector fitted but everything is smooth with my finger.
Anyone else have any experience with using pens?
yeah it works kind of okay when pressing (however you have to press hard sometimes.. also scrolling is indeed impossible. i bought those pens so i could play cryonphysics better but thats a no go
so i wouldnt buy stylus's for scrolling.. or maybe the expensive one's work better? i bought cheap ones from ebay.
stylus
I haven't heard of any that work very good at all! Would be interested if someone finds 1 that really works decent,, Thanks,,,Quig
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=193951
£17 for a piece of plastic is just a joke!
Has anyone got one of these and does it work as well as a finger? needs to be accurate too.
madmackem said:
htcaccessorystore.com/uk/p_htc_item.aspx?i=193951
£17 for a piece of plastic is just a joke!
Has anyone got one of these and does it work as well as a finger? needs to be accurate too.
Click to expand...
Click to collapse
Those ones are a joke as well, barely even works.
i think our device is designed for our fingers
sense is fingerfriendly, even windows explorer can be used with fingers...thanks to our huge screen
so why buying such a crap?
if there's no "cartridge" to put it in, i won't buy it
DN41
madmackem said:
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=193951
£17 for a piece of plastic is just a joke!
Has anyone got one of these and does it work as well as a finger? needs to be accurate too.
Click to expand...
Click to collapse
I have it, it has a plus and a downside. The downside is that scrollng is almost impossible therefore you still need to use your finger. The plus side is that the precission is astonishing. The little red dot does the job you want. You can click on listed links while browsing without zooming in and without selecting the link next to it.
Still it is not worth the 17 pounds.
Also these styli ARE Dagi styli http://www.dagi.com.tw/, since I bought one of these aswell to compare.
They are exactly the same. Same weight, material, length/width/depth etc.
So if you want to buy one. Dagi sells them for around 12 USD a piece.
I'm not able to post any pictures atm, since I'm not at home. If I am I will.
Stylus pens
No pen works very well on the HD2, so do not waste any money on buying one.
The only time you may need a pen, is if you work with gloves on, or wear gloves due to extreme cold weather and do not want to take your gloves off.
I have tried most of them as I spend a lot of time in a walk in freezer. The HTC is no better than the dagi or the cheaper versions from China sold on ebay.
I saw a video somewhere on youtube if im not wrong, it shows how you can make cheap pen for capacitive screens. You have to use and old normal pen, some wire and some conductive foam and it worked fine on the video.
Edit: I found youtube link , here it is
http://www.youtube.com/watch?v=smBOaEP3ut8
Maby it will help someone who need a stylus for hd2.
Best regards. Gjizaqin
It may have to do with hardware evidenced by tests like this one. The HD2's digitizer just isn't designed to be written on in terms of polling rate and sensitivity, so it may not completely be the fault of the pens.
try a sausage... they work well, i am not joking!!
http://www.youtube.com/watch?v=BObqu5CigcU&feature=related
at least its cheap...
There is a cheap stylus that works!!!
I'm not gonna recommend any particular ebay trader over any other, but I've tried almost all the supposed capacitive styluses (stylii?) out there and found only two that actually work.
There's the HTC one with the funny flat clear plastic 'blade' thingie with the dot in the middle of the flat 'blade' to line up the bit you want to interact with. They work, but they are awful (sorry HTC, it's true, patent or no they are still awful!). And way over the top pricing! WAY over the top! C'mon HTC!
And then there's this one: ://cgi.ebay.com.au/3-x-Capacitive-Stylus-HTC-DESIRE-01-Silver-/110537325379?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item19bc89bb43
(and here's where the bit about "any particular trader" comes into it - though the trade with me was just fine). Damn cheap, three to a pack and they actually work. No, seriously, I mean it - they work!
They have a kind of soft blobby rubber bit on the end (much like smooth squash ball material, I guess) that is soft to touch the screen and very accurate and it actually registers every press! Unlike all the other styluses (stylii?) out there, screen touches from this one are actually registered!
And if I need to slide the stylus across the screen, I rub a touch of nose oil (from the OUTSIDE of my nose!) onto the tip. This may just be needed because the screen protector I use is fairly 'grippy', though - it might not have the slide problems used directly onto the glass screen. I usually just use my finger for the sliding bit and the stylus for everything else.
All those hard rubber tipped stylus out there? Junk. All those foam tipped stylus out there? More junk. Pretty looking, in fashion colours, but junk none-the-less!
This is not a paid advert for anybody whatsoever - just my experience from my extensive junk stylus collection... Must find some creative use for them all...
KennyD
I got some off ebay a while back.
Didn't work very well, at all.
Had it bookmarked but link is gone.
kennydadsl said:
tried almost all the supposed capacitive styluses (stylii?) out there and found only two that actually work.
And then there's this one: ://cgi.ebay.com.au/3-x-Capacitive-Stylus-HTC-DESIRE-01-Silver-/110537325379?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item19bc89bb43
(and here's where the bit about "any particular trader" comes into it - though the trade with me was just fine). Damn cheap, three to a pack and they actually work. No, seriously, I mean it - they work!
