Related
Hi,
I've wrongly flush a Hongkong ROM (JP3) to my M110s.
The JP3 ROM includes: boot.bin cache.rfs dbdata.rfs factoryfs.rfs param.lfs Sbl.bin zImage modem.bin
Now I've flush back the correct cache.rfs dbdata.rfs factoryfs.rfs param.lfs zImage modem.bin as well as the PIT file and I can get the phone booted with DH23 (The Froyo M110S ROM). However, I can't get the phone work with earlier ROMs.
So what I'm thinking is, my boot.bin and Sbl.bin are still in the wrong status (override by the JP3 ROM) and cannot boot ROM earlier than DH23.
My question is, is there any way I can flush the correct M110S boot.bin and Spl.bin or any other way to get my phone back to normal (can work with ROMs earlier than DH23)?
Many thanks
I don't keep track of the Korea ROMs, but maybe alovell83 can tell you which one you can use to Flash the phone again to correct all the files.
You can always try the Kies registry hack to let Kies do all the work to flash the phoen back to the stock ROM you were using before
Thanks, AllGamer.
Let me try Kies. BTW, what Kies registry hack is for? I did some search, and find it's about changing ProductCode ..
AllGamer said:
I don't keep track of the Korea ROMs, but maybe alovell83 can tell you which one you can use to Flash the phone again to correct all the files.
You can always try the Kies registry hack to let Kies do all the work to flash the phoen back to the stock ROM you were using before
Click to expand...
Click to collapse
layesuen said:
Thanks, AllGamer.
Let me try Kies. BTW, what Kies registry hack is for? I did some search, and find it's about changing ProductCode ..
Click to expand...
Click to collapse
yes you change it to the version of the product you want, then set the firmware to an older version, and then you'll be able to flash it
www.matpclub.com/board/index.html?id=dev2&asort=recent&page=4&no=62
BTW, does anyone know if the url in the title is the right bml1 and bml5 for m110s?
layesuen said:
Hi,
I've wrongly flush a Hongkong ROM (JP3) to my M110s.
The JP3 ROM includes: boot.bin cache.rfs dbdata.rfs factoryfs.rfs param.lfs Sbl.bin zImage modem.bin
Now I've flush back the correct cache.rfs dbdata.rfs factoryfs.rfs param.lfs zImage modem.bin as well as the PIT file and I can get the phone booted with DH23 (The Froyo M110S ROM). However, I can't get the phone work with earlier ROMs.
So what I'm thinking is, my boot.bin and Sbl.bin are still in the wrong status (override by the JP3 ROM) and cannot boot ROM earlier than DH23.
My question is, is there any way I can flush the correct M110S boot.bin and Spl.bin or any other way to get my phone back to normal (can work with ROMs earlier than DH23)?
Many thanks
Click to expand...
Click to collapse
Where did you get the correct files from to flash them back to the shw-m110s? I have flashed an improper rom on my device and cannot figure out how to fix it back to the original rom.
Hi!
Anyone have boot.bin and sbl.bin for M110s yet?
I want to repair my phone by jtag, but i need this files for it. I downloaded flashes for M110s, but boot files not included
WBR
qwerthj
worked for me
try this
http://www.megaupload.com/?d=FSYE7C1N
qwerthj said:
Hi!
Anyone have boot.bin and sbl.bin for M110s yet?
I want to repair my phone by jtag, but i need this files for it. I downloaded flashes for M110s, but boot files not included
WBR
qwerthj
Click to expand...
Click to collapse
Hi!
Have u found jtag on MB m110s?
if u can please post here pic.
THX.
unlimitedRU said:
Hi!
Have u found jtag on MB m110s?
if u can please post here pic.
THX.
Click to expand...
Click to collapse
still waiting too
For ANYONE who has ANY kind of problems with the South Korean version of the Samsung Galaxy S, namely Anycall SHW-m110s you can revert to the ORIGINAL factory settings (internal card format, rom, boot etc.) using the files from the archive from megaupload, which was posted above by Alin_GSM.
I REPEAT the link to use is on megaupload followed by /?d=FSYE7C1N
All credits for this go to him. I fixed my m110s, the 16gb version, using those files after i have used a korean .pit file to re-partition my internal memory and the telephone couldn't mount the internal memory.
Cheers !!
I tried to root my m110s and now can't boot, only have a GT-1000 screen holding. OOPS!!!
So I am getting the repair file mentioned in this thread. God help me what do i do with it. I can boot into recovery mode, have odin, just click start and boot up? Sorry I know I'm an idiot.
hello
Can anyone post a link with m110s roms? thanks
Hello, im new to the world of galaxy note phones and need to flash N7000JPKJ4_OJPKJ3_XSG_Android_2.3.5 firmware through ODIN. I extracted the file and found just one tar file. Where do i select this file and do i need to select re-partition and pit file?
Thank you.
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
unleashed12 said:
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
Click to expand...
