Hello I tried installing TWRP, but I downloaded the one for P10 lite instead of P10.
now my phone is stcuked in the screen that comes after Huawei logo, that says my device has been unlocked and can´t be trusted and that is booting; but it does not boot.
I already tried Vol+, Vol- and power; but it restarts to the same screen.
I have waited until the battery was dead and the plug it to pc with Vol- pressed, but it comes to the same screen. so I can´t flash anything or enter recovery or fastboot mode.
Can anyone help me?
Related
Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
silencerxo said:
Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
Click to expand...
Click to collapse
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
christrodr said:
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
Click to expand...
Click to collapse
Thank you,
I was trying to do it without plugging it in.
I managed to flash a recovery.img and a boot.img extracted from some (older) firmware from some Russian site and it booted like a charm.
Thank you
I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:
SnakeX020 said:
I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:
Click to expand...
Click to collapse
Your phone isnt dead at all, it's just a softbrick which maybe be cause by alteration of system files.. switch it off, and hold down a combination of keys that will boot your phone into recovery mode, and wipe all data..but before that make sure you create a backup of your device or dont if you have it on your google account. And for Huawei i think the right combination of keys is to hold down both volume buttons + Power button until it boots you into recovery mode..or you can just flash a stock rom of your phone.
hint: google how to boot huawei p10 into recovery mode
Hello, I´m trying to boot into bootloader, I´m stucked in a loop in the screen that says my phone can´t be trusted.
If I plug it to the PC it goes to that screen, I can´t power off and if I try to plug it with vol- and then plug the USB cable it goes to the same screen.
Is there any other way to get into bootloader or download mode? I can´t get out of that screen it keeps rebooting onto it.
I already waited until the battery was dead, thinking I would be able to plug it with vol- pressed, but again goes onto the same screen.
My bootloader is unlocked.
Hello,
After restoring the factory settings from the RROS ROM, the whole system fell. It pauses on the Honor screen.In fastboot & rescue mode I have information phone unlocked.When i try to uploa system through ADB, the phone continues to loop on the Honor logo.
I also tried to upload the update.app file to the DLOAD folder onto the micro SD card, but after pressing the VOL + VOL- and power button nothing happens - the Honor logo still remains. Please help me to fix my phone :/
Creeq554 said:
Hello,
After restoring the factory settings from the RROS ROM, the whole system fell. It pauses on the Honor screen.In fastboot & rescue mode I have information phone unlocked.When i try to uploa system through ADB, the phone continues to loop on the Honor logo.
I also tried to upload the update.app file to the DLOAD folder onto the micro SD card, but after pressing the VOL + VOL- and power button nothing happens - the Honor logo still remains. Please help me to fix my phone :/
Click to expand...
Click to collapse
pressing the VOL + VOL- first,and keep.Then press the power button.Keep and wait till the screen is on,then Release the power button.!!#!!Your should not release the vol+and - until the honor logo disappear and the recovery or fast boot (may be a white background with a Android) mode is ready.You may need to keep pressing the volume for 10 mins or more.Just be patient and wait!
The fastboot is always available, unless the hardware is failed!BTW,Huawei fast boot need keys to unlock.As you have RR on your device,you may unlock it before.
HUAWEI P9 PLUS VIE-L09
VIE-L09C627B160
This C627 is apparently branded by a company in Korea and has an LGU+ overlay, there is no update beyond B160 (EMUI 4.1.1, Android 6), I need an update to use a Volte simcard. My goal was therefore to rebrand it in the European version C432.
1. I used DC-unlocker to unlock the Network and get the Bootloader code. It worked.
2. I used the SRK Tool to Unlock the Bootloader. It worked.
3. I used SRK Tool to Install TWRP for Marshmallow. I unfortunetly did not launch TWRP, the process worked but I think that it was a fail.
- Important to know, after 1 or 2 (I don't remember which one) there was an EMUI update or reset and the display asked unclearly to remove sdcard and usb and to put them back in 2 minutes, I did not react and I think that it did not go to the end after this I had to shutdown the phone, it did a factory reset by itself and seemed good.
4. I tried to root the phone with SRK Tool but after the process the boot was freezed at the message with something like "Your device is booting..."
5. That when I understood that TWRP was probably not correctly installed and I tried some stupid things with SRK :
- I tried to install TWRP and the original recovery.
- I tried the root again.
- Finally I tried to relock the Bootloader...
6. After reboot my phone is now blocked in a LOGO LOOP.
- I can not shut it down.
- If I press the power button for a long time it restarts but stay at the Huawei logo.
- If I wait for the battery to discharge it always boot to the Huawei logo when I plug the USB cable.
- Sometimes if it was discharged longer it goes beyond the Huawei logo to another logo (LGU+) and reboot in a loop.
- If I try to push Vol- + Power, or Vol+ + Power, or 3buttons, there is just a reboot.
- There is no Firmware for my device but I tried to put a full EVA-L09C432B182 on an SDCARD in dload and there is no reaction to the 3 buttons reboot.
So no Fastboot, no TWRP, and no forced update.
The only time where my computer connect to the phone for 2 seconds is when I boot up after a long discharge and I see the LGU+ logo. But just after it reboot. And trying to launch fastboot from this situation don't work too.
Do you have any solution ?
UPDATE :
After discharging the phone completely and plugging it back to the charger it starts on the OS but I still don't have Fastboot, erecovery or anything else. If I reboot it it switches to Logo Loop and I have to wait for unloading.
Do you know how to factory reset or flash from Debugging without reboot ?