Related
I have a problem that my phone pops up notifications - but they are blank.
The phone is a Kaiser/TyTnII ( Used to be Vodafone 1615 )
I am pretty sure that this phone has been flashed with one of the XDA ROMs as i have just done a hard reset and i still have touchFlo and a bunch of other non standard looking utilities on the phone.
The about box for TouchFlo says version 1.0 ( Build 1818.3719 ) which i am pretty sure having read all about the touchflo project for the Kaiser on the XDA developers is a version created here.
So now that i have given some background, back to the problem... pretty much everything on the phone seems to work ok. But the really annoying bug is this notification pop up.
eg. Set a calendar appointment for a few minutes in the future, set a reminder.
.... few minutes passes ... notification pops up
whole screen dims and at the bottom i get the soft buttons of "dismiss" and "menu"
No actual message is displayed on the screen.
Now i flip to landscape mode, and i can see the top left hand corner of a pop up message - the rest dissapears off the screen.
So, what have i done so far to help myself ?
1) searched these forums for somebody having the same problem/question X
2) tried some registry tweaks for specifying what message should pop up X
3) renaming the notification manager.dll X
4) looking at all the notification *.png screen images in the /windows/
folder and confirming that they are correctly set for the QVGA screen size. X
5) tried downloading the notification manager.cab for the rhodium - elsewhere on the XDA site. - would not install
6) hard reset the phone.
I dont actually want the touchflo as i prefer the spb mobile shell. What options do i have ?
Do i need to just apply the correct registry tweaks and all will be well ?
Do i download a new notification manager from somewhere that will fix this?
Do i have to re-flash the phone ? ( least attractive option to me )
Can i somehow uninstall the notification manager and go back to a windows
default version ?
thanks, you_were_lucky
Notification Manager - pop up window size ?
So some developments since my post yesterday, I tried some registry tweaks to change the font sizes.
I notice that if i tap the title bar ( next to the wifi icon) i get the notification manager screen up - this has all the correctly sized and formatted .png images and functions correctly.
It is the pop up that appears due to a calendar reminder or a wireless network found etc. that is all wrong
When i go into landscape i can see the edge of this and even click on the wireless network found radio buttons etc.
So i figure that maybe the pop up window sizes are all wrong due to some mad font size someplace. I went into the registry and tried changing font sizes down from 800 to 12 and this did indeed change the size of most fonts kicking arround the place. Unfortunately it did not influence the size of the pop up box.
Any ideas people ?
thanks YWL
1. Is there a way to alphabetically sort the "custom" display in the App Dock? (ie I want my custom apps to show alphabetically automatically without having to move them myself. (I know there is an alphabetical category, but that shows to many icons.
2. Is there a way to add panels to the left of the home screen? The last 3 HTC phones I had you could swipe to panels left of the home screen., on the One I can only seem to add/swipe to panels on the right.
3. Is the TV Remote App an HTC specific app (ie does it get updates?) I don't see it listed on the Google Playstore, so I'm wondering how HTC will update it . It can use a lot of work. I noticed its made by Peel, and they do my app on my Samsung Tablet, and I'm constantly getting updates/improvements for it.
Device Settings Menu Guide, Tips & Discussions
Part 4 - Advanced features, Device maintenance, Apps
If you're new to this series or want to see the index, please read the Introductory Post first.
Advanced features > S Pen
This section is exclusive to Note series so you should definitely give some time exploring it.
S Pen remote: Displays availability of the S Pen and its charging level. Configure Pen button actions for each compatible App and master control. I've tweaked it a little bit to make 'Scroll up/down' for Chrome and 'Single press' to 'Skip' while 'Double press' to 'Play/Pause' for Music. You can always tap 'Reset S Pen' in Menu in case you want to get back the default settings.
Unlock with S Pen remote: If enabled, you can unlock your phone with your S Pen in case it was taken out while the device was unlocked. In case you've enabled it, please keep an eye on your S Pen.
Screen off memo: Very useful when enabled. Here you can change the colour from the signature colour to classical white. I like the golden colour that comes with the Ocean Blue. However, this golden colour may seem weird to you when you open S Notes with the white background so you can force display Black text in S Note app itself that keeps the golden colour while writing.
Air view; Direct pen input; Pointer; Shortcuts: Very useful features. Review them. 'Learn about S Pen features' on the bottom or watch this 30-min video.
Floating icon: I don't like any over-the-screen icons so have disabled it. You can always open the Shortcuts menu by tapping the S Pen button while it's near the screen. I've also set 'Do nothing' 'when S Pen is removed'.
