Database Develop

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app

[KERNEL][26/01]Rhythm Kernel 2.0 *Beta 1*[CM10.1/CM10/AOKP]

Rhythm Kernel:
Based on HydraCore Nirvana Kernel Source as reference
New initramfs (RamDisk)
Kernel Include Siyah Recovery with Dual ROM support! [To be Tested, please report if you test]
Default CPU frequency: 200-1400 MHz (MAX OC up to 1.6Ghz speed!)
STweaks supported kernel => Lot's of tweaks inside
STweaks auto-installed with kernel
Supports CM10.1/AOKP/CM10
Kernel will auto-root device
Massive script for kernel/ROM management (found in Stweaks)
ZRAM can be activated from STweaks (customizable)
Swappiness customizable from STweaks
KSM-control included [Needs to be tested]
GPU tweaks included
Touchscreen customization tweaks [Needs to be tested]
Sound boost controls
CRON Jobs! => Your ROM Maintenance is easy now
Before posting anything, read this:
STweaks options - all may not work. It's WIP.
BLN is not working for now. WIP.
Not many governors as introduced before in Rhythm kernel. To be added later.
This is Beta kernel. Post your reviews with WHICH ROM you using and without spamming and n00b questions.
Any questions like what governors included, how is performance, is feature X included, etc WILL not be entertained. Test yourself.
Download here:
v2.0 Beta 1 -- Not so stable. Need to fix OOM and other values.
Credits:
MaxFu for his Hydracore Nirvana source
Gavin for his Hydracore source!
Gokhanmoral for STweaks app

Reserved for NASA.

Reserved for UNICEF.

Reserved for myself .

Great!! Support support!

Wooohoooooo greaatt neo you brought us a greaaatt kernel I have a question,does this kernel have a same bug with hydracore?

Adhityairvan said:
Wooohoooooo greaatt neo you brought us a greaaatt kernel I have a question,does this kernel have a same bug with hydracore?
Click to expand...
Click to collapse
Which bug are you talking about? Please mention.

neobuddy89 said:
Which bug are you talking about? Please mention.
Click to expand...
Click to collapse
Like a camera bug on TW jb?

Adhityairvan said:
Like a camera bug on TW jb?
Click to expand...
Click to collapse
TW not tested. Any TW user can test and report this.
A developer is nothing without tester.

neobuddy89 said:
TW not tested. Any TW user can test and report this.
A developer is nothing without tester.
Click to expand...
Click to collapse
Hmm yeah you right I'm not on tw right now but I think I will try this on your rom

Re: [KERNEL][26/01]Rhythm Kernel 2.0 *Beta 1*[CM10.1/CM10/AOKP/TWJB/TWICS/MIUI]
Working well on Stunner 2.1.20.
Will report about battery later.
Sent from my GT-N7000 using xda premium

bluheart said:
Working well on Stunner 2.1.20.
Will report about battery later.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks. Any tester for DUAL ROM support ? :highfive:

I just installed it on a new XXLSA installation (the sammobile leak). Couldn't do this with stock recovery (verification error). Had to switch first to Philz 3.99 and in his recovery installed your kernel.
And now booting and waiting...
Waiting a bit too long...

Re: [KERNEL][26/01]Rhythm Kernel 2.0 *Beta 1*[CM10.1/CM10/AOKP/TWJB/TWICS/MIUI]
Great job neo... Looking forward to using this in the future thanks
When God gives you a phone ,you install AOSP on it !

ThaiDai said:
I just installed it on a new XXLSA installation (the sammobile leak). Couldn't do this with stock recovery (verification error). Had to switch first to Philz 3.99 and in his recovery installed your kernel.
And now booting and waiting...
Waiting a bit too long...
Click to expand...
Click to collapse
dont forget to check camera problem:good:

Won't boot on MIUI for now. Will be supported later.

Re: [KERNEL][26/01]Rhythm Kernel 2.0 *Beta 1*[CM10.1/CM10/AOKP/TWJB/TWICS]
neobuddy89 said:
Won't boot on MIUI for now. Will be supported later.
Click to expand...
Click to collapse
Am gonna flash it on UBLS4 for testing purposes.. Its my nandroid hope it's good for TW also... Will let you know
When God gives you a phone ,you install AOSP on it !

Not working on a new and fresh installation of XXLSA. Stopping at Samsung logo while booting.
I'm restoring my GB backup now.
Will try again with one of the next version.

