OxygenOS Open Beta 28 for the OnePlus 3 - OnePlus 3 Guides, News, & Discussion

Launcher
• Optimized and enhanced application shortcut menu
• Optimized hydrogen window visual style
Gallery
• Add a photo map to view photos by location
• The navigation tab moves to the bottom
• Other experiential optimization
Contact
• Added emergency information to your personal information
system
• Added ation to prevent accidental deletion of photos by third-party apps
• Added support for aptX / aptX HD
• Add wireless hotspot management
• New Recording Shortcut Start Shortcut
• Support for identifying more text messages as cards
• Fix a large amount of white space at the bottom of the Quick Setup panel
• Fix some problems with bus card inquiry and reload
• Fix some of the problem of slow charging of the charger
• Optimize Wi-Fi performance and security
• Optimize battery usage statistics
• Update Android Security Patch
Other problem fixing and detail optimization

Woot! Installing now. Says it has aptX/aptXHD.....

Check your system update.....

Is there some trick to enabling aptX HD? I am going into the Dev Menu, selecting that as the codec, however, seems no matter what settings I use when connecting to aptXHD compatible headphones, it reverts to SBC every time. Anyone else seeing this?

Google Drive Mirror for OP3 OB28
https://drive.google.com/open?id=1ry6y__G_NQRODcVo2mSeGsVpilqF-mrV

Great!

Twrp blu spark by eng stk v.8.54 works.
Clean flash.
Installing Magisk v.14.5 turn the phone off with white led. Leave the phone alone 5-10 sec. Restart to Recovery by power button. Reflash Magisk. OK.
Reflash twrp v.8.54. Reboot to recovery. OK.
Reboot to system. OK.
For me still not working Face unlock. It's grey...

Whats the security patch level? Someone can tell?

MarcTremonti said:
Whats the security patch level? Someone can tell?
Click to expand...
Click to collapse
november

Does the "Cell Standby" Still Drain the Battery???
Please someone confirm.

gsidhom said:
Does the "Cell Standby" Still Drain the Battery???
Please someone confirm.
Click to expand...
Click to collapse
it seems that its been fixed accdg to most guys from oneplus forums

MarcTremonti said:
Whats the security patch level? Someone can tell?
Click to expand...
Click to collapse
1 November. And you can Update it !

Do You have random reboots too?

Kshysiek said:
Do You have random reboots too?
Click to expand...
Click to collapse
Nope

Related

New Update 03 July 2018 : Build No. 311

A new FOTA update has been rolling out to Asus Zenfone Max Pro M1 (both ZB601KL and ZB602KL) on 03/07/2018. The complete changelog (provided by Asus) is given below :
Build No. : 15.2016.1805.311
Update Size : 86.3 MB
Changelog :
1. Improve Camera performance.
2. Update APN.
3. Fix the translation issue.
Since the server pushes update notice to different serial numbers by batches, it may take some days for you to receive the FOTA notice. In the meantime, you may tap “System update” in [Settings] >>[System] to check if there is new firmware available.
For more information, please refer to this link : https://www.asus.com/zentalk/forum.php?mod=viewthread&tid=221547&extra=page=1&mobile=2
Everyone please provide the feedback of the update after installing - if it is a useful update or if it introduced new set of bugs?...
Yes,.. i got the update...!
Now double tap to wake up is working and camera quality also improved..!
They added privacy settings in about phone <- i think its not in previous build.
Added regulatory labels
Added blink light option in display settings <- i dont know what is this
they not included june month patch
ajmalhussainhy said:
Yes,.. i got the update...!
Now double tap to wake up is working and camera quality also improved..!
They added privacy settings in about phone <- i think its not in previous build.
Added regulatory labels
Added blink light option in display settings <- i dont know what is this
they not included june month patch
Click to expand...
Click to collapse
so sad the update dont include june sec patch,it means muktitouch bug still exist
but yes the camera improved( a lot of improvement maybe?)
and blink light option i think its already exist since 309 update its basically just turn on or off the LED(charging led or notification)
Xain121 said:
so sad the update dont include june sec patch,it means muktitouch bug still exist
but yes the camera improved( a lot of improvement maybe?)
and blink light option i think its already exist since 309 update its basically just turn on or off the LED(charging led or notification)
Click to expand...
Click to collapse
oh sorry i didnt noticed blink light option in previous build...! may be i forgot it,..
Any early reviews ?
Aftab_khatri said:
Any early reviews ?
Click to expand...
Click to collapse
Nothing much to talk about. Kind of a useless update.
Still, no equalizer
Sorry but don't know anything about equalizer, but I think double tap to wakeup is not working, I mean the gesture bug is still there?
Also the multitouch bug is still present.
Can't comment on camera performance.
apd55 said:
Sorry but don't know anything about equalizer, but I think double tap to wakeup is not working, I mean the gesture bug is still there
Also the multitouch bug is still present.
Can't comment on camera performance.
Click to expand...
Click to collapse
No, double tap to wake up is working for me..!
Double tap to wake which was working for me till the last update stopped working right after this update for me.
Some apps have stopped working.
The SonyLiv App will crash when trying to play video after the latest update. Prime Video will work, as will YouTube. Lots of work still to be done on the software side.
Hameedhudeen said:
Double tap to wake which was working for me till the last update stopped working right after this update for me.
Click to expand...
Click to collapse
Turn off gestures and reboot and turn on. Its worked
Aftab_khatri said:
Turn off gestures and reboot and turn on. Its worked
Click to expand...
Click to collapse
Hey thanks!
It fixed it.
try to turn off your lockscreen, turn off your gesture (zen motion), restart your phone and then turn on ur zen motion, try it, if its works, turn on your lock screen.
Snapdragon Audio + equilizer is missing after this update
Amal Prabhakaran said:
A new FOTA update has been rolling out to Asus Zenfone Max Pro M1 (both ZB601KL and ZB602KL) on 03/07/2018. The complete changelog (provided by Asus) is given below :
Build No. : 15.2016.1805.311
Update Size : 86.3 MB
Changelog :
1. Improve Camera performance.
2. Update APN.
3. Fix the translation issue.
Since the server pushes update notice to different serial numbers by batches, it may take some days for you to receive the FOTA notice. In the meantime, you may tap “System update” in [Settings] >>[System] to check if there is new firmware available.
For more information, please refer to this link : https://www.asus.com/zentalk/forum.php?mod=viewthread&tid=221547&extra=page=1&mobile=2
Everyone please provide the feedback of the update after installing - if it is a useful update or if it introduced new set of bugs...
Click to expand...
Click to collapse
sumitsen01 said:
The SonyLiv App will crash when trying to play video after the latest update. Prime Video will work, as will YouTube. Lots of work still to be done on the software side.
Click to expand...
Click to collapse
Delete app data and cache and try again. Same for someone for whom bokeh mode is not wprking, just delete camera app data
djfreaky said:
Delete app data and cache and try again. Same for someone for whom bokeh mode is not wprking, just delete camera app data
Click to expand...
Click to collapse
The SonyLiv app is working after deleting Cache and App Data. Thank you very much.
Phone rebooted
Experienced a reboot with .311. This never happened with .309
Is any one checked that Activity launcher is working or not? When I open app crashed immediately. Any solution?
Issues noticed so far:
* Camera flash is disabled except available only in 'Auto Mode'
* Screen Multitouch still lags
* Fingerprint doesn't work many times
Anyone facing battery drains at faster rate after this update? And also skipping percentage?