Alarm: Works when the screen is off since if it's on, you probably be using the remote feature.
Power saver: Although it's enabled for me, internet says it has negligible battery effects. If disabled, the device won't allow you to use another S Pen if your device's one is inside.
Sound; Vibration: Enabled since I don't like accidents. 'Oper Air command' in 'Removal' also helps in this case.
Advanced features
Accessories: Enable 'Fast wireless charging' here.
Smart stay: Too many ideal conditions required for it to work and may take a lot of battery power. Disabled.
Games: Explore 'Game Launcher' after enabling it from here. You can also hide your games from appearing in the menu while they are categorized by Game Launcher.
One-handed mode: A much-needed feature when you're OTG (on-the-go). I had changed the 'Gesture' to 'Button' after accidentally enabling this mode many times. On Pie, if you hide the navigation bar, you cannot check 'Button' mode anymore. OHM is also a shortcut in my Edge panel that is easily accessible from one hand.
Finger sensor gestures: Open/close notification panel or launch Samsung Pay using the fingerprint sensor. Make this a habit. Looks cool.
Device assistance app: Set to Google. Explore settings for the DAA - it was really cool to see Hindi (India) as an option there. Analyzing on-screen text/images is a very useful feature. Read the guide here and here on how to use Google Assistant like a pro.
Multi window: One of the best features and legacy of Samsung and for Note, it's a must-use one. By default, you can use SSV (Split screen view) by selecting it for the required app in recents. 'Use Recents button' is much faster. 'Pop-up view action' can interfere if you generally drag down the notification panel from near the corners (enabled for me).
Smart capture: Very useful screenshot features that you may need just after capturing one. Enabled.
Palm swipe to capture: I never bothered about it but with Note9, I started using it to save presses on my hardware buttons as well not needing to pick up the device in case I want a screenshot.
Direct call; Smart alert; Easy mute; Swipe to call or send messages: Tradional and useful Samsung features. All enabled.
Dual Messenger: You can use two seperate accounts for compatible apps (WhatsApp, Facebook) and restrict your contacts for the second ones. Suggested in case you have multiple accounts. For more James Bond feel, use 'Secure Folder'.
Panic mode: Can be helpful before you try show your Ninja Skills. However, I have accidently triggered it many times and since sending photos is enabled, it's kinda wierd! Still Enabled.
Direct Share: Helps you save an extra tap while sharing something. Ninja guide here.
Video Enhancer: Helps you flaunt the best screen more. In case you are not the natural-colours kind of, Enabled.
Touch sensitivity: In case you use screen protectors or live in Antarctica (gloves), Enabled. Disabled for me.
Device Care
Info: Add a home screen or edge panel shortcut to it as it's gonna be really useful. Tap 'Optimize Now' once in a while. It includes the virus scanning, memory cleaning, storage cleaning and battery optimization. Read below for more on these.
Battery:
Battery Usage: Do review this once in a while in order to identify culprits. 'Refresh' for real-time monitoring. In ideal case, all of your compatible apps should be set to 'Optimise battery usage'. In case any of them not working fine in the background and you need them to, disable the optimization for the app.
Power saving mode: Try all the modes (MID/MAX) once before you get into the Bear Grylls mode. MID will help you while you're travelling while MAX when you want to extend that last single digit juice. Do you want me share my settings?
App power monitor: When you tap 'Save Power', you manually make the apps 'Sleep'. They may wake themselves up again.
Unmonitored apps; Always sleeping apps: Select the apps you want always/never be able to run in the background.
Menu > Advanced Settings:
Notification settings: Get notified for 'unused apps' for days you specify in 'App power monitor' (disabled), 'Battery-draining apps' (enabled) and 'Unstable apps' (enabled).
App power monitor: Monitors apps to prevent excessive usage. You can 'Put unused apps to sleep' and specify the 'sleep delay' to let the feature automatically sleepify your apps (enabled, 1 day).
Fast cable/wireless charging: Enable or disable fast charging. You can disable 'Fast cable charging' in case you more often charge it overnight.
Performance Mode: Customize profiles for phone's performance (Screen resolution, Video Enhancer, UHQ upscaler, Game Launcher). You can then toggle these modes from the notification panel.
Storage: Love to see 512 GB here but only when it's the denominator. You can clean unnecessary data here by tapping 'Clean' or you can use apps like Files Go or SD Maid. User Data is also categorized so you can review and remove files of different types. 'Storage settings' summarizes device storage and you can tap the items to get to respective apps or apps settings. 'Get more space' helps you to delete Large, Unused, Duplicate and Unnecessary files.
