Hi everyone. I was trying to fix my charging cable and had my wires all connected itself and to phone usb port. Now my phone always thinks it is being charged and does not charge with default charger at all. Also it discharges much more quickly. I have a charger with an indicator and the light is shining while plugged to phone, which means that the phone does not close the circuit and always have electricity flowing in and out. I manage to charge it only with more powerful charger as it charges more quickly than the phone discharges.
Anyway, has anyone had a similar issue or knows how to deal with it? Would repair cost a fortune and is it even worth to repair the phone? Could this be just an usb port or some kind of fuse problem - or maybe a motherboard is cooked?
Thanks
Related
Well I'm at about 2% battery life, and it will not charge. I'm using my computer to charge it. Charging it from the wall hasnt worked for me for a while, not sure why.
Anyway I was wondering what it can be? I doubt my battery's dead or something is wrong with the phone... I'm sorry if this question's been answered, but I couldnt find an answer on google.
If USB charging works, but not charging with the AC adapter then the adapter is either bad, or plugged into a bad power outlet.
Nope it's neither of those because Ive tried two working AC ountlets and two warking cables. However, that's not my problem, my phone died and I can't charge it :-/
Ya so the phone died. It didn't look like it was going to charge on the USB, really weird. Anyone ever have there phone refusing to charge? While it was alive I tried to run activesync; that didn't work. So what should I do?
Btw, I've had the phone for a couple months now and I haven't had any big problems. I don't think it can be my phone failing, worst case just the battery. I've had something similar before but it fixed itself, doesn't look like thats happeneing now.
Battery
Maybe charging from the computer wasn't such a good idea. I recommend changing the battery and the charger and always be a nice boy and charge from the outlet ::- ).
I had the same thing happen to me - the connector at the bottom was broken. I had to do a return to factory. I looked (using a magnifying class) at the bottom of the phone and clearly see a crack in the connector.
It doesn't charge from the outlet.... I kinda just explained that lol
jrd said:
I had the same thing happen to me - the connector at the bottom was broken. I had to do a return to factory. I looked (using a magnifying class) at the bottom of the phone and clearly see a crack in the connector.
Click to expand...
Click to collapse
Hmm my connector does look a little bent. However it would of had to be like this before, and it was charging until I let my battery get to 5% :-/
I had a similar problem with my Kaiser a couple of weeks ago - it started to crawl and a soft reset took over 15 minutes to come back up to a working state, after which the battery wouldn't charge. It definitely wasn't the charger at fault as that still works on my TyTN. Phone was about 3 months old, so called Vodafone UK who seemed to think it was software related and so provided next day swap out. Old battery works in the new handset so never did get to find out if it was hardware or software that caused it to die.
Here's what probabally happened... you meant to stick you stylus in the reset hole and accidently put it in the usb hole... thus bending your charging port. I did it and when I plugged it into my car it would actually discharge the battery.. but when I plugged it into an outlet it just wouldn't charge.. if I were you I'd go see if it charges in a car
I appear to have a similar issue when charging from PC usb, and have identified that if I put pressure up or down on the charger it will charge the kaiser. But if plug in the charger without applying directional force it will not charge. Currently i have a small weight resting on the mini USB chargin input.
So obviously something up with the connector. But I haven't jammed anything up the usb port to my knowledge. Are these ports really that flimsy?
Tilt owners: If charge mechanism breaks, is ATT cool?
Oh no, now I can't charge or sync my Tilt.
My power is slowly running out.
What do I do? This is covered by manufacturers warranty in a year, is
ATT going to take my Tilt back and give me a new one?
I need my phone to be working and working well.
Thoughts?
axonn said:
Maybe charging from the computer wasn't such a good idea. I recommend changing the battery and the charger and always be a nice boy and charge from the outlet ::- ).
Click to expand...
Click to collapse
Charging from the computer should be better than the wall, given that the USB ports on the computer have a 5.5v output, while wall chargers have 5v.
I'm creating a new thread because I think my charging issue is unique...
My Kaiser will show an orange light and indicate that it's charging when:
1. Powered On and plugged in to: USB, AC power Adapter, or Car charger
but it will not take a charge and the orange light goes out after about two minutes.
2. Powered Off and plugged into: USB, AS Power, or car charger
but the orange light remains on and it never charges (tried 5 hours)
The device also does not sync, I don't see anything physcially wrong with the USB port, but it was damaged by water several weeks ago, it hasn't worked properly since.
I've been getting by with an external battery charger that I purhcased from Ebay.