They have a kind of soft blobby rubber bit on the end (much like smooth squash ball material, I guess) that is soft to touch the screen and very accurate and it actually registers every press! Unlike all the other styluses (stylii?) out there, screen touches from this one are actually registered!
And if I need to slide the stylus across the screen, I rub a touch of nose oil (from the OUTSIDE of my nose!) onto the tip. This may just be needed because the screen protector I use is fairly 'grippy', though - it might not have the slide problems used directly onto the glass screen. I usually just use my finger for the sliding bit and the stylus for everything else.
KennyD
Click to expand...
Click to collapse
Thanks Kenny,
Your feedback is really appreciated!
capacitive pens
I have the one made by Pogo that isn't too bad. It You can do a certain amount of scrolling with it but nothing beats the finger!
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.
I bought an official glass from the oneplus site... I saw somebody complaining it was grey after application. Is it true???
helarctos said:
I bought an official glass from the oneplus site... I saw somebody complaining it was grey after application. Is it true???
Click to expand...
Click to collapse
Mine is definitely not grey, it's a very good quality screen protector, feels much smoother than the plastic one originally fitted and I found that one was a magnet for dust and was forever cleaning the phone. Now I don't have that issue anymore.
My only complaints are it makes it a bit less responsive to swipe down the status bar for notifications and I didn't get it exactly straight at the bottom, it's only a tiny fraction off to one side which is hardly noticeable bit is still enough that when it's in the case you get with the phone if you squeeze the bottom (as you would normally hold the phone to talk) it lifts the glass slightly on one corner and I have to keep pressing the bubbles out where it's lifted, no issue with my karbon case though so I haven't removed it to try and straighten it up I don't want to risk any dust getting in there.
kxf41 said:
Mine is definitely not grey, it's a very good quality screen protector, feels much smoother than the plastic one originally fitted and I found that one was a magnet for dust and was forever cleaning the phone. Now I don't have that issue anymore.
My only complaints are it makes it a bit less responsive to swipe down the status bar for notifications and I didn't get it exactly straight at the bottom, it's only a tiny fraction off to one side which is hardly noticeable bit is still enough that when it's in the case you get with the phone if you squeeze the bottom (as you would normally hold the phone to talk) it lifts the glass slightly on one corner and I have to keep pressing the bubbles out where it's lifted, no issue with my karbon case though so I haven't removed it to try and straighten it up I don't want to risk any dust getting in there.
Click to expand...
Click to collapse
Thank you really much for giving me the information. As for the bubbles, I believe you can use the card to swipe it out. I did that, and it worked.
helarctos said:
I bought an official glass from the oneplus site... I saw somebody complaining it was grey after application. Is it true???
Click to expand...
Click to collapse
If you saw a post about this why did you start a new thread instead of asking in the original thread?
No its clear.. Just make sure you removed the pre applied screen protector and clean it before applying. Practice applying with cheep ones first then buy the oneplus 5t one
Wondered if anyone had done this. I am considering adding a second film protector on top of the pre installed protector from Samsung.
It says be careful of scraping nails on screen and I've noticed that it actually happens often that I scrape a touch of my nail harder than I should.
This seems like a very poor idea. It would affect image quality and might even affect touch sensitivity. I imagine it would just end up pulling up the factory screen protector anyway.
Spinachy said:
Wondered if anyone had done this. I am considering adding a second film protector on top of the pre installed protector from Samsung.
It says be careful of scraping nails on screen and I've noticed that it actually happens often that I scrape a touch of my nail harder than I should.
Click to expand...
Click to collapse
You should install not 1 but 10 or 20 more soft screen protectors in top of the one already applied!
What you need to do is remove the one already applied and enjoy the best quality of your 2k smartphone, if something happens before Dec 2021, pay the 150 and get a new inner display installed by Samsung! Enjoy at least a full year of your phone!
Ive owned both the Fold1 and now the Fold2 and being using them as dsily driver banging the phone around with tools and boxes while i do mechanic jobs! These phones are tank! My wife has long finger nails and never had a single scratch! Lets be honest, who tap their phone with a finger nail? Come on!
My 2 cents! Peace out...
Granted screen protectors are made to flex, the more you stack on top of each other, the less they'll flex. It'll cause it to stiffen and put pressure on the display. Doesn't seem like a good idea lol.
megaghostgamer said:
Granted screen protectors are made to flex, the more you stack on top of each other, the less they'll flex. It'll cause it to stiffen and put pressure on the display. Doesn't seem like a good idea lol.
Click to expand...
Click to collapse
Yeap... that fold line is trouble.
It's also possible the plastic and/or adhesive could be reactive with factory one turning it into a gooey mess over time.
I'm actually thinking of doing this too. I prefer matte screen protectors to the shiny, fingerprint magnet that came with it. Maybe we could have the existing protector replaced with something else at the Samsung store or something.