Database Develop

Need help with my p9 eva-l09

Hello
im new to huawei. buy the phone 2nd hand.
the phone has installed eva-l09c432b378.
the problem is i cant add my google account, have no camera, no keyboard,
did the factory reset several times, cache too-nothing.
now i have make a rollback, so im on c900b300 but it is the same- no camera, no keyboard,....
can anybody help, please?

Next step is flash firmware full rom eva-l09c432b136.
Wysłane z mojego EVA przy użyciu Tapatalka

darrr1 said:
Next step is flash firmware full rom eva-l09c432b136.
Wysłane z mojego EVA przy użyciu Tapatalka
Click to expand...
Click to collapse
nothing. im still on c900b300-no camera, etc..
any idea?

how you flash? what large was folder upload?

darrr1 said:
how you flash? what large was folder upload?
Click to expand...
Click to collapse
2.42gb
i flash it with the dload method-force update external sd card-dload foder-update.app.

after unzip all files has over 4 gb

darrr1 said:
after unzip all files has over 4 gb
Click to expand...
Click to collapse
yes . and after first one nothing.
am i doing something wrong ?i have to install each ohe seperate, or not?
but like i say the installer in the foce update says failed wrong package or sš.

you should read rollback instruction first.
flashing download mode start with turn on phone pushing 3 buttons simoultanously : vol - , vol+ and power on

darrr1 said:
you should read rollback instruction first.
flashing download mode start with turn on phone pushing 3 buttons simoultanously : vol - , vol+ and power on
Click to expand...
Click to collapse
yes im am doing it 3 buttons combo.
im now again on c432b378 AGAIN, NO KEYBOARD, NO GOOGLE ACCOUNTS, NO CAMERA, NO MOBILE DATA.
PLEASE HELP!!

1. flash rolback package ( 3 buttons metode)
2. flash eva-l09c432b136 full firmware (3 buttons metode)
3. in recovery full wipe and next cache , dalvik wipe.

bobbysnitch said:
nothing. im still on c900b300-no camera, etc..
any idea?
Click to expand...
Click to collapse
How did you get update? I'm still on c900b180
Poslato sa EVA-L09 uz pomoć Tapatoka

try to use eRecovery first to get it back to stock firmly.
If it doesn't work, follow exactly what darrr1 said.

swedenboy said:
try to use eRecovery first to get it back to stock firmly.
If it doesn't work, follow exactly what darrr1 said.
Click to expand...
Click to collapse
hi
i solve the problem.
the c432b136 didn work for me...have tryin it several times.
then i download the c432b182 from a huawei bolgaria site.
installled on c900b300.
now finally everything works.
thanks for support! :good: :good:

BaneX_991 said:
How did you get update? I'm still on c900b180
Poslato sa EVA-L09 uz pomoć Tapatoka
Click to expand...
Click to collapse
hi
i did the rollback from android 7 to 6.
if you install it via dload+force update then you are on c900b300.

It is root necessary for that?
Poslato sa EVA-L09 uz pomoć Tapatoka

BaneX_991 said:
It is root necessary for that?
Poslato sa EVA-L09 uz pomoć Tapatoka
Click to expand...
Click to collapse
hi
for rollback? no! so far i know you must be unrooted and stock recovery installed and emui 5 mit andoid 7.
see in the link bellow.
https://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091

No, to update on 7.0. Because c900 doesn't get update on N.
Poslato sa EVA-L09 uz pomoć Tapatoka

