Related
As titled. I feel kind of cheated, as the water detection strip while underneath the flap but is not placed in a "fair" position, at least I don't think...
Long story short, the water detection strip next to the headphone jack is now red because I had the flap opened with the headphone plugged in and a bit of rain dropped onto the strip. It is a design flaw, at least in my eyes, as it is too exposed - should really have the strip INSIDE the headphone jack like the iPhone for fair water detection. Anyway, I'm not top pleased, and wondering if a bleach can help? Or any other methods?
Thanks in advance!!
Lord Farkward said:
As titled. I feel kind of cheated, as the water detection strip while underneath the flap but is not placed in a "fair" position, at least I don't think...
Long story short, the water detection strip next to the headphone jack is now red because I had the flap opened with the headphone plugged in and a bit of rain dropped onto the strip. It is a design flaw, at least in my eyes, as it is too exposed - should really have the strip INSIDE the headphone jack like the iPhone for fair water detection. Anyway, I'm not top pleased, and wondering if a bleach can help? Or any other methods?
Thanks in advance!!
Click to expand...
Click to collapse
Bump...
i have heard somewhere on here that bleach did work just put a bit on a cotton bud and just dab not rub and see if it works (whats the wost that can happen)
Try it out
Sent from my C6603 using xda app-developers app
brockyneo said:
i have heard somewhere on here that bleach did work just put a bit on a cotton bud and just dab not rub and see if it works (whats the wost that can happen)
Click to expand...
Click to collapse
Well i don't know, that's why I asked... was afraid it might turn black or something due to some special chemical reaction and was generally wondering if there're other methods of turning it back to white... :crying:
Dab some liquid paper on it
Sent from my C6603 using xda app-developers app
Lord Farkward said:
Well i don't know, that's why I asked... was afraid it might turn black or something due to some special chemical reaction and was generally wondering if there're other methods of turning it back to white... :crying:
Click to expand...
Click to collapse
Really at the end of the day, as horrible as it might sound your warranty many be compromised already with the strip being any colour apart from white.
There is also the possibility that Sony have something similar inside the phone to detect water entering the internals
Lord Farkward said:
Well i don't know, that's why I asked... was afraid it might turn black or something due to some special chemical reaction and was generally wondering if there're other methods of turning it back to white... :crying:
Click to expand...
Click to collapse
I remember bleach working on my one XL. only a tiny amount though, let us now how it goes.
Lord Farkward said:
As titled. I feel kind of cheated, as the water detection strip while underneath the flap but is not placed in a "fair" position, at least I don't think...
Long story short, the water detection strip next to the headphone jack is now red because I had the flap opened with the headphone plugged in and a bit of rain dropped onto the strip. It is a design flaw, at least in my eyes, as it is too exposed - should really have the strip INSIDE the headphone jack like the iPhone for fair water detection. Anyway, I'm not top pleased, and wondering if a bleach can help? Or any other methods?
Thanks in advance!!
Click to expand...
Click to collapse
I would contact them and ask, they may be more understanding than you think and ask you to send it in and have it checked and strip replaced if it is ok. Try and phone, they tend to be less scripted etc (this is UK at least, don't know for other countries Xperia helplines).
take it to a small licenced warranty repair shop if there is any around your area.
My old school Sony Ericsson walkman was fixed when water damaged because they get more money from it being a warranty repair then just being paid for labour and parts..
You got it wet, it's fact.
But this does not mean they won't do a warranty repair.
Sent from my C6603 using xda premium
Thanks for all the replies. Well, I tried, and the bleach turned it back to white
However, I wasn't being careful enough, as when I tried dipping a soaked cotton bud onto the strip, some of the solution went astray and may have came into contact with the copper-part of the earphone jack. Even after it had been dried out, the earphone jack couldn't detect my earphones anymore and playing music with my headphones in resulted in music playing through the phone's speakers instead.
Anyway, long story short, I thought I might as well bring the phone to the repair center and give it a go and see what they'll say. 4 hours later, they gave the phone back to me, with the earphone jack now working (all they did was update software to 253...), and said nothing about the phone being in contact with water. So....... kind of a success, I guess? What's bothering me now is still that I don't know why the earphone jack stopped working... It should be hardware-related, yet a software updated fixed it... hmmm....
