Root Huawei Mate 10 Pro with MAGISK (TWRP needed) - Huawei Mate 10 Guides, News, & Discussion

Hello guys,
today i rooted my Huawei Mate 10 pro and tought i could write a Guide because no one else did atleast i didnt find a usefull Guide
So first of all
it always can happen that your Phone bricks in that case its your own fault.
I take no responsibility for any Damage on your Phone.
At the first Step you have to Download all the things you need (DL Links are on the Bottom of the posts )
So here is what you need: TWRP for the Huawei Mate 10 pro, and the Magisk files (ZIP & APK) and ADB minimal + Windows 10 FIX
Your Bootloader must be unlocked (Very simple just google it)
Your Phone should have at leaste 80% Power
So now that we have Downloaded everything and unlocked the Bootloader we can Finally start.
Hard part ... installing TWRP
At First you have to flash the Recovery for this you have to connect your Phone to the PC and allow the USB Debugging
The you start the ADB Minimal Tool and typ the following command:
ADB reboot Bootloader
after the Phone changed sucessfully into the Botloader you type the next Command
fastboot flash recovery_ramdisk [ Filepath\TWRP.img ]
without the Brackets
after the Files are Transfered you have TWRP already installed
Now to the easyer part ... installing MAGISK and MAGSIK Manager
At first you have to boot into recovery with the following command:
adb reboot recovery
After you ran the command you Phone will be in the TWRP recovery
The next Step is to navigate to the Advanced settings in TWRP and click ADB Sideload
and Swipe right without ticking any Checkbox there.
Now you have to run the next Command
adb sideload [ Filepath\Magisk.zip ]
After the Files are Transfered you just have to restart the phone and get the MAGISK Manager on your
Phone. Don't Download MAGISK from the PlayStore look for it here on XDA.
When you made no Mistakes and I made no mistakes in my Guide your Phone should be rooted if you see
any mistakes i made please tell me so i can correct them
Edit:
Thanks to ante0 for providing the links
Thats all you need.
Minimal ADB & Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
TWRP: https://forum.xda-developers.com/mate-10/development/recovery-twrp-3-2-1-0-touch-recovery-t3752399
MAGSIK: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Good Luck Guys

Nice and bad job. Nice for tutorial. Bad for not providing any links to the files that you used.

badmania98 said:
Nice and bad job. Nice for tutorial. Bad for not providing any links to the files that you used.
Click to expand...
Click to collapse
Totally agreed
Sent from my Nexus 6 using Tapatalk

badmania98 said:
Nice and bad job. Nice for tutorial. Bad for not providing any links to the files that you used.
Click to expand...
Click to collapse
@OP, please add links:
Minimal adb & fastboot https://forum.xda-developers.com/showthread.php?t=2317790
TWRP: https://forum.xda-developers.com/mate-10/development/recovery-twrp-3-2-1-0-touch-recovery-t3752399
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Hi, i success flash twrp and root with magisk my m 10 pro but have one question - can i easy install ota update? Do i lost root or brick my phone?

Good morning, companhiero, my mate 10 pro when I put in ADB sideload gets start and error, can I install manually? Why install TWRP?
---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------
The mate 10 pro found rooted with SU, is there a problem?

andre_ferreira said:
Good morning, companhiero, my mate 10 pro when I put in ADB sideload gets start and error, can I install manually? Why install TWRP?
---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------
The mate 10 pro found rooted with SU, is there a problem?
Click to expand...
Click to collapse
Same problem I guess: rooted with SU, and now I can't root with Magisk:
"Updater process ended with ERROR : 1" and "Boot image patched by other programs" + "Please restore stock boot image"
So I need to restore stock before rooting with Magisk...

andre_ferreira said:
Good morning, companhiero, my mate 10 pro when I put in ADB sideload gets start and error, can I install manually? Why install TWRP?
---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------
The mate 10 pro found rooted with SU, is there a problem?
Click to expand...
Click to collapse
What's your full firmware?
grove said:
Same problem I guess: rooted with SU, and now I can't root with Magisk:
"Updater process ended with ERROR : 1" and "Boot image patched by other programs" + "Please restore stock boot image"
So I need to restore stock before rooting with Magisk...
Click to expand...
Click to collapse
What's your full firmware?

grove said:
Same problem I guess: rooted with SU, and now I can't root with Magisk:
"Updater process ended with ERROR : 1" and "Boot image patched by other programs" + "Please restore stock boot image"
So I need to restore stock before rooting with Magisk...
Click to expand...
Click to collapse
I'm having the same problem on C636 and racking my brains out trying to figure out a way to get rid of SuperSU and install Magisk without losing all my stuff. Does anyone know of a way?