Does anyway have any ideas? I've reflashed the device since then as well and there is no change in how it reacts to charging..
Hi echofive
I have the same problem with my Kaiser but at least it charges with just one of my 5 AC power adapters. Not in my Car charger and not on a USB connection.
Maybe it has something to do with the small USB pins on the Kaiser which are not properly aligned. You can try to bend them.
Good luck.
Hello, I was having this same issue and (long story short) I believe that it is the small USB pins on the phone.
Here is what I found (sorry knda long post). I have two ATT TILT phones. My Original Tilt phone got soaked in water but I was able to almost salvage the phone by soaking it in Denatured alcohol and letting it dry. This 'wet' Tilt has all functions but cannot read sim cards. It does however charge perfectly.
The replacement Tilt I have works like a charm but refuses to charge. Regardless of USB charging, off the wall charger or car charger, the orange light comes on, says it is charging but in 2 minutes the light goes out. The phone is still listed as charging but I know it is not charging because the battery level continues to drain. The phone does sync to my PC and I am able to transfer files to/from my new TILT via a USB cable. Just cannot charge the device.
I have 3 batteries. 2 stock batteries and the large 3200mah battery. All three batteries will not charge on my new TILT. I tried charging it via USB connected to my Computer, Car cigarette lighter, Car inverter charger, official TILT charger from CINGULAR ATT. Completely unable to charge the device.
If I attempt to charge the batteries (all three of them) on my old 'wet' TILT the batteries charge regardless of what method I use. It will charge via USB connected to the PC, USB connected to wall charger, official ATT TILT charger, or car charger. No issues. So I know the chargers, cables and batteries do charge on a TILT. Both TILTs are official ATT TILT devices. Two of the batteries are stock and 1 of the batteries is a SEIDO 3200mah.
Sometimes I get lucky and the new TILT phone does charge. In these cases I charged the phone using the Wall charger and the battery was over 50% capacity.
Now I know the new Tilt USB port is working because it syncs to my PC just doesnt charge after 2 minutes (light goes out) and battery continues to drain (watched and tested this after 3 hours of observation). I ended up ordering one of those TILT USB connectors which have a 3.5mm headphone jack and USB port.
This device: http://www.amazon.com/i-Trek-Stereo...8&s=musical-instruments&qid=1230877732&sr=8-4
What is weird is that I can now charge my NEW TILT using the USB port on this connector with this connector attached to my new TILT. If I attempt to charge the TILT using the onboard USB port, it stops after 2 minutes and the light goes out.
Personally, i think it has something to do with the pins. Hope this helps someone.
Jinkage said:
Regardless of USB charging, off the wall charger or car charger, the orange light comes on, says it is charging but in 2 minutes the light goes out. The phone is still listed as charging but I know it is not charging because the battery level continues to drain.
Click to expand...
Click to collapse
Been there, had that problem and the solution was even simpler and didn't involve the charging/USB port at all. Get a cotton bud (US folks call them Q-Tips) and spray some contact cleaner on it (not anywhere near the phone) and use it to carefully clean both the gold strips/terminals on the batteries along with the gold spring terminals on the phone. Although they may look clean, invisible grime film can make the connection fail and cause this problem. This is also a good tip to follow with ordinary household battery rechargers and NiMH cells. I haven't had this problem since but still carry out a terminal clean every few months to be on the safe side.
My phone wouldn't charge anymore. Searching through threads I found a magnificent magnified picture of the mini-USB port and the way the right part of the port was bent down a little. It was exactly like that with my phone, I used the pointing stick to tilt it up a little (be careful it may break of the pins, and that would lead you far from home!), which fixed! Haven't had the issue since!
Regards,
Nika.
Hi.
Have you still the link with the picture . I have the same problem an i am afraid , that i can kill my Kaiser
Regards
Dariely
Nope, sorry...
I had a similar issue with my Kaiser. It would charge with a USB cable and an ac adapter but not in the car. It used to but stopped. I took a dental tool and lifted the two little legs inside on the bottom of the mini usb port so they would contact the charger again and all is well.
nikagl said:
My phone wouldn't charge anymore. Searching through threads I found a magnificent magnified picture of the mini-USB port and the way the right part of the port was bent down a little. It was exactly like that with my phone, I used the pointing stick to tilt it up a little (be careful it may break of the pins, and that would lead you far from home!), which fixed! Haven't had the issue since!
Regards,
Nika.
Click to expand...
Click to collapse
YEAH!