They probably just replaced. the Jack and upgraded the software. to be sure
Sent from my C6603 using xda app-developers app
which bleach you used ?
yeah, bleach works, tried it before, apply with q-tip
Hello,
I have my Z from its release. I tried its water resistance the first day i recieved it, all was OK. I recorded many videos underwater, in swimming pool, at home, and everything was always ok. Everytime i took it in water, I mindfully closed all the covering caps.
But today, I got a problem. I took my phone with me to water, as whnever I did, and when I was looking at it after "bathing", my camera was fogged - it was wet INSIDE. I tried to check those white indicators under covering caps, and those at USB port and headphone jack were RED. I also noticed tiny droplets of water there. Everything else is however working. No display issues, headphones are playing, USB works too.
I must remark that my phone dropped me on pavement from my pocket about month ago (scratched corners), but its resistance worked until today.
What now? Should I claim it? What do you guys think? I bought Xperia Z mainly for its water resistance. It is very distressing that I can take it in water any more.
Edit: one problem detected - mobile data doesnt work.
Since the indicators are red you have nothing to stand on, they will just say that the flaps were open and you won't be able to prove them wrong.
Dsteppa said:
Since the indicators are red you have nothing to stand on, they will just say that the flaps were open and you won't be able to prove them wrong.
Click to expand...
Click to collapse
I read somewhere that on the repair service they check if the flaps provide the necessary seal against water. If they provide enough seal, and you have the indicators turned red, they blame you for not having closed the flaps correctly, on the other hand, if the flaps show defects and let water through, even when properly closed and with moisture indicators turned red, they still service your device under warranty.
Dsteppa said:
Since the indicators are red you have nothing to stand on, they will just say that the flaps were open and you won't be able to prove them wrong.
Click to expand...
Click to collapse
They were closed. I was always checking them before going in water. Im 100% sure. And yes i can prove it. They can close the flaps and test phone and see if there is water or not.
Dropping the phone may have caused an open gap somewhere and water leaked in.
Nothing you can do, just argue your way in and hope for the best.
If you know you are a clumsy person, you should have gotten a case.
Sent from my C6603 using xda premium
In the pictures the phone has a the back glass lifted, maybe that was the problem. I have the back lifted too , but not that high as yours.
Don't tell them you used it in the swimmingpool, it clearly says in the instruction booklet that you should't.
Swimmingpool water contains acids and chemical products that may destroy the rubber seals over time.
I think I know what happened. Flaps may be ok (I tested to put the phone in water again - there were no water under them, but water still got to a phone - my volume down is damaged now), but the right issue is that back plate is raised a bit around the camera
Type "Sony Xperia Z repair, disassembly manual" on youtube.
As you can see on this video, right under the plate are phone GUTS. The plate can be raised by warming it. Thus it can raise when you play games or a sun is shining on a phone. All Xperia Z owners, check your back plate too if it is OK or raised! I believe this is that water resistance issue..
The fog in camera disappeared during the day and when I removed SIM and put it back, mobile data begun to work. Bad thing is that volume button doesnt work (as I said above). The button itself is ok and its not stucked or pressed, but when I turn phone on, it always starts in safe mode and I cant volume down, I can just volume up (using the button; I can volume down using display), so I think button contacts are fu**ed and phone thinks the buton is pressed. I think only thing I can do now is going to repair service.
I could never imagine submersing my phone in water. not worth the risk.
I treat my XZ as water resistant. I'll text people when im in the bath with wet hands etc.. but never put it in water
eiestsa never
vibecatalin said:
In the pictures the phone has a the back glass lifted, maybe that was the problem. I have the back lifted too , but not that high as yours.
Click to expand...
Click to collapse
Yeah, you are right. I think thats the issue. Did u try to put it in water if it is ok or not?
I've read somewhere of someone using bleach on a cotton bud VERY carefully to whiten the markers.
I had a similar issue, take it to the service center & get it fixed.
VykoJust said:
Yeah, you are right. I think thats the issue. Did u try to put it in water if it is ok or not?
Click to expand...
Click to collapse
No, but I think I will try.
vibecatalin said:
No, but I think I will try.
