Does anyone know how to toggle quick charge in aosp extended oreo custom rom, please help me out
SAME HERE i also wan to know.
i think we have to use other kernals to get fast charge no toggles for QC
Related
Hi
Is it possible to do? In a ZTE Blade there is an option in Settings to do this.
Thanks
HaDeSz
Why you would want to do that And i dont think its possible...
maybe he wants to use the phone while doing some battery calibration or is afraid of too many loading cycles
Android supports it...
hard to monitor battery drain
This was a pretty big hit with the gnex and nexus s guys so I figure that I would extend it to the aries series phones:
This is for kernel devs only. The patch itself is useless to those who do not/can not compile their own kernel.
This patch allows one to force AC charging for any charger that is detected as USB (e.g. many car chargers) and pull the full current the charger can support. It also provides additional security when connecting to public charging stations because by forcing AC charging, USB/adb data transfers are disabled, protecting your data.
Fast charge can be toggled by issuing:
echo 1 > /sys/kernel/fast_charge/force_fast_charge
and off:
echo 0 > /sys/kernel/fast_charge/force_fast_charge
Some roms (AOKP) have also implemented toggles.
In addition I have created a toggle fast charge widget that may be used to toggle fast charge on and off right from your home screen:
https://play.google.com/store/apps/details?id=com.incredicontrol.fastchargewidget
For the widget (or any fast charge toggle) to work, you MUST be running a kernel that has this patch implemented.
As a good gesture to support a fellow dev, I ask that if you implement the patch into your kernel, please link to my widget as one means to toggle it. You are of course free to provide other ways to toggle it as well if you so desire.
Kernel devs, if you would like to test the widget yourself to confirm its working, and for convenience of testing, please contact me and I will provide you with a copy. You must show that you are a kernel dev though (i.e. link me to your kernel post so I can match your username).
Here you go. Good luck have fun:
http://www.incredikernel.com/wp-con...download.php?id=aries_force_fast_charge.patch
When the charger connected not showing rapidly chargin and showing slow charging only..can anyone confirm?
I have the same issue have you found a solution?
u using original charger or another? A2 supports 18w charger maximum for quick charge
same here, I use the charger that came with the phone.
you need to check in developer settings to enable it ....
KevMetal said:
you need to check in developer settings to enable it ....
Click to expand...
Click to collapse
can you specify what I am searching for? I didn't find anything related to charing.
Thank you in edvance
Pete Man said:
can you specify what I am searching for? I didn't find anything related to charing.
Thank you in edvance
Click to expand...
Click to collapse
2 things :
1. .........
Open the
??? sorry man i wrote a whole post that just disappeared :crying:
Basically :
• enable fast charge in battery settings
• enable charging as default charging method in dev settings
#lastly in my Xiaomi Jasmine android 1 there was an extra option that doesn't appear on all phones, models or even builds but that DOES exist which is a toggle to force allow or force disallow fast charge from dev settings ... similar how xiaomi offers the toggle to share wifi to wifi because this a feature removed from most android phones and so since amdroid 1 is more like base android , so maybe check for it
see the attached screenshots as reference...ive converted my jasmine to wayne so I can't show a screenshot
last but not least if there is no toggle and you have enabled it in battery settings and usb default connection is set to charge it can only be a software bug in which case file a bug report with xiaomi devs
KevMetal said:
Basically :
• enable fast charge in battery settings
• enable charging as default charging method in dev settings
#lastly in my Xiaomi Jasmine android 1 there was an extra option that doesn't appear on all phones, models or even builds but that DOES exist which is a toggle to force allow or force disallow fast charge from dev settings ... similar how xiaomi offers the toggle to share wifi to wifi because this a feature removed from most android phones and so since amdroid 1 is more like base android , so maybe check for it
see the attached screenshots as reference...ive converted my jasmine to wayne so I can't show a screenshot
last but not least if there is no toggle and you have enabled it in battery settings and usb default connection is set to charge it can only be a software bug in which case file a bug report with xiaomi devs
Click to expand...
Click to collapse
Thanks for your time man.
I don't know why, but neither of your two options work for me. Their is no toggle in the battery settings, or a option in the devs menu. I'm probably to dumb to find it, there is no way they would remove such a setting right?
hi everyone, i own a mi max 2 running Miui global 11.0.2 stable with android 7.1.1........i wanted to install pixel experience custom rom with android 9.....i downloaded the rom and flashed it using orange fox recovery,after installation everything was fine but when i tried to charge my phone the led indicator started blinking,and battery percentage was not going up....when i open settings it said not charging.........plus it doesnt recognize wifi networks and only connects to mobile hotspot.............can anyone give me the solution to this?:crying:
Did you swap charging cables? Aftermarket cables are rubbish. Is the charging port dirty, maybe defective? Try to look for obvious things. Change rom to miui. I have bad experiences with MM2 and non-miui roms.
