I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
abispac said:
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
Click to expand...
Click to collapse
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
reefuge said:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
Click to expand...
Click to collapse
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
abispac said:
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
Click to expand...
Click to collapse
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
reefuge said:
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
Click to expand...
Click to collapse
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
abispac said:
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
Click to expand...
Click to collapse
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
reefuge said:
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
Click to expand...
Click to collapse
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Its going to take 5hrs to upload my backup
abispac said:
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Click to expand...
Click to collapse
ok ii'm thinking corrupted partitions too.... but if you are willing to try i've made a xt1063 easy installer script for you to try now normally i work on xt1068 and would test on my xt1068 - so have NO xt1063 its UNTESTED - use at own risk.....
just stock firmware / drivers / adb and mfastboot ( same as my xt1068 script) I see no reason it should not be compatible.
download to pc / unzip to folder / read instruction inside
https://mega.co.nz/#!Tok2DJ6T!ggMoQDfAzuA7cmQQjbGCbXolWZTnx_567vG02CiURVsxt1063 4.4.4 easy installer
I repeat it YOUR choice - if it works- great - if runs ok but rom remains same would suggest somethings corrupt - if it doesnt work at all back to square 1....
now im presuming your boot loader is unlocked, as will fail if locked or relocked - if you use and get error please report what they are, i would have done 5.0.2 but its only 50% downloaded with a 1 hr+ to still go, estimate 2 hrs from time of this post until I can post a link
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
abispac said:
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
Click to expand...
Click to collapse
just to let you know TWRP is now 2.5.8.0 fixes some bugs cause older versions know to break permissions in Lollipop!!
https://mega.co.nz/#!Dx03wTbD!3sDFubGomhegQqdoGzNb1RWnQwApzyaTlVq69uX1TqkFlash-able version (unzip to pc and flash from there) 2.5.8.0
https://mega.co.nz/#!n5cUQCAY!uf66vEcQlmtu6VZMLPxksEFMEioZUFpystzTP6kwU4I Temporary boot version (no flash) 2.5.8.0.
will look but cant promise
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
abispac said:
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
Click to expand...
Click to collapse
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
reefuge said:
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
Click to expand...
Click to collapse
Yeah i tried those erase commands many many times and same result, i cant replace recovery at all, only boot of it, so when i do " mfastbooot flash recovery twrprecovery.img " then try to boot of recovery, i boot into factory recovery not, twrp, but if i do, "mfasboot boot twrprecovery.img" i can see the recovery img gets flashed and the phone boots of twrp. Weird behavior. So when i notice that i tried to flash a rom with mfastboot, and at the end i gave the command mfasboot boot recovery.img (the original rom recovery) then it gets flashed, and phone reboots, but i gets stuck at the motorola logo. This phone its playing hard to get....
heres, my backup https://mega.co.nz/#!md0AwbLR!uWe9PLklIugOziPLV6O_plbU-Zz9EXbqRvUVpYxECk0 hope you can find something.
Im going to take this phone to a shop to see if they can fix it as i have lost all hope, thanks refuuge for your help.
Hi,
I want to change my phone's boot image.
Can anybody help me that how to do it?
I have lenovo a7000, running MIUI PRO.
Thank you.
find any boot logo u want and flash it via sp flash tools......make sure that the boot logo is for our phone..... what i mean is that it should be for our display.......1024x756 i think thats the one......i cm 12.1 beta 4 has watch dogs logo as boot screen try that.....cant give u boot logo as such without devs permission
hit thanks if helped
thanks, but actually i want to set my gallary image as boot image (boot logo). if there is something, by which i can create flashable zip or something like that, please suggest me.
Manu46 said:
thanks, but actually i want to set my gallary image as boot image (boot logo). if there is something, by which i can create flashable zip or something like that, please suggest me.
Click to expand...
Click to collapse
U will have to unpack the stock logo.img change the pic and repack it....Google how to do it...
I once tried that long ago...
U need logo.bin not boot.img....
