I just got a stock galaxy tab sch-i800. I want to root and install a custom recovery and I can't even start that project because of the secure connection error I keep getting. Im on 2.3.5 and can't download any apps because of it also. Please someone help.
Related
Hi All,
I recently bought a i9000 galaxy s from Turkey, phone doesn't have the market app by default. I want to make the minimum changes to my phone so that I can access the android market. I looked through the previous posts but I am lost. Hopefully someone can point to the right direction.
Here is the version info:
pda i9000jvjh1
phone i9000jxjg2
csc i9000trcji1
Here is what I attempted so far:
- I can access recovery/download modes.
- Rooted the phone. (http://forum.xda-developers.com/showthread.php?t=739304)
- Running system/app/Vending.apk gives a parse error.
- Installed the market-enabler app
- Found a vending.apk on another website and copied it to the sd-card, I was able to install it but when I try to download an app it says: "The application Market (process com.android.vending) has stopped unexpectedly, please try again." Also when I look at the downloads tap of the market I see that things are stuck at "starting download..".
What should I do next? There is an update to Froyo available on Kies for my device, but I learnt that update doesn't have the market app either.
P.S.: I am on a Mac and have limited access to windows.
Thanks a lot.
HGT
Is this the correct section of the forum for this kind of question or should I repost somewhere else? Thanks.
Why dont you flash a whole new firmware, it comes included, you will also be stock and have no unnecessary modifications
~Webstar1
I have been working on this issue for the past couple days but couldn't resolve it. It seems like flashing to a new firmware is the way to go. I wondering if flashing would void any warranties? Also how do I decide which firmware to use? I'd appreciate if someone could suggest a firmware. Thanks a lot.
HGT
Hey samsunghgt,
Have you found a solution for the market issue? Did you flash a new firmware? If so, whiich one did you flash ? And is it working well?
I just performed a fresh installation of the MIUI RC5 on my i9000 and Have a few problems.
1. My network provider is not being recognized at all. (Even after a couple of restarts)
2. My IMEI is not being displayed. (Even after deleting the efs folder using Root Explorer.)
So please respond immediately as I wish to continue using this ROM.
Thanks in advance
you have to restore the efs backup that you should of made before the installation.
that will restore the IMEI and give you network coverage.
if you cant do that, re-flash the ROM, and if it still doesnt work, you will have to flash back to froyo with pit and repartition and start the whole process again.
Thx a lot dude. Trying it right now. Hope it works *fingers crossed* http://media.xda-developers.com/images/icons/icon11.gif
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Galnet MIUI v4.0
WIFI Sleep policy does not seem to work. It is set to sleep when screen is turn off, but it never turn off. This is draining up the phone battery. Any one any idea?
chrisanddarla said:
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Click to expand...
Click to collapse
So you have the Samsung Infuse? Because this is the Galaxy S forums and I don't think Miui is even available on the Infuse so no wonder it isn't working(and the way you installed it isn't the correct procedure anyway). You can probably install a fresh official rom for your phone some how through odin but I'm not familiar with the Infuse. Best to go to the Infuse forums and ask. Hope this helps
galnet v4
hi!
i have problems with my MMS. i cant send my MMS messeage..only recieve..
anybody help ?
I have a rooted GT-P6210 that was working perfectly fine and last night I updated Busy Box Free from Google Play. Busy Box Free reported an error with the install and shortly after I noticed that my Wi-Fi would no longer connect. It just reports "Error" after trying to connect to Wi-Fi.
I tried re-rooting my device but that didn't fix my Wi-Fi issues. I researched everywhere I could think of to unroot my device but all the threads seem to refer to guides that I don't see and firmware links that no longer work. I managed to find a copy of Odin3-v3.04 but I still don't have instructions on how to do it nor do I have the firmware that I need.
I decided I would try going back to factory settings by powering off the device and booting into system recovery. I have done a wipe data/factory reset multiple times but Wi-Fi still doesn't work and I don't even know if that removed the root job I did.
When I plug my device into my PC and run Samsung Kies it reports that I have the latest firmware PDA:LA3 / CSC:LA3 (XAR)
So I am stuck and not sure what to do at this point. I have a pretty useless device that won't connect to Wi-Fi. I don't know if I wait around for ICS and install that if it will fix my problem.