Memory: Tap 'Clean Now' to clear your RAM. Likewise, for battery, these apps may appear here again.
Device Security: The virus scanning is powered by McAfee. Since it's disabled by default, enabling it never hurts.
Apps
All of your apps settings including Usage, Battery, Storage (Clear Data/Cache), Uninstalling and Force stopping, Notifications settings, Permissions, Defaults and Version/App details in store. I use 'Sort by size' with 'Show system apps' to occasionally review the apps taking the most storage. Change your 'Default apps', 'App permissions' and 'Special access' in the Menu. You can set 'set default apps automatically' as well. In 'Set as default', I've disabled 'Open links in app' even if they're not installed since I get annoyed when I have not installed an app because I want to browse on Chrome only (reduce usage of separate apps whenever possible). Read about 'Instant Apps' here (you can use these even without installing them). In case you mess up with the defaults and notifications, tap 'Reset app preferences'.
-- Reserved for FAQs --
Why are you posting this? ?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9
henklbr said:
Why are you posting this? ?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9
Click to expand...
Click to collapse
You have commented the same query on each of my parts. I have already answered you here where the similar discussion is already going on. Let's discuss there and keep this thread clean. Also, the 'why am I posting this' is already described in the Introductory Post.
Paras Lehana said:
You have commented the same query on each of my parts. I have already answered you here where the similar discussion is already going on. Let's discuss there and keep this thread clean. Also, the 'why am I posting this' is already described in the Introductory Post.
Click to expand...
Click to collapse
But this many different threads? Consider consolidating them?
dottat said:
But this many different threads? Consider consolidating them?
Click to expand...
Click to collapse
Talk about consolidation...... Have you counted how many battery life/issue threads exist?
Sent from my SM-N960U using XDA Labs
dottat said:
But this many different threads? Consider consolidating them?
Click to expand...
Click to collapse
Sir, 5 separate threads for almost everything you could discuss about the device!
I was also skeptical about this and even started in my mind with writing only one thread. But I wanted these kind of threads to be a contribution of the community not only the original post. The original post is only intended to be a reference post that will grow more with participation. And if this would be the case, I think it would add to the clutter if everyone is going to discuss variety of stuff in single thread. Anyways, need recommendation on this and I can consider consolidation as well.
2-25-23: Updated to version 1.6 Uninstall any previous version..
-cleaned up some obsolete code
-fixed potential infinite loop when update fails
-new issues related to processing incomplete weather data fixed
NST Weather Widget is a Tasker-generated app that runs in concert with Minimalistic Text to produce a true home screen widget displaying the current (forecast) weather in your locale as provided by OpenWeatherMap. The code for the weather is based on my NST Weather app with a few tweaks and without the status bar temperature/condition display. Because you build the widget yourself you can customize to suit yourself (within the parameters I have supplied).
Requirements
0. Root
1. If you previously installed NSTWeather (the status bar app), remove it completely, including the NSTWeather folder on the sdcard.
2. This is a Tasker-generated app. If you already have one of my other Tasker-generated apps or have previously installed GApps, you don't need the two Google maps library files included in the zip and can delete them. If you do need them, copy the two files into the locations shown below:
/system/etc/permissions/com.google.android.maps.xml
/system/framework/com.google.android.maps.jar
Set permissions for both files to rw-r--r-- and reboot. Without these files resident, the app will not install.
3. Copy the folder "NSTWeather" and its contents from the zip below to the root of your sdcard. This contains all the condition icons for the forecast panel and is where the weather.xml file from OWM will be stored.
4. Go to https://openweathermap.org/ and find the current weather for your locale. When this is displayed you will also see the "geocoordinates" (i.e., the latitude and longitude). Copy these two values.
Edit: I have three devices and on one of them the coordinates given by OWM always result in a town about a 100 miles up the coast. This is the same data used successfully by the other two devices! What finally worked for me was to go here: https://www.maps.ie/coordinates.html and enter my full home address. The coordinates were quite a bit different but worked perfectly.
5. Go to https://openweathermap.org/api and sign up for a free API (right there in the opening paragraph, click on the words "sign up"). You will eventually receive an email with the API.
