Related
I bought what i thought were a couple higher quality universal chargers. They charge my razr fast but won't charge my nexus 7 at all. I have one of the chargers pulled apart but before I do any soldering I want to make sure -- if I cross the 2 data points will it work?
Well I couldn't wait 10 minutes so I tried. Answer: no. Wtf?
Can anyone tell me how to hack these chargers to make them work? Is there a resistor I need to remove?
Isn't it more likely to be a software thing?
With my samsung Tab 7.7 i couldn't charge it using my ipad charger until a Dev modded the software on the tablet.
are they 2Amp chargers? most universal chargers are only 1Amp
Well whatever the problem is, I want to charge my tablet in more than one place, I want to charge it faster than the 16 hours generic chargers are taking, and I don't want to pay $30 for OEM chargers.
If your tablet is taking 16 hours to fully charge, return it. I can drain mine after heavy use of the day and its still fully charged in under 6 hours.
Sent from my Nexus 7 using xda app-developers app
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
qoncept said:
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
Click to expand...
Click to collapse
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
reiji said:
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
Click to expand...
Click to collapse
No, my 1A chargers are doing NOTHING at all. I plug it in and the charging icon doesn't come on. Reviews have tested these chargers at about 950ma and as I said, my 500ma Blackberry charger isn't too bad.. It's not lack of power, it's something else.
My guess is it has whatever resistor it needs to make it an "ipad" charger. And the vast majority of 2A chargers will, too.
So.. back to my original question: what do I need to do to make this charger charge my tablet? I KNOW it's possible. I just need to find the guy who can tell me how.
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
I bought the Scosche dual 10 Watt car charger, isn't here yet though. It does say it wont charge the Samsung tablets, maybe due to the proprietary cord because apparently there is a cord that works with them. It's not a specific ipad charger and does say it works with Android devices and tablets.
On a side note, what's the best way to determine what your N7 is actually charging at?
Both of my generic chargers won't work either, a 2.1A generic iPad charger, and a 1A standard USB charger. Considering it WILL charge off a 500ma USB port, it's not a current/amperage issue, it's a software/proprietary hardware issue.
b22ri22an said:
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
Click to expand...
Click to collapse
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
neilrl79 said:
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
Click to expand...
Click to collapse
the cost isn't so much the issue, its the actually working part. do they have one with an angled micro usb so i can mount the tablet in the car properly or preferably a usb adapter one where i can use my own cord
For $30 you could order a handful of different ones on ebay or monoprice and find something that works. But I want a dual charger.
grim82 said:
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
Click to expand...
Click to collapse
does that mean a usb adapter that is certified to work with an ipad will work for my n7
b22ri22an said:
does that mean a usb adapter that is certified to work with an ipad will work for my n7
Click to expand...
Click to collapse
I won't say 100% but I would bet the probability is very high. For the 1A charging they all seemed to play the same game with the voltage on the data lines. Not sure you'll get 2A but you'll at least get 1A.
Edit... maybe not, see this thread:
http://forum.xda-developers.com/showthread.php?t=1781680
I have a philips as351 audio dock that pushes 2A out of the micro-usb charger and the usb port on the back and neither will charge the N7. Bummer because it looks so nice on the dock to
Hello, Long time follower, first time poster.
I cannot post the link, but if you search "Juiced Systems 4.2 AMP" in ebay it's the first item under "Best match" and it's $19.99
Has anyone tried these chargers that claim 2.1A per USB port? Or does anyone know of any similar car chargers that charge 2 devices @ 2.1A?
I just want to buy the best charger that isn't going to blow up my phone, and a dual charger would be excellent if possible.
Thanks in advance.
giz_mang said:
Hello, Long time follower, first time poster.
I cannot post the link, but if you search "Juiced Systems 4.2 AMP" in ebay it's the first item under "Best match" and it's $19.99
Has anyone tried these chargers that claim 2.1A per USB port? Or does anyone know of any similar car chargers that charge 2 devices @ 2.1A?
I just want to buy the best charger that isn't going to blow up my phone, and a dual charger would be excellent if possible.
Thanks in advance.
Click to expand...
Click to collapse
If it's the same one here from amazon http://www.amazon.com/Juiced-System...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 it appears to be apple only.
The one Android customer from that Amazon link said:
I bought this assuming it would charge my Droid DNA at an AC rate. Unfortunately, it charged at a USB rate and could not keep up with usage while driving.
It sounds like with that particular device, in order to get an Android phone to charge at an AC rate is to either modify the charger (through soldering) to short out the data pins or use a USB charge-only cable (DIY modification of an existing cable or purchased one). The Android phone should then see the charger as AC instead of USB for, hopefully, full and faster rate of charge.
