Database Develop

*MULTI-TOOL**UPDATED* 11-12-14 Moto X 2014 (XT1095) Pure Edition Multi-Tool

Tool has been updated and is now a Multi-Tool. See below for added options.
---------------------------------------------------
*****Tool updated 11-12-2014 to V-4.1 - All images and modem have been updated to stock unrooted from motorolas firmware release for the xt1095 for both full wipe and no wipe options. Also added option to install Lollipop OTA update (thanks graffixnyc)********
ROOT option for 5.0 has been added. (Chainfire is a god among men)
Perm TWRP install for 5.0 option is also added.
I made this for my own personal use , but figured I'd share. I take no credit for the recovery images in this tool. I just put everything together in a simple tool. This is a simple one click recovery flasher and also a means to gain root. The tool will push the SuperSU update zip to your phones internal storage. You can then flash the TWRP (thanks Dees_Troy). After twrp is flashed the tool will then reboot you into recovery so you can flash the SU.zip to gain root. If you choose, you can then flash the stock recovery.
For L root you must have updated to L and must have USB debugging enabled. Phone will reboot to boot loader and then boot chainfires custom boot.img.
*****"Please be intelligent and only use this if you have a Pure Edition Moto X 2014 (XT1095) and have already unlocked your bootloader. I assume no responsibility if you cant read or follow instructions.*****
Use this tool at your own peril. I have tested numerous times and have had no issues. Hope this makes someone's life easier.
Have a nice day!
Instructions: download and unzip file on desktop (sorry windows only). Open tool folder and click RUN_ME.bat. Its ugly but it works great.
*** Confirmed working on XT1092 and XT1097 unbranded variants for root***
If your boot loader does not unlock do not use this tool.
Note- if you use full restore with these variants it will flash XT1095 firmware.. Do so at your own risk
DOWNLOADS:
V-3
https://www.androidfilehost.com/?fid=95784891001604540
V-4.1
https://www.androidfilehost.com/?fid=95784891001609538

TWRP has been updated to 2.8.1.0. touch issues have been fixed and recovery is fully functional. thanks again Dees_Troy! someone buy those guys at teamwin some beers.
Also buy some beers for graffixnyc and chainfire for all that they do

hi mate,
can I use on my moto X european version ? (XT 1092) I've just unlocked bootloader ...

Does your build match build listed above? If it does maybe. Only tested on xt1095

My Build is KXE21.187-30.3.
What is the difference between this builds?
Mine is Brazilian version XT1097

bhp090808 said:
Does your build match build listed above? If it does maybe. Only tested on xt1095
Click to expand...
Click to collapse
yes. the same build ,KXE21.187-42 - Android 4.4.4 .... XT 1092 (EUROPE)
so I can flash :laugh:
Right ?

If build matches in theory it should work but I can not say for sure. If you wish to try do so at your own risk. I have only tested on XT1095.

mirdones said:
My Build is KXE21.187-30.3.
What is the difference between this builds?
Mine is Brazilian version XT1097
Click to expand...
Click to collapse
The recoveries are made for XT1095 on build KXE21.187-42 don't know if they'll work with yours. As stated above if you wish to try do so at your own risk

tks mate ...
rooted OK !!!
:highfive:

jonata said:
tks mate ...
rooted OK !!!
:highfive:
Click to expand...
Click to collapse
Good to hear

jonata said:
hi mate,
can I use on my moto X european version ? (XT 1092) I've just unlocked bootloader ...
Click to expand...
Click to collapse
Hi which carrior are you on? Does your phone support LTE band 03 and is the motomaker available in your region? Thanks
Sent from my A0001 using XDA Free mobile app
---------- Post added at 11:17 PM ---------- Previous post was at 11:15 PM ----------
bhp090808 said:
I made this for my own personal use , but figured I'd share. I take no credit for the recovery images in this tool. I just put everything together in a simple tool. This is a simple one click recovery flasher and also a means to gain root. The tool will push the SuperSU update zip to your phones internal storage. You can then flash the cwm beta (thanks ShabbyPenquin). After cwm is flashed the tool will then reboot you into recovery so you can flash the SU.zip to gain root. If you choose, you can then flash the stock recovery (Build KXE21.187-42 - Android 4.4.4 thanks to graffixnyc) back onto your phone. Root is not effected by this. I will possibly update when a more stable recovery becomes available. *****"Please be intelligent and only use this if you have a Pure Edition Moto X 2014 (XT1095) and have already unlocked your bootloader. I assume no responsibility if you cant read or follow instructions.***** Use this tool at your own peril. I have tested numerous times and have had no issues. Its also nice to have a way to restore stock recovery to your device. Hope this makes someone's life easier.
Have a nice day!
Instructions: download and unzip file on desktop (sorry windows only). Open tool folder and click bat file. Start with option 1. Its ugly but it works great.
*** Confirmed working on XT1092 ***
DOWNLOAD:
https://mega.co.nz/#!tw8TkSQT!5laPKKBEkDhmuv8LPbHPbjQV4-TmuMIFaa7_LDmOZ8U
Click to expand...
Click to collapse
Thank you so much for the hard work. Quick question though, with root can we unlock the software restrictions and have the XT1095 support the 3 new bands Moto announced it would support with an OTA? They taking forever to release even the date the update would be released on could we get a jump on them and unlock LTE bands that are locked via software restrictions?
Sent from my A0001 using XDA Free mobile app