[ROM] [8/9.0] [Miui based] Revolution OS [Official] [OTA]

About Us:​
Revolution OS provides stock Miui 10 UI/UX experience with useful customizations. Based on Miui Gobal Dev, it provides a smoother experience. Useful customizations from various projects have been added and we always try to help our users.
#revos
For all Miui Lovers, we bring you a Miui 10 based custom Rom with better stability, long battery and superior customizability.
Smoother than EU Rom (according to users).
Credits:​People behind this amazing ROM!
 @BadWolfYe (Owner/Dev/Designer)
 @Nulled_patronxx (Co-founder)​
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group.
** Revolution has no MIUI OS GSI or will have. We do not support ROM'S GSI covers or only give the devices officially supported by us on the web **
>Download<​
Official Web:​
https://os.revtechs.me
Telegram –
1. Group for Support of Revolution OS ROM MIUI (English Users) > https://t.me/revolutionmiuien
2. Downloads Channel > https://t.me/ROSdownloads
3. News Channel > https://t.me/revolutionnews​
Instructions:
-Download the ROM of your choice
-Backup each and every partition from TWRP Recovery (optional)
-Make a full wipe (system, data, cache, dalvik)
-Make a data format (if Rom version is up/downgrading)
-Flash RevolutionOS Package
-Gapps are included in this ROM
-Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience] Clean Flash is always recommended!
ROM Information:
ROM OS Version: 9.x Pie
ROM Firmware Required: None. Included in the Rom
Recovery: TWRP (pie supported)
Based On: Miui Global Dev 10
Version Information:
Status: Stable
Created 2019-05-01
Changelog (Full):
System
New - Base updated to 9.4.18
Optimize - Updated Google Security Patch (2019 # 3) to enhance system security
Optimize - Optimization stereo effects speaker
Optimize - Updated Youtube vanced (now replaces Youtube normal), Google Keyboard and WebView Google
Desk
Fix - Optimized experience to set a password when using a transparent wallpaper
Settings
Optimize - Optimized display grouping homepage
Optimize - Optimize the display of the display list accessibility
Optimize - Optimize the display of the group of home page
Fix - the problem of disabling eye protection mode and adjust the effect of eye protection screen is not dimmed.
Fix - Fix in several languages, the page shows confusion WiFi
New - Add Airtime screen, go to Settings -> Time Experience screen use
New - Added protection probe WIFI
Security Center
Fix - Fixed backup during the virus scan process will restart analysis.
Optimize - Optimize window style application wizard on red below the horizontal screen
Fix - Repair copy risk during the virus scan will restart the analysis
Camera
New - On 18: 6 (full screen the camera)
Optimize - Optimize the beauty and filtering interaction experience
Optimize - Optimize picture modes, portrait and short video for a unified beauty and filter input
Optimize - optimize positional order short video and slow motion
Lock Screen
New - loading screen for all devices
Fix - Problems that a double slash is generated when entering notifications
Fix - Solve the problem that the configuration page of the deleted fingerprint is abnormal
Fix - Solve the problem that the fingerprint authentication is abnormal under the screen after reboot and the screen is off
Fix - Fix the bar drop - down notifications from the lock screen, the load ball does not disappear
Fix - Fixed the problem that the notification bar on the lock screen is abnormal to unlock in the state screen
Optimize - Optimize GPS status bar display icon
Optimize - optimize the user interface and experience of renaming fingerprints.
Optimize - Optimize quick copy of the "Require password once every 72 hours , "
Fix - Fixed the ability to modify and set the password lock screen when using a transparent wallpaper
Fix - after it has been off setting item "Display off Finger fingerprint" fingerprint still it displayed in some cases.
Fix - to unlock and enter the horizontal screen, the display will flash for a moment.
Fix - Solve the problem that the interface of the third lock screen can not display the battery charge cable
Fix - Solve the problem that the password lock screen is displayed horizontally in some cases.
Fix - troubleshoot the lock screen images when the divided space is not configured
Fix - solves the problem that the interface lock screen is not updated on time
Fix - corrects bar drop notifications screen locking the load ball does not disappear
Fix - no minor notifications are solved, but it shows a problem with entry "no important notices"
Fix - solve the problem that the display style dynamic 24 - hour video does not show the image background
Fix - Fix the bottom of the lock screen by applying a third theme shows a messy problem
Optimize - optimize the loading speed of wallpaper to change the mobile phone
Optimize - optimize the experience of unlocking fingerprint: when you unlock your phone by double - clicking the notification message, you can use the fingerprint instead of password to unlock it .
Fix - Solve the problem that the animation is not smooth after the face unlock properly.