I know you are looking for dual port, each with 2.1A - but I wouldn't hold my breath this one will output dual 2.1A without throttling down one of the ports. Its impossible to fit quality circuit in a small cigarette lighter package where due to excess heat the efficiency of your converter will decrease. And even if they manage to produce 4.2A you will either blow your fuse or melt your charger. Just think about it, you won't have any air circulation to even cool it down.
I only trust dual port chargers with 2.1A/1A rating. I reviewed one before - HERE from iSmooth which does work! Also, to my surprise, iSmooth charger was actually made for iPad/iPhone but it WORKS perfectly with Note 2. I can't voucher for other Apple converters, and as a matter of fact I have another one with a separate Apple and Android ports and Note 2 doesn't charge from Apple port. But the one from iSmooth I'm using right now works perfectly for Note 2 and also looks awesome in the car with a blue glow light
TurboPower charger that comes with it is the only thing that will give it a fast charge.
I have no idea how or why Quick Charge tech was left out.
Mine does indeed say "TurboPower Connected" and charges super-fast when I use the USB C Quick Charge 3.0 AUKEY Amp Type-C Dual-Port Wall Charger and the USB C Quick Charge 3.0 AUKEY Car Charger with Dual AiPower Ports. I can't seem to find it now, but I remember reading somewhere that the Moto Z does use QC 3.0, otherwise I wouldn't have bought the above products. NOTE: I am going USB-C to USB-C.
Does not use 3.0.
http://forum.xda-developers.com/z-force/help/moto-z-forces-turbopower-quickcharge-t3429607
In short QC 2.0 and 3.0 don't follow usb c spec according to a top Google engineer. According to Usb c spec the vbus voltage should not exceed 5v. QC tech exceeds this by using 9v and 12v to achieve more power. Motorola built the Moto Z according to spec which allows you to ramp up the current (amps) to achieve more power which is why our stock charger outputs at 5.7amps. You don't need QC to charge fast with Usb c. Usb c with power delivery is actually better . Either way the QC chargers put out 15 watts total. Our turbo charger does 28.5 watts using 5v at 5.7 amps and is actually faster than what's out now. QC chargers use higher voltage to achieve this at 9v 1.7 amps 15 watts, a charger doing 5v 3a does the same 15 watts. So to turbo charge your phone don't use QC chargers unless it also outputs at least 5v at 3a that's the key. Anything less than 3a won't turbo charge. It needs to be a usb C to usb C cable so the charger should have a usb C port not a usb a port like most of you are trying to use. No other charger out now does more than 3amps besides the turbo charger until then use chargers that do 5v 3a. Verizon has a fast charger that supports this and all other fast charging tech.
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-...-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
Will these charge as fast as the stock charger out of the box? And with a USB C cable does it need to support quick charge, or do all USB C cables support quick charge as long as you have it plugged into a USB C quick charge adapter like you linked to?
Nothing charges as fast as the stock charger as far as I know.
I looked around on Amazon to try to find a spare charger with the same speed as the OEM, but there are none as far as I know. QC actually goes against usb-c standard, so whoever has a phone that supports both is technically being shorted on charge speed. I will be waiting for the verified brands (ex. Anker/Aukey) to release a legitimate charger because there have been instances where wall chargers have completely destroyed devices. For the fastest charge, you'll want usb-c cables end to end, but since usb-c is not the standard yet, I would be very careful when buying lesser-known usb-c accessories. Z owners will have to wait for the market to catch up at this point.
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
I bought the Choetech charger from amazon and it works great on my Z Force. no where near the OEM charger but still charges the phone dead to full in a little over an hour and a half. from my limited testing.
fr4nk1yn said:
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
Click to expand...
Click to collapse
Ha! I was thinking the same when I heard about battery fire from the Note 7.
I just bought another oem charger from amazon and called it a day.
squidder said:
I just bought another oem charger from amazon and called it a day.
Click to expand...
Click to collapse
But car charger?
sniperess said:
But car charger?
Click to expand...
Click to collapse
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
tgambitg said:
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
Click to expand...
Click to collapse
I can confirm this. I just got this phone on an upgrade after insisting to the Verizon sales representative that I did NOT want a Galaxy S8, that I was absolutely sure I didn't want the S8, and that I think the Z Force is a much better device than the S8. After seeing the genuine shock on his face that I slighted his phone, I bought the OtterBox case and the Verizon branded USB-C car charger with it.