Click to expand...
Click to collapse
Those flaps are piece of crap. Especially that flap where charger/data cable go. Since we playing with it every day, my guess is that sealing got weaken and that's why water got thru the phone. Gap may be less than tenth of a millimeter ( <0,1 mm) and water can easily come in.
i think it's time again to bash those people who warn others not take their phone into water, as the xperia z is not waterproof, but just water resistant. and that's more likely to protect the phone from accidental drops into water, rather than to go diving/bathing/filming with it in water.
and those warners know what the IP-rating says ("...half an hour"..."submerged 'till half a meter"....)
hebbe said:
i think it's time again to bash those people who warn others not take their phone into water, as the xperia z is not waterproof, but just water resistant. and that's more likely to protect the phone from accidental drops into water, rather than to go diving/bathing/filming with it in water.
and those warners know what the IP-rating says ("...half an hour"..."submerged 'till half a meter"....)
Click to expand...
Click to collapse
If people actually followed that advice, then there would not be multiple threads like this one, where people have destroyed their phone.
What is the point of deliberately putting your expensive phone in danger, IP rating or no IP rating?
Sent from my C6603 using Tapatalk 2
kingvortex said:
If people actually followed that advice, then there would not be multiple threads like this one, where people have destroyed their phone.
What is the point of deliberately putting your expensive phone in danger, IP rating or no IP rating?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
gosh, not this discussion again! It does not matter what the point is or if there is a point or not. If the producer communicates that this phone CAN sustain without damage being in water i-don't know-how-deep for i-don't know-how long, then this phone SHOULD do it. The intentions of the users, or whether there is a point or not in taking your phone to the swimming pool, are NOT important. It is IMPORTANT that whatever was promised to the user SHOULD BE VALID.
tudork said:
gosh, not this discussion again! It does not matter what the point is or if there is a point or not. If the producer communicates that this phone CAN sustain without damage being in water i-don't know-how-deep for i-don't know-how long, then this phone SHOULD do it. The intentions of the users, or whether there is a point or not in taking your phone to the swimming pool, are NOT important. It is IMPORTANT that whatever was promised to the user SHOULD BE VALID.
Click to expand...
Click to collapse
Perhaps you have a point, but if you go to a service centre with red water ingress indicators, you will be paying to have your phone repaired as they will say it was caused by user negligence. End of story.
If you do not put your phone into water for no good reason, it will never get water damaged. Why are people using the IP rating to excuse a complete lack of common sense?
Why do people NEED to put their phone into water regularly?
Sent from my C6603 using Tapatalk 2
kingvortex said:
Perhaps you have a point, but if you go to a service centre with red water ingress indicators, you will be paying to have your phone repaired as they will say it was caused by user negligence. End of story.
If you do not put your phone into water for no good reason, it will never get water damaged. Why are people using the IP rating to excuse a complete lack of common sense?
Why do people NEED to put their phone into water regularly?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
because they bought the phone with the intention that they can do this with it. They've seen it in official Sony commercials (phone used during rain, phone washed under running water after being splashed with color paint, on exhibitions Sony employees dropped it in aquariums, smashed the phone on the floor repeatedly to demonstrate that the glass won't break). I heard that in some shops they even have the Z in a water tank all the time and only take it out for charging. There was that show in Czech Republic where two models used the phone under the shower and so on.
The phone has an ip57 rating which clearly states that you can submerge it into water for 1m and up to 30 minutes. I also believe that you can leave it there for much longer and it SHOULD be okay, only the depth is important. The deeper you go, the higher is the water pressure and the seals might leak.
Now, cars also have ip ratings for water protection and different levels for the interior of the car and the outside. Inside it might be ip54 (water, mud and splashes when entering the car with wet shoes or boots) and outside it's even ip59 or ip58K which means it's protected against water ingress when used with high pressure water jets (e.g. car wash!).
I'm sure most people would complain, if there brand new car is flooded with water on the inside after they went to car wash. The same is true for this phone!
An ip rating is an ip rating and not like "buhu, it's ip57 but it can only manage 3 drops of water before it breaks!". If that is the case, I could have keept my S2 which also survives a few drops of rain without damage. If Sony can't manage that, they shouldn't have advertised it like that or given an ip54 rating or something lower.