Click to collapse
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
andrew21 said:
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
Click to expand...
Click to collapse
yes.
10chars.
DO NOT CHECK RE-PARTITION
just select .tar file through PDA on Odin and let it do it's thing!
i have a problem cz i did PIT with u1_02_20110310_emmc_EXT4.pit
and now my phone is stuck but i still can enter download modem and odin read the phone.i have N7000JPKK2
Please help me!!
Hello! I am really tensed about my phone. its hard bricked.
I tried flashing the wrong firmwares and roms in it.
my phone is galaxy s2 i9100, thats what the back part says
I cant go to the recovery mode but only the download mode where I tried flashing some other roms but every time it says FAIL!
i am very tensed of what to do, my phone gets stuck every time of factory something when sometimes it hangs while flashing.
please help me anyone!!:crying::crying::crying::crying::crying::crying:
Hi,
my SGS is now hard bricked. I was trying to update firmware using odin, but I checked Re-partition box. Now I can't put my phone into download mode.
Please help me, what can I do?
Hi
I was on RocketRom V5 and wanted to go back to GB
so i tried to install a stock GB rom using PC odin but it failed in the middle of the proccess
now the phone can only go to download mode
and if I tried to boot it or go to recovery mode it says "Frimware upgrade encountered an issue. please select recovery mode in kies & try again"
now every time i try to install a stock rom using PC odin it fails
and the useless kies is giving me an error like massage in chinese
so if there is a way to install any rom without using kies it will very helpful
max-thamer said:
Hi
I was on RocketRom V5 and wanted to go back to GB
so i tried to install a stock GB rom using PC odin but it failed in the middle of the proccess
now the phone can only go to download mode
and if I tried to boot it or go to recovery mode it says "Frimware upgrade encountered an issue. please select recovery mode in kies & try again"
now every time i try to install a stock rom using PC odin it fails
and the useless kies is giving me an error like massage in chinese
so if there is a way to install any rom without using kies it will very helpful
Click to expand...
Click to collapse
I too am facing the same situation. Hope someone comes up with a solution.
have you made a wipe while on ICS? was your phone booting normaly when you flashed it with PC ODIN?
try version 1.87 ,and if that doen't work then search for version 3 of ODIN
also do note that you should open task manager and shutdown any kies processes (usually two of them) ,kies will stop an ODIN flash ,so make sure to kill it first
i was really excited when i saw a reply i thought it was an answer
if you found a solution please post it here
max-thamer said:
i was really excited when i saw a reply i thought it was an answer
if you found a solution please post it here
Click to expand...
Click to collapse
it is an answer !!
kill KIES and you should have a smooth flashing ,unless you have corrupted your emmc by wiping on ICS of course
MR.change said:
have you made a wipe while on ICS? was your phone booting normaly when you flashed it with PC ODIN?
try version 1.87 ,and if that doen't work then search for version 3 of ODIN
also do note that you should open task manager and shutdown any kies processes (usually two of them) ,kies will stop an ODIN flash ,so make sure to kill it first
Click to expand...
Click to collapse
my phone was ok on rocketrom and it was booting ok until i tried to install a rom using PC odin
and i uninstalled kies completly to avoid any problems
i even tried odin 3 and still no luck
i will try odin 1.87 and reply back
MR.change said:
it is an answer !!
kill KIES and you should have a smooth flashing ,unless you have corrupted your emmc by wiping on ICS of course
Click to expand...
Click to collapse
i was referring to the post above you
as i said i uninstalled kies completely
and i was on speedmod kernel which its developer says he did something to the kernel which should prevent the emmc bug
is there a way to know for sure that i corrupted the emmc or not ?
when you uninstalled kies, drivers may have been affected. reinstall drivers and try again. if you can, use another pc.
Zapped through server hops to XDA forums
just tried PC odin 1.87 and no diffrence
when you uninstalled kies, drivers may have been affected. reinstall drivers and try again. if you can, use another pc.
Zapped through server hops to XDA forums
Click to expand...
Click to collapse
i tried to install the drivers again but it said the drivers are already installed
i think i will try another pc
max-thamer said:
i was referring to the post above you
as i said i uninstalled kies completely
and i was on speedmod kernel which its developer says he did something to the kernel which should prevent the emmc bug
is there a way to know for sure that i corrupted the emmc or not ?
Click to expand...
Click to collapse
yes speedmod is safe ,you have nothing to worry about a brick.
now there could be many things that effect a flash:
1.bad cable
2.running as a standard account (select run as administrator)
3.wrong set of drivers ,to resolve download and install the latest KIES ,then kill it's processes.