Any one knows if this method will turn your camera to crap and remove the drm keys? Some people have reported this as an issue.

Rippersportal said:
Any one knows if this method will turn your camera to crap and remove the drm keys? Some people have reported this as an issue.
Click to expand...
Click to collapse
Can't say about the DRM keys but the Camera looks good. Only thing is that Snapchat has this oil painting looking vibe going on. I can't remember if it was like that before hand

I had rooted my Mate 10 Pro (C432) with SuperSu. Afterwards i tried to switch to magisk but had problems. Installed stock firmware and rooted with magisk. I decided to use magisk because of many problems with SuperSu.

You wrote:
flash recovery_ramsik
instead of:
flash recovery_ramdisk
Pls fix in your guide!

not working
reV17 said:
Can't say about the DRM keys but the Camera looks good. Only thing is that Snapchat has this oil painting looking vibe going on. I can't remember if it was like that before hand
Click to expand...
Click to collapse
i have bl unlocked and rooted with supersu and unrooted and uninstalled supersu and tried this guide but i get same error boot image patched by another program, flash boot image, mine bla a09 8.0.0.104(c567). i down loaded the firmware and extracted update.app and extracted its contents and have no clue which is the boot image and dont know how to flash it, any help please?

llvllaster said:
I had rooted my Mate 10 Pro (C432) with SuperSu. Afterwards i tried to switch to magisk but had problems. Installed stock firmware and rooted with magisk. I decided to use magisk because of many problems with SuperSu.
Click to expand...
Click to collapse
i have the same issue and trying to flash to stock but i am unable to, i have the bla a09 US version, i have downloaded the recent update.app and extracted its contents and dont know which one to use, can you direct me, thank you.

Only a question: can I use xposed with this version of magisk?
If Yes, which version?
Inviato dal mio BLA-L09 utilizzando Tapatalk

lingarajug said:
i have the same issue and trying to flash to stock but i am unable to, i have the bla a09 US version, i have downloaded the recent update.app and extracted its contents and dont know which one to use, can you direct me, thank you.
Click to expand...
Click to collapse
İ didn't used any software like update.app etc. İ used the app firmware finder (can be found in playstore) in order to download and install the stock rom.
Btw, sorry for my late response.

Please give me the link for windows 10 fix

Hi, I have successfully magisk root... only one question from me.
Can I turn off the OEM unlock in developer mode?

ceres said:
Only a question: can I use xposed with this version of magisk?
If Yes, which version?
Inviato dal mio BLA-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried Installing it and it caused a bootloop.

Related

[Q] Htc One Root help!