Is there anyone that could help me restore my device to factory settings with actual guides, and provide working links to the firmware I would need?
Thanks for your help,
Bryson
You are in the wrong forum.
This is Galaxy Tab 7" not plus.
Might be better asking at the right place
http://forum.xda-developers.com/forumdisplay.php?f=1426
My gear watch is stuck on the (firmware upgrade encounter an issue please select recovery mode in kies and try again }
Here is what I did:
When trying to get the null rom running.
I got into this problem "IF TWRP IS NOT DISPLAYING CORRECTLY LIKE THE FOLLOWING:", as shown here:
http://forum.xda-developers.com/showthread.php?t=2537338
So I followed the first step:
DOWNLOAD THE STOCK V700XXUAMK7 IMAGE. (FLASH A FRESH INSTALL, DO NOT SKIP)
I accidentally flashed V700XXUCNE9, instead of V700XXUAMK7.
And then without setting up the watch on samsung gear and without getting into the debug mode, I tried to flash null again and it kept on stuck in the "NAND Write Start!!" message.
So I then tried to flash V700XXUAMK7 and it got stuck too after which I started getting
"firmware upgrade encounter an issue please select recovery mode in kies and try again"
I am unable to get into the download mode or the recovery mode. When I long press the power button, it throws me back to the "firmware upgrade encounter.." error.
Please please help. Is my watch recoverable ?
Update: I reflashed V700XXUCNE9 and its up and running now Looks like I was trying to downgrade it and thats where it was failing.
I want null rom on it and looks like it only can be put on top of V700XXUAMK7. How do I go back from V700XXUCNE9 to V700XXUAMK7 ? Can I flash null_03_TWRP2.7.tar on top of V700XXUCNE9 ?
You can, it does not care about any bootloader or stuff like that. It just repleaces a bunch of files on the system partition.
Lucky you, most of the times its a brick, i recommend you to use tizen the battery life on tizen is amazing
Thank you all. I was able to get back to Android and then flash the null ROM. I have the nova launcher running now but I am unable to use internet from my Android phone (LG Optimus G E970). It shows as paired but does not connect to the internet.
Also Play Store crashes when I try to add an account of use existing (says Google Account manager has stopped working).
How do I sync this thing with my phone, getinternet to work, make calls etc. ? Please help.
FYI: I have already checked for this from the FAQ page:
http://forum.xda-developers.com/show....php?t=2573449
INTERNET ACCESS
GO INTO "FULL SETTINGS -> BLUETOOTH -> SELECT YOUR PHONE SETTING ICON (ON THE RIGHT OF PHONE NAME) -> TICK INTERNET ACCESS".
ENSURE BLUETOOTH TETHERING IS ENABLED ON YOUR PHONE BEFORE HAND OBVIOUSLY.
But I am still unable to access internet.
did you get this working,
Did you add bluetooth tethering on your mobile
Flashing Null on V700XXUCNE9
@getmexda,
Did you come right with this eventually?
I have gone through a nearly identical process as you, accidentally flashing V700XXUCNE9, instead of V700XXUAMK7 and have been unable to get either TWRP or Null installed. You said, "I was able to get back to Android and then flash the null ROM". How did you do this? And did you resolve your issues with the internet access?
How to UnBrick Galaxy Gear !
( U CAN TRY THIS METHOD TO UNBRICK YOUR GG )
Hello friend .. previously im also got the same problem as u all when im trying to upgrade my GG1 but after a long search i found this link . What u need is just follow the instructions as given and the important things is DO NOT TRY TO SKIP ANYTHING !
How to UnBrick Galaxy Gear: h*t*t*p://youtube/fS4878klPAQ
( delete * from h t t p coz im not allowed to post link yet )
I hope this will help u coz my GG1 has been recover back .. not to original stock rom but it also upgrade my GG1 to TIZEN !!! :good:
And dont forget to thanks to that guys that send the video and me ( coz i need a credit to post another reply to whom that need a help ) and good luck to u all.
AND TO ADMIN : PLEASE DO NOT BANNED ME COZ IM JUST TRY TO HELP SOMEBODY THAT HAS THE SAME PROBLEM WITH ME .... PEACE !
I just got a stock galaxy tab sch-i800. I want to root and install a custom recovery and I can't even start that project because of the secure connection error I keep getting. Im on 2.3.5 and can't download any apps because of it also. Please someone help