The car charger definitely charges faster than my non quick charge USB-C cable, but not as fast as the stock charger. The stock charger will take me from ~5% to full in an hour. The Verizon car charger takes about an hour and twenty minutes to go from ~5% to full.
All in all, it was worth the money spent on the charger. It is definitely better than the 8 hour charge my standard USB-C usually takes.
This is something i haven't seen mentioned or confirmed in all the reviews i have read. I have read reviews of other xiaomi devices that said it was qc 3.0 enabled, but the charger that ships with the phone is not a quick charger and the user would have to buy their own to take advantage of this feature.
so does anyone know if the charger we receive with the mix is in fact a quick charger as the mi mix is on the devices that is qualcomm quick charge 3.0 enabled.
knives of ice said:
This is something i haven't seen mentioned or confirmed in all the reviews i have read. I have read reviews of other xiaomi devices that said it was qc 3.0 enabled, but the charger that ships with the phone is not a quick charger and the user would have to buy their own to take advantage of this feature.
so does anyone know if the charger we receive with the mix is in fact a quick charger as the mi mix is on the devices that is qualcomm quick charge 3.0 enabled.
Click to expand...
Click to collapse
Check features: http://www.gsmarena.com/xiaomi_mi_mix-8400.php
That site quoted 83% in 30mins, I am not getting that, not even close. I bought the anker USB C quick charge charger which suppose to be quick. I don't feel quick at all...
Anyone also bought charger that can comment on this?
audscott said:
Check features: http://www.gsmarena.com/xiaomi_mi_mix-8400.php
Click to expand...
Click to collapse
yes, as i posted i am well aware the phone is quick charge 3.0 capable. my question though is the charger that ships with the phone a quick charge charger. there are other xiaomi phones that are also quick charge but the user has to provide their own quick charger.
if i were to guess i do not think this charger is a quick charger based on my results compared to my nexus 6.
wu5262 said:
That site quoted 83% in 30mins, I am not getting that, not even close. I bought the anker USB C quick charge charger which suppose to be quick. I don't feel quick at all...
Anyone also bought charger that can comment on this?
Click to expand...
Click to collapse
I got an Aukey QC3 5-Port Charger.
I'm trying to get my device empty right now (tough though as it lasts pretty long) and will test it afterwards.
Gesendet von meinem MIX mit Tapatalk
I compared the included charger with my Anker quick charge 3 charger using the Ampere app.
The given stats were marginally better with the included charger.
I'm not really sure what all the figures mean but they were there or there abouts the same, the Anker charger is Qualcom QC3 certified.
Not nearly getting the quoted charge times though with either charger.
At 53% it claimed 44 mins to 100%
Yes, it ships with a fast charger. It delivers:
5V - 2.5A (12,5W)
9V - 2A (18W)
12V - 1.5A (18W)
So yes, it's a QC2.0 fast charger.
I'm currently at 69% and on the normal charger it's 3 hours+, on the QC2.0 charger I have, it's 1.5 hours and it gave me the same for the included charger. Kind of disappointed that it's only 2.0.
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
knives of ice said:
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
Click to expand...
Click to collapse
Which one? Link?
Thugsin313 said:
Which one? Link?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B01M11UT3V/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1
with a case you don't even know it is there.
Thx for the Link:good:
Yes BUT!!!... lol
knives of ice said:
after seeing how insane the battery life is on this phone i just went with the qi wireless charging usb C adapter and I have no plans on going back, works awesome.
Click to expand...
Click to collapse
What I dislike, and you can't use is the Wireless Charging with your phone and case, and a metal plate stuck to the back of the phone. You see, I really like the various magnetic holders in the car (I have one that works with the CD Slot of the vehicle to mount the holder, another that is a little ball mount that sticks to any flat service). They use a thin metal plate to mount to the back of the phone case, and the magnetic is part of the phone mount that is in the vehicle. If you place the phone with the holder and the metal plate on the wireless charger base, it will overheat both the charging base and the phone.
I REALLY like the magnetic phone mount, and do like wireless charging but it a moot point if you have a mounting plate on the back of your phone or case.
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
LormaD said:
What I dislike, and you can't use is the Wireless Charging with your phone and case, and a metal plate stuck to the back of the phone. You see, I really like the various magnetic holders in the car (I have one that works with the CD Slot of the vehicle to mount the holder, another that is a little ball mount that sticks to any flat service). They use a thin metal plate to mount to the back of the phone case, and the magnetic is part of the phone mount that is in the vehicle. If you place the phone with the holder and the metal plate on the wireless charger base, it will overheat both the charging base and the phone.