Slorks said:
Hi which carrior are you on? Does your phone support LTE band 03 and is the motomaker available in your region? Thanks
Sent from my A0001 using XDA Free mobile app
---------- Post added at 11:17 PM ---------- Previous post was at 11:15 PM ----------
Thank you so much for the hard work. Quick question though, with root can we unlock the software restrictions and have the XT1095 support the 3 new bands Moto announced it would support with an OTA? They taking forever to release even the date the update would be released on could we get a jump on them and unlock LTE bands that are locked via software restrictions?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
That's something I haven't even considered. The current bands work fine for my service. I returned to stock recovery and will wait for update. If I have the time I'll look into it though

Slorks said:
Hi which carrior are you on? Does your phone support LTE band 03 and is the motomaker available in your region? Thanks
Sent from my A0001 using XDA Free mobile app
---------- Post added at 11:17 PM ---------- Previous post was at 11:15 PM ----------
Thank you so much for the hard work. Quick question though, with root can we unlock the software restrictions and have the XT1095 support the 3 new bands Moto announced it would support with an OTA? They taking forever to release even the date the update would be released on could we get a jump on them and unlock LTE bands that are locked via software restrictions?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
hi,
my phone is sim free and operator is TIM (italy) in italy no motomaker ...
only germany, france, UK and Netherlands

First off, thanks for the tool. Its awesome to see stuff like this already coming out for the phone.
So, Step 1 worked, Step 2 failed for me. Error "fastboot reason: last time flash failure". To get it back working I ran the third option manually.
- fastboot flash recovery recovery.img
- fastboot reboot
Am I missing something?

fr0st said:
First off, thanks for the tool. Its awesome to see stuff like this already coming out for the phone.
So, Step 1 worked, Step 2 failed for me. Error "fastboot reason: last time flash failure". To get it back working I ran the third option manually.
- fastboot flash recovery recovery.img
- fastboot reboot
Am I missing something?
Click to expand...
Click to collapse
When rebooting into fastboot, give it 30 seconds to a minute to allow fastboot drivers to properly install before hitting enter. I've run approx. 13 devices and have never seen any errors.

Just got my moto x, I havethe same problem as the guy above.

Like I said when phone reboots to boot loader give it time for the fastboot drivers install before hitting enter. Should solve your problems. If it doesn't try deleting and redownloading package.

"Temporary error, restarting" I tried putting my computer on sleep mode, I tried firefox, chrome, and opera. Please help

cornpollen said:
"Temporary error, restarting" I tried putting my computer on sleep mode, I tried firefox, chrome, and opera. Please help
Click to expand...
Click to collapse
me too

Zzoro said:
me too
Click to expand...
Click to collapse
Are you talking about downloading the tool or using the tool?

[Q] Is it possible to roll back to 5.0 from 5.1? XT1096

I'm hating 5.1.. Might be a one off case on my phone but it is simply way too buggy and the battery life is awful compared to what I had going on my rooted 5.0
Like the thread title says, does anyone know if it's doable to get back to 5.0 so I can get back a rooted/stable phone?