Fix - fix the configuration page screen information, problem bending the number of preview image Double clock
Fix - fix update time battery status bar is not appropriate
Clock
New - the ability to freely select a white or black background in the clock setting was added
Optimize - color background clock after this update is white
Optimize - Optimize pages of Life Morning Post related
Network Wizard
Fix - solve the problem that the operation saved as invalid after setting the quota in the package
Album
Optimize - Optimize removal album slow
Optimize - Optimize the slow loading pages album
Optimize - Optimize album thumbnail slow loading problem
FaceID
Fix - In some cases, the message FaceID not go away.
Topics
Optimize - Optimize the sources of the application without restarting
Calculator
New - normal to add a window function small calculator Added
Application Lock
Fix - Fixed some error models display the entry box password lock application
Game Tools
Optimize - Completely updated, support for block device lock, SIM cards, apps, among others.
Optimize - function desktop shortcut for acceleration of the game was added.
Optimize - optimize how acceleration mode of the game.
Fix - corrects the game to answer the speaker, the call duration displays the wrong question
Fix - correction network quick trip to accelerate the click input is not sensitive
Optimize - the new version of the game accelerates homepage and style of the interface is completely new.
Optimize - the toolbox of the game is completely updated, it is compatible with screen lock information, network card switch with one click and other functions
Other optimizations and adjustments
Fix - the problem of user interface the height of the button at the bottom of the interface of the start guide is not uniform
Fix - Solve the problem of the color and size of the operation buttons are inconsistent during startup
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention specific details about the problem. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Thanks for the post. I like it.
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
domenicocortez said:
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
Click to expand...
Click to collapse
You must do a clean installation, since the base is changed, from oreo to pie.
Already clean flash...
Just to install latest version of play store from apkmirror and reboot, everything is ok and updated.
domenicocortez said:
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
Click to expand...
Click to collapse
Although I did not face any such problems. But, nonetheless. Please update whether it did work or not.
Thank you.
There's no problem with play store. Just need to enable gcam. Best miui pie at the moment
Is it possible to allow us to flash Gapps on our own?
I am currently in China and Google is blocked here...So, Gapps is basically junk app here...
Shiw Liang said:
Is it possible to allow us to flash Gapps on our own?
I am currently in China and Google is blocked here...So, Gapps is basically junk app here...
Click to expand...
Click to collapse
No cause it's global based
F2FS supported ?
Is Miui screen recorder included???? I want to record internal sound
Baravan Kurdish said:
Is Miui screen recorder included???? I want to record internal sound
Click to expand...
Click to collapse
Update: Miui screen recorder is available. But, due to Google's policy, it can't record internal sound.
You can always use other apps to do so.
damnsaif said:
You can always use other apps to do so.
Click to expand...
Click to collapse
Ok then it means it doesn't include Miui screen recorder, and No i can't i want to record internal sound and hear it while recording on other screen recorders i can't, i was able to record internal but i couldn't hear it while recording that's why i want miui screen recorder
lelidsn said:
F2FS supported ?
Click to expand...
Click to collapse
No
Baravan Kurdish said:
Ok then it means it doesn't include Miui screen recorder, and No i can't i want to record internal sound and hear it while recording on other screen recorders i can't, i was able to record internal but i couldn't hear it while recording that's why i want miui screen recorder
Click to expand...
Click to collapse
is this one?
camp70 said:
is this one?
Click to expand...
Click to collapse
Yeah that's the one but the name is little different, check the settings and see if you can recorder system sounds only and the other option should be record Mic
Baravan Kurdish said:
Yeah that's the one but the name is little different, check the settings and see if you can recorder system sounds only and the other option should be record Mic
Click to expand...
Click to collapse
It has
camp70 said:
It has
Click to expand...
Click to collapse
Interesting gonna try this rom today, btw how is the battery and performance (gaming)?
Battery not bad to be based on beta. I dont use games
camp70 said:
Battery not bad to be based on beta. I dont use games
Click to expand...
Click to collapse
Ok thanks, u test Antutu? If yes what was the score