Just tried rooting the phone for the first time. Not too familiar with rooting. Only done a few phones before.
Unlocked boot loader on dev site. Installed TWRP just fine. Installing root package went fine, but I was unable to install busybox. It would either fail to install, or crash the phone and reboot. I found a root + busybox zip, flashed that, and then SuperSU said I wasn't rooted at all! Tried flashing the old SuperSU root package again, but I'm still not rooted anymore. Can someone give me a quick fix for this please?
Thanks.
Is there anyone that can give me some advice? It would be MUCH appreciated!
hi friend ..
i'm also new about rooting hTC (1st time).i'd like to help, but not good enough on explanation ..i root my hTC One on day 2nd bought it.Might some help from youtube and xda topics about unlock bootloader, s-off & rooting.
after u done unlock bootloader, just download twrp zip or cwm zip..extract it copy twrp file (img) on fastboot folder (on pc drive with fastboot files for unlock bootloader process).
right click img file to open as cmd.Then type "fastboot flash recovery recovery.img" then press enter..if u see word just like okay u can go back to bootloader mode, select recovery if u see word on top of screen while htc booting mode that's mean u already done flashing recovery.wait just 2 second, twrp should appear..u should download superSU or super user early put on ur sd then u flash it use twrp..check ur root status use root checker or titanium backup.lastly u tap on superSU or super user icon to update binary (for this method i'm not sure u need to update or not) might somebody got any best answer..
sorry for bad english & too simple methods.
Sent from my HTC One using xda app-developers app
Panduhz said:
Is there anyone that can give me some advice? It would be MUCH appreciated!
Click to expand...
Click to collapse
do you have the superuser app installed?
zaphodbeeb said:
do you have the superuser app installed?
Click to expand...
Click to collapse
I did, but when I opened it, it says I wasn't rooted as if I just installed it from the play store without a root.
Panduhz said:
Just tried rooting the phone for the first time. Not too familiar with rooting. Only done a few phones before.
Unlocked boot loader on dev site. Installed TWRP just fine. Installing root package went fine, but I was unable to install busybox. It would either fail to install, or crash the phone and reboot. I found a root + busybox zip, flashed that, and then SuperSU said I wasn't rooted at all! Tried flashing the old SuperSU root package again, but I'm still not rooted anymore. Can someone give me a quick fix for this please?
Thanks.
Click to expand...
Click to collapse
for complete guide :
http://forum.xda-developers.com/showthread.php?t=2265618
---------- Post added at 07:11 AM ---------- Previous post was at 07:11 AM ----------
Panduhz said:
Just tried rooting the phone for the first time. Not too familiar with rooting. Only done a few phones before.
Unlocked boot loader on dev site. Installed TWRP just fine. Installing root package went fine, but I was unable to install busybox. It would either fail to install, or crash the phone and reboot. I found a root + busybox zip, flashed that, and then SuperSU said I wasn't rooted at all! Tried flashing the old SuperSU root package again, but I'm still not rooted anymore. Can someone give me a quick fix for this please?
Thanks.
Click to expand...
Click to collapse
for complete guide :
http://forum.xda-developers.com/showthread.php?t=2265618

TWPR 3.1.0 and EMUI 5

Hi,
anyone tried to flash TWRP 3.1.0? https://dl.twrp.me/vienna/
Maybe succesfully rooted the P9+ with it?
Regards
Flashed on B360 but still unable to enter TWRP Recovery, just stuck on bootscreen "Your device has been unlocked..."
//Niklas
Any update for successful root ?????
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
nikjensie said:
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
Click to expand...
Click to collapse
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Grlschia said:
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Click to expand...
Click to collapse
Did you try to root using phh SuperSu?
cmexec said:
Did you try to root using phh SuperSu?
Click to expand...
Click to collapse
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Grlschia said:
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Click to expand...
Click to collapse
Wich TWRP did you used? im stuck in "your device is booting"
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
That downloaded from this link:
This https://dl.twrp.me/vienna/twrp-3.1.0-0-vienna.img.html of this link has blocked me too the phone. I reverted to another version that I downloaded through a link I always found on this forum, that I can not remember.
P.S.: Sorry if you copied it is not, just I find the load. Thank you
L29C636B362 wont boot to TWRP recovery...
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
cmexec said:
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
Click to expand...
Click to collapse
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Grlschia said:
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Click to expand...
Click to collapse
im unable to open that mega folder can you re-share it ?
Try it: pan.baidu.com/s/1nvqbYNR
All credits to [email protected]
matagatoz said:
im unable to open that mega folder can you re-share it ?
Click to expand...
Click to collapse
Excuse me, I have some problem for sharing, I fix just put the link to download.
jvelasco said:
Try it: pan.baidu.com/s/1nvqbYNR
Click to expand...
Click to collapse
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Hello, I too with the new TWRP I managed to back up and restore her, but miss the fact that we can have the rott. I tried to install the various 'SuperSu', 'phh superuser' and not least 'Magisk', not get anything good. Now I left clean, no bootloader unlocked and no TWRP. but its original recovery, waiting for some of the many programmers and modders are able to find a winning combination in order to have the root on our phone. One reason for the only backup I am using the app 'Backup Huawei' already installed it does its job very well, in qunto also saves the settings that we do. See you soon and good navigation and use with this amazing phone.
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
You need to use the phh version r275...
//Nik
jvelasco said:
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
Click to expand...
Click to collapse
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
cmexec said:
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
Click to expand...
Click to collapse
root can be achieved with systemless root. i think the version is 2.79 found in the p9 forums. i rooted my p9+ with the latest nougat earlier today. twrp is now 3.1.0.

