Database Develop

What are you TD2 users doing about accidental touches?

Just curious...in the TD1, I used S2U2 to avoid accidental touches to the screen but as the TD2 already has the side to answer/end .. what do you use now?
I'm having a few issues I did when I got the first diamond where if someone calls, or you call out via bluetooth, the phone screen turns on
Usually end up hanging up on someone when I call them because the screen touches the pouch/pocket etc
I think there are a few apps to disable screen apart from hard keys etc - just curious what the majority use

akash_84 said:
Just curious...in the TD1, I used S2U2 to avoid accidental touches to the screen but as the TD2 already has the side to answer/end .. what do you use now?
I'm having a few issues I did when I got the first diamond where if someone calls, or you call out via bluetooth, the phone screen turns on
Usually end up hanging up on someone when I call them because the screen touches the pouch/pocket etc
I think there are a few apps to disable screen apart from hard keys etc - just curious what the majority use
Click to expand...
Click to collapse
Is there a tweak for this in ACT? With my t pro when a call goes thru the screen goes dark almost immediatly, so I have the opposite prob as I need to use the kp to enter numbers sometimes. I could see where using bt it could be an issue tho.

I was wondering if the D2 came with a proximity or light sensor to disable/turn off the screen while it is against your face. I hate my Elfin.... I'm always pressing things with my face and getting into all kinds of menus.
My brothers Behold has sensors that shut the screen off. As of recently I have been pressing the power button to turn off the screen after I answer. Can't wait till mine ships on the 11th.

HTC Touch Freak said:
I was wondering if the D2 came with a proximity or light sensor to disable/turn off the screen while it is against your face. I hate my Elfin.... I'm always pressing things with my face and getting into all kinds of menus.
My brothers Behold has sensors that shut the screen off. As of recently I have been pressing the power button to turn off the screen after I answer. Can't wait till mine ships on the 11th.
Click to expand...
Click to collapse
I asked the same question in another thread, and would be very curious about the answer, especially since gsmarena.com does not mention it as a feature, in comparison to the D1.
the iPhone has this feature...and I really can't imagine the D2 to do not have it. I hope I won't be surprised negatively.

i presume it does
Bearing in mind it automatically dims the backlight, and increases it. It must have one somewhere!.

Juggles said:
Bearing in mind it automatically dims the backlight, and increases it. It must have one somewhere!.
Click to expand...
Click to collapse
I sure hope. I read that the Touch Pro2 has it so I'm hoping that the TD2 does also. If not that would be a shame. Good thing I'm getting used to pressing the power button right after I answer.

The D2 does come with a proximity light that dims the screen. If you look at the manual it's listed in the diagram specs page as well.

DaBountyHunter said:
The D2 does come with a proximity light that dims the screen. If you look at the manual it's listed in the diagram specs page as well.
Click to expand...
Click to collapse
Sweeeet!!!

DaBountyHunter said:
The D2 does come with a proximity light that dims the screen. If you look at the manual it's listed in the diagram specs page as well.
Click to expand...
Click to collapse
that sounds really great! but does it mean that it's inactivated too? dimming is indeed good, especially in the dark not to have a glowing ear - but i was wondering if, with the dimming, comes the inactivation of the screen too, in order to avoid accidental pressing of buttons with the ear/face.

Nexus One hardware issue.

ok it doenst happen when i lay the phone down on the surface and click on the screen it works perfectly
however when i hold it with my right hand and touch the middle of the screen with my thumb
it opens up phone dialer, or appdrawer or vibrante cause it clicks the capacitive button.
when i hold it with my left hand it gets a little bit better but it still does.
if i hold the nexus carefully and touch the screen , it works, when i hold it like this
the things gets better when i put a thick case like otterbox..
is this a hardware issue? ( found similar video on youtube)
my phone is rooted but can i still get a replacement phone?( already put everything back to stock)
and if i do get a replacement, are they going to charge me with anything?
my current nexus one trackball doenst scroll up but everything else works.
How many of you guys got a replacement even though your phone was rooted?

