My zuk z2 pro went into test mode and I can not get out
Help
I have the same problem. I cannot even touch the buttons at the bottom, which is very annoying :/
Please see this post
phoenixrap said:
My zuk z2 pro went into test mode and I can not get out
Help
Click to expand...
Click to collapse
I don't enter in the fastboot mode. The phone is blocking in mode FFBM and I can't touch de bottoms on display
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
JBoy53 said:
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
Click to expand...
Click to collapse
UPDATE: TWRP 3.0.3-0 saved my ass. It permits selection of booting into EDL (9008) mode, bypassed all the PC based commands that weren't working, and I reloaded Zuk factory ROM again. Got past the test mode screen finally. Discovered that I don't care for the original ROM at all, too many Google things I'm accustomed to (Like Google Play store) missing. Added a few things back in, but wasn't worth the trouble. It took me about 15 minutes to refla sh it using TWRP with the latest nightly version of the Mokee ROM for this device (Android 7.1.2) and it works GREAT. Lineage wasn't ready yet.
The only hold over from all my initial problems is that upon boot it acts of if I'm doing the up Vol button action. It goes to the screen where I can press a Vol button and go into the boot loader or just wait 5 seconds for it to carry on booting normally. I don't know how to correct this, but not really a problem.
Link about TWRP 3.0.3-0 -
HTML:
https://forum.xda-developers.com/zuk-z2-pro/development/twrp-twrp-3-0-3-0-teamwin-recovery-t3529601
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Works fine.
I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:
SnakeX020 said:
I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:
Click to expand...
Click to collapse
Your phone isnt dead at all, it's just a softbrick which maybe be cause by alteration of system files.. switch it off, and hold down a combination of keys that will boot your phone into recovery mode, and wipe all data..but before that make sure you create a backup of your device or dont if you have it on your google account. And for Huawei i think the right combination of keys is to hold down both volume buttons + Power button until it boots you into recovery mode..or you can just flash a stock rom of your phone.
hint: google how to boot huawei p10 into recovery mode
Hello I tried installing TWRP, but I downloaded the one for P10 lite instead of P10.
now my phone is stcuked in the screen that comes after Huawei logo, that says my device has been unlocked and can´t be trusted and that is booting; but it does not boot.
I already tried Vol+, Vol- and power; but it restarts to the same screen.
I have waited until the battery was dead and the plug it to pc with Vol- pressed, but it comes to the same screen. so I can´t flash anything or enter recovery or fastboot mode.
Can anyone help me?
Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck
GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok
persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa
GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img
GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found
GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !
Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/
You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.
Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?
Hello
Came to me a Huawei Mate 20 line SNE-LX1 with passcode and of course frp locked(also BL Locked I suppose) After factory reset as usual (power plus vloume up to enter recovery then wipe cache and wipe data) I try reboot but phones reboot in erecovery and not system. I try different flashes( most probably I misunderstand flashing procedures) with sd card and adb but phone doesnt accept flashes because doesnt allow anything since frp and bl is locked
Any sugestion please
Try to use download mode, you can download and flas the last firmware.
Download mode
--------------------------
Turn off mobile.
Then start pressing Volume Down and Volume Up for a short while.
While holding these keys connect your phone to computer by using Type C USB cable.
giancaleone said:
Try to use download mode, you can download and flas the last firmware.
Download mode
--------------------------
Turn off mobile.
Then start pressing Volume Down and Volume Up for a short while.
While holding these keys connect your phone to computer by using Type C USB cable.
Click to expand...
Click to collapse
I tried that software update failed. I downloaded firmware from this forum when I try holding volume buttons and connecting ctype caple. it stuck in 5% for while then restarts