You can't claim your phone has the SECOND HIGHEST protection against water there is and then say: "Stay away from water". It's like: "your car has 6 airbags, but don't expect them to work in a crash" or "your Porsche can go 300 km/h, but don't ever try it"
People put their phone in water because they can and should be able to.
If the XZ can't and should be used in water, I'm sure most people would have bought a non water proof phone instead because it would be the same. I was drawn to this phone because of it's water resistance.
I'm beeing very paranoid and bought a 5€ waterproof bag for my phone which I tested yesterday for 6 hours submerged in the sink. The paper inside stayed perfectly dry. Even though my XZ should be waterproof on its own, I think double protection is always better. The bag seems to be waterproof, and even if by some chance it is not, then my phone won't be damaged, because it's supposed to be waterproof too!
With this double protection, I'm still afraid to take it to the pool, but might do so eventually which I wouldn't have done without the bag.
Yes, you do have a point. At least somewhat anyway.
For a start, the manual tells you to avoid chlorinated water. So no swimming pools. I wonder if this is why the water resistance appears to have failed in this case.
I could point out other things that the manual tells you to avoid, but everyone here has already read it before going swimming with their phone, right?
Sent from my C6603 using Tapatalk 2
USA Today have an article (here) where the reviewer was testing the S4 Active. Right after he dunk the phone underwater, the phone have WATER DAMAGE:
Shortly after I took the phone for a dip (in not very deep water), the display went kaput — at least for several hours. It lit up just long enough to indicate that I had power, but I couldn't actually keep the display on and use it.
Roughly a day later, the screen came alive again, but the phone was still exhibiting finicky behavior, presumably because of water damage. The touch-screen was messed up and the device acted as if headphones were plugged in when they weren't. If this were my actual phone, I'd return to the store for a replacement.
I just got the S4 Active and thought I am not planning to take the phone for a long underwater activities, I am concerned that I am getting a phone that have a very weak water resistant feature.
Not sure if this is because the reviewer didn't "properly" close the battery cover / USB port, but I have seen S4 Active review and Samsung Event videos where the phone was submerged in water for a long time and it still works.
PS: Have ANYONE tried to dunk their phone in the water for testing?
My phone has been in a pool, lake, bathtub, rainy weather, all since I got it. I trust it.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2
I'd like to think that reviewer just got stuck with a bad unit.
But this begs the question: Is water damage covered under warranty? Either by AT&T or Samsung? Surely they should back up their "vacation-proof" phone..
aceownstheworld said:
My phone has been in a pool, lake, bathtub, rainy weather, all since I got it. I trust it.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2
Click to expand...
Click to collapse
My first one went into the pool just fine. The unit I have now I am scared to expose it. On the top between the glass and bezel there is a small gap... above the in call speaker.... I'm afraid that water will pour in through that... Can you look at yours and see if yours is like that?
He probably didn't press down the back cover correctly.
Sent From My Galaxy S4 Active using a Tapatalk 4
joshuadjohnson22 said:
My first one went into the pool just fine. The unit I have now I am scared to expose it. On the top between the glass and bezel there is a small gap... above the in call speaker.... I'm afraid that water will pour in through that... Can you look at yours and see if yours is like that?
Click to expand...
Click to collapse
You mean between the earpiece and the bezel at the front? I don't see any gaps, at least not with my naked eyes.
On the back, bottom part near the speaker, I don't see it either. Trying to press to see if there is a gap, so far none.
What makes you "scared" on the phone that you have now?
robstunner said:
He probably didn't press down the back cover correctly.
Sent From My Galaxy S4 Active using a Tapatalk 4
Click to expand...
Click to collapse
There is a sticker on the back cover that provide a warning for the user to PRESS DOWN on the middle of the cover, underneath the LED.
I always do that, but I never hear a "click" or any indication that the back cover is now PROPERLY covering the phone to prevent water leakage.
Well, I DO hear the click when pressing on all sides, but that's normal like my Galaxy Note.
lanwarrior said:
You mean between the earpiece and the bezel at the front? I don't see any gaps, at least not with my naked eyes.
