Hi everybody,
I'm wondering if anybody already tried this...
Few days ago I ordered original back cover for Nem-L22 which has fingerprint "hole" and the fingerprint sensor.
I have a Nem-L51 so no fingerprint and I want it
Hardware L22 and L51 should be 100% the same exept for the sensor which is connected or not.
Then it's all firmware stuff and I already seen that there is a specific folder to delete or rename.
Somebody already tried?
Regards,
Matteo
If nem-l52 doens't have FP, you can not get it with software alone then
Related
Hello i found out my N1 Proximity sensor have issue wen a install 2.3.3 my screen shutoff when i do call and stuck blank screen i have to remove the battery and put the back.
i download Elixir App and doing some test and Sensor only Say "NEAR" I put my hand on the screen still say Near...
/etc/permissions
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
/system/lib
libssensorservice.so
Factory Code Nexus One
#*#0588#*#* Proximity sensor test (no work in my N1)
can i restart the sensor?
can i disable Proximity in DIAL ?
do i need to take tHTC Support N1?
where is the CM3602 on N1?
can i fix my self?
and I have the same problem but no answer :-(
___
http://forum.xda-developers.com/showthread.php?t=707234&highlight=nexus+proximity
Hi,
Have the same issue, too !
hmm, looks like a android 2.3 issue on that one....
The same here. Is there any way to do a downgrade to 2.2? The phone is unusable, I'll have to go back to my old Nokia!!
Also, at the same time, when I plug the earphones on the Nexus, it doesn't detect them and continues playing through internal speaker!! And I suspect that the light sensor doesn't work.
Hasta luego.
Nexus one proximity sensor problem
Hi guys i had the same problem with my phone
and I manage to fix it
I open the phone and check where the proximity sensor was
and clean it with the a spray duster they sell in computer store
I clean the entire phone
put i back together and it was fix
thanks me if it works for you like that
You are lucky,, just opened my phone and cleaned the proximity sensor and light sensor with specialized electronics solutions i borrowed from work and nothing happened,,dont know what to do about it
RE: how to disable proximity sensor
hey there, this is my second post, THIS PLACE IS AWESOME!!! I was able to disable my nexus one proximity sensor using the hex edit method (after granting the app root access) and now a brick to be is no more. thank you to the poster who made the original post and the one who mentioned the way to give hexedit root access. my sensor definition was exactly where he said it would be. the name of course was cm3602 (lowercase, looking for uppercase found nothing) I was able to change hex position 0000323d from 32 to 00 , and poof, no more black screen after dialing or when receiving a call. a temporary solution I was using was to use a bluetooth headset.
Thank you all.
Hi,
Is there any way to buy a Sony IMX258 sensor to replace camera sensor?
magnus48 said:
Hi,
Is there any way to buy a Sony IMX258 sensor to replace camera sensor?
Click to expand...
Click to collapse
http://www.dragon-tt.com/ check there
ReDuXX528 said:
http://www.dragon-tt.com/ check there
Click to expand...
Click to collapse
I did'nt find it here. Thanks anyway!
s.aliexpress.com/AjUjUnEF
Tell me if it works and i will buy one too...
zedamoca said:
s.aliexpress.com/AjUjUnEF
Tell me if it works and i will buy one too...
Click to expand...
Click to collapse
Maybe it's an omnivision sensor... it's not guaranteed that this sensor is sony IMX258
The serial number is from a Sony sensor.
And? is anybody manage to do it?
I still have the IMX258 with me! Anyone wants to buy , PM me.
It did not work for me.
I replaced the sensor:
A0 0-FILM WH273 (Kernel Menu: Version Back Camera: ofilm_s5k3I8)
with this one
OHP0240 A0 0-FILM WG493 (Kernel Menu: Version Back Camera: Not support)
Perhapse also ROM related?
The Phone is on MIUI 9 Global 7.9.15 Beta
Re-flash your ROM so your phone use the correct driver .
Robert- said:
Re-flash your ROM so your phone use the correct driver .
Click to expand...
Click to collapse
Sadly no difference after reflash. Took the fastboot file from here. http://en.miui.com/a-234.html
Any other ideas ?
I wish someone would reply. A $10 sony sensor is a worthwhile upgrade to this phone.
Maybe double check that the connector is seated properly. Maybe you need to install the correct driver manually. Regardless, this needs to get more attention!
Did you try using a custom ROM such as LineageOS?
Yes, installed the following:
https://forum.xda-developers.com/re...other-development/rom-lineageos-14-0-t3566095
Also installed the firmware.
Does anyone know how the ROM detects the different hardware settings of the phone?
I think xiaomi uses at least three different camera sensor types.
Sounds like a great idea to replace the sensor. I hope some smart XDA members figure out how to load the camera drivers after swapping sensors.
I changed camera sensor.
I succeeded in converting from Samsung to Sony.
@junyajunya
can you post us where you bought the sensor and what is writen on it?
Anything you had to do, so that the sensor could be used?
in aliexpress I bought 32824022365
you can find 32824022365 in aliexpress.
I can not write URL.
because I am new.
and just change.that's all.
ttps://photos.app.goo.gl/zInF918nKehesH153
left samsung
right sony
ttps://photos.app.goo.gl/Gotrjs1lwnDf4GQm1
@junyajunya
Thanks for the pictures.
On the Sony camera modul mine is missing the QR Code. Guess it is some other brand
https://www.aliexpress.com/item/Bac...g-Camera-Module-New-Original/32824022365.html
GoldenBadger said:
Yes, installed the following:
https://forum.xda-developers.com/re...other-development/rom-lineageos-14-0-t3566095
Also installed the firmware.
Does anyone know how the ROM detects the different hardware settings of the phone?
I think xiaomi uses at least three different camera sensor types.
Click to expand...