Try a cache clearing first, that usually helps with those kind of issues.

bik2101 said:
I'm hating 5.1.. Might be a one off case on my phone but it is simply way too buggy and the battery life is awful compared to what I had going on my rooted 5.0
Like the thread title says, does anyone know if it's doable to get back to 5.0 so I can get back a rooted/stable phone?
Click to expand...
Click to collapse
If your bootloader is unlocked just flash the system.img and boot.img files from 5.0 or 444 through mfastboot. DO NOT FLASH ANYTHING ELSE

chrisrozon said:
Try a cache clearing first, that usually helps with those kind of issues.
Click to expand...
Click to collapse
Yeah.. Unfortunately have done a few of those and factory reset as well.
Sent from my XT1096 using Tapatalk

I am also wondering if it is possible to flash back. Are you saying you have flashed system.img and boot.img and were able to? Wouldnt flashing boot.img give you the old bootloader and possibly brick?

bik2101 said:
I'm hating 5.1.. Might be a one off case on my phone but it is simply way too buggy and the battery life is awful compared to what I had going on my rooted 5.0
Like the thread title says, does anyone know if it's doable to get back to 5.0 so I can get back a rooted/stable phone?
Click to expand...
Click to collapse
Did you take the OTA to get to 5.1?
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
d33dvb said:
I am also wondering if it is possible to flash back. Are you saying you have flashed system.img and boot.img and were able to? Wouldnt flashing boot.img give you the old bootloader and possibly brick?
Click to expand...
Click to collapse
boot.img is not the bootloader. It is the kernel and the ramdisk.
motoboot.img is the bootloader.

JulesJam said:
Did you take the OTA to get to 5.1?
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
boot.img is not the bootloader. It is the kernel and the ramdisk.
motoboot.img is the bootloader.
Click to expand...
Click to collapse
Thank you for the clarification. I took the OTA, like a doof. Do you think its possible to flash back by flashing system and boot for 5.0 with fastboot and the rooted 5.0 with mofo? Will 5.0 boot on the new 5.1 bootloader and partition table?
Woke up this morning to a plugged in phone @92% and scorching hot. Thanks 5.1

d33dvb said:
Thank you for the clarification. I took the OTA, like a doof. Do you think its possible to flash back by flashing system and boot for 5.0 with fastboot and the rooted 5.0 with mofo? Will 5.0 boot on the new 5.1 bootloader and partition table?
Click to expand...
Click to collapse
You definitely cannot flash using mofo if you upgraded your bootloader to 5.1. Your copy of Mofo was specific not only for your device, but for 4.4.4 and 5.0 or 5.0.2 bootloader depending on your device. I put all of that in the noob guide.
d33dvb said:
Woke up this morning to a plugged in phone @92% and scorching hot. Thanks 5.1
Click to expand...
Click to collapse
Back up your data and do a factory reset.
---------- Post added at 06:36 PM ---------- Previous post was at 06:16 PM ----------
d33dvb said:
Will 5.0 boot on the new 5.1 bootloader and partition table?
Click to expand...
Click to collapse
Idk b/c I didn't upgrade my bootloader to 5.1. What version of the 5.1 bootloader are you on, 60.16?

JulesJam said:
Did you take the OTA to get to 5.1?
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
boot.img is not the bootloader. It is the kernel and the ramdisk.
motoboot.img is the bootloader.
Click to expand...
Click to collapse
I was on mofo 5.0.2 (?) then flashed the stock 5.0 then the 5.1 update that's floating around here somewhere. are you saying that it might be possible to get back to mofo 5.0? since i didn't take OTA?! that would be amazing.

bik2101 said:
I was on mofo 5.0.2 (?) then flashed the stock 5.0 then the 5.1 update that's floating around here somewhere. are you saying that it might be possible to get back to mofo 5.0? since i didn't take OTA?! that would be amazing.
Click to expand...
Click to collapse
What verison of the bootloader are you running - 60.11, 60.14 or 60.16?

I am on 60.16, and so bummed. I am guessing it is safe to try with normal fastboot to just try flashing system.img from stock 5.0 worst that could happen is I get a failed message or have to reflash 5.1 stock. I wonder if fastboot will allow me to flash system.img of an older version. I'm willing to take one for the team if someone can confirm the safest route to try, obviously not flashing gpt motoboot or anything else I read.
---------- Post added at 04:30 AM ---------- Previous post was at 04:27 AM ----------
I hate being the idiot example. I knew better than to flash 5.1 ota. I had just gotten zAnti and cSploit working with iptables and arp poisoning too. If anyone is curious, find all the com.zAnti and com.cSploit folders and make them all 777.