I forgot the procedure but there is a tool just for extracting and repacking it again.... Try googling it...
I managed to make it.. But it was upside down...
try to use rom if supports boot logo personality
Arvind Balaji said:
I once tried that long ago...
U need logo.bin not boot.img....
I forgot the procedure but there is a tool just for extracting and repacking it again.... Try googling it...
I managed to make it.. But it was upside down...
Click to expand...
Click to collapse
Yea....sorry for that......did not notice my mistake....... I know how to do it.....just don't have the time & the tools......
Hello, since i flash Nougat Roms on my k3 i allways loose the imei.
I try to fix it with campheleon APP, but after this i loose the sim. Engineer mode is not possible. Can anyone help to fix this.
Thanks a lot
Peter
Since you know how to flash Rom, the first thing you do before flashing is to back up (Nandroid) of your Rom with atleast TWRP (especially the system, boot, pro info, Nvram, Protect etc) before flashing it's always there in the warning ⚠
If you did that just restore the Nvram, proinfo, protect partitions
Else, you'll have to try flash stuck Rom with SP flash tool (using firmware upgrade option under download)
Chamelophon could give you a temporary fix thou
Thank you sir.. but i want to get clarified about another thing..
Bolumstar said:
Since you know how to flash Rom, the first thing you do before flashing is to back up (Nandroid) of your Rom with atleast TWRP (especially the system, boot, pro info, Nvram, Protect etc) before flashing it's always there in the warning
If you did that just restore the Nvram, proinfo, protect partitions
Else, you'll have to try flash stuck Rom with SP flash tool (using firmware upgrade option under download)
Chamelophon could give you a temporary fix thou
Click to expand...
Click to collapse
I have lost imeis after flashing nogaut roms and then flashed stock rom using chamelophon app i restored imeis.. Now if i take a backup of nvram system pro info etc and flash custom roms and restore nvram proinfo etc.. Then can i not loose imeis again? Does it help now? Thank you
sandeepr3884 said:
I have lost imeis after flashing nogaut roms and then flashed stock rom using chamelophon app i restored imeis.. Now if i take a backup of nvram system pro info etc and flash custom roms and restore nvram proinfo etc.. Then can i not loose imeis again? Does it help now? Thank you
Click to expand...
Click to collapse
If you flash stock Rom with SP flash tool and after that your imei is not restored without using Chamelophon app then you have a bigger problem. Chamelophon app modifications are cleared once there's a factory reset or system wipe - its not a permanent fix.
If after flashing your stock Rom with SP flash tool and your imei is not valid then you have to use imei write tool to write your imei (works only on mtk devices)
Then use TWRP recovery to backup your Nvram and restore it anytime you flash nougat Roms.
If after flashing stock Rom and your imei is back then take a TWRP recovery back up of Nvram and restore it after flashing nougat Roms.
Hope I helped
Bolumstar said:
If you flash stock Rom with SP flash tool and after that your imei is not restored without using Chamelophon app then you have a bigger problem. Chamelophon app modifications are cleared once there's a factory reset or system wipe - its not a permanent fix.
If after flashing your stock Rom with SP flash tool and your imei is not valid then you have to use imei write tool to write your imei (works only on mtk devices)
Then use TWRP recovery to backup your Nvram and restore it anytime you flash nougat Roms.
If after flashing stock Rom and your imei is back then take a TWRP recovery back up of Nvram and restore it after flashing nougat Roms.
Hope I helped
Click to expand...
Click to collapse
But actually the thing is.. I flashed nougat rom and lost imei then flashed stock using sp flash too.. Didnt restore imei.. Then i used chamelephon.. It helped.. Now i am using "Stock rom imei working with help of chamelephon".. So now can i backup nvram etc and flash nougat rom? So that i dont loose my imei this time? I tried with sn write too but it says some meta default error.. So all i have is only chamelephon imei.. So Please help...
sandeepr3884 said:
But actually the thing is.. I flashed nougat rom and lost imei then flashed stock using sp flash too.. Didnt restore imei.. Then i used chamelephon.. It helped.. Now i am using "Stock rom imei working with help of chamelephon".. So now can i backup nvram etc and flash nougat rom? So that i dont loose my imei this time? I tried with sn write too but it says some meta default error.. So all i have is only chamelephon imei.. So Please help...