Great Tip!
had the same issue as you a long time!
tilt up the pins: no more problem!
THANKS A LOT !
I straightened up the last pin. I was beginning to think it was my AC Charger...I plugged it in my Ashtray charger and it charged without a problem. I will see if this takes a charge. I didnt use any denatured alcohol, I just took the compressed air canisters used for computers and cleared out the usb port....
we wait now
Hi,
I have a kaiser with either a mainboard/usb fault. HTC wanted £250 to fix, so a repair is out of the question.
If I charge the battery on another Kaiser and stick it in my faulty one then my faulty one works fine for a few hours (it discharges more rapidly than it should - I assume due to the fault, but works for probably 4 hours) there is no way of charging via the faulty phone mini usb connector (it lights up amber but doesn't charge, nor does the USB connection hook onto the computer).
Luckily I had hardspl on the phone from new and can easily update via the uSD card if any need.
My questions are these: How can I hard wire my kaiser to a power supply so that I can leave it on in my car at all times? (it doesn't need to be moved)
The battery is 4.2v, can I hook a 5v supply onto the 2 outer pins?
What are the other 2 pins for?
Do I need to connect the 4 copper pads in the battery compartment together?
Thanks for any help that you guys can give!
http://www.mikechannon.net/page1.html
check out the service manual
Hi,
Thanks for that, I scoured through the service manual but I couldn't find anything about the voltages on the battery compartment terminals and therefore how to hotwire power straight into them, I don't know much about this and didn't want to screw it up worse than it already is by sticking 5volts onto them. Looking at the markings on the battery power to the outer 2 terminals would do it but i'm sure there's more to it than that.
Dan.
Many angles to this.
Battery is 3.7 volts. You'd want to supply that. But there is a battery charging circuit inside the phone. How that will effect things? I don't know.
There is a circuit in the battery that gives you battery % I believe. Unless you feel like reverse engineering that, you're in a tight spot.
I'd say save your cash, and buy a new phone. this probably won't end well.
on second thought. If you're already willing to hardwire contacts, why not just hardwire 5V to the USB pins?
Keep your battery in there and you'll have 5V on the usb port keeping everything happy
Hmmmn, you might be on to something with that, the problem with the phone is that it doesn't charge when hooked up. The power light glows amber but it actually makes the phone DISCHARGE faster than when not connected. Once the battery gets completely drained all I get is a RED led.
When I sent it back to HTC they said water damage right away. I know for a fact that it hadn't been wet in more than 2 months (it did get wet but only a few raindrops, just enough I guess to wet a detector strip) from when this fault occurred so perhaps it's not a mainboard fault and is in fact the USB connector failure another thread is referring to....Hmmmm.
Gonna give it a bit of thought and then either get the soldering iron out or just bang it on ebay for spares. Should think the screen assembly would be worth a fair bit!
Perhaps I misunderstood.
If you're getting the magical amber LED while the USB is plugged in, I'll say you have a good connection. I wouldn't screw with any soldering. It does sound like you have a short somewhere.
I only had my phone drain faster than it could charge when I setup a bittorrent client on my phone. Got warm!
Inspecting the board for damage might be the best choice. I've seen a motherboard on a laptop that went out with visible water damage. I scraped off an area with "ick" on it that was shorting out two contacts.
If you can't solve it that way, I'd try to disable 3G/bluetooth/wifi and see how low you can get your power consumption.
Hello guys,
So today, I finally found out why my phone would not charge from an AC plug. It turns out that the actual plug (not the wire) is broken because my phone can still charge over the PC. However, I don't want to connect my phone to my PC because Ive already fried a USB port doing so. On the plus side, I have about a gazillion chargers (apple, LG, Samsung etc) lying around the house but I am reading that the charger needs to be a specific voltage or you could potentially fry your battery and stuff like that.
So would anyone recommend to me the correct voltage for charging the phone?
Edit: I found the voltage to be 5V. Can anyone confirm?
Last Edit: Ahahahahaha, seems like the cable is broken. LOL Mega faceplam.
Hello during vacation my phone fell into the sea. I did all I could, dry it and put it into the rise for 2 days. Everything works perfectly but charging. When phone is On it shows charging (no fast, just regular) but nothing happens. When phone is off it charges slowly but it charges.
What do you think if change of the connector plate will solve the problem?
Did you try other cable?
Yes, I have tried cable, quick charger, slow charger. There is no difference. I have ordered small plate with the charging connector to change and to see if it will resolve issue