Hi everyone, I need your help, I just bricked my CellPhone Huawei P10 Selfie.
BUILD NUMBER: BAC-L03C25B153
MODEL NUMBER: BAC-L03
PRODUCT ID: 26401324
SERIAL NUMBER: 6FCDU17929002623
I was trying to install oreo, I unlocked bootloader with any problem, but when I try to install TWRP it bricked.
When it try to boot it stop in the window that said Your device has been unlocked and can't be trusted to learn mor visit:.... and has a message your device is booting now... after a few minutes it automatic restart.
I can't use the bootloader, because I can't access to USB debuggin, eRecobery doesn't download, and when I try to install from SD Card with dload folder in root directory whith the os downloaded from hear "pro-teammt /firmware-database/ " using the vol+, vol- and on button, it start the process and when it has about 5% stop and return a message: software install failed.
What can I do?
Regards.
The P10 Selfie isn't a P10. This forum is just for the P10 VTR model.
You own a BAC which is completely different to the P10, and I really don't know why Huawei sells this in some regions as a P10 Selfie - it even doesn't look like a P10.
So, wrong forum for you - this is correct.
Jannomag said:
The P10 Selfie isn't a P10. This forum is just for the P10 VTR model.
You own a BAC which is completely different to the P10, and I really don't know why Huawei sells this in some regions as a P10 Selfie - it even doesn't look like a P10.
So, wrong forum for you - this is correct.
Click to expand...
Click to collapse
After see an image of Nova 2 plus I see they are very similar, I'm thinking if they are the same? Well I just unbricked the phone I will start a guide in the form you recommended.
Regards.
Related
Hi guys,
Good day to all. I just bought an Huawei P9 - EVA-L09C440B138 and i'm having some issues with updating to Nougat.
As far as i understood i need to change from C440 to C432 to get Nougat.
To be honest.... i simply could not find a solution for my problem and i need help from you guys with a guide how to do that.
Can someone give me a solution.
Thank you!
A shot in the dark here, but you can try downloading this ROM:
http://www.carbontesla.com/2016/11/download-huawei-p9-b182-marshmallow-update-europe/
You will also need an SD card (if you already have one, you can use that)
- Once you have done that, extract it anywhere.
- Connect your phone to your PC, allow access so you open your P9 storage from your PC
- Copy the "dload" folder over to your SD card (so you have a folder on your sd card called "dload" with UPDATE.app inside)
- Power off your phone
- Hold down both volume buttons and power button at the same time
It will either go into recovery mode where it installs the firmware EVA-L09C432B182, or fail doing that...
If it manages to install B182, you can just update your phone to android 7 normally from settings. If it fails you probably need a different ROM, but I dunno which.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
One of the top threads for the Huawei P9.
A bit research should have done this.
You will find most needed files in my signature.
I just managed to update from B138 to B142, but i couldn't go to B380.
Please keep in mine that mine is C440 not C432.
I used also Profy Finder and so on.... now i'm stuck to B142, any sugestions ?
Thanks
P9 - EVA-L09C440B142.
A friend of mine ask me to look at his phone. It's an Huawei P8 lite 2017, original software, not rooted, two months old. It used to work but now it only shows the start up screen with the Huawei logo, so I think it's bootlooping.
I tried to flash a new recovery with Minimal ADB Fastboot but it's not possible because I'm 'not authorized'.
I'm not sure how to fix this problem and where to start. I obviously can't go into the settings of the phone and switch on USB debugging, because it doesn't boot to Android. Is it possible to repair this phone?
thanks in advance
My problem is similar to this tread
https://forum.xda-developers.com/p8...ssion/p8-lite-2017-stuck-boot-screen-t3591451
so I will post in that one
good evening,
I have a huawei p9 EVA-L19C605B135 and I had a problem (for some bull**** I did while I was drowsy).
In an attempt to upgrade to nougat I joined this site (http://www.pregunteleamauro.com/cambiar-el-cust-del-p9-eva-l09/) to modify the CUST and only then realized that it was for L09. Sad, ridiculous but it's reality.
I did the process and now it shows to be a L09C605B135. I tried to install another rom by huawei updater, by dload folder and I can not fly to what it was before.
Can someone help me reverse the process? If you can give me the steps for this, I thank you.
debrand your phone or if its booting up
*#*#2846579#*#* find your country build
or vendor
then if you found 605 or C something
find your stock firmware that is
compatible with your vendor and
flash it via key combo
if dload key combo doesn't work
search for DC Phoenix
it might resurrect your device
goodluck
some questions
is your phone booting up to system?
are you able to enter recovery at least?
do you already unlocked your bootloader?
and last post the device detailed status..
Hi,
I really hope somebody can help. I've bricked my P20 Pro and looking for a solution...
Quick rundown of how I got here and relevant info:
Original model CLT-L09 8.1.0.103 (C782)
Rebranded with FunkyHuawei to CLT-L29
Was running firmware CLT-L29 8.1.0.110 (C782)
Updated to CLT-L29 8.1.0.120a (C432) using @Atarii 's method from this post https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 (booted fine, no issues except wasn't passing safetynet and build number was messed up when viewed in settings) so I wasn't happy and decided to flash back to CLT-L29 8.1.0.110 (C782) using the same method.
