Related
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Phk said:
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Click to expand...
Click to collapse
Hello,
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER+MicroUSB now you can install any stock ROM with fastboot commands and suitable *.img(boot.img, cust.img, system.img)
P.S
What OTA(number) arrive to you?
sokkoban said:
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER
Click to expand...
Click to collapse
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Phk said:
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Click to expand...
Click to collapse
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
sokkoban said:
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
Click to expand...
Click to collapse
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Phk said:
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Click to expand...
Click to collapse
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
sokkoban said:
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
Click to expand...
Click to collapse
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Phk said:
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Click to expand...
Click to collapse
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
sokkoban said:
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
Click to expand...
Click to collapse
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
How to root samsung galaxy y2 smg130h?
halim4 said:
How to root samsung galaxy y2 smg130h?
Click to expand...
Click to collapse
This was actually funny. :good:
Phk said:
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
Click to expand...
Click to collapse
OK
Try this. Use Huawei update extractor in forum xda have link to it. Open the UPDATE.APP and extract the following files: Recovery.img, Boot.img, Cust.img, System.img
Then use fastboot commands to flash B171 ROM
I wish you success!
Regards
sokoban
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Rocketmaster said:
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Click to expand...
Click to collapse
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
sokkoban said:
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
Click to expand...
Click to collapse
I flashed Stock and restarted and flashed B052. What do you mean with hard reset? I not comming in any menu. Only fastboot works.
Still bootloop
Which method use you to flash B052?
sokkoban said:
Which method use you to flash B052?
Click to expand...
Click to collapse
fastboot
Hm, this is very strange!
What device do you have? and which region use?
adb reboot recovery --- says: error: device '(null)' not found
if I try with serialnumber
adb -s W3D7XXXXXXXX reboot recovery ---- says error: device 'W3D7XXXXXXXX' not found
but ---- fastboot devices ----says at the same time: W3D7XXXXXXXX
---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ----------
ALE-L21 Germany
So B170 worked in the first place
Try this method and ROM
May be you must use google translator because tutorial is for Bulgarian people
http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
Hi, guys
By my stupidity my mate s marshmallow downgrade to lolipop.Now I am in CRR-UL00185B303(Andoid 5.1.1)
I try many things to go forward ..i failed many times .even stuck my phone also(thanks my old TWRP backup ).Aalo I lost my lost my security settings..iam not able to lock the phone by pin or finger print
Any body can give any suggestion..I have one marshmallow TWRP backup ..but that fails at the end of data backup..I dont know why.If i can go back to B114 also good ,,then i can update to B146 then update to marshmallow..
Lot of thanks in advance..
Try a factory reset for finger print
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
[/COLOR]
snickler said:
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
Click to expand...
Click to collapse
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
andromodgod said:
[/COLOR]
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
Click to expand...
Click to collapse
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
snickler said:
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
Click to expand...
Click to collapse
i can´t remember where i´ve found those information. i had bookmarked the bing-translated site some time ago but then deleted it since it ended in some nonsense discussion.
it was mostly about an "update" to MM, where people tried to change the phone localization from UL00 to L09 and update to B303 but failed and then used the MM TWRP Backups of some others.
Some ended in an bootloop and others had a corrupt system with FRP lock. I couldn´t tell if this happened because of corrupted backup files or because the users f****** up the recovery process.
Bing couldn´t translate everything to make sense.
They were lucky that they made a backup of the original system and so they were able to get back a fully funktional system.
i just wanted to warn you
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
wolfsstolz said:
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
Click to expand...
Click to collapse
That isnt a rollback - you'll find that when on B145 you cant activate security settings such as fingerprint ID. All it does it allow you to reinstall MM Beta Update...nothing more
brumgav said:
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
Click to expand...
Click to collapse
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Difference?
brumgav said:
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Click to expand...
Click to collapse
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
rickylambert said:
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
Click to expand...
Click to collapse
Only difference I could see was more options available in mobile data settings for your data plan
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
maurocasto said:
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
Click to expand...
Click to collapse
It's not yet possible...read the forum that you're posting in
I have an P9 EVA-l09 (5.0 EMUI) and I unlocked the bootloader and installed TWRP. I installed Ressurection Remix and it boot looped, after that I tried LineageOS and it keeps boot looping. I keep trying to return to stock with b136 firmware and b361 from the volume up + down menu and it keeps saying the wrong version. What am I doing wrong ?