Open Beta 16 is out

New beta Oxygen OS update for the OnePlus 7pro
Details
• Type: beta
•OP7P [Open_Beta_16]
Changelog
System
• Optimized adaptive brightness curve. The backlight brightness softer, improving user experience
• Fixed the issue that double tap could not wake up the screen in some settings
• Fixed the automatic pull-down issue with unlock screen in ambient display
• Updated Android security patch to 2020.07
Clock
• Newly added "Lap time" and "Split time" title for Stopwatch, the interface looking more clear-cut
Game Space
• Newly added Moments to store gaming snapshots and screen recordings, please go to three-dot menu at upper right corner>Moments>Recent/Games to find them
Messages
• Fixed the bug of unable to receive wireless alarm notifications within a short time despite repetitious trials
Launcher
• Fixed the abnormal colour display at the top area and button of Notes
Links
• ROM: OP7Pro - Global | https://otafsg1.h2os.com/patch/amaz...13.W.39_OTA_039_all_2007030026_94af698b2d.zip
Did they still forgot to add the one handed mode as in OB15 ?
IlD4nX said:
Did they still forgot to add the one handed mode as in OB15 ?
Click to expand...
Click to collapse
+1
Sent from my GM1913 using Tapatalk
OxygenOS Open Beta 16 OnePlus 7 PRO
2.2 GB (Global)
official download link:
https://otafsg1.h2os.com/patch/amazone2/GLO/OnePlus7ProOxygen/OnePlus7ProOxygen_13.W.39_GLO_039_2007030026/OnePlus7ProOxygen_13.W.39_OTA_039_all_2007030026_94af698b2d.zip
Update Software Manually:
- Download ZIP package to the root of your smartphone’s storage.
(i.e., not in a folder such as Downloads, for example).
- Open Settings and go to System > System updates.
- Tap the gear icon in the upper right corner.
- Tap on Local upgrade.
- Tap the ZIP file to install it.
- Reboot your device
laikexpert said:
OxygenOS Open Beta 16 OnePlus 7 PRO
2.2 GB (Global)
official download link:
https://otafsg1.h2os.com/patch/amaz...13.W.39_OTA_039_all_2007030026_94af698b2d.zip
Update Software Manually:
- Download ZIP package to the root of your smartphone’s storage.
(i.e., not in a folder such as Downloads, for example).
- Open Settings and go to System > System updates.
- Tap the gear icon in the upper right corner.
- Tap on Local upgrade.
- Tap the ZIP file to install it.
- Reboot your device
Click to expand...
Click to collapse
Do you have the apks from the Ob?
jaggillararla said:
Do you have the apks from the Ob?
Click to expand...
Click to collapse
Any apk you want you'll find them in apkmirror.com
gianton said:
Any apk you want you'll find them in apkmirror.com
Click to expand...
Click to collapse
I didn't find the ones from ob16
jaggillararla said:
I didn't find the ones from ob16
Click to expand...
Click to collapse
Wait a couple of days and they'll be there.
Has the blurry elements in some apps been fixed in this one yet ?
danial.aw said:
Has the blurry elements in some apps been fixed in this one yet ?
Click to expand...
Click to collapse
Yes sir
twoxa said:
Yes sir
Click to expand...
Click to collapse
Well I don't know about you but it looks the same pixelated for me... You can notice it in apps like Facebook Messenger and notice the bottom bar ui elements are pixelated
danial.aw said:
Well I don't know about you but it looks the same pixelated for me... You can notice it in apps like Facebook Messenger and notice the bottom bar ui elements are pixelated
Click to expand...
Click to collapse
I know what you're talking about. Looks like it's not beta related. I used to have this issue, last beta I flashed over latest stable, and all good now. I think this could be the reason.
Does anyone know if we will be seeing a stable 10.3.4 soon?
dipleg said:
Does anyone know if we will be seeing a stable 10.3.4 soon?
Click to expand...
Click to collapse
[Updated] OxygenOS release cycle
laikexpert said:
[Updated] OxygenOS release cycle
Click to expand...
Click to collapse
Thank you. So we could expect something by the end of the month then
I still haven't changed my T-Mobile OnePlus 7 Pro to global yet as I don't have a computer. Do I need to change it to global before I'm able to test the betas?
sum_rndm_wht_gy said:
I still haven't changed my T-Mobile OnePlus 7 Pro to global yet as I don't have a computer. Do I need to change it to global before I'm able to test the betas?
Click to expand...
Click to collapse
Obviously you need first convert to international then you can
Sudden Shutdown.
I have been on Open Beta since Android 10 came and updated regularly. Updated to OB16 on the first day (10-July-2020) and today morning I had used the phone for some time and put aside in my car connected to Bluetooth (no streaming, only for handsfree) like I do normally. After about 20 minutes when I arrived I find that my phone does not wake up. No response at all from any button. Even connecting to the charger did nothing. Then held down all three buttons for few seconds (maybe 10) and it entered into bootloader. From there I rebooted into recovery, cleared cache and rebooted. Phone started fine with battery at 97%. I have had the phone since August 2019 and this is the first time it happened. Just reporting it in case anyone faces the same issue in OB16 to see if it is related.
omar302 said:
Sudden Shutdown.
I have been on Open Beta since Android 10 came and updated regularly. Updated to OB16 on the first day (10-July-2020) and today morning I had used the phone for some time and put aside in my car connected to Bluetooth (no streaming, only for handsfree) like I do normally. After about 20 minutes when I arrived I find that my phone does not wake up. No response at all from any button. Even connecting to the charger did nothing. Then held down all three buttons for few seconds (maybe 10) and it entered into bootloader. From there I rebooted into recovery, cleared cache and rebooted. Phone started fine with battery at 97%. I have had the phone since August 2019 and this is the first time it happened. Just reporting it in case anyone faces the same issue in OB16 to see if it is related.
Click to expand...
Click to collapse
This happened sometimes for no reason I don't know why but ob16 is buggy for me like few apps freeze crash . It's open beta we can expect this bug's..
farhan20 said:
This happened sometimes for no reason I don't know why but ob16 is buggy for me like few apps freeze crash . It's open beta we can expect this bug's..
Click to expand...
Click to collapse
Had it happen twice, both time while on phone calls....but to be fair it also happened once on OB15 as well.
Sent from my GM1915 using Tapatalk