[Guide] Mate 10 Magisk Root

Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Important! Remove Huawei "HiSuite" application if it's already installed. It may interfere script running.
C. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
D. Backup data, it might be restore factory default setting especially using downgrade ROM version.
E. Update package will be put in the internal /data partition.
F. Unlock bootloader before flash steps, use unlock.bat in "HWOTA8_Mate10" lock directory.
G. After update successfully, device might be locked again.
H. Get HWOTA8_Mate10 Package (HWOTA8_Mate10_2018052301_Remove_ota_rebrand.zip)
I. Windows10 can't recognize mate 10 fastboot device, see dc-unlocker free registry patch to fix it. (Link)
J. Mate 10 has imei in oeminfo, which is used for unlock bootloder not for system. Run lock/info.bat to see oeminfo IMEI.
Magisk (Thanks to @topjohnwu)
A. Install Magisk by running magisk/magisk.bat and follow instructions.
B. Install Huawei Wifi Fix module (Huawei-Wifi-Fix_v1.0_1500_2018041201.zip), if wifi is not working. [Not Must]
C. Join or dig more information from Magisk forum.
Change Log:
2018052301: Remove ota function, it bricks phone with recent new ROMs.
2018051001: Remove rebrand function, it bricks phone with recent new ROMs.
2018042501: Add BLA-AL00C786 porsche/cn (Not tested).
2018042401: Repack use full compress if update zip failure. Support ALP-L29C636B134 and BLA-L29C636B137 repack.
2018041201: New Magisk v16.3 and WiFi Fix module use 1500 template.
2018031301: Add new brand (no test), ALP: C69, BLA: C55 C109 C771 C782
2018021601: Replace with new Magisk 15.4, add huawei wifi fix module.
2018020601: Support BLA-L29C432B130-log repack.
2018012201: Port Magisk to Mate 10, only test ALP-L29C636B129 pass safetynet.
2018011401: Add new brand (no test), ALP: C02 C40 C109 C212 C346 C432 C605, BLA: C25 C33 C34 C45 C316 C521
2018011301: Support new update-binary
2018010501: Repack add lock bootloader selection, rebrand use huawei function which is more safe.
Nice, glad to see its very similar to the p10/mate 9.
Can this work on mate 10 Pro?
mankindtw said:
Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
C. Backup data, it might be restore factory default setting especially using downgrade ROM version.
D. Update package will be put in SD card.
E. Unlock bootloader before flash steps.
F. After update successfully, device might be locked again.
G. HWOTA8_Mate10 Package (HWOTA8_Mate10_2017120901.zip)
Flash Update
A. Put three huawei update files (update.zip, update_data_public.zip, and update_all_hw.zip) into "HWOTA8_Mate10" repack directory.
B. Run repack.bat to patch three zip files.
C. Use Vol-Dn + USB cable to boot into fastboot mode.
D. Run Replace_Recovery.bat in HWOTA8_Mate10 and follow message instructions.
E. It will reboot and install update automatically.
Click to expand...
Click to collapse
Wow, will give it a try
---------- Post added at 05:29 AM ---------- Previous post was at 04:45 AM ----------
Hope there might be some one who will elaborate Rebranding of Mate 10
k4fari said:
Hope there might be some one who will elaborate Rebranding of Mate 10
Click to expand...
Click to collapse
I'm going to try rebrand.
Its for the first time ever i am unable to unlock the boot loader, i obtained the boot loader unlock code by the following method for my mate 10. Don't know whats went wrong , when i try to unlock the boot loader in fastboot its giving an error. anyone can guide me on this?
Edit: I logout the Huawei Id and also set the usb debugging to Manufacture Mode by using *#*#2846579#*#* and then tried to unlock the boot loader and it worked as a charm.
mankindtw said:
I'm going to try rebrand.
Click to expand...
Click to collapse
Best of luck then.
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
k4fari said:
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
Click to expand...
Click to collapse
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Mm You can not even work on the mate 10 pro?
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Ok got it, now it started to update to 8.0.0.126(c185) the latest one available on ff, i'll post the results after a while.
Regards
it started and the update failed on the phone at 54% whats wrong with me
k4fari said:
it started and the update failed on the phone at 54% whats wrong with me
Click to expand...
Click to collapse
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
mankindtw said:
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
Click to expand...
Click to collapse
Yes i have downloaded the full ota 8.0.0.126 of 2.68 gb of c185 , currently i am on 8.0.0.119(c185)
This one is have downloaded , is it because i skipped 8.0.0.125(c185) ?
k4fari said:
Yes i have downloaded the full ota 8.0.0.126 of 2.57gb of c185 , currently i am on 8.0.0.119(c185)
Click to expand...
Click to collapse
Try other version of c185 ROM to see if it makes any difference.
mankindtw said:
Try other version of c185 ROM to see if it makes any difference.
Click to expand...
Click to collapse
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
k4fari said:
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
Click to expand...
Click to collapse
Don't try, I'll give you another "update_binary" to patch zips.
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
Now update stops at 6% in the phone and shows software insatll fails , i have tried many times with the new update_binary file as well, but no luck :crying:
---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
will the small ota brick the phone by this method?
k4fari said:
will the small ota brick the phone by this method?
Click to expand...
Click to collapse
Don't use OTA-MF, you should use FullOTA-MF zips.
mankindtw said:
Don't use OTA-MF, you should use FullOTA-MF zips.
Click to expand...
Click to collapse
i was using full ota mf 8.0.0.126(c185). but was not able to get any success, i am continuously trying since the last 7 to 8 hours:crying:
check the repack.bat plz