Click to expand...
Click to collapse
If you have any old TWRP backups then restoring from it could be the best option.
This is the reason we warn ⚠ make full backups before flashing anything.
The default stored information on some hidden partition has been altered or corrupted and there may not be much you can do than keep using Chamelophon (if it works well on Nougat)
You can try and download the latest RR 5.8.2 it has mtk engineering mode and very stable you can use to write imei too. But am not sure it stays permanently
Bolumstar said:
If you have any old TWRP backups then restoring from it could be the best option.
This is the reason we warn make full backups before flashing anything.
The default stored information on some hidden partition has been altered or corrupted and there may not be much you can do than keep using Chamelophon (if it works well on Nougat)
You can try and download the latest RR 5.8.2 it has mtk engineering mode and very stable you can use to write imei too. But am not sure it stays permanently
Click to expand...
Click to collapse
No sir.. Chamelophon is not working on nougat roms i think not maybe on custom roms actually i flashed the latest 5.8.2 rr beta 2 uploaded on 10/03/2017.. Mtk engineering mode is not working on rr 5.8.2 beta 2.. I dont have any previous backups now i am using stock with the help of chamelephon imei.. If i take a backup now with chamelphon restored imei.. Does it gonna help in nougat roms to restore imeis?
sandeepr3884 said:
No sir.. Chamelophon is not working on nougat roms i think not maybe on custom roms actually i flashed the latest 5.8.2 rr beta 2 uploaded on 10/03/2017.. Mtk engineering mode is not working on rr 5.8.2 beta 2.. I dont have any previous backups now i am using stock with the help of chamelephon imei.. If i take a backup now with chamelphon restored imei.. Does it gonna help in nougat roms to restore imeis?
Click to expand...
Click to collapse
There is mtk engineering mode in the RR 5.8.2 that am using but it doesn't have option to change imei.
Am sorry there may not be another way for now since there's no xposed Framework for nougat yet.
You may have to stick with Marshmallow for now.
Or buy another motherboard from Aliexpress
Bolumstar said:
There is mtk engineering mode in the RR 5.8.2 that am using but it doesn't have option to change imei.
Am sorry there may not be another way for now since there's no xposed Framework for nougat yet.
You may have to stick with Marshmallow for now.
Or buy another motherboard from Aliexpress
Click to expand...
Click to collapse
Thank you bro? for your valuable information. Finally i want to know if i flash marhsmellow custom custom rom to my device can it be possible not to loose imeis again? I mean do i loose my imeis after flashing marshmallow custom rom? Since i am using imeis with help of chamlephon app.. If i loose it again can i restore using any mobile app? On which rom mtk engineering mode is available? And is it possible to change imeis using mtk mode on my deive? Or is there any other solution for this problem? Please let me know.. Thank you
pba066 said:
Hello, since i flash Nougat Roms on my k3 i allways loose the imei.
I try to fix it with campheleon APP, but after this i loose the sim. Engineer mode is not possible. Can anyone help to fix this.
Thanks a lot
Peter
Click to expand...
Click to collapse
Download IMEI_MAKER.zip (to create a new IMEI file) then unzip the content of the folder (imei.exe) to a folder on your desktop
In command prompt, navigate to the imei.exe containing folder you just created on your desktop
NOTE
Code:
cd\ then Enter returns to root directory
cd.. then Enter goes up one directory
cd foldername then Enter navigates to a folder called foldername
A faster method is to open the imei.exe containing folder > Hold down Shift > Right-click on an empty space > Select "Open Command Window here"
When you're inside the imei folder in command prompt, type
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
eg
Code:
imei.exe 123456789111111 123456789111124
Press Enter
If both IMEIs you gave are of the correct format, a file named MP0B_001_NEW will be created. Rename it MP0B_001.