Re: [KERNEL][26/01]Rhythm Kernel 2.0 *Beta 1*[CM10.1/CM10/AOKP/TWJB/TWICS]
Agree with thaidai .
.I got to the "android is upgrading " ..it finished upgrading and then rebooted back and ended in a loop ... So doesn't work on touchwiz ...
When God gives you a phone ,you install AOSP on it !

raghav84 said:
Agree with thaidai .
.I got to the "android is upgrading " ..it finished upgrading and then rebooted back and ended in a loop ... So doesn't work on touchwiz ...
When God gives you a phone ,you install AOSP on it !
Click to expand...
Click to collapse
Thanks reporting. Must be missing service.
Need to install TW myself to fix this. Aww..

[Q] Agni Kernel s3 9305

Hello
I instaled Agni kernel, and everything was ok, until i open the apk GL2sd, first the apk dont work, after that, reeboot, freezes i had to flash stock again...
Its only me, can be solved?
Can someone help me, i would like to put a custom kernel,Agni i have this problema, but boefla works fine whit the apk but is not stable is any one ore for s3 9305?
My rom is stcok I9305XXUEMKC 4.3 whit knox bootloador... already 22 counts.....
thanks

I dont use this app but I can tell you that latest Boeffla is using the 9305 sources and is very stable!!!
Give a try!!!
PS: Saudações brasileiras

dadomonte said:
I dont use this app but I can tell you that latest Boeffla is using the 9305 sources and is very stable!!!
Give a try!!!
PS: Saudações brasileiras
Click to expand...
Click to collapse
I already tried the lastest, but is the same....
Obrigado amigo...

[ROM]THE_DREAMCATCHER-(N7100-PORT)4.4.2(ne2)-STOCK

THE DREAMCATCHER NOTE II PORT TO I9300
THIS ROM IS BASED N7100 (NE2)STOCK- MY PORTING TO I9300
I WANT TO TANK AGAIN @JustArchi, @Kryten2k35 FOR THIS INITIAL PROJECT(PIONEER)
AND FOR OVERLAY FOLDER
You can use this ROM as a base for your ROM
If you decide to do so, you need to include proper information that your ROM is based on MY WORK and leave a link to this thread.
CHANGELOG BETA 1
ROM IS PURE STOCK N7100
BOEFFLA KERNEL 6.0 STABLE FOR MORE STABILITY
AROMA INSTALLER 2.70- FOR LITE/FULL
DATA PARTITION ACTIVETED IN US FOR ADD APP
PRELOAD PARTITION ACTIVETED IN US FOR ADD APP -YOU ONLY ADD SOME APK IN PRELOAD FOLDER AND IT WILL BE FLASHED
SIMLINKED IN SYSTEM/APP-
WITH PRELOAD PARTITION WE HAVE MORE 500MB FOR APP(THIS PARTITION THERE IS IN ANY ROM BUT IS EMPTY
I THINKED TO USE IT FOR MORE SPACE
MODEM ND1 INSIDE ROM
DOWNLOAD
REMOVED
WHAT WORKING
ALL
WHAT NOT WORKING
phone turn on when is in charging
CREDIT AND THANK
@Chainfire for superSU .......... and a bunch of things
@Lord Boeffla for boeffla kernel
Contributors
@nik60
ROM OS Version: 4.4.x KitKat
ROM Kernel: BOEFFLA 6.0 STABLE
Based On: N7100 4.4.2
Version Information
Status: Stable
Current Beta Version: Beta 1
Beta Release Date: 2014-08-04

RESERVED

RESERVED2

No graphical gliched and problem?

Afiqskull5 said:
No graphical gliched and problem?
Click to expand...
Click to collapse
hi
i have in my phone now for test
i didn't see any problem
WIFI DIRECT WORK
WIFI OK
BLUETOOTH WORK FINE WITH MY BLUETOOTH HEADPHONE
SCREEN MIRRORING WORK WITH AGNI KERNEL 4.5
GPS--FIX IN 2/3 SECOND WITH TOMTOM AT THE FIRST TIME
IF YOU HAVE ANY ISSUE ..REPORT ME
THANK