HUAWEI P9 Europe original Firmware EVA-L09C432B136 to latest Nougat 7.0
HUAWEI P9 Europe original Firmware EVA-L09C432B136 to latest Nougat 7.0 (no missing camera etc!)
The file is available from my personal website no bull**** hit the link fast download.
https://everwijn.info/Firmware_HuaweiP9_EVA-L09_B136.zip (2,6 gig)
Extract the dload folder from the zip file to youre sdcard on youre phone (no sdcard then phone root)
Hold down at the same time the buttons volume up volume down and power button, youre phone boots, keep it pressed until you see the EMUI logo updating! This take a wile, also after reboot. After that fresh install screen select lanuage etc.
Notice if you have wifi with maccadress security, disable this, the maccadress on youre phone will change after update.
Go to settings, scroll down, select update, hit below the image EMUI update, let it go, it wil auto reboot after downloading. After reboot wait be patient apps wil be updated, and proceed the same step settings update etc.
Repaeat this until no updates available, then go to settings phone info and see 7.0 installed.
See screen dumps:
https://everwijn.info/HuaweiP9-Info.png
https://everwijn.info/HuaweiP9-Screenshot.png
If you use macadress filter on wifi now you can enable that future, phone mac wil be the same.
Easy the only way to update P9 people try it!
Greetinx from The Netherlands
Hans Everwijn

Your has device has failed verification

Hi still a newbie so please bare with me.
Have tried s hard reset no joy because it's saying that my P9 your device has failed verification and may not work properly.
This was after updating to 7.0 which worked for about 10 mins then this happened
Any help much appreciated thanks

Dc phonix is good software for all the problems

1. Are you or have you ever been rooted? if yes then see question 2. If no then you have bricked your phone somehow, need to restore using one of the methods described in the various threads in the forum. Download official image, use dload method etc.
2. Does the phone boot to Android? If yes then that message is normal. If no then see question 3
3. You need to restore the original boot image and relock your bootloader. If you don't know how to do either or what any of that means then refer to the alternative answer in question 1 and then stop messing with your phone until you learn how to do literally everything with it using the forum.
I realise that sounds harsh, but it's the truth. Too many people bricking perfectly good phones because they don't care to read or learn before they act.

My suggestion would be to rollback and flash b136 on MM then update.. but ensure u are on C432
Enviado desde mi EVA-L09 mediante Tapatalk

[Q] loosing USB Debug option all the time

Hi there
After some time (don't know how much but not a lot) USB Debug goes back to OFF. Seems like a time out and it's boring.
Any way to let it ON ?
Thanks!

I'm having this error too

This happens to me every time I leave Developer Options.
Enviado desde mi PRA-LX1 mediante Tapatalk

metabolito said:
This happens to me every time I leave Developer Options.
Enviado desde mi PRA-LX1 mediante Tapatalk
Click to expand...
Click to collapse
On mine, too.

sambastrakan said:
Hi there
After some time (don't know how much but not a lot) USB Debug goes back to OFF. Seems like a time out and it's boring.
Any way to let it ON ?
Thanks!
Click to expand...
Click to collapse
Select these three options and go back again. Then again before. Debugging is now off again. Select it again and go back. Then again before and again activate. Now it remains.

ChinHon said:
Select these three options and go back again. Then again before. Debugging is now off again. Select it again and go back. Then again before and again activate. Now it remains.
Click to expand...
Click to collapse
Thanks , it's working even after a reboot.
Enviado desde mi PRA-LX1 mediante Tapatalk

ChinHon said:
Select these three options and go back again. Then again before. Debugging is now off again. Select it again and go back. Then again before and again activate. Now it remains.
Click to expand...
Click to collapse
Confirmed working! Thanks!

December 2019 Security patch with Locked Bootloader

Does holding volume down before executing the unlock command of bootloader bypass the wipe of my A2 or it will not factory reset when i Unlock my bootloader, Does it still works?
Sent from my Mi A2 using Tapatalk

Anyone who tried this please?

Never heard of such technique ?
For me BT unlock always wipes the phone of any brand.
Where did you get that info?

