Related
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
hollowground said:
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
Click to expand...
Click to collapse
you could try reflashing the original ROM
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
hollowground said:
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
Click to expand...
Click to collapse
If you're stuck at the calibration screen after a hard reset, how are you able to receive calls? Surely the reset hasn't completed?!?
Also, if you have reflashed to the original ROM, and thats now stuck also, then it has least got the correct ROM image on the device, thus allowing you to return it for a replacement.
Still a little confused about how you're able to use it at all though...
i honestly though it wierd myself. after flashing back to the original rom. at the calibration screen if i slide out the keyboard, press the talk button , close then reopen the keyboard, it lets me dial out using the number keys on the keyboard.
I can actually make out the home page behind the calibration screen as the screen reorientates itself.
edited Well I've no idea what just happened but the screen just stared working again out of the blue. My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
return it ..
kash04 said:
return it ..
Click to expand...
Click to collapse
I agree, sounds like a loose connection somewhere
Could be grit between the screen and frame
One of my friends had an XDA Orbit and he had this problem. It turned out it was a crumb or piece of grit wedged between the frame of the phone and the screen causing the screen to be permanently pressed at that point. He used some fine implement (maybe a pin - can't remember) to dig it out. If this was the problem with your phone that may explain why it suddenly started working viz the bit of grit became dislodged by itself.
Cheers,
Ashley
hollowground said:
i My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
Click to expand...
Click to collapse
Thats doggone lucky!! Just another reason to have a dog around...
My Nexus One Fell from a height of approx 1.5 meters.
> Now the charging LED is not glowing.
> When i turn on the Camera, the screen completely goes BLACK for about 1 min and then say NOT RESPONDING
> When i dial/call some number i can hear the voice , but the screen goes blank and i cannot hang up the call.
I wanted to Re-Install my OS, but i am not able to enter the Recovery.
I am using 4EXT Touch, the screen stays at the count of 0 and keeps looping there.
I even updated the newest Recovery using the 4EXT recovery APP. but No use.
These are the problems i so far found.
The mobile fell just a few mins back and i am very concerned :crying:
Please help
Seems like all the TOP portion things are not working.
The Proximity sensor is acting ODD.
Some times it does not Turn off the screen. SOme times it does not turn on the Screen.
Please reply.
How to Flash the ROM without entering the custom Recovery ?
I disassembled the mobile and checked if there are any loose connectors but didnt find any.
Please help me
"Fell from 1.5mts height"
AND IT WORKS?!?!?! No broken screen!?? Miracle!!
Best chance is to get a cracked screen/digitizer one on eBay, should cost around $20 or so, and replace the motherboard + camera.
dwegiel said:
"Fell from 1.5mts height"
AND IT WORKS?!?!?! No broken screen!?? Miracle!!
Best chance is to get a cracked screen/digitizer one on eBay, should cost around $20 or so, and replace the motherboard + camera.
Click to expand...
Click to collapse
The mobile was having the Silicon Cover so i think it absorbed some force, but some internal parts might have been effected
I dont have any problem with the TOUCH. It works well.
I found no loose connections in the connectors.
Non working things are :
1. Ear phone socket - Does not detect the headset
2. Camera - shows blank screen for a few secs and force closes
3. Proximity Sensor
4. Charging LED
so far i found these issues.
I cant enter the Custom Recovery (4EXT) too.
Please help me.
Should i buy the Mother Board ?
From ebay.in its a bit costly :
Link
HTML:
http://www.ebay.in/itm/USA-HTC-G7-Desire-Google-Nexus-One-Main-LCD-MotherBoard-Board-Flex-Cable-JTP-/290878178827?pt=IN_Mobile_Accessories&hash=item43b9b0c60b&_uhb=1#ht_1696wt_906
Is ther no other solution ?
firoz3321 said:
Should i buy the Mother Board ?
From ebay.in its a bit costly :
Link
HTML:
http://www.ebay.in/itm/USA-HTC-G7-Desire-Google-Nexus-One-Main-LCD-MotherBoard-Board-Flex-Cable-JTP-/290878178827?pt=IN_Mobile_Accessories&hash=item43b9b0c60b&_uhb=1#ht_1696wt_906
Is ther no other solution ?
Click to expand...
Click to collapse
Sounds like you've damaged quite a bit of it. It may not be the motherboard that's the only problem, and could mean also replacing screen, etc. Unless you're up to that it could be time to let the Nexus One go..
carmichaelalonso said:
Sounds like you've damaged quite a bit of it. It may not be the motherboard that's the only problem, and could mean also replacing screen, etc. Unless you're up to that it could be time to let the Nexus One go..
Click to expand...