Amity800 said:
I have an P9 EVA-l09 (5.0 EMUI) and I unlocked the bootloader and installed TWRP. I installed Ressurection Remix and it boot looped, after that I tried LineageOS and it keeps boot looping. I keep trying to return to stock with b136 firmware and b361 from the volume up + down menu and it keeps saying the wrong version. What am I doing wrong ?
Click to expand...
Click to collapse
First Go to TWRP & Do a factory reset than flash stock rom via 3Button method (dload)
Rakh1b said:
First Go to TWRP & Do a factory reset than flash stock rom via 3Button method (dload)
Click to expand...
Click to collapse
Already stated that I tried that method, it keep saying wrong version.
Amity800 said:
Already stated that I tried that method, it keep saying wrong version.
Click to expand...
Click to collapse
You flash wrong firmware
What firmware would work on my Huawei Eva l-09 on nougat? I tried b136 b361
Which country you from?
Croatia (central Europe) carrier is VIP
Rakh1b said:
Which country you from?
Click to expand...
Click to collapse
Croatia carrier is VIP EVA-L09 on Nougat
Hi guys.
I'm having problem with flashing nougat on my NEM-L21C432B132. I'm on 6.0 at the moment and I used both dload folder on sdcard method and Firmware Finder. Tried different versions and I keep getting warning saying "incompatibility with current version". How do I solve this ?
I have no root, stock recovery, unlocked bootloader. I thought it could be because of unlocked BL, but I cannot seem to lock it as "fastboot oem lock" doesn't work for me.
Serekzolty said:
Hi guys.
I'm having problem with flashing nougat on my NEM-L21C432B132. I'm on 6.0 at the moment and I used both dload folder on sdcard method and Firmware Finder. Tried different versions and I keep getting warning saying "incompatibility with current version". How do I solve this ?
I have no root, stock recovery, unlocked bootloader. I thought it could be because of unlocked BL, but I cannot seem to lock it as "fastboot oem lock" doesn't work for me.
Click to expand...
Click to collapse
You can download full firmware and flash it via dload method..
hassanjavaid8181 said:
You can download full firmware and flash it via dload method..
Click to expand...
Click to collapse
Like I said it doesn't work for me as I keep getting "incompatibility with current version" error. I tried using the dialpad code and going to "Software Update" and tried the 3 buttons (VOL UP, DOWN and POWER ON ) method and I get the same error. Can I just install TWRP and flash the .zips I get from extracting the update.app file ?
EDIT: Just tried TWRP. I get error 7 and the flashing procedure doesn't even start
Serekzolty said:
Like I said it doesn't work for me as I keep getting "incompatibility with current version" error. I tried using the dialpad code and going to "Software Update" and tried the 3 buttons (VOL UP, DOWN and POWER ON ) method and I get the same error. Can I just install TWRP and flash the .zips I get from extracting the update.app file ?
EDIT: Just tried TWRP. I get error 7 and the flashing procedure doesn't even start
Click to expand...
Click to collapse
You cannot flash it via twrp...
You are trying to flash OTA file or full firmware??
hassanjavaid8181 said:
You cannot flash it via twrp...
You are trying to flash OTA file or full firmware??
Click to expand...
Click to collapse
At the moment I have full firmware downloaded from Huawei Firmware Finder
The one called exactly : NEM-L21C432B352 FullOTA-MF . I believe that's the right one ? If not, which one is ?
Serekzolty said:
At the moment I have full firmware downloaded from Huawei Firmware Finder
The one called exactly : NEM-L21C432B352 FullOTA-MF . I believe that's the right one ? If not, which one is ?
Click to expand...
Click to collapse
Its not in update.app format right??
You can download full firmware from honor official site according to your model and build number..and then try to flash..
hassanjavaid8181 said:
Its not in update.app format right??
You can download full firmware from honor official site according to your model and build number..and then try to flash..
Click to expand...
Click to collapse
It is in .zip format but I extract it and put the update.app into dload folder. I will try to download from honor official site and let you guys now if there's any progress.
EDIT: just had a look on the website. There's no firmware for Honor 5C there. Can anyone point me how can I make nougat work and where do I download the right files ?
Serekzolty said:
It is in .zip format but I extract it and put the update.app into dload folder. I will try to download from honor official site and let you guys now if there's any progress.
Click to expand...
Click to collapse
Ok ...
hassanjavaid8181 said:
Ok ...
Click to expand...
Click to collapse
Just downloaded and got the same error. Please can anybody tell me do I have to be on locked bootloader to have OTA's or dload method updates working ?