I REALLY like the magnetic phone mount, and do like wireless charging but it a moot point if you have a mounting plate on the back of your phone or case.
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
Click to expand...
Click to collapse
get a Pioneer Appradio that mirrors your phones screen and problem solved. now that i'm so used to it i can't imagine my phone's screen not being the screen of the head unit in my car everything is right there makes it so much easier
LormaD said:
I am using amperage and I own two qualcom version 2.0 chargers one from my Nexus 6, and one I bought on amazon. The OEM Nexus 6 draws about 1.6amps on charge, and the Anker 2.0 draws under 300 mAH. The computer 3.0 USB port from a desktop draws 370mAH to charge the phone.
I will probably invest in a true oem qualcom 3.0 charger.
Pretty cheap of Shomi to not include a 3.0 charger
Click to expand...
Click to collapse
I'm revising my previous post, it seems that the provided charger may indeed be a QC 3.0.
I've been reading that if you use USB-c to USB-c cable instead of the provided USB-a to USB-c cable, you actually get charge rate.
I've also been reading up on the QC 3.0 vs 2.0. Both will max out at 18watts. But 3.0 has a variable voltage whereas 2.0 is fixed at 5V, 9V and 12V. You can see that in the below link, there's a nice table of Watts for each QC.
http://www.androidauthority.com/quick-charge-3-0-explained-643053/
However with USB-C to USB-C, it can charge at full 29Watts. That's a huge difference.
you can see that in the description provided by Anker here
https://www.amazon.com/Anker-Type-C-Delivery-Charger-PowerPort/dp/B01D8C6ULO
You can also see here in this device
https://www.amazon.com/Lumsing-Charge-Charger-Foldable-Macbook/dp/B01I1OIO4A
it says 48W of power, and allocates 19W for QC 3.0 which means the other Type-C port is allocated for 29Watts.
So I think I'm going to be looking for something with a direct USB-C port as a charger.
Certainly, this may be all for not if the Xiaomi Mi Mix is limited to 18W of input anyways.
I have the Anker USB-C to USB-C charger, my initial testing indicate that the original charger (China Plug) and my Samsung Galaxy S6 Edge charger (UK Plug) are capable of doing 23.8 Watts max, i tried to monitor the difference and what I noticed is the Mi Mix original charger seems to be adjusting the charging power more often (not really sure why and whether it's good). My Anker USB-C to USB-C went up to 28.9 Watts Max. All chargers seems to scale down their charging rate after battery reach 80%+ so I think the best way to test is to empty the better and start from 0%. I doubt I will be doing that test though as it's quite hard to empty battery on Mix and I am pretty happy with my Anker charger so don't think I will be using Stock one or my Samsung one.
Unless I go on holiday with multiple devices that still use old USB port, Anker USB-C to USB-C is my go to charger.
So I think what you confirmed was that the mix can take power at 29 watts.
That's good to know.
Just received this wireless charging receiver today that claims to do fast charge
https://www.amazon.com/gp/product/B01LX0Y5CS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
it does charge much faster, almost double of the one i posted originally in this thread. i'm getting a charge on it around 950ma which isn't too bad for wireless i don't think.
Is there an app I can use to see if this phone is quick charging ? I have a Google pixel charger USB c to USB c. Trying that out now .I can't really judge because this phone is at least 1000 mAh bigger than what I'm used to lol.
LaNsLyDe said:
Is there an app I can use to see if this phone is quick charging ? I have a Google pixel charger USB c to USB c. Trying that out now .I can't really judge because this phone is at least 1000 mAh bigger than what I'm used to lol.
Click to expand...
Click to collapse
That's what I'm using too! I was at 24% battery, went to sleep for 4 hours with it charging, and I'm only at 74%. There has to be a way to know when we quick charge lol
I've bought a cheap cable for my Huawei P10 (also type C) but it doesn't work on my new OP 5T.
Is this common or rare. If i need an other cable should it be an OP cable then?
Question first: which Charger do you use?
Dash Charger only works with Dash Cable.
Other Cables do fine with normal Chargers like Choetech Anker or Aukey
the sooner one plus just adopt the generic USB_PD or even Qualcomm 4+ the better. DASH is too niche. My QC 4+ Razer Phone charges as quickly as the OP Dash
MazeHei said:
Question first: which Charger do you use?
Dash Charger only works with Dash Cable.
Other Cables do fine with normal Chargers like Choetech Anker or Aukey
Click to expand...
Click to collapse
I think it was a Apple plug with usb port ... i was at my work so i have improvise
Dont want to dash charge, only normal charge but that won't work