Downloaded going to try
I tried every things works smooth
Unfortunately camera failed!
Maybe working with stock kernel !
Please give me stock kernel link

zaryab360 said:
Downloaded going to try
I tried every things works smooth
Unfortunately camera failed!
Maybe working with stock kernel !
Please give me stock kernel link
Click to expand...
Click to collapse
Camera work fine for me
Try reinstall rom---but before.try delete camera data in setting
i have this kernel now --seems very good
http://forum.xda-developers.com/galaxy-s3/development/kernel-boeffla-kernel-linaro-zzmoove-t2629184
look 4.4 boeffla linaro zip
Sent from my GT-I9300 using XDA Free mobile app

thaaaaaaaaaaaaaaaaanx your man

del

[KERNEL][i9300] Anykernel zips for Boeffla Kernel [UNOFFICIAL]

Hey guys, since there are new AOSP based ROMs around, I decided to help you guys get Boeffla on these AOSP based ROMs.
NOTE: These are builds by @Lord Boeffla, I just extract the zImage and put it in a Anykernel zip
Downloads: https://basketbuild.com/devs/Alectradar/Kernel/i9300
Source: https://github.com/andip71/boeffla-kernel-cm-s3/tree/ng_boeffla12.0
AnyKernel source: https://github.com/Alectradar/boeffla_samsung_i9300_Anykernel

nice.. thanks..
2 questions..
aosp rom is like omnirom, pa rom and nameless rom? and does it support cm12 based rom too?

cangcan said:
nice.. thanks..
2 questions..
aosp rom is like omnirom, pa rom and nameless rom? and does it support cm12 based rom too?
Click to expand...
Click to collapse
Yep, it will work with any 5.0+ ROM.

This works with 5.1.1 Nameless?
Sent for the sweetest Lollipop'd SGS3 i9300

TheTurbanater1298 said:
This works with 5.1.1 Nameless?
Sent for the sweetest Lollipop'd SGS3 i9300
Click to expand...
Click to collapse
Yes

Gokulbalram said:
Yes
Click to expand...
Click to collapse
Awesome. Finally Bofflea kernel on better more stable ROMs. This includes boffela sound and everything works as it should compared to the real kernel?
Sent for the sweetest Lollipop'd SGS3 i9300

Other than extra comparability are there any other advantages?
Sent from my GT-I9300 using XDA Free mobile app

ng1998 said:
Other than extra comparability are there any other advantages?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
This has the stuff as the normal Boeffla

Gokulbalram said:
This has the stuff as the normal Boeffla
Click to expand...
Click to collapse
Just for extra confirmation, does this work on omnirom 5.1.1 also and does it have the sound mod that I can use the boeffla config app to tweak?

ASVP_MSFT said:
Just for extra confirmation, does this work on omnirom 5.1.1 also and does it have the sound mod that I can use the boeffla config app to tweak?
Click to expand...
Click to collapse
Should work fine. But don't flash it after a data wipe, the first boot (after a data wipe) should be on the stock kernel.

MIUI
What about MIUI roms? Boeffla gave bootloops with miui.

Zlatan13 said:
What about MIUI roms? Boeffla gave bootloops with miui.
Click to expand...
Click to collapse
MIUI is 4.4 I don't think many kernels work with MIUI

hay which kernel should i use on blisspop 3.2. and how can I flash it

girish5233 said:
hay which kernel should i use on blisspop 3.2. and how can I flash it
Click to expand...
Click to collapse
You can flash the official kernel from Boeffla.

Gokulbalram said:
You can flash the official kernel from Boeffla.
Click to expand...
Click to collapse
Plz give me direct link

Gokulbalram said:
MIUI is 4.4 I don't think many kernels work with MIUI
Click to expand...
Click to collapse
actually it's 4.4.4 based on aosp roms if I'm not wrong.

Great thread thanks. I have a question. I installed nameless today and boeffla from this thread, if i update with tonight nightly will lose the boeffla kernel?

eldoggor said:
Great thread thanks. I have a question. I installed nameless today and boeffla from this thread, if i update with tonight nightly will lose the boeffla kernel?
Click to expand...
Click to collapse
Yes, you'll need to reflash the kernel

Thanks, man.
Gokulbalram said:
Yes, you'll need to reflash the kernel
Click to expand...
Click to collapse

Hi. I'm triying this kernel on blissPop rom but i have a issue with cifs module. I have enabled it, of course, inside boeffla app but i can't reach my directories. Please can you take a look ?
It's not first time that i have this kind of issues with previous boeffla versions (for ex. with v5.1 (stock rom) cifs module worked, with v.5.2 doesn't ).
Thanks.