Hello!
I have flashed magisk 15.3 on my Amazon Tate through TWRP, and although everything seemed to be going okay to begin with, after I rebooted however, i am stuck in a bootloop.
My device is the Amazon Tate.
My exact issue is that I cannot enter recovery, I cannot seem to enter fastboot and on my screen is the white and orange "Kindle Fire" logo. My rom before this happened was CM13, so its not actually booting into the rom... It's not even booting into the white and blue screen.
Unfortunately when I plug in the tablet now I get the battery charging screen. This is probably a good response as it shows that I still have that partition.
However I still cannot boot into recovery. Could this be because on the Amazon Fire Tate you need to have two bootloaders to open the recovery? One might have become damaged when installing magisk? I'm truly stuck
It's not detected by my laptop in any way.
Oc33lot said:
Hello!
I have flashed magisk 15.3 on my Amazon Tate through TWRP, and although everything seemed to be going okay to begin with, after I rebooted however, i am stuck in a bootloop.
My device is the Amazon Tate.
My exact issue is that I cannot enter recovery, I cannot seem to enter fastboot and on my screen is the white and orange "Kindle Fire" logo. My rom before this happened was CM13, so its not actually booting into the rom... It's not even booting into the white and blue screen.
Unfortunately when I plug in the tablet now I get the battery charging screen. This is probably a good response as it shows that I still have that partition.
However I still cannot boot into recovery. Could this be because on the Amazon Fire Tate you need to have two bootloaders to open the recovery? One might have become damaged when installing magisk? I'm truly stuck
It's not detected by my laptop in any way.
Click to expand...
Click to collapse
I had your exact problem and solved it yesterday. The first thing you need to do is buy a fastboot cable (I bought this one: https://www.amazon.com/gp/product/B00KYVEM1I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) to get into fastboot mode, then follow my other post here: https://forum.xda-developers.com/kindle-fire-hd/7-development/rom-marshmallow-t3315075/post75553313
Lesson Learned: DO NOT FLASH MAGISK ON THIS TABLET EVER!
Related
So, I'm running software 6.3.1(stock), and I wanted to root. So, i followed a tutorial that said I should install TWRP recovery after I root. But, dummy me, tried to install TWRP recovery on a stock kindle fire. After a couple of minutes of installing, a console message appeared that said that the program told the kindle to boot in fastboot mode. Well, after 10 minutes, the Kindle was still not booted, so I disconnected it from my PC. And now, when I try to turn the Kindle back on, it just stops at the splash screen. I'm thinking that it's bricked, so can anyone help me get this fixed?
ok so I am extremely new to this, I rooted my kindle and that worked fine. I then used fire flash to get twrp in is and it booted into the TWRP recovery mode with no problem. I didnt have any ROMS on it yet just wanted to make sure it would boot into TWRP. So I tried to reboot the kindle and it was stuck in bootloop. I plugged in my factory fastboot cable and put it in fast beet. It is detected in my device manager as an adb device. I used KF first aid to try to restore it and now I am getting a red triangle saying kindle fire system restore. neither of the 2 options work though. When it boots it is the normal kindle orange and then goes to the blue logo then it gives me the triangle. Is there anything I can do to fix it.
Um I would put it in fast boot and restore the system image, I haven't used kffirstaide before, but if that's the screen im thinking of its asking you to either do a reset or boot normally, and neither are working so something it probably wrong with the system partition. So look try look for something about doing a system image restore if u can in kffirstaid. That's best I can guess at for now.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Have a read through this post it's very informative and willmost likely help :good:
http://forum.xda-developers.com/showthread.php?t=1552547
Hello everyone,
I own a Kindle Fire HD 7" (X43Z60) the one WITH camera in front.
Bought it from a online auction site used, it was on bootloop (reason i got it cheap)
Since i know electronics i was able to make my own Factory Cable using some useful guides on this forum, managed to get the KFHD7 on fastboot without issues.
Then I restored it to STOCK amazon os 7.2.3 using this guide http://forum.xda-developers.com/showthread.php?t=1951254 it there was no problem, the OS loaded, there was SuperUser and it was rooted.
