Anyone have success pairing these devices? I keep getting a cannot pair whether i use bt or nfc. Entering passcode 0000 as it says in the manual
Related
Hi all,
i recently upgraded my qtek 9090 to 1.42 (Tmobile posted BA_TMNL_14200_115_11300_Ship). I have major problems connecting to my handsfree set in my car. The first try to connect is successfull. I can pair with the handsfree device, enter the security code and everything is fine. The device appears in bluetooth manager under paired devices.
After disonnecting the paired devices rapidly gets lost. After that, theres no chance to connect to the device again. The only chance is to delete the bluetooth device in the manager and pair it again.
Despite to this, if have no problems with my gps mouse. Security is disabled, the device also don't appears in paired devices
Has anyone an idea ?
BT Version is 1.0.0 3900
I think I found the problem. Seems, that my handsfree set in my car still had the connect information of the former installation and I still use the same name for bluetooth. The handsfree set can save the connect information of 3 devices and two of them had now the same name but different id's. Seems, that was the problem. I'll test it for some days, but I'm sure, that was the solution
have fun
BT headset is paired but gets lost
my MDAIII has just been updated to the latest Tmobile upgrade.
Everything works ok. BT headset pairs and when i make a call i can speak. But when i receive a call the connection with the headset has a '?'
Now i first have to search to get a connection.
It's like it switches off the BT Headset connection when I receive a call.
Does anyone know how to solve this?
I can not pair my BT head set i-Tech R35 Clip to my new TD2, i get to the enter password part but they do not pair off. I have put the BT head set in to pairing mode.
Does anyone have any advise to get me paired off.
Thanx and regards
Chris
Pairing BT
there is two places you can pair your topaz with a BT headset.
1) link in comm manager over BT, not the switch part at the far right, but the bar where it says bluetooth. it'll take you to a screen where you can pair a headset.
2) in settings in the conection tab under bluetooth (or comm manager, BT and advanced), which is a multi tab that shows you the deviced paired, connected allow you to be discoverable the ports you created etc...
my point is for headset i have had problems conecting thru the advanced menu (2) but it worked thru the Comm conection, i don't even have to enter the key, it seems like it tryes 1234 0000... so i recommend going to the option 1, and there pairing your headset.
the other thing i noticed is when you pair a device, if you got the wrong key on the first atempt even if you enter the right one after it will not pair, so the solution is pressing back refresh and connect again and then enter the right key.
at least it worked for me
cheers
Timothy
Thanx for your guide, unfortunately it still will not connect. either option 1 or 2. I tried entering the pass code 0000 but it fails to connect and says the pass code was incorrect. If i try the option of no pass code it says it has connected, however the BT headset does not respond with hte usual 5 x flashes of the LED.
I still can not get connected :-(
Can anyone help me?
I'm trying to connect a jabra 3030 bluetooth headset with my x1. He finds the headset and i must enter the password. its an standard 0000. When i enter this and press ok i get the message pin incorrect, unable to connect. The device of my friend (htc) accepts the headset and can use it.
What can i do??
thanks in advance
i have that same headset and the phone does not even ask me for the password. The phone itself tries out the most common passwords (0000, 1234) and pairs the devices.
Merkaba said:
Can anyone help me?
I'm trying to connect a jabra 3030 bluetooth headset with my x1. He finds the headset and i must enter the password. its an standard 0000. When i enter this and press ok i get the message pin incorrect, unable to connect. The device of my friend (htc) accepts the headset and can use it.
What can i do??
thanks in advance
Click to expand...
Click to collapse
I have this problem totaly fixed with these Cyberon-SpeedDial+BluetoothFix
Nice Day
Wolfgang
That did it! finally i can use my headset!
thank you very much
oops wrong place to post.
I picked up my new car yesterday (Seat Ibiza) only to find that my N1 will not pair with the installed bluetooth handsfree system. I can find the kit when searching for bluetooth devices (picks up as Seat_BT with a headphones symbol alongside) however selecting the 'pair & connect' option results in a messagebox stating "There was a problem pairing with Seat_BT" - no PIN code is requested.
I've tested the car with other devices (laptop, other phone) and the pairing is successful.
I've checked the compatibility listing with Seat and they list (from Dec 2009) the Hero and Magic as compatible (as at Android v1.5). I've also seen posts in Seat forums indicating that the HTC Desire pairs successfully with the Ibiza handsfree option.
My N1 is stock, unbranded running 2.2.1.
Can anyone here give me some insight into the differences in the bluetooth stacks / known issues with N1 bluetooth that may help me resolve this?
Is there a way of logging bluetooth pairing requests that will help me find the root cause of this issue?
TIA
CodeMonkey said:
I picked up my new car yesterday (Seat Ibiza) only to find that my N1 will not pair with the installed bluetooth handsfree system. I can find the kit when searching for bluetooth devices (picks up as Seat_BT with a headphones symbol alongside) however selecting the 'pair & connect' option results in a messagebox stating "There was a problem pairing with Seat_BT" - no PIN code is requested.
I've tested the car with other devices (laptop, other phone) and the pairing is successful.
I've checked the compatibility listing with Seat and they list (from Dec 2009) the Hero and Magic as compatible (as at Android v1.5). I've also seen posts in Seat forums indicating that the HTC Desire pairs successfully with the Ibiza handsfree option.
My N1 is stock, unbranded running 2.2.1.
Can anyone here give me some insight into the differences in the bluetooth stacks / known issues with N1 bluetooth that may help me resolve this?
Is there a way of logging bluetooth pairing requests that will help me find the root cause of this issue?
TIA
Click to expand...
Click to collapse
I've resolved my own problem, so here's the approach for anyone else..
To pair the Seat kit with a Nexus One you need to do the following:
1. Find an app on the Android Market called "Bluetooth File Transfer" by Medieval Software
2. Install
3. Using the app (on the 'Remote Devices tab) initiate the pairing with the car
4. You will get the PIN prompt - enter the 1234 PIN
5. Once paired the app will begin transfering something (I think it's call history but not sure).
It will then report an error - don't worry about that.
6. Shutdown the app and uninstall it (it is no longer required).
7. Reboot the N1 (to clear out any remaining dregs of the app).
8. Phone should then connect and disconnect using the standard bluetooth functionality.
Not sure why this works, perhaps the app extends the default bluetooth stack, resolving the issue that prevents the prompt for the pair passkey.
I've not fully checked the level of functionality available, but I can definitely initiate a call to the last dialled number and answer incoming calls.
Can you tell me how can I pair the phone and a Logitech - Cordless MediaBoard Pro
im trying to pair but neither 0000 and 1234 code works.....
Im on android 2.3.7
What am i doing wrong thanks.
Found this post while trying to do the same thing
I checked the manual for the keyboard, and it reminded me that it was designed for PS3 and not running a normal bluetooth stack, so the pairing process is a little different.
Switch the keyboard off, switch it on, press reset. This makes the keyboard discoverable.
Tell your Android device to look for new devices, find the Mediaboard, try to pair.
Enter 0000 as the pairing code on your android. Then, type 0000[Enter] on the keyboard. You should now be paired.
Your phone should now list the keyboard as "Paired, but not connected" and you'll still not have a working keyboard, but you'll have made as much progress as I've made.
Let me know if you figure out how to connect!
When i try the 0000 it shows error during pairing.....