Bootloop after installing Xposed Framework v88 - Xposed General

TL,DR: My Sony Xperia E5803 Z5 Compact [MM 6.0.1] is stuck in a boot loop after I tried to downgrade/revert a “not active” Xposed Framework v89 [SDK23_v89.0_2017.12.17] to v88 [SDK23_v88.0_2017.10.08].
I tried getting into safemode as described here. I never got the phone to vibrate twice no matter how many times I pressed the Vol Up or Vol Down buttons.
Any help will be appreciated.
Status when everything was working fine:
Code:
Device: E5803 (Sony Xperia Z5 Compact)
Android version 6.0.1 (SDK 23)
ROM: 32.2.A.5.11 [E5803_Customized US_1298-3109_32.2.A.5.11_R4C]
Build fingerprint: Sony/E5803/E5803:6.0.1/32.2.A.5.11/3656371468
Platform: arm64-v8a, 64-bit binary
Xposed Installer: v 3.1.5 (was v3.0.1 by dvdandroid 26/11/16)
Xposed Framework: version 87 (SDK23_v87_2016.11.24, the modules were working fine)
TWRP: v3.0.2 (or maybe v3.1.0)
Attached:
Xposed error log 2018.07.09, 11.04 AM.log
Xposed error log 2018.07.09, 11.22 AM.log
Xposed error log 2018.07.09, 11.38 AM.log
Detail:
I had a perfectly working Xposed Framework version 87
I tried to update to Xposed Framework v89 from the Xposed Installer interface (direct DL via WiFi)
I got “Parse error. There was a problem parsing the package.”
I booted into TWRP recovery mode (from menu) and flashed xposed-v89-sdk23-arm64.zip [SDK23_v89.0_2017.12.17], rebooted
I got “Xposed Framework version 89 is installed but not active. Please check the logs for details.”
I booted into TWRP recovery and flashed the uninstaller “xposed-uninstaller-20180117-arm64.zip”
I wiped the Dalvik cache and tapped Reboot, "Android is starting... Optimizing app 43 of 196." (This took about 15 minutes)
I installed Xposed Framework v89 from the Xposed Installer interface itself
Rebooted.
Same “Xposed Framework version 89 is installed but not active”.
I booted into recovery mode and flashed the uninstaller “xposed-uninstaller-20180117-arm64.zip”
Rebooted into normal mode.
I booted into recovery mode and flashed the “xposed-v88-sdk23-arm64.zip” SDK23_v88.0_2017.10.08
Rebooting, LED flashed red 4 times, LED Light green, Sony logo, “Powered by android”, Rebooting, LED flashed red 4 times, > boot loop
I hold Vol Up + Power to force shutdown, 3 vibrations, phone is off.
I hold Vol Down + Power to boot into recovery, but it doesn’t.
It just shows the Sony logo, screen goes black, Sony logo, screen goes black, Sony logo, LED flashed red 4 times, and repeat in a loop.
Thank you for your support

Related

[Q] Softbrick/Bootloop after installing a Font under Xposed module Fonter

Am stuck in boot-loop when the phone(ROOTED) was rebooting after installing a new font using Fonter.
The device doesn't have CWM recovery, it has(accessed by holding Volume down and power button simultaneously) android system recovery(3e) where I tried both "wipe data/factory reset" and "wipe cache partition", still didn't work.
For flashing Stock ROM I need to use Smart Phone Flash Tool as its a MediaTek based phone. But I don' t have Android USB Driver installed and now since I can't switch on my phone the the Adb Driver Installer on my pc doesn't detect my phone to install the required drivers required before flashing using the Smart Phone Flash Tool .
Please help me recover my phone ANYHOW.
You can also disable the Xposed framework by repeatedly pressing the power button while booting the device (v2.5 or above). If you can. That's gonna be hard to do with bootloop.
Sent from my personal space station with the power of the minde!
Adywizard said:
You can also disable the Xposed framework by repeatedly pressing the power button while booting the device (v2.5 or above). If you can. That's gonna be hard to do with bootloop.
Sent from my personal space station with the power of the minde!
Click to expand...
Click to collapse
I am facing the similar problem. I have reformatted my rom twice and now in the 3rd time I am realizing that it happens when I try to install a font from Fonter Xposed Module. I tried your suggestion but I am unable to boot my device and the booting continues :crying::crying:
Bootloop after installing a Font under Xposed module Fonter
I am having the same problem.
I am using Lenovo Ideatab A1000-G.
After installing a font from Fonter my device underwent a reboot and it had not started till now.Tried Recovery mode Data Wipe and Wipe Cache but nothing happened.
It Stucks at the Lenovo Icon and startup sound is also coming but after that nothing is happening.
It just gives vibrates on pressing the buttons.
Guys,Please help...
If there is any solution then please send me
[email protected]:good::good::good:

[Solved] Black Scr & Download/Recovery unreachable Galaxy S7 / Xposed + Magisk

Hello everyone,
Here is the situation :
I just made a fresh install with full wipe of the latest SupermanRom without root in order to log in Snapchat, then I installed Magisk apk anf flashed Magisk V13.3. Until here, everythig was fine.
Then I wanted to try the unofficial Xposed framework : I installed the manager apk then downloaded the systemless Magisk compatible sdk 24 (SupermanRom 2.6 is Android 7.0) then reboot.
Here comes the problem : The phone (re)boots until the pin screen. This screen stays 2 or 3 seconds, then the screen goes of. I tried everything to type fast or anything, the phone doesn't react. When I press the power button to wake up the screen, nothing hapends.
So I thought, I just go back to full whipe and install the room again without Xposed, but I'm also unable to boot either in Recovery (Power + Home + Vol up) or Download (Power + Home + Vol down) mode !!!
The result without the SIM card is the same.
To sum up : Custom Rom + Magisk = OK phone working
But : Custom Rom + Magisk + Xposed = Unable to pin or boot in Recovery or Download mode.
During reboot, if i press the volume keys +/- the phone vibrates like in response... but nothing hapends. I never noticed it before...
Here I'm lost ! Does anyone have any idea of what I could do ? Is that a soft brick ? and how to get out of this situation ?
Please ask me for more information, and thank you in advance for those who will help me !
It's practically impossible that flashing magisk or any other thing brick your phone. Maybe the recovery it's gone for some strange reason but the download mode will be always here. Follow the steps here: http://www.android.gs/enter-samsung-galaxy-s7-download-mode/ (first result on Google...) to enter download mode and then use Odin to reflash it. If this doesn't work your phone is bricked but is very unlikely that it is caused by something you flashed.
EDIT: also because you say it power on until the PIN screen...
Raphaeldu68 said:
Hello everyone,
Here is the situation :
I just made a fresh install with full wipe of the latest SupermanRom without root in order to log in Snapchat, then I installed Magisk apk anf flashed Magisk V13.3. Until here, everythig was fine.
Then I wanted to try the unofficial Xposed framework : I installed the manager apk then downloaded the systemless Magisk compatible sdk 24 (SupermanRom 2.6 is Android 7.0) then reboot.
Here comes the problem : The phone (re)boots until the pin screen. This screen stays 2 or 3 seconds, then the screen goes of. I tried everything to type fast or anything, the phone doesn't react. When I press the power button to wake up the screen, nothing hapends.
So I thought, I just go back to full whipe and install the room again without Xposed, but I'm also unable to boot either in Recovery (Power + Home + Vol up) or Download (Power + Home + Vol down) mode !!!
The result without the SIM card is the same.
To sum up : Custom Rom + Magisk = OK phone working
But : Custom Rom + Magisk + Xposed = Unable to pin or boot in Recovery or Download mode.
During reboot, if i press the volume keys +/- the phone vibrates like in response... but nothing hapends. I never noticed it before...
Here I'm lost ! Does anyone have any idea of what I could do ? Is that a soft brick ? and how to get out of this situation ?
Please ask me for more information, and thank you in advance for those who will help me !
Click to expand...
Click to collapse
just keep (vol-) + (power) + (home key) more than 10 seconds and it goes to download mode just flash official firmware
Not Xposed but Magisk v13.3
Hello everyone,
After a good night - "La nuit porte conseil" (Sleep on it like the expression says) - I finally could go in TWRP (Recovery) again. Perhaps like clau_la2 says I didn't wait enough time pressing the buttons to get it boo in Recovery.
But as I thought it was Xposed was in cause, I got the problem again without Xposed, and I found that it was the combinaison with Magisk v13.3 who was unstable. So I downgraded to Magisk v13.1 and everything works fine now. I didn't try to reinstall Xposed for the moment. I'll do it later, when I'll have time on Holidays.
Massi-X That's what I tought, and you just confirmed this. I'm not a newbie in IT but Android is not my main subject, (Je travaille principalement dans les Réseaux & Télécoms) and I just was in panic because I couldn't even reach the Download mode to flash stock things through Odin.
So evrything works fine for the moment. I'll come back to post a feedback with Xposed when it'll be done.
Thanks for all guys, and have a nice weekend !
@Raphaeldu68
Do you play xposed systemless for Magisk version? Try to upload xposed classic version, on stock Nougat 7.0 S7 edge works xposed.
Yep I flashed the systemless Magisk compatible version. I'll try the stock one next time [emoji6] thanks for the feedback!
Envoyé de mon SM-G930F en utilisant Tapatalk
Xposed doesn't work well with Magisk, even on MM. I guess the problem lies in the Magisk root. Change to system Xposed and SuperSU, everything is working fine again. The only reason I need Magisk is to hide the root from Galaxy Gift app.
camapghe said:
Xposed doesn't work well with Magisk, even on MM. I guess the problem lies in the Magisk root. Change to system Xposed and SuperSU, everything is working fine again. The only reason I need Magisk is to hide the root from Galaxy Gift app.
Click to expand...
Click to collapse
@camapghe Thanks for your feedback, I guess so, but I'd like to keep Magisk to hide the root especially for banking apps and some others stuffs, so I'll try next week with the new Magisk beta 13.5 or 13.6 and come here to give a feedback.
Raphaeldu68 said:
@camapghe Thanks for your feedback, I guess so, but I'd like to keep Magisk to hide the root especially for banking apps and some others stuffs, so I'll try next week with the new Magisk beta 13.5 or 13.6 and come here to give a feedback.
Click to expand...
Click to collapse
I just tried the beta Magisk 13.6 few hours ago. Everything is fixed. There is also a modified version of Magisk Xposed that doesn't f*ck up the whole system.
In short, everything is 99% fixed.