Tutorial(downgrade8.1.0=>7.1.1)use nougat stok/custom-roms on Oreo BC-12 bootloader

Tutorial(downgrade8.1.0=>7.1.1)use nougat stok/custom-roms on Oreo BC-12 bootloader
This tutorial is for the users wich are not satisfied by Oreo 8.1.1 rom
Also can be used by users wich changed the touchscreen from some reazons
and on Oreo 8.1.1 this new touchscreen not work​
First got to Settings/System/Developer option and chec OEM-unlockin to be ENABLED!
for flashing twrp-recovery may be need to unlock the bootloader by code but it should work only with OEM-unlocking enabled
Downgrading with FASTBOOT!
1) Charge youre phone to at least 50-70%, better is 100%
2) Download the FILES necessary for downgrading
3) Reboot the phone in bootloader and connect to the pc
4) Opend the terminal and write "fastboot" or "mfastboot" depends by your instaled fastboot
5) Copy/Paste in terminal the lines writed in "fastboot-mfastboot.txt" atached to files
or write them one by one and press ENTER
WAIT 'till it finish
6) In bootloader screen, from buttons vol-up & vol-down navigate and set to "reboot recovery" and press Power
Phone should boot in TWRP-recovery!
Now you have to install a custom-rom or a stok-rom TWRP flashable with Install option
""for this use the instruction to install posted by the developer of each rom""
Also you can RESTORE an older 7.1.1 backup made before update to OREO
Reboot and enjoy by nougat-7.1.1 rom on oreo-8.1.0 bootloader
Downgrading with TWRP
Files to be flashed with TWRP for the users wich have olready the TWRP-recovery instaled!
1) Download the files
2) Copy the zip archive on the sdcard
3) Reboot the phone in TWRP-recovery
4) Search and install the zip
5) Install nougat 7.1.1 rom or restore an older backup made before update to OREO
Enjoy!
reserved
Thank You very much
---------- Post added at 06:02 PM ---------- Previous post was at 05:38 PM ----------
vaserbanix said:
This tutorial is for the users wich are not satisfied by Oreo 8.1.1 rom
Also can be used by users wich changed the touchscreen from some reazons
and on Oreo 8.1.1 this new touchscreen not work​
First got to Settings/System/Developer option and chec OEM-unlockin to be ENABLED!
for flashing twrp-recovery may be need to unlock the bootloader by code but it should work only with OEM-unlocking enabled
Downgrading with FASTBOOT!
1) Charge youre phone to at least 50-70%, better is 100%
2) Download the FILES necessary for downgrading
3) Reboot the phone in bootloader and connect to the pc
4) Opend the terminal and write "fastboot" or "mfastboot" depends by your instaled fastboot
5) Copy/Paste in terminal the lines writed in "fastboot-mfastboot.txt" atached to files
or write them one by one and press ENTER
WAIT 'till it finish
6) In bootloader screen, from buttons vol-up & vol-down navigate and set to "reboot recovery" and press Power
Phone should boot in TWRP-recovery!
Now you have to install a custom-rom or a stok-rom TWRP flashable with Install option
""for this use the instruction to install posted by the developer of each rom""
Also you can RESTORE an older 7.1.1 backup made before update to OREO
Reboot and enjoy by nougat-7.1.1 rom on oreo-8.1.0 bootloader
Downgrading with TWRP
Files to be flashed with TWRP for the users wich have olready the TWRP-recovery instaled!
1) Download the files
2) Copy the zip archive on the sdcard
3) Reboot the phone in TWRP-recovery
4) Search and install the zip
5) Install nougat 7.1.1 rom or restore an older backup made before update to OREO
Enjoy!
Click to expand...
Click to collapse
Also, can I flash Stock Nougat (using fastboot) after this? And is there any chance of my device being hardbricked?
ShattrdChain said:
Thank You very much
---------- Post added at 06:02 PM ---------- Previous post was at 05:38 PM ----------
Also, can I flash Stock Nougat (using fastboot) after this? And is there any chance of my device being hardbricked?
Click to expand...
Click to collapse
No! you cant flash a full nougat rom with fastboot.