General Firmware thread

Check the latest news about FW here:
Release Notes
zentalk.asus.com
Anyone found the .raw firmware for Zenfone 8?
Asus android 12 beta
Android-12-Beta | ASUS Global
www.asus.com
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/OPEN-ZS590KS-31.01.2.7-BSP-user_20210513-release.zip
Android 11 raw image
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/WW__ZS590KS_30.11.51.41_MR0_20210513_release-user.raw.zip
NisseGurra said:
Android 11 raw image
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/WW__ZS590KS_30.11.51.41_MR0_20210513_release-user.raw.zip
Click to expand...
Click to collapse
This zip file contains boot_debug.img that enables adb root access. Is it possible to flash/boot that boot img without unlocking the bootloader?
No idea, i stuck at edl mode right now, need bit help from asus tech
Source codes global (WW):
Zenfone 8|Phones|ASUS Global
A new compact powerful choice: Flagship 5G processor · 120Hz AMOLED display · 4000mAh battery · Pro-grade dual rear and front camera · IP68 water resistant
www.asus.com
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/zenfone8_zs590ks.MR0-30.11.51.41.zip
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/zenfone8_zs590ks.mp-30.10.46.36.zip
Zenfone 8|Phones|ASUS Global
A new compact powerful choice: Flagship 5G processor · 120Hz AMOLED display · 4000mAh battery · Pro-grade dual rear and front camera · IP68 water resistant
www.asus.com
How to update it manually? In case of bootloop we needs the raw image?
Version WW-30.11.51.44
2021/05/21 2.76 GBytes ZenFone 8 software Image:WW_30.11.51.44 for WW/EU/RU/MS Improved Item:
1 Improved system stability
2 Improved system performance
3 Added one-hand mode and guidance instructions
4 Improved fingerprint unlock animation
5 Added Document mode to the ASUS Camera
6 Added capsule-style icon in the status bar for specific scenarios such as phone call, sound recording, etc.
7 Adjusted the opening animation of the front camera
8 Improved camera quality
9 Added priority mode in ASUS Settings
10 Added search function in Force Dark Mode.
11 Enabled VoLTE on Telia (Lithuania)
12 Enabled VoLTE & VoWifi on ICE (Norway) 13 Updated Android security patch
14 Enabled VoLTE on Vodafone (Spain)
15 Fixed issue where ultra durable notification could not be removed
16 Fixed thumbnails issue in 3rd party camera.
Click to expand...
Click to collapse
There is no raw firmware out (yet) and ASUS do not provide it.
NisseGurra said:
There is no raw firmware out (yet) and ASUS do not provide it.
Click to expand...
Click to collapse
The downgrade firmware in Android 12 Beta page actually is a raw firmware
Here is direct link
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/WW__ZS590KS_30.11.51.41_MR0_20210513_release-user.raw.zip
And here are the screenshot what inside the zip file and firmware folder
mickey36736 said:
The downgrade firmware in Android 12 Beta page actually is a raw firmware
Here is direct link
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS590KS/WW__ZS590KS_30.11.51.41_MR0_20210513_release-user.raw.zip
And here are the screenshot what inside the zip file and firmware folder
Click to expand...
Click to collapse
But the actual .raw file is not included so no go to fix bricked zenfone 8
So I can't play with it in case of bootloops we aren't able to restore it back :/
New Update:
[210524]ZenFone 8_WW_30.11.51.50​
【Release Note】
Optimized Phone call quality
Improved camera quality
Improved system stability
Enabled VoLTE on Telekom (Germany)
Enabled VoLTE on Tele2 (Russia)
Enabled VoLTE & VoWiFi on O2 (Czech Republic)
It looks like artifacts in HDR are gone and it looks close to gcam now.
[210603]ZenFone 8_EU_30.11.51.57
【Version】 30.11.51.57 【Model Name】 ZenFone 8 (ZS590KS) 【Release Date】 2021/06/07 Since the server pushes update notice to different serial numbers by batches, it may take some days for you to receive the FOTA notice. Thanks for your patience. You may tap “System updates” in [Settings]...
zentalk.asus.com
【Release Note】
Optimized call quality
Enhanced wide camera contrast and improved ultra-wide camera Night mode for ASUS Camera.
Optimized system stability
Added gesture detection sensitivity in one-handed mode
Added SMS type QR code support in ASUS Camera app
Fixed the problem that some apps cannot be set to full screen mode
Fixed issue which could cause Gboard settings to periodically change back to default values
Fixed Status bar display issue
Enabled VoLTE & VoWiFi on Telia (Norway & Finland)
Enabled VoLTE on MTS (Russia)
Enabled VoLTE on Orange (Spain)
Improved issue where playback of Netflix HDR videos would stutter after a short while.
NisseGurra said:
[210603]ZenFone 8_EU_30.11.51.57
【Version】 30.11.51.57 【Model Name】 ZenFone 8 (ZS590KS) 【Release Date】 2021/06/07 Since the server pushes update notice to different serial numbers by batches, it may take some days for you to receive the FOTA notice. Thanks for your patience. You may tap “System updates” in [Settings]...
zentalk.asus.com
【Release Note】
Optimized call quality
Enhanced wide camera contrast and improved ultra-wide camera Night mode for ASUS Camera.
Optimized system stability
Added gesture detection sensitivity in one-handed mode
Added SMS type QR code support in ASUS Camera app
Fixed the problem that some apps cannot be set to full screen mode
Fixed issue which could cause Gboard settings to periodically change back to default values
Fixed Status bar display issue
Enabled VoLTE & VoWiFi on Telia (Norway & Finland)
Enabled VoLTE on MTS (Russia)
Enabled VoLTE on Orange (Spain)
Improved issue where playback of Netflix HDR videos would stutter after a short while.
Click to expand...
Click to collapse
Anyone else experiencing significant delay in screen waking up then pressing power button after this update?
raimis78 said:
Anyone else experiencing significant delay in screen waking up then pressing power button after this update?
Click to expand...
Click to collapse
My settings: fingerprint > screen off unlock > hide
Pick up phone to show indicator > off
Tap screen to show > off
After update to the new FW, I can unlock the phone with my right thumb, but not with the left one. This worked before the update. I tried adding a new fingerprint, but it did not help.
epaladin said:
My settings: fingerprint > screen off unlock > hide
Pick up phone to show indicator > off
Tap screen to show > off
After update to the new FW, I can unlock the phone with my right thumb, but not with the left one. This worked before the update. I tried adding a new fingerprint, but it did not help.
Click to expand...
Click to collapse
That's not exactly what I mean, you can see video below that pretty much explains my issue:
What I noticed, that delay is about halfed if I use standard Asus launcher, but it's still too slow. With Nova launcher it is as in the video.
ZenFone 8_RU_30.11.51.60
【Release Note】
Optimized system stability
Optimized fingerprint stability
Improved system power consumption