Click to collapse
I cant think of letting it go
latest update : My mobile does not Switch ON , it passed away in the sleep ( My poor nexyy :angel: )
If some one can suggest any possible part to replace i would do that. I am not financially ready for another mobile soon.
Please help me.
It could be a variety of parts - any hardware experts here?
Sent from my Nexus 4 using xda app-developers app
carmichaelalonso said:
It could be a variety of parts - any hardware experts here?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
As of now it started to Switch ON. So it is better than not having it at all.
All the above noted issues are still not working
firoz3321 said:
As of now it started to Switch ON. So it is better than not having it at all.
All the above noted issues are still not working
Click to expand...
Click to collapse
I'm sure some items aren't absolutely necessary such as the charging led, but the earpiece and the proximity sensor could be more the problem. At least it boots - better that than nothing at all
carmichaelalonso said:
I'm sure some items aren't absolutely necessary such as the charging led, but the earpiece and the proximity sensor could be more the problem. At least it boots - better that than nothing at all
Click to expand...
Click to collapse
Yes i am really Glad it boots. I can use internet and SMS, but Ear Phone is big problem. Proximity Sensor is real Head Ache as i have to reboot after aeery call :crying:
firoz3321 said:
Yes i am really Glad it boots. I can use internet and SMS, but Ear Phone is big problem. Proximity Sensor is real Head Ache as i have to reboot after aeery call :crying:
Click to expand...
Click to collapse
Take a look on eBay - there are some ear pieces available (at least in the UK) and proximity sensors. Then if you follow a video which you will likely find you can manually replace these parts to see if they are the problem
Had the same problem; it can be the ribbon cable which is either loose, or completely disconnected. The bad news is that you'll have to disassemble pretty much the whole phone. We've actually damaged one the of the cables once while trying to do this, so if you try it, be very careful! There is a page online somewhere that tells you which cable it is exactly, just search the symptoms:
1. Camera doesn't work
2. Charger LED doesn't work
3. Proximity sensor always shows "near", as a result -the screen remains black after making a call
UPDATE:
Found the link with the picture of which cable it is:
code.go ogle.com/p/android/issues/detail?id=15291
It's a long page, so just scroll down
My Nexus one also has the same issues!
I know that it is coz of the flex cable. the other thing that doesn't work is the camera flash (when you try to use it as a flash light)
luckiely for me the ear phone does work! i am able to use the phone (except for the camera and flash light) for pretty much everything
as i always make/answer the calls using the ear phones, i dont have to worry about the proximity sensor not responding during the calls.
My suggestion would be to try and see if your ear phone is detected or not (may be play a song) and then use it to make some calls.
ant_vas said:
My Nexus one also has the same issues!
I know that it is coz of the flex cable. the other thing that doesn't work is the camera flash (when you try to use it as a flash light)
luckiely for me the ear phone does work! i am able to use the phone (except for the camera and flash light) for pretty much everything
as i always make/answer the calls using the ear phones, i dont have to worry about the proximity sensor not responding during the calls.
My suggestion would be to try and see if your ear phone is detected or not (may be play a song) and then use it to make some calls.
Click to expand...
Click to collapse
Unfortunately its not working. I thought i can atleast use for media listening/watching but its not detecting the earphone
there are some dedicated ROMs for usage as Media Players so i thought of it, but no use.
Only possibility will be to use the Bluetooth Headset. (I have Plantronics Backbeat 903+ but my ears pain a lot , doesnt fit will )
If some one can confirm that it is related to the FLEX cable then i can dare to buy it
ques
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
szihs said:
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
Click to expand...
Click to collapse
RE: Safe Mode...
I've had this before, all I did was to take my N1 completely apart, until the point where I couldn't see anything else to remove lol!
I then left it to air for the next 48 hours, reassembled and it works!
BUT !
I warn you, if you do this, you MUST make a note of where every piece on your phone goes or you'll regret it at the end!
szihs said:
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
Click to expand...
Click to collapse
My case was that the water entered the Trackball.
once it dried it was normal again.
DO NOT USE HAIR DRYER
thanks.
GlennBrownie said:
RE: Safe Mode...
I've had this before, all I did was to take my N1 completely apart, until the point where I couldn't see anything else to remove lol!
I then left it to air for the next 48 hours, reassembled and it works!
BUT !
I warn you, if you do this, you MUST make a note of where every piece on your phone goes or you'll regret it at the end!
Click to expand...
Click to collapse
firoz3321 said:
My case was that the water entered the Trackball.
once it dried it was normal again.
DO NOT USE HAIR DRYER
Click to expand...
Click to collapse
Yes, patience was the key. After some 24 hours it started working. (Trackball got drenched in water).