Make sure part of your hand doesn't touch the screen.
Sent from my Google Phone

it's a hardware issue...
all you can do is not grip the phone too closely to the edge of the screen. It registers touches even if you are not touching the screen completely. But that to be a problem you have to have giant hands
I've had this happen to me once since I had it from launch day. It did happen with my Otterbox commuter series, and a clarivue screen protector. But I turned it off and on again and it was fine.
anyway as stevio jobsio whould say, you're holding it wrong

ChongoDroid said:
Make sure part of your hand doesn't touch the screen.
Sent from my Google Phone
Click to expand...
Click to collapse
ok so it is a hardware issue?
no i am not touching any part of the screen. i made sure i wasnt touching the screen.
but it does happen when i hold my phone closely to the edges.
i never had this kind of issues with other touch screen phones..

Well I dunno... One finger at a time and your good to go unless you got fat hands lol
Sent from my Google Phone

I can confirm that my device too does this. When lying in bed I browse the net with one hand and try and scroll....the edges of the touchscreen seem to register depression when the chassis is pushed or gripped too hard also.
It's a minor irritation to me, but I agree it is a hardware issue.

[Q] Unable to unlock screen while call in progress.

Hi All,
I have a sim free One and the problem i have is I am unable to unlock the screen while a call is in progress. I can press the power button to turn the screen on but if I try to unlock the screen , it goes off again so I am pretty stuck with a phone unusable during a call. I ll have to tell the person on the other end to disconnect in order that I can access the phone again, I cant use speaker phone while making notes or reading out from the phone.
Should I send this back please?
Thanks in advance.

Sounds like something is covering the proximity sensor. You got a case or screen protector on it that might be covering that?

MinecraftZombi.es said:
Sounds like something is covering the proximity sensor. You got a case or screen protector on it that might be covering that?
Click to expand...
Click to collapse
I dont have a case neither do I have a screen protector on.

Have you installed any brightness mods or anything like that which mught be misbehaving?
Or any programs which have functions for customising the brightness, power etc?
If no, then it sounds like your proximity sensor might be a bit over sensitive, and firing off all the time thinking it's next to your head.

[Q] Screen stays off during call no matter what I do!

When I am in a call, putting the phone to my face turns the screen off using the proximity sensor. However, removing the phone from my face does not turn the screen back on. Nothing turns it back on even if I push all the buttons or hold them or do anything unless the other person hangs up. I cannot remember when it started....before or after the recent update.....but it did start very recently. Any ideas? If I turn off the proximity sensor during calls it works fine by locking and unlocking the screen with the buttons.

MNDZA said:
When I am in a call, putting the phone to my face turns the screen off using the proximity sensor. However, removing the phone from my face does not turn the screen back on. Nothing turns it back on even if I push all the buttons or hold them or do anything unless the other person hangs up. I cannot remember when it started....before or after the recent update.....but it did start very recently. Any ideas? If I turn off the proximity sensor during calls it works fine by locking and unlocking the screen with the buttons.
Click to expand...
Click to collapse
Is anything covering the front facing camera, or light sensor? Like a case, bad screen protector, etc....
Does your front facing camera work just fine as a camera?
How about air gestures? Do they work?
I'm asking these things because it seems your proximity sensors aren't working properly. Your phone thinks it's next to your head all the time, so it's not waking the screen until the other person ends call. We need to find out which one is acting up and why.

The front camera works, but in my office it seems VERY sensitive to light. The lights are glaring heavily. I never use the front camera so I don't know if that's normally how it was. Air gestures work when the screen is on (swiping left and right to view my photos), but the quick glance won't work when the phone is locked. The weird thing is that quick glance works when I do the "try it" tutorial only.
440bro said:
Is anything covering the front facing camera, or light sensor? Like a case, bad screen protector, etc....
Does your front facing camera work just fine as a camera?
How about air gestures? Do they work?
I'm asking these things because it seems your proximity sensors aren't working properly. Your phone thinks it's next to your head all the time, so it's not waking the screen until the other person ends call. We need to find out which one is acting up and why.
Click to expand...
Click to collapse

Ok now it seems quick glance DOES work when the phone is off....I just couldn't do it correctly.
Main problem still exists though.

What rom are you using
Sent from my SAMSUNG-SM-N900A using Tapatalk

My note 2 started like this also. I don't know what's wrong with it.
Sent from iNew V3 using Tapatalk

My phone is completely stock and not rooted.