6. Install Minimalistic Text (attached below). Installation and setup are tricky on the NST. There seem to be permission issues which are not entirely resolvable. What I ended up doing was installing a copy on a KitKat device and copying out two of the xml preferences files from the /data/data/de.devmil.minimalitext/shared_prefs. But this is not consistent and finally I decided to put together a flashable CWM zip of a working installation. That's what's below. Copy this onto your CWM sdcard, boot up CWM and install the zip. Reboot and your Minimalistic Text is good to go. No CWM card? Head over to here and make a card from either of the two sdcard versions. I have also modded the version of Minimalistic Text in the zip file so that widgets you create are visible in the opening screen of the app (as opposed to a black screen...).
7. Copy the Font folder (and its contents) from the zip below to your sdcard. The customized TrueType font of weather condition icons resides in this folder and you can add additional custom fonts for Minimalistic Text to access in the same folder.
Installation and Use
You MUST have Minimalistic Text installed before installing NST Weather Widget.
Install the app from the zip below either by side-loading or ADB. The initial user interface of the app is a Settings page. Open NST Weather and enter your latitude and longitude, as well as your API. Be especially careful with the API and make sure to include any negative signs with the geocoordinates.
Next, make your selection of the units you want displayed. Finally, to make the app fully functional you need to check both of the boxes in the lower section (you can disable the app temporarily by unchecking these). When you've made all the selections, tap on the bottom box to start a manual data retrieval. The Settings page will close and you should see WiFi come on for a bit. It will then turn off. If a successful connection was made with OWM and if you entered your information correctly, you will eventually receive a notification that the process is complete (first time only). How long will it take? About 3 minutes. There's an awful lot of stuff to be done. That's one reason for having the data update done at 3:30 am when you are hopefully snoozing. OWM finally added a time zone adjustment to their xml data file but I decided to leave my own in place because various municipalities have their own approach to daylight/standard time changes so your time zone will match the local clock setting of your device.
If for some reason the device fails to contact OWM the first time it will try a second time. If the second time fails, you will get a notification telling you that download failed, assuming there is nothing wrong with the values you entered. Go back to the Settings page and carefully check your API. That's where the most likely error will occur. Of course you should check your geocoordinates, too, just to be sure.
Once an initial weather forecast has been successfully retrieved (and the data is processed), tapping the app icon will display the 5-day forecast panel rather than the Settings page. However, you can access the Settings page from the little cog-wheel icon on the forecast panel.
If you have made a successful connection with OWM before and one day there is a notification saying download failed, you can just ignore it and hope for better luck the next day unless you absolutely must have an updated forecast. In that case, you can use the manual retrieval option from the Settings page. There is no need to re-enter the latitude, longitude and API each time you open the Settings page once they have been entered correctly. Also, if you decide to change the locale, you only need to enter the new latitude and longitude, not the API.
The 5-day forecast panel is updated daily even if a download fails (data is just shifted to the left and the names of the days are changed). You access the panel by tapping on the app icon or--better--by assigning the app to your widget (see below). If you run through the data entirely without any WiFi contact OR if the device has been off for awhile and the data is no longer current when it is turned back on, you will receive a notification that there is no more forecast data. A tap on the widget will initiate a manual data update.
The Widget
This is the hard part for the user (as opposed to the hard part for me, which was the app!). The version of Minimalistic Text for the NST has some issues but once you get past them it seems to behave OK. Unfortunately, it appears to have been intended for black screens, so fonts are default white, and the opening screen which ought to display your widget configurations just shows black rectangles, regardless of how you've set up font colors and backgrounds. And...a few menu options are "invisible" due to the colors used.
Edit: I have replaced the copy of the apk in the zip with a modded version in which the display of the widgets in the opening screen of the app has been fixed.
Not to worry. You'll get past it.
The app shares four variables with Minimalistic Text every three hours as well as updating one of the variables at both sunrise and sunset (within the nearest quarter hour). The variables are:
LOCATION (where OWM says you are)
CURRTEMP (the current forecast temperature)
CURRCOND (the current forecast general condition--as icon)
TCURRCOND (the current forecast specific condition--as text)
You can use as many or as few of these as you like, as well as static text, in any arrangement, to construct your widget.
What follows is not an exhaustive exploration of Minimalistic Text. There are people better qualified for that. This is what worked for me. Your mileage may vary.
1. Find a spot on your home screen and long press there to add a widget (or do whatever you do for the launcher you are using to add a widget)
2. Choose a Minimalistic Text option. The sample widget shown below (just the weather one, not the day-date) is a horizontal 2x1, just to give you an idea.