Bootloader cant be downgraded!
for hardbricked phones you have first to boot it using the sdcard img.
then when you get bootloader working without sdcard, can use this tutorial
Sent from my Moto G (5S) using Tapatalk
vaserbanix said:
No! you cant flash a full nougat rom with fastboot.
Bootloader cant be downgraded!
for hardbricked phones you have first to boot it using the sdcard img.
then when you get bootloader working without sdcard, can use this tutorial
Sent from my Moto G (5S) using Tapatalk
Click to expand...
Click to collapse
Oh ok. Thank You very much
I successfully rolled back to 7.1 using this method. No errors or issues. Everything worked flawlessly. A big thank you @vaserbanix
What are the problems with 8.1? I'm still on Android 7 (RETEU)
Argon007 said:
What are the problems with 8.1? I'm still on Android 7 (RETEU)
Click to expand...
Click to collapse
1. Oreo Battery drains considerably faster than 7.1. (But charges faster too)
2. Fingerprint unlocks slower than 7.1
3. Lags slightly when doing intensive tasks.
Now we need a maintainer for (a) Nougat rom(s)..
Ænimal said:
Now we need a maintainer for (a) Nougat rom(s)..
Click to expand...
Click to collapse
YES indeed!
Im in 8.1.1 stock rom. Can i install a custom 7.1.2 (ViperOS) with this method? Tks.
mysticauls said:
Im in 8.1.1 stock rom. Can i install a custom 7.1.2 (ViperOS) with this method? Tks.
Click to expand...
Click to collapse
lineage 14.1 work so it should work ViperOS too!
to be sure ask in ViperOS thread.
Thankyou!
Hello!
Do you lose biometrics by installing twrp?
vaserbanix said:
YES indeed!
Click to expand...
Click to collapse
LOS14.1 has been updated:
NEW BUILD: https://www.androidfilehost.com/?fid...63190603848665
Change log: November 18 Security Update
NOTE: Like so many other users, I too updated my device with OREO and stuck with that. I haven't tried downgrading it because I don't want to end up with a hard-bricked device once again. Point here is the new build is not tested. So please take a TWRP backup before using this build. Don't forget to post me even if works fine.
Thanks,
KS
Click to expand...
Click to collapse
EDIT: When I try to quote properly I get logged out for some reason, so see this thread obviously (and don't forget to thank @kalyansundhar ):
https://forum.xda-developers.com/moto-g5s/development/rom-lineageos-14-1-t3727918
Fantastic tutorial, vaserbanix. Thank you!
Does anybody know where can I get a nougat stock rom TWRP flashable? There is a thread with stock roms but all of them are only flashable via Fastboot...
I would like to get this in particular: [MONTANA_NPP26.102-49-14]
---------- Post added at 08:38 PM ---------- Previous post was at 08:13 PM ----------
ShattrdChain said:
I successfully rolled back to 7.1 using this method. No errors or issues. Everything worked flawlessly. A big thank you @vaserbanix
Click to expand...
Click to collapse
Thank you so much for your feedback, ShattrdChain! :good:
May I know what rom did you use for flashing with this method?
And do you know if bootloader needs to be unlocked in order to downgrade with this guide?
TWRP method doesn't work (bootloop), pls fix or delete.
FanderWasTaken said:
TWRP method doesn't work (bootloop), pls fix or delete.
Click to expand...
Click to collapse
i understand it work!
just chek the twrp version!
is posible the twrp to dont read some partitons.
this can make the differences betwen work or not
ask eric rutgers ( @GoldeneyeS2), he instaled sucesful that downgrade.zip
Thankyou!
vaserbanix said:
i understand it work!
just chek the twrp version!
is posible the twrp to dont read some partitons.
this can make the differences betwen work or not
ask eric rutgers ( @GoldeneyeS2), he instaled sucesful that downgrade.zip
Thankyou!
Click to expand...
Click to collapse
Its works great.
You can also use fastboot to downgrade!
can the downgrade be done without the bootloader unlocked?
the methods don't work for xt1799-2!