When I issued the adb commands
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_data_public.zip" >> /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_all_hw.zip" >> /cache/recovery/command
I did so as 3 separate commands - pressing enter after each echo command, instead of copy/pasting the whole command as one.
Rebooted to recovery and the update was verified and started to flash but phone went blank mid-way through and hasn't powered on since. Device was at 96% battery when started flashing.
I now can't boot to fastboot, eRecovery, system, recovery... nothing.
I have successfully installed drivers so that when I connect the phone with USB it is recognized as HUAWEI USB COM 1.0 in device manager.
I do believe there is some way to recover from this. I have tried FunkyHuawei unbrick tool but that requires to be booted in fastboot. Tried DC Phoenix but the board software for P20 pro is not available.
If anyone knows anything that might help me out of this situation I'd be eternally grateful.
Thanks!
Currently, there is no way to recover. That might change in the future.
No commercial unbricking tools support the P20 Pro yet. Even if you were to find board software (for example Mate 10 board software is compatible enough to get you into fastboot, most likely) you won't be able to flash everything you need to, as the tools to do so aren't yet compatible.
I think your two choices are to wait until P20 support can be added to commercial unbricking tools, or to try having the device repaired/replaced under warranty, as it will be diagnosed as a hardware problem by Huawei (and it very well may be, if it just shut off without warning like that.)
I did exactly the same thing. Nothing working at all. Not even fastboot. Will the service center be able to fix this?
I can't offer any help here, but would like to know what might have caused this. Do you think it was because you attempted to downgrade the firmware?
I believe so. I was on 120 and tried to install 107 as 120 did not report model correctly
I've read somewhere here on XDA threads you can anything with your p20 pro but no downgrade at least for right now.
djlukas1983 said:
I've read somewhere here on XDA threads you can anything with your p20 pro but no downgrade at least for right now.
Click to expand...
Click to collapse
Probably going by this guy's experience!
Good Luck Original Poster!
FWIW and I know it's of no help but SafetyNet Test always fails with new f/w but usually it gets approved within a few days. When I upgraded from 103 to 110 it took 5 days.
have u fixed?? i have same problem it doesn't show any image but I have p20
Elizage2015 said:
have u fixed?? i have same problem it doesn't show any image but I have p20
Click to expand...
Click to collapse
He got it swayed out pal, if you've done the same thing I'd say so the same, if the device is powerless then it'll just get swapped out for a new one.
dladz said:
He got it swayed out pal, if you've done the same thing I'd say so the same, if the device is powerless then it'll just get swapped out for a new one.
Click to expand...
Click to collapse
is there any chance to power on device?? (
Elizage2015 said:
is there any chance to power on device?? (
Click to expand...
Click to collapse
I couldn't power mine on at all. As @duraaraa said unbricking tools aren't supporting P20 Pro yet. I took mine back to my provider and they replaced the main board after they couldn't fix it
Elizage2015 said:
is there any chance to power on device?? (
Click to expand...
Click to collapse
Just get it swapped, if you can't see the device neither can they, straight swap
No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085
My p20 pro was in Huawei usb 1.0 mode. With the dc-unlocker tool I got into fastboot and retrieved my phone.
MichelKastro said:
My p20 pro was in Huawei usb 1.0 mode. With the dc-unlocker tool I got into fastboot and retrieved my phone.
Click to expand...
Click to collapse
can you tell wich steps you followed to retrieve your phone?
Hi , soft bricked my Huawei Mate 20 lite. Model is SNE-LX1 HW/EU. Did a firmware upgrade to frp unlock Since then get black screen with yellow text saying a new OS has been installed and device reboots in recovery. Reinstalled already different firmware versions via sload SD card upgrade + use fastboot to unlock FRP code. Fastboot unlock command completes successfully and device does automatically a low level format to then come back to "different os installed message. Anyone advice ?
Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.
djlman said:
Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.
Click to expand...
Click to collapse
Hi , the unlock code I purchased was for the FRP unlock because I was told would solve my problem and although the code is correct and allows to do a factory reset it will not solve the "you installed a new software ..." message. When looking online I found that I probably installed the wrong region code firmware but tried everything and cannot get the phone to boot normally. Any advise would be very appreciated.
Can you get to recovery or download?
I'm much more familiar with Samsung devices so my frame of reference is there. How did you flash the new rom? What tool? Where did you get the rom from?
Since you can reset to factory, but that still gives you the error, the only way I can think of so far, with the very little experience I have with Huawei devices, is to find two things if you can. First try to find a 3rd party recovery like TWRP or CWM or possibly use the tool you used to flash the ROM. Flash that if possible to the recovery partition. Then find the original factory firmware for your device and region, even if you have to go beck to Android 9. Then from recovery, or the tool you used to flash new rom, flash that. I'll do some research and see if I can find anything you haven't. From my limited searching for my own Mate 20 Lite, there doesn't seem to be much out there. What's your objective in all of this? Are you just looking to root? Did Hisuite play any role in this? The good news is I have the exact same device as you so I can try some things while it's not bricked
https://forum.xda-developers.com/t/...p30-pro-updated-on-03-12-2020.4032143/page-24 (this work is good.)