Thanks.
Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code
Hello guys, so I recently received an MI5 I ordered on Gearbest, in the 64gb international version (MIUI Global 8.2.2.0).
From day one, the touchscreen had the bad habit of going unresponsive randomly, meaning i have to struggle to swipe/click. Using hard keys (home, power) somehow fixes the issue for a few minutes but that's all. I unlocked the bootloader with Mi Unlock, and tried the latest build of LineageOS, and even flashed next the latest MIUI international developper build (29/06). On all of these 3 ROMs, the issue persists (and I went full wipe each time).
At the phone start, it is generally OK for a bunch of minutes, and then randomly becomes unresponsive.
I searched on the internet and did not find fixes, and i'm still unsure whether it's software or hardware related, even though I fear its the second option.
Would any of you have any more information on this subject?
To rule out any possible software issues, I'd flash the latest stable ROM.
Give that a shot and then see if the problem persists.
Well, the phone came new with the latest MIUI Global ROM (8.2.2.0), and since first start the problem was here. In the beginning I thought that it was just the phone lagging while setting up, but as time passed it was still there, no matter which ROM I flashed.
So, is there a potential software fix, or is this an hardware issue?
I am having the same issue, i hope its not hardware related :/
vlatko98 said:
I am having the same issue, i hope its not hardware related :/
Click to expand...
Click to collapse
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
damien2702 said:
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
Click to expand...
Click to collapse
Sadly thats the problem with Chinese phones,some of us that will face this problem's have no protection,we cant return the phone and get a new one,its better for us just to buy a new screen off aliexpress for 20euros than to wait 2 month's to ship it back and wait for it to be fixed and then returned and you pay the shipping costs and also the repair costs,but thats the risk we accept when we want the best bang for the buck.
Also poor quality control on the products to cut the costs is the real reason behind the problems we face
Had the same problem, it got fixed in the latest developer 7.6.29.
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
Hi, I indeed tried this solution, even thought it worked for a few hours.. But it came back soon enough
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
please can you make video this help a lot
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
mi5 unresponsive
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
still fixed at these days? now after screen replacement and an update, the touch becomes unresponsive
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
This is still working. Thx for help. Saved my phone after screen replacement.
Which Screws`?
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
hotdogg1979 said:
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
Click to expand...
Click to collapse
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Does the screws trick work on your phone? Plz tell me.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
Thank you, you saved my Gemini :good:
Doesn't work for me. I tried with all screws.
Sent from my MI 5 using Tapatalk
screw solution works !!
I tried this solution with Redmi 2 and its the exact same screw which is the problem ie the screw right in the middle of the phone.
i loosed it slightly and now no more screen freezes. :good:
Hi I'm attaching an image with the screws numbered.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
It would be nice if you post which numbers have you tried.
Richardyii said:
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
Click to expand...
Click to collapse
Did you mean that, when loosen it, the problem dissapears immediately without rebooting? Because I've tried it and it does not work immediately.
Mamihla said:
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Click to expand...
Click to collapse
I think your explaination is a little bit confusing. Did you mean that the thinner screw (the number 1 on the image attached) has to be swapped with the number 2? Or with the one with the warranty (number 5)?
Please if any other one found a combination that works, post it using the numbers of my attachment as reference. I have been tried several combinations amd no one seem to work.
Hey guys, I've got some weird problem with air triggers for a while now..
The right trigger can be activated somehow without touching it specifically, but even if I tough the back panel of the device.. It's a bit hard to explain, but you can see it well in here:
https://photos.app.goo.gl/PZZar4gMKZdYChqdA
Is it a defect in the device? Cause it didn't happen when u got it
Bought it from giztop back in October.
No one encountered this problem?
kobkobb said:
No one encountered this problem?
Click to expand...
Click to collapse
I do sometimes have higher than normal sensitivity with my right air trigger, but it has not been as bad as what you show in your video.
My theory would be that something is getting in the way of the contacts in your air trigger. Are you able to get some compressed air and lightly blow into your headphone jack and shake the phone a bit to see if it comes loose and fixes the issue?
I encountered the same problem as you, and later sent it to the original factory to say it was a screen problem, because I bought the Tencent version and it took nearly 170 usd to change the entire screen panel.
Personally think that it is a quality problem, and some users of the standard version have encountered similar situations. The warranty should be sent to the original factory without charge.
Yes. I am also having the same issue. Need to check with service center.
Workaround solution. User dual partition. If you use it for PUBG or Freefire put the left partition to the empty place and the right partition to the appropriate button. Also make left partition touch as 1 times. This fixed the problem of miss triggering the button. Hope it works for you.