Question OxygenOS 13 Open Beta for the OnePlus 10 Pro

Release OxygenOS 13 Open Beta based on Android 13 for the OnePlus 10 Pro.
Spoiler: OxygenOS 13 Beta 1
OxygenOS 13 OBT1 will be available in IN and NA this time. Due to some slightly different features in each region, OxygenOS 13 will come to the EU in the near future.
OnePlus 10 Pro NA Version (Open Beta 1)
OnePlus 10 Pro IN Version (Open Beta 1)
Spoiler: Changelog (Open Beta 1)
【Design】
Upgrades to Quantum Animation Engine 4.0, with a new behavior recognition feature, which recognizes complex gestures and provides optimized interactions.
Applies real-world physical motions to animations to make them look more natural and intuitive.
Optimizes fonts for better readability.
Enriches and optimizes illustrations for features by incorporating multicultural and inclusive elements.
【Efficiency】
Adds large folders to the Home screen. You can now open an app in an enlarged folder with just one tap and turn pages in the folder with a swipe.
Adds media playback control, and optimizes the Quick Settings experience.
Adds more markup tools for screenshot editing.
Optimizes Shelf. Swiping down on the Home screen will bring up the Shelf by default.
【Seamless interconnection】
Optimizes earphone connectivity to deliver a more seamless experience.
【Personalization】
Optimizes Bitmoji to offer more Always-On Display animations.
Optimizes Insight Always-On Display, with more personalized Always-On Display settings available.
Optimizes Canvas Always-On Display, with more drawing tools and line colors available.
【Security & Privacy】
Adds an automatic pixelation feature for chat screenshots. The system can identify and automatically pixelate profile pictures and display names in a chat screenshot to protect your privacy.
Adds regular clearing of clipboard data for privacy protection.
Optimizes Private Safe. The Advanced Encryption Standard (AES) is used to encrypt all files for enhanced security of private files.
【Health & Digital wellbeing】
Adds Kid Space, providing screen time limit, ambient light reminders, and Eye-protecting display features.
【Performance optimization】
Optimizes Dolby Sound effects with enhanced spatial sound field perception and more accurate sound sourcing.
【Gaming experience】
Upgrades to HyperBoost GPA 4.0 to stabilize the frame rate and balance the performance and power consumption in key scenarios.
Spoiler: Known Issues (Open Beta 1)
There is no response when clicking Capture Log after switching Multiple users/System Cloner/Languages. (You need to switch Multiple users/System Cloner/Languages first before capturing the log in the feedback tool).
A dot will display abnormally when pairing Bluetooth.
The photos might be blurred when taking multiple pictures of people with Ultra Dark mode and zoom out at the same time.
The screen will freeze when taking videos in specific scenarios.
The pictures might not be saved when taking photos of people by zooming out 3.3x.
There will be a black screen when the camera freezes.
The videos might show in green when shot in FILM mode.
The pictures might be black when taking photos in the dark with Night Mode.
Spoiler: Installing
In order to upgrade to this build successfully, be sure that your device is in the latest OxygenOS 12 version (A.15).
These instructions are only for the OnePlus 10 Pro. Please make sure the battery level is above 30% and a minimum of 4GB of storage space is available.
Carrier version devices (TMO/Verizon) aren't compatible with the Open beta builds.
MP version – Stable Official version
DP version – Developer Preview version
OBT Version – Open Beta version
MP to OBT upgrade guide—via Local OTA Update (IN ONLY)
Note: This upgrade method only works for IN version, NA users please refer to another upgrade guide. Please be sure to backup first.
Note: In order to upgrade to this build successfully, be sure that your device is in the latest OxygenOS 12 version (A.15).
Download the latest ROM upgrade zip package from the specified server.
Copy the ROM upgrade package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding installation package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the upgrade is complete, click Restart.
Update successful.
MP to OBT upgrade guide—via Local OTA Update (NA ONLY)
Note: This upgrade method only works for NA version, IN users please refer to another upgrade guide. Please be sure to backup first.
Note: In order to upgrade to this build successfully, be sure that your device is in the latest OxygenOS 12 version (A.15).
Download the latest ROM upgrade zip package from the specified server.
Copy the Upgrade package to the phone storage.
Install this apk . You'll need it to update. Then open the app -> tap the top-right gear icon -> find the upgrade package and tap it -> wait to finish the installation -> tap reboot.
After the upgrade is complete, click Restart.
Update successful.
Source: https://community.oneplus.com/thread?id=1128573883411595264
Spoiler: OxygenOS 13 Beta 2
OnePlus 10 Pro NA Version (Open Beta 2)
OnePlus 10 Pro IN Version (Open Beta 2)
OnePlus 10 Pro EU Version (Open Beta 2)
Spoiler: Known Issues (Open Beta 2)
RCC cannot work normally in this build.
The carrier version (Zain) in Kuwait is unable to send MMS.
The carrier version (Telecom) in North Macedonia is unable to send IMS.