On the back, bottom part near the speaker, I don't see it either. Trying to press to see if there is a gap, so far none.
What makes you "scared" on the phone that you have now?
Click to expand...
Click to collapse
Yeah on the front top. I just think water will easily get in the phone...
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
I've used this phone below the 1 meter mark and the only bad side effect I get is the microphone not working well for a bit afterwords, which happens really at any level of exposure. This phone is pretty safe in water if you use it correctly.
mattpayne92 said:
...the only bad side effect I get is the microphone not working well for a bit afterwords...
Click to expand...
Click to collapse
That is pretty bad. I mean, I am not going snorkeling and take a phone call while floating on the shore, but if somebody calls me and I CANNOT talk to them because the microphone does not work, that is a big problem.
I am actually wondering how does the phone protects the microphone, earphone and speaker? There are holes there and water can go in. I was considering the Xperia Z and so far the only problem with water issue is the microphone jack - the phone will think that the jack have a headphone but it's only water. However, that is easily fixable by drying it out. I.e. use tissue or something that goes inside the jack.
Microphone though, the holes are to tiny to "dry" with a tissue or something.
BTW, is the microphone STOPS working completely or it works again after a FEW DAYS?
Maybe I can ask those who read this thread to tell me if:
A). You HAVE tested your phone under water (splashing it, dunking it in a bowl of water)
B). What ISSUE you have after you did the above? Phone dead, microphone stops working, etc.
I am trying to get a sense if this is just a specific batch issue (I can replace the phone) or design issue (no matter what, the issue still exists).
If it really was then it would have lifetime warranty. The fact that it only has 1 year warranty like most of the phones tells me that after year 1 be ready to say bye bye to your baby
Sent from my SGH-I337
lanwarrior said:
Maybe I can ask those who read this thread to tell me if:
A). You HAVE tested your phone under water (splashing it, dunking it in a bowl of water)
B). What ISSUE you have after you did the above? Phone dead, microphone stops working, etc.
I am trying to get a sense if this is just a specific batch issue (I can replace the phone) or design issue (no matter what, the issue still exists).
Click to expand...
Click to collapse
Decided to take mine in the shower to test after it got here.
I let the showerhead spray onto the phone, both front and back. Nothing wrong.
Like other people reported, the speaker volume gets significantly lower when wet and goes back to normal within a half hour. Also if the headphone port gets water in it it will errenously display that "headphones are connected" which blowing into the port will fix.
thatbigmoose said:
Decided to take mine in the shower to test after it got here.
I let the showerhead spray onto the phone, both front and back. Nothing wrong.
Like other people reported, the speaker volume gets significantly lower when wet and goes back to normal within a half hour. Also if the headphone port gets water in it it will errenously display that "headphones are connected" which blowing into the port will fix.
Click to expand...
Click to collapse
This is useful! BTW, you haven't test submerging the phone, have you?
maldinimi said:
If it really was then it would have lifetime warranty. The fact that it only has 1 year warranty like most of the phones tells me that after year 1 be ready to say bye bye to your baby
Sent from my SGH-I337
Click to expand...
Click to collapse
No it won't, because all things mechanical / electronics break downs eventually - nothing last forever. Even mil-spec stuff does not have a "lifetime" warranty.
lanwarrior said:
This is useful! BTW, you haven't test submerging the phone, have you?
Click to expand...
Click to collapse
I haven't submersed it yet but there's videos on YouTube with submersion and it brings about the same issues I discussed.
Higher water pressure will clog the mic membrane and make you sound distant in phone calls.
Maybe I'll build up the courage to dunk it tomorrow.
I did the dunk test the night after I got it by fully submerging it in a cup of water...worked just fine afterwards...although I was showing a friend that didn't believe that I had a "water proof/resistant" phone by putting it in the sink and letting water run over it and had an issue with the phone thinking the headphones were plugged in.only did it for about an hour...weird thing was that it didn't start doing it until about 2 hours after it had been wet. Although once it fully dried I haven't had any issues at all with it. Hope this helps.
Sent from my GT-N5110 using XDA Premium HD app
lanwarrior said:
That is pretty bad. I mean, I am not going snorkeling and take a phone call while floating on the shore, but if somebody calls me and I CANNOT talk to them because the microphone does not work, that is a big problem.