Now you can send it to the sd of your phone
Install ROM toolbox lite then go to root explorer
In root explorer, delete the existing MP0B_001 file (located @ device/data/nvram/md/NVRAM/NVD_IMEI) and replace with the one you just created
Long press the new MP0B_001, go to permissions and tick all 9 boxes at the top then select ok (don't tick special pernissions)
Restart your phone
Your SIMs should be detected, IMEI reflect and Baseband version change from unknown to what it should be.
Note that getting this done might not be this direct due to different scenarios but replacing the MP0B_001 file is the ultimate goal in order to fix the issue.
Download link:
[NOT ALLOWED FOR ME]
SEARCH ON GOOGLE !
Hola Devs,
Currently I own Mi 5 in which I used to have Lineage os 14.1. But after the recent update i.e Lineage-14.1-20180110 nightly gemini, all of the sensors got pissed of except fingerprint sensor.
Initially I thought it may a hardware problem, but after brown through the root files, I got to find that all my sensor related files are missing from the Persist partition. So I downloaded the fastboot rom the official website and flashed through Mi Flash Tool in both Fastboot and EDL mode. still the problem remains as it is. While flashing, the tools is not even considering the Persist.img file. BTW I even tried to flash through Fastboot cmd, and it is showing error as the partition is write protected, neither the partition is erasing nor is flashing
Can I get any kind of solution??
Or can you provide me the persist flash bat file formatting or flashing the persist Img file.
Or can you guys provide me sensor related files to be placed wherever it is necessary..
BTW wifi Bluetooth nfc fpc all are working except Gyro sensor and Proximity sensor. And also it is not at all showing in Engg mode too(*#*#6484#*#*)
thank in advance
It's the persist partition problem.
You could refer to this thread
http://www.miui.com/thread-6788019-1-1.html
Unfortunately, the language is Chinese. Please use the translator if you can't read it. Of course, you could ask me how to do it too.
Sorry, I am a Chinese, so I may have made some mistakes in grammar. Hope you could understand what I am saying ?
Ask someone to backup him persist with zcx recovery, then restore yours with it and problem solved.
I had exactly the same problem as you and that fixed mines.
Greetings
hellow everyone, sorry for my english. but i need your help !
yesterday i was trying to repair IMEI of my pixel 4xl. unlocked bootloader working on android 12.1
after restoring QCN of another same model. nothing happens so i reset ESP using TWRP commands found somewhere in forum ..
after that im unable to restore my modem.img or modemst1, st2. fsg. i have backup of all files but unable to flash using fastboot mode. it gives me error.
Remote user not allower to flash MODEM. etc..
the situation is. my wifi is not working and imei is crupted or blank.
i have tried android flash tool online and upgraded to Android 13 Developer 2.
but same results
i restored QCN using QFIL. but. nothing happens
is there another way to flash modem files? or any easy commands. thanku
Go to halabtech they've solution but paid.
rohailadnan said:
hellow everyone, sorry for my english. but i need your help !
yesterday i was trying to repair IMEI of my pixel 4xl. unlocked bootloader working on android 12.1
after restoring QCN of another same model. nothing happens so i reset ESP using TWRP commands found somewhere in forum ..
after that im unable to restore my modem.img or modemst1, st2. fsg. i have backup of all files but unable to flash using fastboot mode. it gives me error.
Remote user not allower to flash MODEM. etc..
the situation is. my wifi is not working and imei is crupted or blank.
i have tried android flash tool online and upgraded to Android 13 Developer 2.
but same results
i restored QCN using QFIL. but. nothing happens
is there another way to flash modem files? or any easy commands. thanku
Click to expand...
Click to collapse
can you pls share your efs backup or full backup i have no sim no service issue i will be grateful i corrupted the partitions so pls Here is that you can restore efs https://forum.xda-developers.com/t/tool-backup-restore-efs-imei-for-all-sgsiii.1901098/ and restore modems from qfil