MNDZA said:
My phone is completely stock and not rooted.
Click to expand...
Click to collapse
then i would contact att and get a warrenty replacement

jerrycoffman45 said:
then i would contact att and get a warrenty replacement
Click to expand...
Click to collapse
I was thinking that, but I'm tempted on resetting my phone and seeing if that helps. The problem is that I would lose all my app data and I'd hate to deal with that.

MNDZA said:
I was thinking that, but I'm tempted on resetting my phone and seeing if that helps. The problem is that I would lose all my app data and I'd hate to deal with that.
Click to expand...
Click to collapse
att will ask you to do that when you call

MNDZA said:
When I am in a call, putting the phone to my face turns the screen off using the proximity sensor. However, removing the phone from my face does not turn the screen back on. Nothing turns it back on even if I push all the buttons or hold them or do anything unless the other person hangs up. I cannot remember when it started....before or after the recent update.....but it did start very recently. Any ideas? If I turn off the proximity sensor during calls it works fine by locking and unlocking the screen with the buttons.
Click to expand...
Click to collapse
Unfortunately this sounds like a bad proximity sensor. This can be verified by testing the sensor by dialing *#0*#
I had this happen to my last Note 3. The only difference was I could turn the screen back on with the home button.

done12many2 said:
Unfortunately this sounds like a bad proximity sensor. This can be verified by testing the sensor by dialing *#0*#
I had this happen to my last Note 3. The only difference was I could turn the screen back on with the home button.
Click to expand...
Click to collapse
I tried that *#0*# test and I can activate the proximity sensor, but it seems to stay on after that.

This is a known issue with our phone. I had this issue myself. Plenty of times. Just call ATT and ask for a replacement.

Yeah I just found this:
http://forums.androidcentral.com/sa...-3-proximity-sensor-issue-during-calls-5.html

It's not a software issue use canned air and blow by the speaker and the headphone jack als o press on the back of the phone . This has happened to me
Sent from my SAMSUNG-SM-N900A using xda app-developers app

i stumbled upon this thread and took my phone apart and sure enough there was lint in it. in the dial pad using the *#0*# method, when i covered the sensor the screen would light green, vibrate, and stay that way after i moved my hand away. i cleaned it and everything is perfect!!!

Try this
https://www.youtube.com/watch?v=fls4NIRJ1IQ&feature=youtube_gdata_player
Sent from my Note 3 SM-N900A rooted by Designgears

ZUK Z1 - Hardware button light intensity

Hey all
After reading this forum for ages I took the plunge on a Z1, and am not disappointed!
I had one question, if anyone is able to help.
The hardware buttons light up with a nice white LED.
However, the one on the left (select open apps) is much, much brighter than the one on the right (back).
In fact, it's almost as if the right hand one doesn't work at all.
Is this the same as everyone else's phone, or does mine have a defect?
Many thanks to anyone that can compare theirs.
Uri

P.S: I have the grey one with the black front, which may make this more noticeable.
Uri

someoneelse999 said:
Hey all
After reading this forum for ages I took the plunge on a Z1, and am not disappointed!
I had one question, if anyone is able to help.
The hardware buttons light up with a nice white LED.
However, the one on the left (select open apps) is much, much brighter than the one on the right (back).
In fact, it's almost as if the right hand one doesn't work at all.
Is this the same as everyone else's phone, or does mine have a defect?
Many thanks to anyone that can compare theirs.
Uri
Click to expand...
Click to collapse
Is a hardware issue, I think.
My 2 buttons has the same light intensity and is a good intensity.
In my previous prone, a OnePlus One, I have suffered this issue: the back button had a lower light intensity compared to the other buttons.

bartito said:
Is a hardware issue, I think.
My 2 buttons has the same light intensity and is a good intensity.
In my previous prone, a OnePlus One, I have suffered this issue: the back button had a lower light intensity compared to the other buttons.
Click to expand...
Click to collapse
Thanks very much for the quick reply
To be honest, everything else about the phone is perfect (screen, fingerprint scanner, buttons don't wobble, etc), so for the first time in my life I might just live with "almost-perfect".
I had too many issues with iPhones and am worried if I swap it out, then the replacement will have some other defect like screen bleed, etc, etc.
Uri

someoneelse999 said:
Thanks very much for the quick reply
To be honest, everything else about the phone is perfect (screen, fingerprint scanner, buttons don't wobble, etc), so for the first time in my life I might just live with "almost-perfect".
I had too many issues with iPhones and am worried if I swap it out, then the replacement will have some other defect like screen bleed, etc, etc.
Uri
Click to expand...
Click to collapse
If you can live with this issue: Don't return it!
I also haven't returned my OPO. Is a small detect I think

