Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Important! Remove Huawei "HiSuite" application if it's already installed. It may interfere script running.
C. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
D. Backup data, it might be restore factory default setting especially using downgrade ROM version.
E. Update package will be put in the internal /data partition.
F. Unlock bootloader before flash steps, use unlock.bat in "HWOTA8_Mate10" lock directory.
G. After update successfully, device might be locked again.
H. Get HWOTA8_Mate10 Package (HWOTA8_Mate10_2018052301_Remove_ota_rebrand.zip)
I. Windows10 can't recognize mate 10 fastboot device, see dc-unlocker free registry patch to fix it. (Link)
J. Mate 10 has imei in oeminfo, which is used for unlock bootloder not for system. Run lock/info.bat to see oeminfo IMEI.
Magisk (Thanks to @topjohnwu)
A. Install Magisk by running magisk/magisk.bat and follow instructions.
B. Install Huawei Wifi Fix module (Huawei-Wifi-Fix_v1.0_1500_2018041201.zip), if wifi is not working. [Not Must]
C. Join or dig more information from Magisk forum.
Change Log:
2018052301: Remove ota function, it bricks phone with recent new ROMs.
2018051001: Remove rebrand function, it bricks phone with recent new ROMs.
2018042501: Add BLA-AL00C786 porsche/cn (Not tested).
2018042401: Repack use full compress if update zip failure. Support ALP-L29C636B134 and BLA-L29C636B137 repack.
2018041201: New Magisk v16.3 and WiFi Fix module use 1500 template.
2018031301: Add new brand (no test), ALP: C69, BLA: C55 C109 C771 C782
2018021601: Replace with new Magisk 15.4, add huawei wifi fix module.
2018020601: Support BLA-L29C432B130-log repack.
2018012201: Port Magisk to Mate 10, only test ALP-L29C636B129 pass safetynet.
2018011401: Add new brand (no test), ALP: C02 C40 C109 C212 C346 C432 C605, BLA: C25 C33 C34 C45 C316 C521
2018011301: Support new update-binary
2018010501: Repack add lock bootloader selection, rebrand use huawei function which is more safe.
Nice, glad to see its very similar to the p10/mate 9.
Can this work on mate 10 Pro?
mankindtw said:
Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
C. Backup data, it might be restore factory default setting especially using downgrade ROM version.
D. Update package will be put in SD card.
E. Unlock bootloader before flash steps.
F. After update successfully, device might be locked again.
G. HWOTA8_Mate10 Package (HWOTA8_Mate10_2017120901.zip)
Flash Update
A. Put three huawei update files (update.zip, update_data_public.zip, and update_all_hw.zip) into "HWOTA8_Mate10" repack directory.
B. Run repack.bat to patch three zip files.
C. Use Vol-Dn + USB cable to boot into fastboot mode.
D. Run Replace_Recovery.bat in HWOTA8_Mate10 and follow message instructions.
E. It will reboot and install update automatically.
Click to expand...
Click to collapse
Wow, will give it a try
---------- Post added at 05:29 AM ---------- Previous post was at 04:45 AM ----------
Hope there might be some one who will elaborate Rebranding of Mate 10
k4fari said:
Hope there might be some one who will elaborate Rebranding of Mate 10
Click to expand...
Click to collapse
I'm going to try rebrand.
Its for the first time ever i am unable to unlock the boot loader, i obtained the boot loader unlock code by the following method for my mate 10. Don't know whats went wrong , when i try to unlock the boot loader in fastboot its giving an error. anyone can guide me on this?
Edit: I logout the Huawei Id and also set the usb debugging to Manufacture Mode by using *#*#2846579#*#* and then tried to unlock the boot loader and it worked as a charm.
mankindtw said:
I'm going to try rebrand.
Click to expand...
Click to collapse
Best of luck then.
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
k4fari said:
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
Click to expand...
Click to collapse
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Mm You can not even work on the mate 10 pro?
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Ok got it, now it started to update to 8.0.0.126(c185) the latest one available on ff, i'll post the results after a while.
Regards
it started and the update failed on the phone at 54% whats wrong with me
k4fari said:
it started and the update failed on the phone at 54% whats wrong with me
Click to expand...
Click to collapse
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
mankindtw said:
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
Click to expand...
Click to collapse
Yes i have downloaded the full ota 8.0.0.126 of 2.68 gb of c185 , currently i am on 8.0.0.119(c185)
This one is have downloaded , is it because i skipped 8.0.0.125(c185) ?
k4fari said:
Yes i have downloaded the full ota 8.0.0.126 of 2.57gb of c185 , currently i am on 8.0.0.119(c185)
Click to expand...
Click to collapse
Try other version of c185 ROM to see if it makes any difference.
mankindtw said:
Try other version of c185 ROM to see if it makes any difference.
Click to expand...
Click to collapse
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
k4fari said:
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
Click to expand...
Click to collapse
Don't try, I'll give you another "update_binary" to patch zips.