So has anyone figured out how to root the phone?

I've tried multiple rooting programs to try to root the phone, but none of them seem to work. So my question is, has anyone figured out a working method to get root? (I've unlocked the boot loader already)
TheRedPandaSSN said:
I've tried multiple rooting programs to try to root the phone, but none of them seem to work. So my question is, has anyone figured out a working method to get root? (I've unlocked the boot loader already)
Click to expand...
Click to collapse
I haven't been able to root it either. How'd u unlock the bootloader ?
greeneyez15o said:
I haven't been able to root it either. How'd u unlock the bootloader ?
Click to expand...
Click to collapse
If you go into developer options it allows you to unlock the bootloader.
TheRedPandaSSN said:
If you go into developer options it allows you to unlock the bootloader.
Click to expand...
Click to collapse
I don't think that completely unlocks the bootloader
TheRedPandaSSN said:
If you go into developer options it allows you to unlock the bootloader.
Click to expand...
Click to collapse
All that does is ALLOW the bootloader to be unlocked - it doesn't unlock it.
I just unlocked the bootloader
Used adb
"Fastboot flashing unlock"
Next im gonna try to apply root
Wish me luck
I have just ordered this phone. Will hopefully be able to share backup copies of ramdisk(boot) to be used with magisk to give root
Well if anyone is Interested in trying out mtk-su to get system-less, boot-less root it should work. It worked with my umidigi phone that also has mtk p70 soc. And running pie.
https://forum.xda-developers.com/android/development/amazing-temp-root-mediatek-armv8-t3922213
Here is device back up script project I had done based on that mtk-su.
https://github.com/mrmazakblu/Root-Backup-Helper
My test of using mtk-su did not work out.
But i do have backup copy of the stock boot.img , install magisk manager (currently i used V 7.3.4, after magisk update, V20 caused device trouble. Recommend stay with mahisk v19.3) and patch the boot.img from link below, then flash with "fastboot flash boot /file.name" to have full root.
here is stock boot file
https://androidfilehost.com/?fid=1899786940962604580
:::UPDATE::10-27
Successfully flashed magisk with twrp. But because the current twrp has no working touchscreen. It was done with ADB commands.
mrmazak said:
My test of using mtk-su did not work out.
But i do have backup copy of the stock boot.img , install magisk manager (use most recent version, currently i used V 7.3.4) and patch the boot.img from link below, then flash with "fastboot flash boot /file.name" to have full root.
here is stock boot file
https://androidfilehost.com/?fid=1899786940962604580
Click to expand...
Click to collapse
How'd u patch the boot.img ?
Thanks !!!
greeneyez15o said:
How'd u patch the boot.img ?
Thanks !!!
Click to expand...
Click to collapse
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
mrmazak said:
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
Click to expand...
Click to collapse
Sorry for the question, but wheres the option to patch local file?
---------- Post added at 01:25 PM ---------- Previous post was at 01:01 PM ----------
greeneyez15o said:
Sorry for the question, but wheres the option to patch local file?
Click to expand...
Click to collapse
I followed instructions, I keep getting error cannnot load 'patched_boot.img'
greeneyez15o said:
Sorry for the question, but wheres the option to patch local file?
---------- Post added at 01:25 PM ---------- Previous post was at 01:01 PM ----------