This thread is to track which kernels (On Stock ROM or AOSP based) support Advanced Charge Controller the best and ones that prolong battery health by implementing Battery-idle Mode.
GitHub - VR-25/acc: Advanced Charging Controller
Advanced Charging Controller. Contribute to VR-25/acc development by creating an account on GitHub.
github.com
Please post your experience in prolonging the battery health and longevity of the internal stock 5020 mAh battery by:
Reducing battery wear and tear (due to fast-charging or charging to a full 100% every single time) by limiting charging to 60% or 80%
Depleting the limited 500 battery charge cycles on stock battery slower with Idle-mode
I have used without any problems ACC with the stock MIUI Rom, AOSPExtended and the last 10 days with the latest Lineage OS.
Very happy with the battery life In latest Lineage OS!
I'm using the ACC as a Magisk module and I commanding it via shell commands. Using it with 80 / 70 setup: setup charging at 80% start again at 70 and also I have setup the 50 / 5 cooldown option, for reducing battery temperature during a charge: the charge stops for 5 seconds after each 50 seconds fast / slow charge.
on eu rom and crdroid i can't use acc, always discharging every 5 second.
I'm using acc on acca app, when it doesn't work i tried using it as magisk modules, but still doesn't do the job.
shehaan27 said:
on eu rom and crdroid i can't use acc, always discharging every 5 second.
I'm using acc on acca app, when it doesn't work i tried using it as magisk modules, but still doesn't do the job.
Click to expand...
Click to collapse
I'm using acc in crdroid and it's working perfect.
But you have to take newest 2022 version and flash separately zip and app
thanks for info, i will try it
Hello,
I have Samsung Galaxy S10 (EU version) so with Exynos...
Is it possible to configure module (i.e. in AccA app) so that it really charges in "fast mode"?
I see that 15W (in fact 12-14W) is achievable only with original Samsung charger.
While using any other charger I mean 20W to 35W - max charging current is not more than 1,3 - 1,4A...
As far as I know there are Magisk modules that work, but with Qualcomm processor...
Is it possible to configure module so that on Exynos fast charging was really working?
In the picture there is configuration I made in the app but with no effect...
I configured using tips from ACC help.
Another question is Wireless charging. When I use 15W charger (I know real efficiency is 60-70%) but on average it charges 5-6W, whereas on the screen it shows "fast wireless charging" - is there another separate configuration of ACC for wireless mode?
Please advise, thanks!
tomiasx22 said:
Hello,
I have Samsung Galaxy S10 (EU version) so with Exynos...
Is it possible to configure module (i.e. in AccA app) so that it really charges in "fast mode"?
I see that 15W (in fact 12-14W) is achievable only with original Samsung charger.
While using any other charger I mean 20W to 35W - max charging current is not more than 1,3 - 1,4A...
As far as I know there are Magisk modules that work, but with Qualcomm processor...
Is it possible to configure module so that on Exynos fast charging was really working?
In the picture there is configuration I made in the app but with no effect...
I configured using tips from ACC help.
Another question is Wireless charging. When I use 15W charger (I know real efficiency is 60-70%) but on average it charges 5-6W, whereas on the screen it shows "fast wireless charging" - is there another separate configuration of ACC for wireless mode?
Please advise, thanks!
Click to expand...
Click to collapse
Maybe eqynox phones use a diffrente BMS chip. Probably is better to ask in the acc thread
Is there any kernel for RN10 PRO that supports battery idle mode?
Any chance this will work with s23u? Its really needed and very handy.
Donnerbesen said:
Any chance this will work with s23u? Its really needed and very handy.
Click to expand...
Click to collapse
There were reports that Samsung had implemented bypass charging natively in the S23 series...
amn1987 said:
There were reports that Samsung had implemented bypass charging natively in the S23 series...
Click to expand...
Click to collapse
Yes i know thanks. Im having it activated but it only work for games.
What i ment is to make it work with everything else too. Being able to run a phone over PD and bypass charging.. for example in a car all day or travelling by train.
Donnerbesen said:
Yes i know thanks. Im having it activated but it only work for games.
What i ment is to make it work with everything else too. Being able to run a phone over PD and bypass charging.. for example in a car all day or travelling by train.
Click to expand...
Click to collapse
No idea. Maybe someone would come up with a mod in the future. My devices even from years ago were never advertised to support bypass charging but with root it was possible to enable it in all of them. In some all it took was to limit the maximum battery charge level while in others limiting the maximum battery charging voltage was necessary.