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
Now update stops at 6% in the phone and shows software insatll fails , i have tried many times with the new update_binary file as well, but no luck :crying:
---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
will the small ota brick the phone by this method?
k4fari said:
will the small ota brick the phone by this method?
Click to expand...
Click to collapse
Don't use OTA-MF, you should use FullOTA-MF zips.
mankindtw said:
Don't use OTA-MF, you should use FullOTA-MF zips.
Click to expand...
Click to collapse
i was using full ota mf 8.0.0.126(c185). but was not able to get any success, i am continuously trying since the last 7 to 8 hours:crying:
check the repack.bat plz
Related
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Phk said:
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Click to expand...
Click to collapse
Hello,
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER+MicroUSB now you can install any stock ROM with fastboot commands and suitable *.img(boot.img, cust.img, system.img)
P.S
What OTA(number) arrive to you?
sokkoban said:
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER
Click to expand...
Click to collapse
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Phk said:
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Click to expand...
Click to collapse
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
sokkoban said:
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
Click to expand...
Click to collapse
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Phk said:
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Click to expand...
Click to collapse
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
sokkoban said:
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
Click to expand...
Click to collapse
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Phk said:
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Click to expand...
Click to collapse
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
sokkoban said:
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
Click to expand...
Click to collapse
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
How to root samsung galaxy y2 smg130h?
halim4 said:
How to root samsung galaxy y2 smg130h?
Click to expand...
Click to collapse
This was actually funny. :good:
Phk said:
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
Click to expand...
Click to collapse
OK
Try this. Use Huawei update extractor in forum xda have link to it. Open the UPDATE.APP and extract the following files: Recovery.img, Boot.img, Cust.img, System.img
Then use fastboot commands to flash B171 ROM
I wish you success!
Regards
sokoban
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Rocketmaster said:
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Click to expand...
Click to collapse
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
sokkoban said:
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
Click to expand...
Click to collapse
I flashed Stock and restarted and flashed B052. What do you mean with hard reset? I not comming in any menu. Only fastboot works.
Still bootloop
Which method use you to flash B052?
sokkoban said:
Which method use you to flash B052?
Click to expand...
Click to collapse
fastboot
Hm, this is very strange!
What device do you have? and which region use?
adb reboot recovery --- says: error: device '(null)' not found
if I try with serialnumber
adb -s W3D7XXXXXXXX reboot recovery ---- says error: device 'W3D7XXXXXXXX' not found
but ---- fastboot devices ----says at the same time: W3D7XXXXXXXX
---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ----------
ALE-L21 Germany
So B170 worked in the first place
Try this method and ROM
May be you must use google translator because tutorial is for Bulgarian people
http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Here's how I fixed it (YMMV). http://forum.xda-developers.com/p9/help/stock-rom-download-t3378806/post66873456#post66873456
I have exactly the same issue from a relock and a lock on EU version.
engineer000 said:
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Click to expand...
Click to collapse
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
I have done same method but I facing update failed after flash update.app did you put then force update ?
itongx said:
I have done same method but I facing update failed after flash update.app did you put then force update ?
Click to expand...
Click to collapse
I only do a force update. Used TWRP to flash the 2nd datafile that have the theme.
Hello to all. here I have a small worries. I have installed the 1st time flight Android no / emui 5.0 not finalize on my p9, i've had the right to many crashes and losses autonomy. then I lead to the shop Huawei to put the b166 this walk ... However, since i've more themes default p9, i've more magazine. and when j'applique another theme this does not work ... if someone that's help m'its would be nice.
edit: I have been able to install the version c432b170 but nothing make no change.
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
ravefolk said:
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
Click to expand...
Click to collapse
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
ravefolk said:
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
Click to expand...
Click to collapse
how about repairing from the PC app from huawei like a PC Suite? Flashrom from TWRP? or forced flashing the zip file. find more on the forums. I already left p9 months ako. im using op3 now
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
khampasith said:
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
Click to expand...
Click to collapse
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
engineer000 said:
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
Click to expand...
Click to collapse
Which one should i download ? The link contain several ones
I have the same problem as well. Hope someone can share clear instruction on how to solve the problem. Thanks
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
masoudshojaei20 said:
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
Click to expand...
Click to collapse
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
lee82gx said:
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
Click to expand...
Click to collapse
Hi....
First you choose Utility in SRK Tools and then choose "install /data/hw_init", on your phone you should accept supersu request and Done!
this is my solution ( made by me ) after trying many solutions over this forum @ other forums
just
1- delete any folder for themes u made (as hw_init or themes in root folder or at any site )
2- make folder & name it ( HWTHemes ) in internal memory
3- download this folder & put it inside (HWTHemes )
4- go to themes app and chose ** Aqua theme ** & apply it
5- no need to change any permissions
this was try on huawei y 7 2017
Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
TWRP, make sure to use twrp_BTV-DL09_5_greatslon.img : https://androidfilehost.com/?fid=817550096634750327 (thanks to greatslon)
Root: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I came from version BTV-DL09C100B006, this is how I did it:
Bootloader must be unlocked, custom recovery installed (Do not install the one for EMUI5 yet, it won't boot).