C4SCA said:
Never heard of such technique [emoji23]
For me BT unlock always wipes the phone of any brand.
Where did you get that info?
Click to expand...
Click to collapse
On my Xiaomi Mi A1 and it works just tried it now on A1. There is a thread also of the tutorial, I'm hoping on the same with A2 but i didn't see nay user who comments or a tutorial thread here :<
Sent from my Mi A2 using Tapatalk

paul222008 said:
...but i didn't see nay user who comments or a tutorial thread here :<
Click to expand...
Click to collapse
That is because is not possible to do.
With the Mi A2, when it boot you have a screen with a question, and if you are pushing a button, then you must push a button again to continue.

lept_2014 said:
That is because is not possible to do.
With the Mi A2, when it boot you have a screen with a question, and if you are pushing a button, then you must push a button again to continue.
Click to expand...
Click to collapse
I see i wonder why Xioami made it different from A1 when it has the same line up of A Series.
Sent from my Mi A2 using Tapatalk

paul222008 said:
I see i wonder why Xioami made it different from A1 when it has the same line up of A Series.
Click to expand...
Click to collapse
Unlocking the bootloader allows to flash anything.
Meaning you could exploit to remove security and then access data for example.
And its somewhat linked to the fact that a resetted phone will alwys ask for the last used google account on it (if it was not remove prior to the factory reset, in this case enforced by unlocking the bootloader).
Its basically a security measure!

Hi guys, Android 10 update is out now. Maybe this time this trick will work just like the Mi A1 ? Can anyone confirm it please.

paul222008 said:
Hi guys, Android 10 update is out now. Maybe this time this trick will work just like the Mi A1 ? Can anyone confirm it please.
Click to expand...
Click to collapse
No. I tried today. All it does is showing the bootloader unlock screen to select weather or not to unlock.

P30 Pro change firmware from C431 to C432?

Hello guys!
How i change firmware Huawei P30 Pro from C431 to C432? Exist any method?

Herodot21 said:
Hello guys!
How i change firmware Huawei P30 Pro from C431 to C432? Exist any method?
Click to expand...
Click to collapse
No, you can't. But may i ask why you want to get C431 to C432?
Sent from my LIO-L29 using Tapatalk

From what I read C431 is offered by operators as vodafone and that I would not get updates quickly.

Herodot21 said:
From what I read C431 is offered by operators as vodafone and that I would not get updates quickly.
Click to expand...
Click to collapse
As i've told you on PM, C431 is the cust offered in most of the EU countries. The carriers (Vodafone & Orange) are the ones that customise the firmware when you insert their SIM's, even if you bought an C431 cust device from a retailer (happened to some friends of mine on Orange, even if they've bought their phones from eMag).
Telekom & Digi don't have this practice, as per my knowledge.
OTA/HiSuite/eRecovery updates comes in branches depending on SN/IMEI. You can allways bipass Vodafone or Orange waiting time to update by removing the SIM from phone and check for updates using the 3 methods i've mentioned earlier ?
Stay inside, stay safe!
Sent from my VOG-L29 using XDA Labs

SilviuO said:
Stay inside, stay safe!
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Hi, Silviu.
Taking advantage of this topic. Can I change my firmware: VOG-L29 C605 to C432? Because in the version I'm using the updates never arrive, even with a new update available. The only way to update my p30 is via OTG.

alissonjp89 said:
Hi, Silviu.
Taking advantage of this topic. Can I change my firmware: VOG-L29 C605 to C432? Because in the version I'm using the updates never arrive, even with a new update available. The only way to update my p30 is via OTG.
Click to expand...
Click to collapse
No, don't flash the C432 firmware on your C605 device, it will get a you a nice brick . Flashing another cust on EMUI 10 results a softbricked device. So don't flash, stay on C605 and wait for new updates from Huawei or use the dload firmware from my thread about ROM. ?
Sent from my VOG-L29 using XDA Labs