3. Minimalistic Text now opens to a Settings page. Give your widget a Name (Weather?).
4. Uncheck the "Show background". Ignore Shadow settings (at least for now).
5. You can ignore the Orientation settings for now. If there is some effect you are trying to achieve it may pay to return to them, but maybe not.
6. Under Predefined layout, select the last option: Custom (BTW, don't get distracted by the temperature stuff. The weather services of this old app are defunct.). We'll come back to Custom layout in a moment, but first...
7. You won't be able to see anything you are doing unless we do something about the font colors which are white by default. So under Text Style you will see three different options. For each one, you will want to set a font size (I like 20--you can override this later), a font color (probably black?), maybe the case, and an actual font to use.
Here's what I did:
Normal: font family=default, (not bold, not italic), size=20, case=normal, color=black
(use the "Back" status bar button to return for the other fonts)
Accented: font family=default, (bold, not italic), size=20, case=normal, color=black
(for some reason a sample of your Accented text does not appear...but it does work)
Non-accented: font family=weathericons.ttf, (not bold, not italic), size=20, case=normal, color=black
Note: you will only see the weathericons.ttf as a font option if you have done all the stuff described earlier.
8. Scroll on past a lot of Settings stuff to get to Tap behavior. You want the third option, Start another activity. When you check this box you see a new section to tap that will open a page which will eventually populate with activities. Find NST Weather and select it. This will make the forecast panel open when you tap on the widget.
9. Scroll back to Custom layout. DO NOT hit the back arrow!!!!! This will exit the app and you will lose everything you've done! Tapping on the box will open the "workspace" where you actually assemble your widget. By default there are three things already present there and it looks like mush below that because of the weather icon font. So, long-press on any of the default items until a trash can appears below. Then drag the item into the trash. Repeat for the other two. Now you have a clear workspace. There are three buttons at the right. The top button is for adding elements, the next one down adds a line, and the lowest one deletes a line.
10. Tap the topmost of the three buttons and you will see a bunch of options appear at the bottom of the workspace. Again, don't get distracted by the Weather options. They don't work any longer. You can explore later but for now what we want is "Misc". There are only two options on that tab, Locale variable and Static text. The first of these will be one of the four things I listed earlier. The second is just plain text that does not change (including something as simple as a space!).
OK, I am now going to build the widget shown in the image attached below. This may not be something you'd actually like to make, but I hope by me describing the process you'll get a feel for it. You can always go along with me now and then delete the whole thing afterwards, no harm-no foul.
11. Long-press on Locale variable until everything else fades away and then drag it up under "Custom layout". In the display space below you'll see [LOCTV]. That's for Locale Tasker Variable (I guess). Now tap on the grey Locale variable box and you'll see a mostly black section for text input. The first blank is for the name of the variable, like LOCATION. The drop-down is for the type of font face you want to use. I would select Normal. The last part is for overriding the font size from what you set before. I left that blank, so it's at 20. It is theoretically possible to dismiss this black area with the tiny "-" in the upper right corner, but it's devilishly difficult. I discovered by accident while working on this that another tap on the grey "Locale variable" box will clear the bottom box and save your work. (you can dismiss the keyboard with the status bar "Back" button)
12. Now tap the second of the right hand buttons to add a line. Tap the top button to add a new element and drag up another Locale variable, positioning it below the first one. Tap on the grey box. In the workspace, enter CURRCOND for the first field. Choose Non-accented text (this was where we assigned the icon font). I wanted this a bit larger so I checked the little box and entered 32 for the font size. Tap on the grey box to close all this and dismiss the keyboard as before.
13. Tap the top button to add a new element and drag a Static text box up to the second row. The only purpose of this box is to provide a space between the icon and the temperature! So tap on the grey box and the only thing you really need to do here is enter a space into the first field. Close things up as before.
14. Tap on the top button to add another element and drag another Locale variable box next to the Static text box. Tap on the grey box and enter CURRTEMP in the first field. The font would be Normal and I overrode the size to 32, as for the icon. Close things up as before.
15. Tap on the top button to add another element and drag another Static text box next to the Locale variable you just did. This is for the degrees symbol. Tap on the grey box and enter the degree symbol and either C or F in the first field. The font would be Normal and the size I made 32. Close things up as before.
16. Tap on the second button to add a final row. Now tap on the top button to add a new element and drag a final Locale variable box to sit below everything else. Tap on the grey box and enter TCURRCOND in the first field. I left the font at Normal and the size at default. Close up everything as before.
17. Use the status bar "Back" button to return to the Settings page. Scroll all the way to the end until you see Save/Restore. Tap "Save". Enter the name of the widget again (Weather) and hit "Save".