Then I went to the Kindle Fire 2nd-bootloader + TWRP 2.7.0.0 for the Kindle Fire HD 7 http://forum.xda-developers.com/showthread.php?t=2128848 and followed all the steps.
downloaded files
checked md5 hash for all files
checked ADB working
checked fastboot working
flashed everything
I followed every single step and after finishing to flash all the files using fastboot, yet the KFHD7 does not get into TWRP, in the last step i reboot the device using: fastboot -i 0x1949 reboot
It shows the KindleFire logo in yellow, and then blue as the OP of the guide states, but even while holding down Vol Up (far left button) from the yellow to blue logo, it wont load TWRP, in fact, it just stays on the blue KindleFire logo, i have left it for more than 30 mins yet it doesnt load up.
Using: fastboot -i 0x1949 oem recovery
Doesnt work either, it wont load up TWRP it will stay on the blue kindlefire logo.
Im still able to get into fastboot using the factory cable once again.
Redid all the steps once again from KFHD_SRT to 2nd Bootloader +TWRP, and still stuck in the blue KindleFire logo.
Any clues?
UPDATE:
Tried several versions of Hashcode's TWRP modified version goo(dot)im/devs/Hashcode/tate/
From TWRP 2.7.0.0 downwards until i reached 2.4.4.0 this one for my surprise, actually booted up after holding the VOL UP button for 1 MINUTE.
Then tried Hashcode ZIP updates to get TWRP to 2.7.0.0 and i face the same original problem, the Kindle is just stuck in the white/blue KindleFire logo for more than 10 minutes without reaction.
Using the ZIP updates for TWRP 2.5.0.0 and 2.6.3.0 boot the WTRP logo after a very long time, like 3+ Minutes but it just freeze on the TWRP logo, does nothing even after leaving it load for more than 15 minutes.
Any clues?
Hey guys!
So I have ran into an issue, I just got a brand new Amazon Kindle Fire HD 7", it has the 1.5 GHZ processor.. ect. Anyways, so I wanted to install some system updates and I didn't want to allow it to do that because I was afraid I would loose my ability to root, so I shutoff the device. Well like an idiot, it booted back up and displayed the message again, saying it was updating, I did it a second time, powered the device down, and now I am stuck after the Amazon boot logo, basically I just get a lit black screen. However I can access the adb interface, only issue is that the device is unauthorized.. (Something else I didn't think of). I tried to enter fastboot but it just says waiting for device.
So is my only option left is to get a Fastboot cable? What mode is the device stuck in? It's not bricked right since there wasn't any custom anything installed, just an interrupted system update. Should I attempt to get a replacement from Amazon?
Thanks a ton,
Matt
If you get a fastboot cable, you can forcefully restore the O.S....but you're covered under warranty so you can return it
Hello and good morning.
I am writing here, because I have a big problem. My Kindle Fire HD (first Generation) does not start any more. After an update (Cyanogenmod tate) I only get the yellow Kindle fire logo. And after few seconds the Kindle starts again. Then - after about five minutes - everything is dead. But if I do a reset I get the same situation. Unfortunately I get no connection to my device via the computer (tried Windows 7 64 bit and Ubuntu). With adb devices I cannot detect my Kindle. Is there a possibility to get into fastboot to install CWR etc.?
Help me, please
Herbert
So to clarify, the first time the logo comes up it freezes and then resets itself, followed after about 5 minutes the kindle just shuts itself off?? Also, you ask about getting into fastboot to install CWM. Do you not have a recovery installed? Such as CWM or TWRP?
I installed TWRP version 2.6
But I also cannot boot into the recovery (Power on & Vol +). Then nothing happens. I actually have ordered a fastboot-cable. Maybe I have success with this cable. Otherwise it is finished for me.
Yea try booting into recovery and flashing the system images to get back to stock. That's all i can think of since i'm not entirely sure what happened, either you got a bad download or your kindle just flipped out and essentially bricked itself.