I followed instructions, I keep getting error cannnot load 'patched_boot.img'
Click to expand...
Click to collapse
I feel maybe I was too general in the steps. (not enough detail) sorry.
If you got to the part when it is loading patched_boot
then you got past the patching part.
so, you need to find the patched_boot.img . It should be in the download folder on device
copy this to your PC.
reboot phone to bootloader mode.
then open terminal in same window as the copied patched_boot.img file, or use the full path name in the command.
In the following example, the patched_boot.img file is saved in c:\adb
Code:
adb pull /sdcard/Download/patched_boot.img c:\adb\
adb reboot bootloader
fastboot flash boot c:\adb\patched_boot.img
fastboot reboot
mrmazak said:
I feel maybe I was too general in the steps. (not enough detail) sorry.
If you got to the part when it is loading patched_boot
then you got past the patching part.
so, you need to find the patched_boot.img . It should be in the download folder on device
copy this to your PC.
reboot phone to bootloader mode.
then open terminal in same window as the copied patched_boot.img file, or use the full path name in the command.
In the following example, the patched_boot.img file is saved in c:\adb
Click to expand...
Click to collapse
Got it !!! Had to reboot my computer ?
mrmazak said:
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
Click to expand...
Click to collapse
Does anyone manage to change the system file? when you try the phone freezes helps reboot
fafanakatr said:
Does anyone manage to change the system file? when you try the phone freezes helps reboot
Click to expand...
Click to collapse
Do you mean, flashing gsi image, or editing things on stock system. I have been focussed on tarp, and my tried either case.
I can do that soon and confirm if system is freeze.
OK, first time i tried to flash GSI here it is failed.
used fastboot flash system **gsi.img**
(phh v119)
it flashed without error, but will not go past bootloader splash screen. --ODD
will try again later
mrmazak said:
Do you mean, flashing gsi image, or editing things on stock system. I have been focussed on tarp, and my tried either case.
I can do that soon and confirm if system is freeze.
OK, first time i tried to flash GSI here it is failed.
used fastboot flash system **gsi.img**
(phh v119)
it flashed without error, but will not go past bootloader splash screen. --ODD
will try again later
Click to expand...
Click to collapse
I did everything according to the instructions that you suggested, and everything worked out for me, I got a root, but when I try to change the system files, the phone freezes, maybe the root is not full? Thanks for your work)
fafanakatr said:
I did everything according to the instructions that you suggested, and everything worked out for me, I got a root, but when I try to change the system files, the phone freezes, maybe the root is not full? Thanks for your work)
Click to expand...
Click to collapse
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
mrmazak said:
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
Click to expand...
Click to collapse
I will try to do as you suggested and let you know) I will be well waiting for your success
mrmazak said:
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
Click to expand...
Click to collapse
thank you very much I did everything according to the instructions and everything worked out for me,I tried to turn on the camera2api but so far without success,
can you understand this?

Categories

Resources