18. AND NOW THE MOST IMPORTANT STEP. Tap the "Menu" button on the status bar and you will see a menu appear at the bottom of the screen. Tap "OK". This is how you save your actual work, not just the settings. If you make changes, you always need to do this. This will exit the app and take you back to the home screen where--hopefully--you will see your widget!
19. If you wish to change/tweak the widget (as opposed to deleting it and starting over), tap on the MT icon and you will find yourself at the preferences entry page (all black...). You'll see your widget if you named and saved the preferences, but only as a black rectangle since your font color is most likely black and so is the page background (ugh...). Anyway, tap on the rectangle and you'll be back in the Settings area for that widget. Just remember, you need to save the preferences (near the end of the Settings menus--use the same name unless you are trying something out), and also you need to use the status bar "Menu" button to bring up the menu at the bottom of the page where you can tap on "OK" when you are done making changes.
Icons credit and information
I could not have done any of this without the weather icon font from Erik Flowers: https://erikflowers.github.io/weather-icons/. I did locate one other font but it had far fewer choices of glyphs. In the end I only actually used 13 of the glyphs for the weather condition icons. OWM has 18 general conditions (actually just nine doubled for day and night). After looking at the many choices offered in the font and the more detailed descriptions of the conditions from OWM, I decided to use day-neutral icons for situations in which the sky would be largely obscured. That means that the inaptly named "broken clouds" (51-84% cover), "shower rain", "rain", "thunderstorm" and "snow" show neither sun nor moon (and in fact are identical for day and night). There just seemed something odd about looking at driving rain and the sun peeking over clouds. Even in Coastal California we occasionally have such conditions as a storm is on the wane, but there just isn't enough fine gradation in the OWM condition icons so I had to make judgment calls. The specific text conditions, on the other hand, cover 54 situations and give some nuance to the general forecast.
In order to make the glyphs accessible to MT, I needed to partially remap the font, "moving" the 13 glyphs to standard keyboard characters rather than the glyph section which there is no way to access with the NST. I used the free version of Type Light 3.2 (https://www.cr8software.net/typelight.html) to do this.
The icons in the forecast panel are just images I created with a graphics program on my PC, using the remapped font.
So...if you don't like the condition icons you can, of course, not include them in your widget. If you want to change the icons in the forecast panel, you can replace the images in the NSTWeather folder. Just keep the size the same and make a transparent png. But if you want to replace the condition icons used in the widget, you will have to find another font somewhere and treat it as I did. You could also remap the font supplied if you prefer other choices of glyphs. That's quite a project and best left to individual questions.
That's a lot of work.
Wednesday at 11 AM has overflowed into two lines. Maybe there are extra spaces in the text?
I'd rather have the hours go left to right (even if there is less detail) and the days top to bottom.
Renate NST said:
That's a lot of work.
Wednesday at 11 AM has overflowed into two lines. Maybe there are extra spaces in the text?
I'd rather have the hours go left to right (even if there is less detail) and the days top to bottom.
Click to expand...
Click to collapse
Yes, indeed, a lot of work. Thanks for catching that layout issue on the panel. I was just fixing it as the email of your post came through. Layout is my least favorite part as Tasker on the NST is very cranky as you approach the screen size limit and it keeps shifting things every time you make a change. Then you need to go into the xml and find the coordinates and correct them...Then you transfer to another device on which App Factory will run and correct all the image paths...
Well, it's fixed
Amazing work. I hope you can get the error figured out. I'd love to add this to my office desktop nook.
deleted
4I am getting annoying notification for change settings at too of setting menu. Even if i tried to change setting as it mentions. Screenshot is attached with for clarification.
As i cannot attach screenshot xda app gives error of bad request.
if it's the "settings suggestions " you can get rid of it:
go to settings, apps, show all, dots menu top right show system, search for settings suggestions tap it, storage and cache, clear storage.
after 2-4 days it will show up again you redo the steps whenever you get too annoyed by it
just use sd maid or titanium and magisk to disable the application
laviniu_c said:
if it's the "settings suggestions " you can get rid of it:
go to settings, apps, show all, dots menu top right show system, search for settings suggestions tap it, storage and cache, clear storage.
after 2-4 days it will show up again you redo the steps whenever you get too annoyed by it
Click to expand...
Click to collapse
Worked this one but jus remove 2 notification then third come up. Its boring one. No solution for this one. And i cannot post screenshot of same too. On xda lab app.