JulesJam said:
What verison of the bootloader are you running - 60.11, 60.14 or 60.16?
Click to expand...
Click to collapse
60.16 ..... is that workable? or am I stuck

bik2101 said:
60.16 ..... is that workable? or am I stuck
Click to expand...
Click to collapse
MoFo won't work on the 60.16 or 60.14 bootloaders. With 60.14, which was the 5.1 soak test bootloader, people have reported being able to downgrade back to 60.11 bootloader, but not with the 60.16.
---------- Post added at 01:51 AM ---------- Previous post was at 01:43 AM ----------
d33dvb said:
I am on 60.16, and so bummed. I am guessing it is safe to try with normal fastboot to just try flashing system.img from stock 5.0 worst that could happen is I get a failed message or have to reflash 5.1 stock. I wonder if fastboot will allow me to flash system.img of an older version.
Click to expand...
Click to collapse
IME you can flash stock, signed earlier system.img using mfastboot no problem. But you may need to flash the 5.0 boot.img and radios, too. If you have the system in sparsechunks you can use regular fastboot.
---------- Post added at 01:54 AM ---------- Previous post was at 01:51 AM ----------
d33dvb said:
I hate being the idiot example. I knew better than to flash 5.1 ota. I had just gotten zAnti and cSploit working with iptables and arp poisoning too. If anyone is curious, find all the com.zAnti and com.cSploit folders and make them all 777.
Click to expand...
Click to collapse
I had started a thread about plans for the update back in May to discuss these issues.
http://forum.xda-developers.com/moto-x-2014/general/xt0196-rooted-mofo-plans-5-1-update-t3107088

Is it a safe strategy to root by rolling back everything except the partition table (gpt.bin) and bootloader(motoboot.bin) from a stock 5.0 image via fastboot like normal, and then use kingroot to root 5.0, install sunshine and bob is your uncle? I have been unsuccessful at rooting 5.1 even after trying the UAF vulnerabilities recently. Will 5.0 boot on the 60.16 bootloader?

Deleted

Deleted and left this forum!

Stock Recovery Link Please?

Xpredator 20 said:
Stock Recovery Link Please?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1rEfLdrJbhKaERBMjR3WnRQaVk/view?usp=sharing

Thanks Man.

What's the difference between locked and unlocked bootloader?

You can do more stuff with an unlocked boot loader like rooting your device. Warranty will be void though that's why some prefer to lock it again before they take it to a service center

Thank you for tutorial. I have two questions. If I relock phone, will the warranty be valid? Will I be able to receive OTA updates with relocked bootloader?

Relock failed
message:
Failed (remote:root type is risk)
any idea?

harrymcqueen said:
message:
Failed (remote:root type is risk)
any idea?
Click to expand...
Click to collapse
Follow all steps on first post!

sokkoban said:
Follow all steps on first post!
Click to expand...
Click to collapse
1. If you rooted device- make full unroot! - I unrooted using superuser app "full unroot"
2. If you have TWRP remove it and reverse to original recovery!!! Done
3. Downgrade to C432B052 (Dual SIM / Europe) - Where can i download this old Version?
4. Install last original firmware via OTA update!!! (In my case is C432B170 (Europe)
5. Connect device on PC
Just found C432B052 in your blog - so next try now.

harrymcqueen said:
1. If you rooted device- make full unroot! - I unrooted using superuser app "full unroot"
2. If you have TWRP remove it and reverse to original recovery!!! Done
3. Downgrade to C432B052 (Dual SIM / Europe) - Where can i download this old Version?
4. Install last original firmware via OTA update!!! (In my case is C432B170 (Europe)
5. Connect device on PC
Click to expand...
Click to collapse
ALE-L21C432B052

sokkoban said:
ALE-L21C432B052
Click to expand...
Click to collapse
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
---------- Post added at 11:01 PM ---------- Previous post was at 10:56 PM ----------
harrymcqueen said:
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
Click to expand...
Click to collapse
...found the batch file, will try this!

harrymcqueen said:
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
---------- Post added at 11:01 PM ---------- Previous post was at 10:56 PM ----------
...found the batch file, will try this!
Click to expand...
Click to collapse
Of course you need anrar and connect phone with PC then boot into fastboot and run bat file(FLASH-ALL.bat)
And a little hint. This adb fastboot install will be unbrick your phone. I reed for your problem

sokkoban said:
Of course you need anrar and connect phone with PC then boot into fastboot and run bat file(FLASH-ALL.bat)
Click to expand...
Click to collapse
Thank u for your patience. at least Phone boots again now with your sw installed!!!
So my main problem is solved.
:good:

harrymcqueen said:
Thank u for your patience. at least Phone boots again now with your sw installed!!!
So my main problem is solved.
:good:
Click to expand...
Click to collapse
Use this firmware when you bricked again your phone . This is universal method for unbrick

sokkoban said:
Use this firmware when you bricked again your phone . This is universal method for unbrick
Click to expand...
Click to collapse
I hope not to kill it once more
Have a good night!

will give it a try..