I am actually wondering how does the phone protects the microphone, earphone and speaker? There are holes there and water can go in. I was considering the Xperia Z and so far the only problem with water issue is the microphone jack - the phone will think that the jack have a headphone but it's only water. However, that is easily fixable by drying it out. I.e. use tissue or something that goes inside the jack.
Microphone though, the holes are to tiny to "dry" with a tissue or something.
BTW, is the microphone STOPS working completely or it works again after a FEW DAYS?
Click to expand...
Click to collapse
Maybe leave the phone in the sun for a few minutes to dry? Blow on it? Several things help get the water out. But honestly, how often are you going to go swimming with a phone and then take a call immediately afterwards? I'd be thrilled that my phone didn't fry after it fell in the pool, I could care less that the microphone doesn't work for an hour - that's what bluetooth headsets are for.
Anyways, I've had my phone submerged in a sink with running water twice now, the only issues I've found is that after removing the back cover there is water on the outside of the rubber gasket, which looks normal, but I would recommend taking the back off to dry it out after exposed to water.
When i took mine into the pool I made a phone call right after and they said I sounded funny so i blew in the mic and it cleared the water out and they could hear me fine....
geoff5093 said:
But honestly, how often are you going to go swimming with a phone and then take a call immediately afterwards?
Click to expand...
Click to collapse
Not very often, but when I DO need to take that call, it will be a big problem. This is a phone after all.
I don't think I will purposely take the phone for a swim, but the reason I bought the Active instead of the S4 is because of the water/sand protection and want to confirm it works. If it doesn't, then I'll exchange the phone to a normal S4 because it's thinner.
However, based on your response and others, it seems it does offer those protection to a certain degree and the ONLY issue is that the mic may get covered with water and cause the caller not being able to hear me, but this is easily fixed QUICKLY.
So I got my new Z3C and was thinking: what if we can make flaps and audio port more waterproof?
Doing pressure sensor test I get reading around 1000 and it's increasing by about 30-40 when I press against screen with closed flaps. But it normalizes after 1-2 seconds and goes back to initial reading meaning tiny amount of air escapes. Does it mean my phone is not totally waterproof? Don't know.
Since this phone is just fresh-water proof (meaning no using in pool or sea) and I really want to use it worry-free in all kind of water that I dare to go in myself I really want to improve waterproofness.
I'm not worried about front and back since glass should be all.kind-of-things-proof. This leaves sd card and sim card covers, audio jack, mic holes and speakers.
So what I thought of was to "grease" flaps' rubber o-rings with rubber compatible oil/grease to make better contact with phone body or use some kind of silicone spread around rubber contact area before closing flaps to have semi-permanent seal and be still able to open and scrub extra stuff off without doing much damage.
For audio jack I thought to make some kind of plug - like pressy button but with a bit bigger "head" that has soft sticky rubber underneath so when pressed in it makes a seal with the edge of audio jack or even plug that is covered with silicone all the way.
Speakers and mic holes could be protected with bits of strong adhesive tape - it's easy to get sticky stuff off the glass and it'll be possible to hear some sound even with speakers covered. Not sure about mic holes because side plastic has matte finish but some strong adhesive should still stick?
So the question - has anyone tried something remotely related? Is it thinkable? Have I missed anything important? What materials (grease, silicone) should I use?
If anyone has done something similar? Probably... But no one ever posted about it on this forum. You can use the phone in the sea and swimming pool, as long as you rinse the phone afterwards. As for modifying the phone, I wouldn't do it. It might cause you to lose your warranty.
In terms of waterproofing the phone even more, I'd look at waterproof cases made for other phones with almost similar dimensions and see if you can do something about the case instead.
Sent from my D5803
Dsteppa said:
You can use the phone in the sea and swimming pool, as long as you rinse the phone afterwards. As for modifying the phone, I wouldn't do it.
Click to expand...
Click to collapse
Plenty of stories of people going in the water, damaging their phone and fighting with sony about warranty.
It's hardly modifying, adhesive sticker on glass is easily removed and thin film of silicone should be also easily removable.
Dsteppa said:
It might cause you to lose your warranty.