4.wrong ODIN version (1.87 recommended)
5.as a last resort you shold flash a pit file (but that's risky)
anyway go to this thread and download ODIN from there and flash a GB ROM
http://forum.xda-developers.com/showthread.php?t=1424997
note that the drivers are included in this thread if you do not wish to install KIES again.
just follow this guide to the letter and you should be fine.
i changed the cable with a brand new cable that was in the original package of the phone
run as administrator
reinstalled the drivers from DR.ketan thread
tried odin 1.85 & 1.87 & the new odin 3 that has a slightly diffrent cyan UI
so im afraid i need to take the risk (BTW, what are the risks ?)
and flash a pit file
so can you please tell the right way to flash a PIT file so i can avoid the risks
your help are greatly appreciated
so anybody has a sulotion for this ?
i have been searching for a solution till now with no luck
max-thamer said:
so anybody has a sulotion for this ?
i have been searching for a solution till now with no luck
Click to expand...
Click to collapse
If you can have it covered under warranty somehow, then try to seek help from SS service. Otherwise, the method in the thread below could be useful.
http://forum.xda-developers.com/showthread.php?t=1661590&page=2
cheers,
i think i will take to samsung service
thank you guys for helping
max-thamer said:
i changed the cable with a brand new cable that was in the original package of the phone
run as administrator
reinstalled the drivers from DR.ketan thread
tried odin 1.85 & 1.87 & the new odin 3 that has a slightly diffrent cyan UI
so im afraid i need to take the risk (BTW, what are the risks ?)
and flash a pit file
so can you please tell the right way to flash a PIT file so i can avoid the risks
your help are greatly appreciated
Click to expand...
Click to collapse
the risks could involve a permanent brick (not even download mod) , can you post exactly what ODIN says?
post ODIN log please
EDIT: maybe by any chance that you flashed an ICS bootloader? if so then it maybe the cause for this ,you should try to flash the official LPf using ODIN ,and if it works and the phone boots then flash Speedmod ics kernel on top of it (before wiping or anything).
here I found this pit file on the internet ,you need to choose your model (16gb or 32 gb) ,it's most likely 16gb ,right?
remember this is a last resort ,so don't use it
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
EDIT :
sh*t , its a day off for samsung service
so ill live another day without my Gnote
this is ODIN log
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
what do you think ?? flashing a .pit file would solve anything
and should i load a pit and a PDA file in odin or only .pit file ??
max-thamer said:
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
Click to expand...
Click to collapse
if you still have warranty then by all means ,take it to the service center.
if you don't however then you should not give up this easily ,unless you have some cash lying around and you wish to give it to them.
either ways it's your call
good luck
max-thamer said:
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
EDIT :
sh*t , its a day off for samsung service
so ill live another day without my Gnote
this is ODIN log
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
what do you think ?? flashing a .pit file would solve anything
and should i load a pit and a PDA file in odin or only .pit file ??
Click to expand...
Click to collapse
weird ,it's failing to flash at factoryfs ,but it's not getting stuck during the operation.
I want you to try two things:
1.try to flash just a kernel ,try this http://forum.xda-developers.com/attachment.php?attachmentid=1068654&d=1337346991
this is the cm9 safe kernel ,if the flash with ODIN goes successful then you can boot into recovery and try to fire a nandroid restore from there
be careful flashing this with ODIN will give you a triangle and count ,so if you still have your warranty ,try to find and flash a stock kernel (which will not give you a triangle).
2.if none of the above works ,then select only the 16 GB pit file and flash it alone ,do not interrupt a pit file flash ,let it take as long as it wants . if you interrupt it then your phone is gone.
after that flash a full GB ROM with removing .pit and unticking repartition.
but I haven't done this before so if you want to go through with it I suggest you wait for someone with actual experience at this.
pit file
Here you go with 16 GB pit file
my galaxy s1 was bricked because i was trying to flash new usable frimware on the device,
i managed to un brick the device using this thread
[FULL GUIDE][UNBRICK][Root] Flash custom or stock ROMs or kernels [i9000][VIDEO]
Downgrade / change a custom ROM **** unbrick i9000 **** safely upgrade to a custom ROM **** exclusively-made videos If you find this thread useful, please click "thanks" button left beyond the post. DISCLAIMER: * I am not responsible for any...
forum.xda-developers.com
after device was okay i was trying again to flash android 6.0 on the device but it became bricked again
please help me fix my device
when im trying to fix bricked device again this is what is see (stuck like this)
<ID:0/029> Added!!
<ID:0/029> Odin v.3 engine (ID:29)..
<ID:0/029> File analysis..
<ID:0/029> SetupConnection..
<ID:0/029> Initialzation..
<ID:0/029> Set PIT file..
<ID:0/029> DO NOT TURN OFF TARGET!!
<ID:0/029> Get PIT for mapping..
<ID:0/029> Firmware update start..
<ID:0/029> factoryfs.rfs
Click to expand...
Click to collapse
edit: this was solved by replacing cable
i want to flash new android on the device now please help i dont want to brick it again
update:
i managed to install android 6.0 on my galaxy s1
using this guy video
thank you so much for all help
xda galaxy s1 community still alive and strong