Magisk not running after Install via TWRP

I have magisk intalled on my S4 and when I press the buttons to boot till the blue message poöps up and I let go of the buttons it boots me into TWRP and not in the System.

Magisk patched recovery boot freeze

I somehow managed a while back to patch EMUI 9.10.387 with Magisk and got it to boot every time with the patched image without having to press power + vol+. All was fine...
Then, I stupidly updated Magisk modules (running v23) and pressed "reboot now" after the upgrade instead of powering off and rebooting. The phone went into a bootloop then I managed to boot to erecovery without recovering the phone. After that the phone booted normally BUT without magisk.
Since then, I have flashed several times the recovery (fastboot flash recovery_ramdisk xxx") with previously working recovery_ramdisk images. After flashing, when holding power + vol+ the phone displays the "short" warning message (there is a long one displaying options) boots but then gets stuck at the Huawei logo.
Now I can only boot the phone without holding vol+ and then it does boot but without magisk.
Any idea about what happened and how to get magisk back?
I forgot to add that strangely all standard Huawei apps I had removed (pm uninstall) are back: mirror, huawei wallet...etc.
I think I found the culprit. Since the issue appeared after updating magisk, I assume one module must have caused the issue. I found a guide on how to delete magisk modules from TWRP (google it).
I flashed TWRP, booted into TWRP and used the file manager. One issue: data is encrypted and so the folders displayed garbage AND instead of deleting /data/adb/modules I deleted a bunch of folders in /data/adb...
Once done I rebooted and reinstalled Magisk: it asked to install more stuff, confirmed and rebooted. All fine.
Don't touch a working system!

Galaxy note 9 restarts randomly after magisk updation.

My Galaxy Note 9 running on Custom rom had no problems.. Just updated the magisk( module not magisk manager app) to latest version and direct installed (as recommended by magisk) after that my phone having following problems.
1.No action on pressing reboot on magisk after flashing. As reboot not working magisk is not getting updated also..
2.Power off and restart options stopped working.. Phone is not powering off or restarting by any means using physical buttons or software options.
3. Phone is restarting automatically in every 10 minutes.
4. Can't enter in to twrp recovery as phone is not powering off its gets restarted randomly very quickly..
Can someone help to get out of this.
Minzlife said:
My Galaxy Note 9 running on Custom rom had no problems.. Just updated the magisk( module not magisk manager app) to latest version and direct installed (as recommended by magisk) after that my phone having following problems.
1.No action on pressing reboot on magisk after flashing. As reboot not working magisk is not getting updated also..
2.Power off and restart options stopped working.. Phone is not powering off or restarting by any means using physical buttons or software options.
3. Phone is restarting automatically in every 10 minutes.
4. Can't enter in to twrp recovery as phone is not powering off its gets restarted randomly very quickly..
Can someone help to get out of this.
Click to expand...
Click to collapse
as soon as before showing samsung note9 logo, press and hold the button combination vol up + bixby + power.
keep it pressed the entire time. at one point you will able to enter the TWRP

Categories

Resources