Click to collapse
3 different back camera sensor
I saw something like 2 different front camera sensor but not sure
Was it a clean install? try to wipe everything before flashing
I have Note8. It has a very strange sensors error, as below:
- All sensors, from proximity sensor, light sensor, to GPS, iris scanner, and all the other sensors do not work at all.
- In the app like Phone INFO Samsung, CPU-Z or AIDA64, in the Sensors section, all sensors do not work.
- The Auto Brightness function does not work (due to the light sensor), the brightness of the AOD screen is also not adjustable.
- When making a phone call and move the phone close to the ear, the screen does not turn off due to proximity sensor.
- Auto Rotation function is not working (due to rotation sensor).
- Google Maps shows inaccurate location. Other apps that rely on GPS (such as the speedometer app) are completely not working.
- The iris scanner function does not work either.
It was about two weeks ago. I've Wiped the cache, restart the phone but does not make sense.
Yesterday it suddenly returned to normal, I don't know why.
But today - while I'm typing this post - all sensors suddenly do not work again.
Any idea about the error and how to fix it?
Thank you guys
Best advice I can think of is to factory reset and see if that alleviates the problem.
If you did not do anything firmware-related, or you did not drop or submeged your device, the best you can do is to make a warranty claim, pure and simple, if you have no way to make such claim, well, next time you should consider getting a device from an official source
I've read other users have had same problem. Ones I read said it was motherboard issue had to have sammy replace it.
Thank you guys
There is also built-in sensor test. Open dialer and dial *#0*#
I noticed a problem when I was playing Asphalt (racing game on me Note 8). I am unable to use the Tilt controls to move the scar.
Testing out the Sensors using *#0*# at the dialer revealed that all the SENSORS was faulty.
I reset the whole phone just now. The issue is still there with the sensor. As expected Auto rotation doesn't work.
Running the latest version 8.0.
I recently changed my motherboard (under warranty) 3 months back cos something was faulty. Seems it may be another motherboard issue.
Anyone else in this thread solved the issue?
Hey everyone I'm facing the same problem. All sensors stoped working but they were working before on 7.1.1 and i updated my device to oreo and realized all sensors stoped
Then i got another updated for about 900mb i thought maybe this update will fix them and also that update said tha after updating the user cannot downgrade to nougat but after updating the problem still exsist. Please if anyone can help i also try to flash same oreo firmware with odin but doesn't fixed the sensors
Hello.
I replace screen on my P30 pro on official Ukraine Huawei Service, but after this fingerprint in screen didint work.
If I try add new fingerprint phone say error "Registration error".
Official service cant solve this problem.
Please let me know why need for solve problem? Thank you
Sounds to me like Huawei have done exactly the same as apple have done and used and encryption method to lock the specific reader to the board. I havnt had a p30 Pro or p30 apart yet but I belive other phones with in screen finger prints can be swapped
Sent from my VOG-L09 using Tapatalk
I have so similar problem. Just disable authentification at all (even PIN, FaceId, others). Then turn on PIN and add new fingerprints. Worked for me.
chaketik said:
I have so similar problem. Just disable authentification at all (even PIN, FaceId, others). Then turn on PIN and add new fingerprints. Worked for me.
Click to expand...
Click to collapse
I got p30 screen replaced with original support pack and can't get fingerprint to work.
Any more ideas?
Cheers
Need calibration. Used to work for a huawei repair centre but never see this problem.
In huawe centre they have an app to calibrate the fingerprint
Does anyone know what is the compatibility trick behind Huawei P30 Pro fingerprint sensor?
I have got issues with mine.After screen replacement it worked fine,until the microphone stopped working at the bottom board.So i went for a new one.And there the fingerprint issue started.I cant enroll a fingerprint.
I went for another board,new sensors,new main flex.It simply does not work,recognizes it,but does not work.Calibration tools and softwares did neither work.Tried to update/reset,also unsuccessfull. Actually it worked perfectly once,read the fingerprint perfectly,but after restart did not work again.
So,i am stuck... I know in the past i have replaced screens and sensors on P30 and P30 Pro without similar issues.
Is there an trick or must i bring it to Huawei centre to pair the hardware?
Hi,
Did you find a solution for this issue yet? I'm about to replace the fingerprint sensor, but cannot find how I can calibrate the fingerprint sensor afterwards. There seems to be some software app by Huawei which can start the calibration proces but it's nowhere to be found.
Anyone?
jagermeister1 said:
Hi,
Did you find a solution for this issue yet? I'm about to replace the fingerprint sensor, but cannot find how I can calibrate the fingerprint sensor afterwards. There seems to be some software app by Huawei which can start the calibration proces but it's nowhere to be found.
Anyone?
Click to expand...
Click to collapse
Hi
I got issues on my fingerprint sensor after replacing my screen, and all i needed to do was reflashing original rom.
It works perfect after.
joaofbc said:
Hi
I got issues on my fingerprint sensor after replacing my screen, and all i needed to do was reflashing original rom.
It works perfect after.
Click to expand...
Click to collapse
Is that possible without root?
joaofbc said:
Hi
I got issues on my fingerprint sensor after replacing my screen, and all i needed to do was reflashing original rom.
It works perfect after.
Click to expand...
Click to collapse
Great for you, i will try that for sure in the near future, but can you please explain what do you mean by original rom? The one that was first on the phone when was sold? Or you used emui 12?
ivica122 said:
Great for you, i will try that for sure in the near future, but can you please explain what do you mean by original rom? The one that was first on the phone when was sold? Or you used emui 12?
Click to expand...
Click to collapse
Did you figure it out?
Well, i was waiting to get answer from joaofbc but no answer, i didn't try anything on my own, i use phone daily and didn't want to mess it, but face recognition is working fine so i don't care about fingerprint that much.