The error is: Software install failed!
Serekzolty said:
Just downloaded and got the same error. Please can anybody tell me do I have to be on locked bootloader to have OTA's or dload method updates working ?
The error is: Software install failed!
Click to expand...
Click to collapse
You dont need to relock boot loader for ota..or upgrade..
All you have to be on stock recovery
hassanjavaid8181 said:
You dont need to relock boot loader for ota..or upgrade..
All you have to be on stock recovery
Click to expand...
Click to collapse
I am on stock recovery. I have no clue how to install nougat...can anyone help me somehow ?
Serekzolty said:
I am on stock recovery. I have no clue how to install nougat...can anyone help me somehow ?
Click to expand...
Click to collapse
Give me time till tomorrow. Will help you budyy.
shashank1320 said:
Give me time till tomorrow. Will help you budyy.
Click to expand...
Click to collapse
Hello,
I have extracted the update.app from the 6.0 version, flashed boot.img and recovery.img through fastboot, and my phone found the update even without using the Firmware Finder..strange but I have downloaded it and flashed without problems. My bootloader didn't even lock after flashing which happens from what I've read. Anyway I'm on the newest firmware ATM and also it's rooted. Maybe someone can explain that in case anyone had a similar problem in the future ?
Serekzolty said:
Hello,
I have extracted the update.app from the 6.0 version, flashed boot.img and recovery.img through fastboot, and my phone found the update even without using the Firmware Finder..strange but I have downloaded it and flashed without problems. My bootloader didn't even lock after flashing which happens from what I've read. Anyway I'm on the newest firmware ATM and also it's rooted. Maybe someone can explain that in case anyone had a similar problem in the future ?
Click to expand...
Click to collapse
What was the size of OTA? If it was 300-400 MB then it would not harm for bootloader or recovery
shashank1320 said:
What was the size of OTA? If it was 300-400 MB then it would not harm for bootloader or recovery
Click to expand...
Click to collapse
It was full size, the one above 1GB.
Serekzolty said:
It was full size, the one above 1GB.
Click to expand...
Click to collapse
OTA normally doesn't lock bootloader. Have seen this in my 5X.
Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
aalmeida1972 said:
Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
Click to expand...
Click to collapse
I'd suggest HurUpdater: https://forum.xda-developers.com/ho...h-official-firmware-recovery-t3769279/page111
OTAs do work with an unlocked bootloader, but not with root or custom kernels.
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Try my guide (Tutorial #2, Oreo to Oreo)
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
What also should work is flashing the system.img manually via fastboot.
For this extract the system.img from the correct firmware version with Huawei Update Extractor.
Connect your phone to your PC, boot into fastboot and flash with "fastboot flash system PATH\TO\SYSTEM.IMG".
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
Note for the next time: backup your system partition via TWRP before flashing the custom rom.
Also note that a factory reset is needed, without your phone won't boot, so backup your personal data before doing it.
aalmeida1972 said:
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Click to expand...
Click to collapse
Yes, it works on the P10. You can download the files with the firmware finder app. I'd recommend the newest oreo version for your customisation (e.g. B382 for C432).
But Jannomag's solution should work equally well.
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
aalmeida1972 said:
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
Click to expand...
Click to collapse
The fourth message in this thread
I am sorry, maybe i am just dumb but i can't find it
I followed the guide but know i am i an bootloop. I get the message "your device has failed verification and may not work properly"
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
aalmeida1972 said:
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
Click to expand...
Click to collapse
Possibly you renamed the wrong customisation file (i did it once for the 09 while I needed the 29).
Which one did you download? And did you flash manually or did you use my script?
Download my oeminfo, it's from VTR-L29C432 Version 8.0.0.380, while the version doesn't really matter.
Flash it via TWRP using "Install" and "Use Image". Flash it to oeminfo partition. Then do my update script again.
I followed the guide to do Oreo to Oreo - basically wanting to get from custom Rom (fRomFuture B370) back to stock, so I chose the same firmware version to extract. Flashed everything with the script and it went fine and it boots and works.. but
The resolution seems to be off, too low and the right side of the screen is unresponsive to touch (about 1cm )
EDIT- Rolled back to fRomFuture B370 for now - need to find a way to get back to stock, as want to move on to Openkirin ROM instead
HI, i have a vtr-l29 root, i want to unroot(version oreo), how do i do it? what do i need to flash?. thank you Alex