There is no response when clicking Capture log after switching Multiple users/System cloner/Languages. (You need to switch Multiple users/System cloner/Languages first before capturing the log in the feedback tool).
A dot will display abnormally when pairing Bluetooth.
The photos might be blurred when taking multiple pictures of people with Ultra Dark mode and zoom out at the same time.
The screen will freeze when taking videos in specific scenarios.
The pictures might be black when taking photos in the dark with Night mode.
A dot displays abnormally in the status bar.
Spoiler: Changelog (Open Beta 2)
Note: Please be aware that some changelogs here only suit specific regions.
[Aquamorphic Design]
• Adds Aquamorphic Design theme colors for enhanced visual comfort.
• Applies the Aquamorphic Design philosophy to animations to make them natural and vivid.
• Adds a Home screen world clock widget to show the time in different time zones.
• Upgrades to Quantum Animation Engine 4.0, with a new behavior recognition feature, which recognizes complex gestures and provides optimized interactions.
• Applies real-world physical motions to animations to make them look more natural and intuitive.
• Optimizes fonts for better readability.
• Enriches and optimizes illustrations for features by incorporating multicultural and inclusive elements.
[Efficiency]
• Adds Meeting Assistant to enhance the meeting connection and introduces an option to make notifications more subtle and less distracting.
• Adds large folders to the Home screen. You can now open an app in an enlarged folder with just one tap and turn pages in the folder with a swipe.
• Adds media playback control, and optimizes the Quick Settings experience.
• Adds more markup tools for screenshot editing.
• Optimizes Shelf. Swiping down on the Home screen will bring up the Shelf by default. You can search content online and on your device.
[Seamless interconnection]
• Optimizes earphone connectivity to deliver a more seamless experience.
[Personalization]
• Optimizes Bitmoji to offer more Always-On Display animations.
• Optimizes Insight Always-On Display, with more personalized Always-On Display settings available.
• Optimizes Canvas Always-On Display, with more drawing tools and line colors available.
[Security & privacy]
• Adds an automatic pixelation feature for screenshots of chats. The system can identify and automatically pixelate profile pictures and display names in a chat screenshot to protect your privacy.
• Adds regular clearing of clipboard data for privacy protection.
• Optimizes Private Safe. The Advanced Encryption Standard (AES) is used to encrypt all files for enhanced security of private files.
[Health & Digital wellbeing]
• Adds Kid Space, providing screen time limit, ambient light reminders, and Eye-protecting display features.
[Performance optimization]
• Adds Dynamic Computing Engine to improve the system speed, stability, battery life, and app experience.
• Optimizes Dolby Sound effects with enhanced spatial sound field perception and more accurate sound sourcing.
[Gaming experience]
• Upgrades to HyperBoost GPA 4.0 to stabilize the frame rate and balance the performance and power consumption in key scenarios.
[System]
• Improves system stability for some scenarios.
• Fixes an issue where icons would sometimes overlap in Quick Settings.
• Fixes an issue where a panel might be automatically pulled down from the status bar in some cases.
• Fixes an issue that might cause auto brightness to respond slowly.
• Fixes an occasional flicker issue that might occur when your device screen is turned off or on.
• Fixes an issue where the Quick Settings background might appear transparent.
• Fixes an issue where you might be unable to wake your screen by double-tapping it in Guest mode.
• Fixes an issue where your screen might be slow to wake when the Power button is pressed.
• Fixes an issue where the "Other" category might take up a huge portion of your device storage.
[Camera]
• Fixes an issue where the Camera would lag.
Spoiler: Installing
MP to OBT upgrade guide—via Local OTA Update (IN&EU ONLY)
Note: This upgrade method only works for the IN&EU version, NA users please refer to the upgrade guide below.
Note: In order to upgrade this build successfully, be sure that your device is in the latest OxygenOS 12 version (A.15 or A.16). The current Open Beta 1 users will receive this build push gradually.
Download the latest ROM upgrade zip package from the specified server.
Copy the ROM upgrade package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding installation package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the upgrade is complete, click Restart.
Update successful.
MP to OBT upgrade guide—via Local OTA Update (NA ONLY)
Note: This upgrade method only works for the NA version, IN&EU users please refer to the upgrade guide above.
Note: In order to upgrade this build successfully, be sure that your device is in the latest OxygenOS 12 version (A.15 or A.16). The current Open Beta 1 users will receive this build push gradually.
Download the latest ROM upgrade zip package from the specified server.
Copy the Upgrade package to the phone storage.
Install this apk . You'll need it to update. Then, open the app -> tap the top-right gear icon -> find the upgrade package and tap it -> wait to finish the installation -> tap reboot
After the upgrade is complete, click Restart.