Thanks for the tutorial

Hi
Thaks for the tutorial...
Any idea how to change the Message from "Phone relock" to "Phone Lock" ? same before unlock...

Android Oreo update method

To update to Oreo can i use this method ? https://www.getdroidtips.com/huawei-p10-b360-oreo-firmware-update/
Or is it better to wait for OTA or FF approval ? Thanks

You can use HWOTA for updating. Here's a tutorial for older firmwares, but you can also use the firmware files for Oreo. Download from here.

Jannomag said:
You can use HWOTA for updating. Here's a tutorial for older firmwares, but you can also use the firmware files for Oreo. Download from here.
Click to expand...
Click to collapse
Do i need unlocked bootloader for HWOTA update ?

Well, I tried it on a VTR-L29C432B180 (downloading the 3 files for Oreo, renaming them, using the update.bat with unlocked bootloader and all the steps) and ended up in eRecovery. Then I could restart the phone and it booted up, but it was the same version (B180).
Any ideas?

If you are updating from Oreo beta to Oreo, you can follow the guide that I wrote earlier: https://forum.xda-developers.com/p10/how-to/guide-upgrading-versions-emui-8-p10-to-t3748844

tangoalfa said:
Well, I tried it on a VTR-L29C432B180 (downloading the 3 files for Oreo, renaming them, using the update.bat with unlocked bootloader and all the steps) and ended up in eRecovery. Then I could restart the phone and it booted up, but it was the same version (B180).
Any ideas?
Click to expand...
Click to collapse
Did you let eRecovery do its job? HWOTA pushes the three update files to the phone, installs eRecovery and then provide commands, which tell eRecovery to install these three update files. So, if you did everything right, then eRecovery will install the update, don't cancel it.
If you need further help, contact me via PM.
When we found a solution we'll post it here for the public but for working on a problem it's better to chat directly.
@madoxx77 If your bootloader is locked, HWOTA will ask you to unlock it with the unlock code. Without unlocked bootloader it's not possible.

owichiu said:
If you are updating from Oreo beta to Oreo, you can follow the guide that I wrote earlier: https://forum.xda-developers.com/p10/how-to/guide-upgrading-versions-emui-8-p10-to-t3748844
Click to expand...
Click to collapse
What about if we are coming from Nougat/Emui 5.1?
Any suggestions?
Cheers.
---------- Post added at 07:00 ---------- Previous post was at 06:49 ----------
Jannomag said:
Did you let eRecovery do its job? HWOTA pushes the three update files to the phone, installs eRecovery and then provide commands, which tell eRecovery to install these three update files. So, if you did everything right, then eRecovery will install the update, don't cancel it.
If you need further help, contact me via PM.
When we found a solution we'll post it here for the public but for working on a problem it's better to chat directly.
@madoxx77 If your bootloader is locked, HWOTA will ask you to unlock it with the unlock code. Without unlocked bootloader it's not possible.
Click to expand...
Click to collapse
I don't know why my other reply appeared first to me after the post I'm quoting. Now I see this reply to my first post...
Nevertheless. I did it with the script. When it finished and asked me to hit Enter so the device would reboot, it entered erecovery and only got that screen where it wants to reinstall the original firmware and gives you the option to download it via Wifi. It failed to download it. And then, after a couple of tries, it booted up in Nougat (the same version I was running).
What step do you think went wrong? I used Same Brand Update or whatever it is called.
Cheers.

tangoalfa said:
What about if we are coming from Nougat/Emui 5.1?
Any suggestions?
Cheers.
---------- Post added at 07:00 ---------- Previous post was at 06:49 ----------
I don't know why my other reply appeared first to me after the post I'm quoting. Now I see this reply to my first post...
Nevertheless. I did it with the script. When it finished and asked me to hit Enter so the device would reboot, it entered erecovery and only got that screen where it wants to reinstall the original firmware and gives you the option to download it via Wifi. It failed to download it. And then, after a couple of tries, it booted up in Nougat (the same version I was running).
What step do you think went wrong? I used Same Brand Update or whatever it is called.
Cheers.
Click to expand...
Click to collapse
It seems that the recovery img files you flash with HWOTA are wrong. Please be sure to use these files.
The original recovery has an online check and doesn't allow scripts.