SilviuO said:
You can allways bipass Vodafone or Orange waiting time to update by removing the SIam from phone and check for updates using the 3 methods i've mentioned earlier
Click to expand...
Click to collapse
Please could you show me these 3 methods previously mentioned? And what do you mean with removing the SLAM

terodeg said:
Please could you show me these 3 methods previously mentioned? And what do you mean with removing the SLAM
Click to expand...
Click to collapse
??, my mistake, it was without SIM, not SLAM, i corrected my post .
The 3 methods i've mentioned are:
1. OTA (from your phone, check for update using Wi-Fi)
2. HiSuitePC (download HiSuite, connect your phone to it and check for updates)
3. eRecovery update - It doesn't require a cable plugged in and using this method in order to update WON'T wipe your phone data, it's acting like an normal OTA. In order to acces eRecovery, Power OFF your device or Restart it. Press then simultaneously POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select eRecovery mode then Update and recover system then Download update and recover. Connect it to Wi-Fi and it should start the update. If it's still the version you're atm, you can hit Cancel and then Restart. If it's a newer version than the one installed, let it download and update. At the end, it will restart to system.
Let me know if you need further assistance
Sent from my VOG-L29 using XDA Labs

SilviuO said:
, my mistake, it was without SIM, not SLAM, i corrected my post .
The 3 methods i've mentioned are:
1. OTA (from your phone, check for update using Wi-Fi)
2. HiSuitePC (download HiSuite, connect your phone to it and check for updates)
3. eRecovery update - It doesn't require a cable plugged in and using this method in order to update WON'T wipe your phone data, it's acting like an normal OTA. In order to acces eRecovery, Power OFF your device or Restart it. Press then simultaneously POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select eRecovery mode then Update and recover system then Download update and recover. Connect it to Wi-Fi and it should start the update. If it's still the version you're atm, you can hit Cancel and then Restart. If it's a newer version than the one installed, let it download and update. At the end, it will restart to system.
Let me know if you need further assistance
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Slightly OT but no longer a P30 owner, got me the S20 Ultra, maybe will see you over those forums some time, what a device this is, cannot fault it yet ?

*Detection* said:
Slightly OT but no longer a P30 owner, got me the S20 Ultra, maybe will see you over those forums some time, what a device this is, cannot fault it yet
Click to expand...
Click to collapse
Guess it won't be long time, because after this covid quarantine gets over, i will go to office and get my replace work phone (i have to choose from OPPO Find X2 Pro, Mate XS ?, S20+ (not ultra, yet!) ), because my Mate 30 Pro got resseted ??? by itself and i can't seem to make GMS working again on it, regardless what i try .
? Enjoy your ? Sammy, m8.
Sent from my VOG-L29 using XDA Labs

SilviuO said:
Guess it won't be long time, because after this covid quarantine gets over, i will go to office and get my replace work phone (i have to choose from OPPO Find X2 Pro, Mate XS , S20+ (not ultra, yet!) ), because my Mate 30 Pro got resseted by itself and i can't seem to make GMS working again on it, regardless what i try .
Enjoy your ? Sammy, m8.
Sent from my VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Maybe get the S20 Ultra for personal phone? If not then I'd choose the s20+ for work phone, Sammy did well with the ultra, have seen some complaints as usual but I have none yet ?

*Detection* said:
Maybe get the S20 Ultra for personal phone? If not then I'd choose the s20+ for work phone, Sammy did well with the ultra, have seen some complaints as usual but I have none yet
Click to expand...
Click to collapse
I'll see it when this Covid quarantine ends, i will do some tests when i'll get an S20 Ultra unit on my hands, for 1 week tests. I've seen that it got few updates which improved battery life, camera performance and some other firmware optimisations.
I'll let you know when i'll get on Sammy's threads ?
Sent from my HUAWEI VOG-L29 using XDA Labs

SilviuO said:
I'll see it when this Covid quarantine ends, i will do some tests when i'll get an S20 Ultra unit on my hands, for 1 week tests. I've seen that it got few updates which improved battery life, camera performance and some other firmware optimisations.
I'll let you know when i'll get on Sammy's threads
Sent from my HUAWEI VOG-L29 using XDA Labs
Click to expand...
Click to collapse
Look forward to it mate, stock firmware it was very hot, updated to latest and all is well
Back on topic anyway ?

can i flash mate 20 x c431 with c432