Click to expand...
Click to collapse
Yeah... getting water inside causes that too.
Dsteppa said:
In terms of waterproofing the phone even more, I'd look at waterproof cases made for other phones with almost similar dimensions and see if you can do something about the case instead.
Click to expand...
Click to collapse
That's the option. But I haven't seen any slim waterproof case that could be comfortably used all the time.
Anyway, curiosity is strong and I'll most likely try different options.
PS. can someone test pressure sensor - is reading staying high when screen is pressed or it fades back to normal with all covers closed?
I've just used mine in pool all weekends since I bought it without any issue and even without afraid of doing that! The same with my wife's Z1!
And I'm contantly opening/closing its usb port due my xposed modules development (debugging purposes)! Maybe some unlucky day I will screw it... who knows!
Ofc we always need to be sure all ports are properly closed before going to have fun!
kalamees1 said:
Plenty of stories of people going in the water, damaging their phone and fighting with sony about warranty.
It's hardly modifying, adhesive sticker on glass is easily removed and thin film of silicone should be also easily removable.
PS. can someone test pressure sensor - is reading staying high when screen is pressed or it fades back to normal with all covers closed?
Click to expand...
Click to collapse
Sorry, I forgot about the pressure sensor part, it's normal that the numbers go back to normal after you lifted your finger, it works like that for everyone.
If my mind serves me right, I've seen Sony ads with the Z3C being thrown in a pool or something similar, so a pool really shouldn't be a problem. And yes of course people will have to fight for their cause at Sony, they won't just put any phone under warranty, else people would exploit that.
Dsteppa said:
Sorry, I forgot about the pressure sensor part, it's normal that the numbers go back to normal after you lifted your finger, it works like that for everyone.
Click to expand...
Click to collapse
I probably expressed myself bit vaguely. Thing is that pressure reading on my phone returns back to normal WHILE HOLDING screen under pressure. Initially pressing screen creates greater pressure inside the phone, reading rises but air escapes quite quickly (1-2seconds) and pressure reading normalises. After releasing finger screen pressure sensor shows lower readings for a second until extra air seeps inside to equalise pressure again.
Hope it's clear enough.
Also, does it mean that I got less waterproof phone that it should be?
I dunno about you but i've been using my camera in the pool for a while now and even for hours at times
Sent from my D5833 using XDA Free mobile app
I've used mine under water as well. OP if you're really worried about it you can send it off to liquipel and have them make the phone even more waterproof
Hey guys,
I know the Rog Phone 2 does not have any IP certification for water resistance. I'm buyin one but I'm afraid to use it in the bathroom ( I usually leave my phone playing music on the counter). Do you guys think the water vapors could damage the phone?
Does the sim card tray have any rubber seal inside? That could be a clue if Asus tried at least to include some protection
regards
rdrlima said:
Hey guys,
I know the Rog Phone 2 does not have any IP certification for water resistance. I'm buyin one but I'm afraid to use it in the bathroom ( I usually leave my phone playing music on the counter). Do you guys think the water vapors could damage the phone?
Does the sim card tray have any rubber seal inside? That could be a clue if Asus tried at least to include some protection
regards
Click to expand...
Click to collapse
I doubt water vapor would hurt it, but I wouldn't get it wet. The vent on the back of the phone is supposed to be a real vent on the ROG Phone 2, which means it's open to the internal circuitry.
I'm not going to be too concerned about that. I bring my LG V20 in all the time and it's not rated either. I just stick it on a low shelf since the steam rises, and keep the exhaust fan on.
As for the vent, I didn't think it opened into the bare circuitry. I thought it went into the cooling chamber or whatever it is, surrounded by the copper
Dude, dude, seriously dude!
I dont care if its IP-68, ip one hundred, thousand, gazillion.\;
Electronic devices are not suppose to be anyway near water, they don't belong at the beach, pools and worse of all; when your taking a crap in the bathroom (yuck).
i was being sarcastic, but on a serious note,
this phone has open gaps in its housing for ventilation, this is not ideal for the bathroom, consider buying a Bluetooth speaker water/condensing resistant.
I’ve also ordered the rog 2. Was thinking about this also. I’m sure it has some resistance although no IP certification.