OTA 9.0 Update RET EU

Did someone in the RETEU Channel allready have this ?
I dont see it on lolinet.
Also. Is it possible that i flash a RETUS or DTEU image towards my phone ? Do i still get the RET EU updates or does it not matter?
Kind regards and thanks !

You won't be able to flash the boot.img from RETUS or the international version and you won't get OTA updates if you have an unlocked bootloader.
If it's not in the firmware list yet, the update likely isn't out yet. I'm using a German Moto G6 with the ALI_RETAIL_9.0_PPS29.55-24_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC firmware and it works really well.

@HeavyHDx Idid the same, but my device got the reteu PIE upgrade today.

mcc2005 said:
@HeavyHDx Idid the same, but my device got the reteu PIE upgrade today.
Click to expand...
Click to collapse
I updated with the from stated before. But then when i tried to call i could not hear anyone nor they could hear me... Searched the internet. Tried all solutions... nothing helped...
Rerolled to 8.0 If you got it yesterday i hope i get it soon then.

H377Y said:
I updated with the from stated before. But then when i tried to call i could not hear anyone nor they could hear me... Searched the internet. Tried all solutions... nothing helped...
Rerolled to 8.0 If you got it yesterday i hope i get it soon then.
Click to expand...
Click to collapse
Did you end up getting the update? Sadly the firmware isn't on lolinet yet (the hell kind of name is that anyway?)
https://mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
Downgrading to 8.0 and locking the bootloader won't work since even an unlocked bootloader won't allow you to install older versions. I'm not sure if you can actually get OTA updates with an unlocked bootloader.

Does anyone have the OTA package? It's still nowhere to be found and Motorola support can't provide me with the firmware file unfortunately.

They finally added it:
https://mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
---------- Post added at 01:26 PM ---------- Previous post was at 12:49 PM ----------
Ok so this is disappointing, I'm still getting "(bootloader) Image signed with key bad key" on boot.img even though this is definitely the right version for my phone (XT1925-5 RETEU). Any ideas? I've tried literally every boot.img that's available from that site and none worked. I want to relock my bootloader to give the phone to someone else who needs updates to work.

HeavyHDx said:
They finally added it:
https://mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
---------- Post added at 01:26 PM ---------- Previous post was at 12:49 PM ----------
Ok so this is disappointing, I'm still getting "(bootloader) Image signed with key bad key" on boot.img even though this is definitely the right version for my phone (XT1925-5 RETEU). Any ideas? I've tried literally every boot.img that's available from that site and none worked. I want to relock my bootloader to give the phone to someone else who needs updates to work.
Click to expand...
Click to collapse
You can relock it; it's a little complicated though.

Care to elaborate?

HeavyHDx said:
They finally added it:
https://mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
---------- Post added at 01:26 PM ---------- Previous post was at 12:49 PM ----------
Ok so this is disappointing, I'm still getting "(bootloader) Image signed with key bad key" on boot.img even though this is definitely the right version for my phone (XT1925-5 RETEU). Any ideas? I've tried literally every boot.img that's available from that site and none worked. I want to relock my bootloader to give the phone to someone else who needs updates to work.
Click to expand...
Click to collapse
Bad key is normal. It doesn't mean anything is wrong, it just means your bootloader is unlocked. You can also take OTAs with an unlocked bootloader. The bootloader and gpt.bin refusing to flash is also normal. Bootloader's don't allow downgrades, so it keeps the most recent one. You can skip it if that happens. Just flash everything else in order. You can also downgrade. However, if you flash a firmware that's too old, sometimes the radio or touchscreen won't work. If that happens, just flash a more recent firmware. (Ex. Instead of using the first Oreo firmware, use the latest Oreo release.)

And is relocking the bootloader possible at all?

HeavyHDx said:
And is relocking the bootloader possible at all?
Click to expand...
Click to collapse
It's possible, but I wouldn't recommend doing it. If one thing about the system is off, it'll lock you into read only mode, which will brick the phone. Not even stock firmware can flash in read only. I'm also uncertain of the exact commands to do it. I'd tell you how if I knew. Motorola has their own set of commands they like to use for it.