I am pretty new with Android.
- Yesterday, I got a black c=screen (the bottom buttons were lighting up, but the screen stayed black).
- I re-flashed with VOL UP + HOME + POWER
- Everything is OK, WIFI works BUT I get a sim card with an exclamation point on the status bar.
- I tried to upgrade to Froyo through the registry hack - no success
- I flashed again - the sim card is still there
- I tried a different sim - no luck
I have a Galaxy S I9000M from Bell Canada. It is Unlocked and Rooted. The soft version is ECLAIR.UGJH2. Firmware 2.1-update1.
I am using it in Romania under Vodafone Romania.
The phone always had a problem of not seeing the network notifications(ex: when you send an sms to a certain number and you get back usage info). All the rest was working 100%
Is the anything I can do to fix this? I can not return the phone in warranty as I am no longer in Canada.
Thank you
MoriokFutai said:
I am pretty new with Android.
- Yesterday, I got a black c=screen (the bottom buttons were lighting up, but the screen stayed black).
- I re-flashed with VOL UP + HOME + POWER
- Everything is OK, WIFI works BUT I get a sim card with an exclamation point on the status bar.
- I tried to upgrade to Froyo through the registry hack - no success
- I flashed again - the sim card is still there
- I tried a different sim - no luck
I have a Galaxy S I9000M from Bell Canada. It is Unlocked and Rooted. The soft version is ECLAIR.UGJH2. Firmware 2.1-update1.
I am using it in Romania under Vodafone Romania.
The phone always had a problem of not seeing the network notifications(ex: when you send an sms to a certain number and you get back usage info). All the rest was working 100%
Is the anything I can do to fix this? I can not return the phone in warranty as I am no longer in Canada.
Thank you
Click to expand...
Click to collapse
I finally found the solution to my issue:
I have never owned a phone where the SIM could be inserted more than the one correct way, and on the Galaxy S it can be placed 180 degrees on itself.
Hello,
I'm on Three UK and recently updated my phone to android 5.02 and since the update my mobile data toggle in the settings is set to off and it won't turn on. Does anyone know how i can fix this
tinogutsa said:
Hello,
I'm on Three UK and recently updated my phone to android 5.02 and since the update my mobile data toggle in the settings is set to off and it won't turn on. Does anyone know how i can fix this
Click to expand...
Click to collapse
Read thru this thread for a possible solution.
Hi all,
I am on B378 which I got OTA.
settings, more, mobile network does not open anymore.
it worked after the update, but after sometimes enable/disable data roaming, the screen closed by itself and now it is not possible to enter this submenu anymore. when i tap on "mobile network" it briefly shows "no service" in the top left corner but the menu does not open. if I tap mobile network again, the whole settings menu will close. This is a pain as I cannot enable / disable data roaming anymore.
any idea?
other wired things I notice with this version is:
-if I disable bluetooth in the settings, it gets gray and it can´t be turned back on. but it works when I activate BT from the dropdown menu
-when the phone rings, it most times shows the name of the previous caller for 3-4 rings and then switches to the actual callers name
I have the same problem. My mobile connection drops frequently since a few days. In the past I was usually a problem with the Access Points, but I can't access the Mobile Network settings anymore. If I try to use the search I can't find the subsettings like "Carrier" or "Access point names".
I'd like to avoid to do an hard reset, also because I suspect I might happen again.
I have the same problem
mayankgpt92 said:
I have the same problem
Click to expand...
Click to collapse
In the end, I had to do a hard reset. Now it's working fine.
This is fixed in the soon to be released B383. I experienced it twice but most recently refused to do a hard reset AGAIN unless i absolutely needed to get into Mobile network settings (so was still crashing)
Just updated to B383 without hard reset and it's fixed.
it just hapened again
after a hardreset which caused lots of configurations to be redone as the backup does not correctly store all the details, settings and rights... it worked for almost 2 month, then, the phone crashed while editing a photo, the photo was gone and so were many settings, 12vs24h clock, screen brightness, screen rotation, battery level in % etc
all this could be reconfigured but the "network settings does not open" problem reappeared. this is really a pain, the phone was working without trouble all the time with Android6 but with 7, this is a nighmare.
Btw the hardreset killed my SD card, which was encrypted. some time after the hardreset, it suddenly asked for the sdcard password and it did not accept my password anymore!? The only possible fix was to use an new SD...I will never encrypt it again.
Were did you get this B383 version from Esist? my phone does not find this update yet?
echo during call
I've P9 with single sim,
the other person hears himself back, (echo) during phone call. On my end its fine.
its not network issue, as I have checked with two different network SIM cards.
any help ? :crying:
I had this on b391. Factory reset resolved.
For the mobile network problem, you don't need to factory reset actually. just change the language of the device and you can access the mobile network menu again (in another language ofcourse).
Omg..this actually works for me..I had problems first with access to wf after to setting and I realize I can turn it on from the dropdown menu ,at the end I was not able to do it even that way.I restarted phone,I opened settings,changed language-and,it works!thanks..
Wow, this was really bugging me and the temporary language switch to French worked . Thanks guys!
I have the same problem with my Honor 8 unable to access mobile data to enable data roaming. Changed the language to French then Spanish and was able to connect without problem, changed back to English and unable to access. Honor helpline ( were brilliant excellent communication prompt response to my messages) after suggesting a couple of fixes has now suggested a hard reset and revert to factory settings. Having read various threads I'm not convinced this will work. Honor must be aware of this problem and I would have thought offered a fix. I think it's a software glitch. I'll try the hard reset and keep you posted.
God bless you guys, had this silly issue while I was trying to get data abroad, and doing another hard-reset was a no-go.
I am NEVER EVER buying anything from Huawei again. Got a Honor 6x one year ago that has only worked nicely for the first month... then tons of issues (slowdowns, crashes, etc.).
Hardware is good, while the software sucks.
Thank you! thank you! 100 times! I switched to Russian - and finally got this hell menu!!! when I change back to the English - I again can't get it. But anyway - at least now I know how I can turn on the roaming!
This language change solution worked in Honor 6x too. Somehow my volte settings were disabled for jio and i couldn't make or receive calls. But changed language to Hindi and then the mobile network opened and i could change the setting. But why is this happening.
Hi
Upgraded to Pie last Friday on EE in the UK on a carrier device so its the EE Firmware.
Prior to the upgrade I have VoLTE on the status bar at the top and since then never shown its face again, anyone else had this?
How did it upgrade via OTA or via Odin and if latter what did you use?
Updated in US and the hack to allow VoLTE (via shortcut master) no longer works. Hopefully a fix (or real update from certain carriers) will arrive soon...
Sounds like Pie isn't fully baked yet.
I'll see myself out.
I'm on EE and have been using Pie for quite a while at this point. VoLTE works fine for me.
Ive been looking for the option on how to turn on and off the option for VoLTE..
The only thing left was the icon on notification bar..
Does anyone have an idea how to get back the option so I can use the service here in Philippines with my current carrier?
Do i need to get back the old firmware?
Your suggestions will be appreciated