Enter recovery by adb reboot recovery
Wipe, reboot recovery
Flash ROM + Data
Flash Magisk Root
Flash Recovery again (will be overwritten by the udate)
Reboot, Done.
Download playstore / vending APK from APKmirror: http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-7-6-08-release/ and transfer it on the device.
There is an app called "Downloads" preinstalled (there is pretty much nothing on the tablet, not even a browser after flashing it), you can use that to open/install the play store APK and get things going.
Please make sure you know what you are doing and you know how to recover from a soft brick. I take no responsibility if anything goes wrong.
The version you should have now is BTV-DL09C233B336 with security update from February included.
Thank you very much, and how to downgrade ?
can someone upload a youtube video showing us the the new EMUI5 on this tablet, and give us an overview about the new features and performance?
Beware that:
1) this is a chinese ROM
2) Nougat version 7.0.0
3) if you don't like the downgrade process is difficult
4) if you want to downgrade have to find another ROM!!!
any idea to downgrade please
drlsd said:
any idea to downgrade please
Click to expand...
Click to collapse
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola
2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )
drlsd said:
2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )
Click to expand...
Click to collapse
I attached that I extracted from the same ROM.
nicolap8 said:
I attached that I extracted from the same ROM.
Click to expand...
Click to collapse
Please share your oeminfo if you can. Thank you.
thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?
drlsd said:
thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?
Click to expand...
Click to collapse
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
from europien lte to BTV-DL09C233B336 and now my build verson is NDR90M test-key
nicolap8 said:
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola
Click to expand...
Click to collapse
rom-stock-btv-dl09c100b009-european
https://forum.xda-developers.com/mediapad-m3/how-to/rom-stock-btv-dl09c100b009-european-t3588477
nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
Hi nicolap8 even I followed the same steps as you suggested with the file links you shared and I am also NRD90M test-keys on my Mediapad BTV-DL09
installing Magisk first time gave me a fail message but second time it works like a charm. thanks
could you help, thanks
Switched to eu rom, updated to nougat.. unlocked bootloader and rooted with magisk
But using magisk caused the fingerprint sensor not to work at all and there is no settings for the FP in the settings menu.
Uninstalled magisk and the fingerprint worked again but obviously I lost root.
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Any idea on how to root without compromising the fingerprint sensor?? :/
Half Alive said:
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Click to expand...
Click to collapse
Error? we do not see errors...
Post recovery.log
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
carlo67 said:
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
Click to expand...
Click to collapse
You have more than 600 posts and yet have not understod the rules here???
SEARCH and READ!
Fingerprint Button
Hello, velocity.
Worked for me, thx.
The fingerprint button doesn't work anymore.
Is there a way to activate it (without loosing root by uninstalling magisk)?
Kind regards
veloc1ty said:
Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
Click to expand...
Click to collapse
Those Links are dead. Anyone save a copy? Willing to share? Thanks.
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.
Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.
I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?
Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you
Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!
Hi,
I followed your guide and it works perfectly thanks!
I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Wire1122 said:
I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Click to expand...
Click to collapse
In page 3 there is the new download link. It is a dual sim oeminfo but there if you read a little about it it works exactly fine on a single sim variant too.
https://forum.xda-developers.com/p8...ussion/request-pra-lx1-oeminfo-t3581091/page3
Hope it helped
Ok, but to install a single Sim fw?
Wire1122 said:
Ok, but to install a single Sim fw?
Click to expand...
Click to collapse
It's your choice. In a normal situation that should work too
Can you explain it? I must flash oeminfo through twrp and then?
Wire1122 said:
Can you explain it? I must flash oeminfo through twrp and then?
Click to expand...
Click to collapse
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
not working only bootloop
Wire112233 said:
not working only bootloop
Click to expand...
Click to collapse
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
GedeonTaylor said:
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
Click to expand...
Click to collapse
right but downloading b170 rom. I want b171 single sim not b170 dualsim
GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
The pra does not tolerate such flash orgies. Or did you test it before posting?
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
chinhon, can you guides me to correcrly install b171 fw?
Wire112233 said:
chinhon, can you guides me to correcrly install b171 fw?
Click to expand...
Click to collapse
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
not working, after Huawei logo the smartphone reboot itself such after a factory reset
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Yes, I did..
surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
ChinHon said:
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
Click to expand...
Click to collapse
I don't understand the PRA myself..I've soft-bricked mine a couple of times and have recovered using different methods and not one foolproof way.
Can I flash stock fw with twrp?
No, unless someone has a backup for you. Take the K-Rom v. 3.3 and make it unroot. Then you have a stock rom.
Hey guys, now it's time for eRecovery!!