Update successful.
Source: https://community.oneplus.com/thread?id=1133627576771149833
Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks.
can I install NA build over latest OxygenOS 12 version (A.15). EU version ?
marko94 said:
can I install NA build over latest OxygenOS 12 version (A.15). EU version ?
Click to expand...
Click to collapse
i switch using rollback to NA 2215 A.12 and than flash the beta
MrScarl3t said:
i switch using rollback to NA 2215 A.12 and than flash the beta
Click to expand...
Click to collapse
not possible from EU 2213 a.15 ?
marko94 said:
not possible from EU 2213 a.15 ?
Click to expand...
Click to collapse
i dont know. i know rollback switching works and is safe with bootloader unlocked so i will not risk it
MrScarl3t said:
i dont know. i know rollback switching works and is safe with bootloader unlocked so i will not risk it
Click to expand...
Click to collapse
I have BL locked, all stock
marko94 said:
I have BL locked, all stock
Click to expand...
Click to collapse
dont switch
you risk bootloop
and brick your phone cus not official software
Do you get to keep your data while updating/rolling back?
rollback no, update idk ill test rollback done
updating to A.15
installing beta. ... ..... ......
Can anyone check if Aux support enabled ??
how to check?
maddler said:
Do you get to keep your data while updating/rolling back?
Click to expand...
Click to collapse
rollback no, update to beta from A.15 yes
Well while there is no MSM tool to unbrick the device it's better to no one test it.
Any one tested yet? How's the experience?
doc.K said:
Any one tested yet? How's the experience?
Click to expand...
Click to collapse
just testing antutu atm
Can't wait so installed on stock IN build.smoother experience till now. Sharing of content looks amazing
Images from Techdroider looks amazing
I found this . Site say international edition.
File is still uploading...
Google translate:
Changelog
brand new design
Added the main screen world clock to display clock information in different time zones Optimize card design, classify and integrate information, and improve information acquisition speed Optimized fonts, more coordinated typesetting, and increased legibility
Efficient and convenient
Added large folders, a new desktop folder experience, one-step opening of applications in the folder, and support for sliding pages Added double-click the power button to quickly display the health code Added media playback center to optimize the operating experience of the control center Added screenshot editing support for graffiti and upgraded graffiti brushes Added support for adding cards on the desktop, providing more personalized information display and enriching the playability of the desktop Upgrade Super Recording to version 2.0, enhance search capabilities, and support exporting graphic data
seamless interconnection
Optimize mobile phone screen projection, support content adaptive screen projection layout, screen projection and mobile phone use do not interfere with each other
personalise
Added various Omoji materials, supports setting contact avatars, and creates more personalized avatars Optimized portrait drawing and shadow screen display, supports multiple brushes and line colors
Security Privacy
Added anti-malicious induced installation application function, supports intelligent blocking of malicious pop-ups and advertisements Optimized private safe, using advanced AES full file encryption scheme to enhance the security of private files
health care
Added children's space to automatically open the eye protection mode to protect children's eyesight Added family space to view family health data, comprehensively protect and care for family members
performance optimization
Added 5G dual-card dual-standby dual-pass function Optimized Dolby sound effects, enhanced spatial sound field perception, and more accurate sound source localization Optimize the openness of the ear canal, jointly build the ear canal capability ecology, and facilitate the access of three-party applications
Game experience
Upgrade HyperBoost GPA frame stabilization technology to version 4.0 to achieve stable frame rate in key scenes, balancing performance and power consumption
一加10 Pro - 一加手机官方ROM - 一加手机官方ROM下载
本站提供一加全机型ROM下载,包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM,全部资源完全免费,不限速,无需登录
yun.daxiaamu.com
Known Issues OOS 13 Beta 1
There is no response when clicking Capture Log after switching Multiple users/System Cloner/Languages. (You need to switch Multiple users/System Cloner/Languages first before capturing the log in the feedback tool).
A dot will display abnormally when pairing Bluetooth.
The photos might be blurred when taking multiple pictures of people with Ultra Dark mode and zoom out at the same time.
The screen will freeze when taking videos in specific scenarios.
The pictures might not be saved when taking photos of people by zooming out 3.3x.
There will be a black screen when the camera freezes.
The videos might show in green when shot in FILM mode.
The pictures might be black when taking photos in the dark with Night Mode.
MrScarl3t said:
rollback no, update to beta from A.15 yes
Click to expand...
Click to collapse
Cool, thanks!
Flashing Beta over A15 EU build worked fine for me, no Problems till now.
but till now I can't tell you anything about battery.

Categories

Resources