Easy to fix
I had this issue too, but it is easy to fix. When you open your phone backcover, you only have to remove the speaker and reposition the led. The led is loose in a cable and so you can reposition it until the buttons have the same intensity and fix it with some glue.
On my phone the intensity is now exactly the same and i only needed half an hour for it.
When you remove the backcover warm it up a bit and use a sucker to avoid scratches in the frame.

Well I can confirm that I have the same issue on my white Zuk! But it's not very noticeable so i'm keeping it like it is!

microdoof said:
I had this issue too, but it is easy to fix. When you open your phone backcover, you only have to remove the speaker and reposition the led. The led is loose in a cable and so you can reposition it until the buttons have the same intensity and fix it with some glue.
On my phone the intensity is now exactly the same and i only needed half an hour for it.
When you remove the backcover warm it up a bit and use a sucker to avoid scratches in the frame.
Click to expand...
Click to collapse
Don't seems too easy to remove the Zuk Z1 backcover if you don't are McGiver

bartito said:
Don't seems too easy to remove the Zuk Z1 backcover if you don't are McGiver
Click to expand...
Click to collapse
Wasn't very hard to remove, i didn't brake any clips. Use a sucker and as soon as you see a little gap, use a plastic pick or your fingernails to gently pull up the backcover.
After i opened it i removed the tape from the phone and the backcover. After the work is done you can simply close the Backcover without tape or something. I didn't use tape and had no gaps afterwards.

microdoof said:
Wasn't very hard to remove, i didn't brake any clips. Use a sucker and as soon as you see a little gap, use a plastic pick or your fingernails to gently pull up the backcover.
After i opened it i removed the tape from the phone and the backcover. After the work is done you can simply close the Backcover without tape or something. I didn't use tape and had no gaps afterwards.
Click to expand...
Click to collapse
I just tried that; broke some pins immediately, they seem to be of very soft plastic... So i would recommend others not to do it

othe01 said:
I just tried that; broke some pins immediately, they seem to be of very soft plastic... So i would recommend others not to do it
Click to expand...
Click to collapse
I supposed...

microdoof said:
Wasn't very hard to remove, i didn't brake any clips. Use a sucker and as soon as you see a little gap, use a plastic pick or your fingernails to gently pull up the backcover.
After i opened it i removed the tape from the phone and the backcover. After the work is done you can simply close the Backcover without tape or something. I didn't use tape and had no gaps afterwards.
Click to expand...
Click to collapse
Hi guys, even I have noticed the same, the back button light is dimmer than task button. Can somebody suggest if I should get it replaced?

aniketsabarad said:
Hi guys, even I have noticed the same, the back button light is dimmer than task button. Can somebody suggest if I should get it replaced?
Click to expand...
Click to collapse
Same for me. back button light intensity is very low compared to menu button. Its not a big issue. My friend also having same issue. you may get same problem in that replacement unit also. So,better keep as it is.

@arunpkrt and @aniketsabarad If you don't mind there is also an option inside the Zuk Z1 lights configuration to switch off this little ugly menu LED and back LED. The function itself stays active and the touch area is large enough to hit the sensitive zone blinded easily .

arunpkrt said:
Same for me. back button light intensity is very low compared to menu button. Its not a big issue. My friend also having same issue. you may get same problem in that replacement unit also. So,better keep as it is.
Click to expand...
Click to collapse
You guys are right. I faced this problem initially. The phone was perfect, I set it up nicely and was using it. But after a day or two this back button led issue started frustrating me. I applied for a replacement and was surprised to see that even the replacement unit had same issue. So really no point getting it replaced. If it really bothers, you can take the risk to open up the back case as other members suggested.

I also have the same issue but its not important because im using onscreen keyboard.
Overall is perfect but one thing is missing. We still dont have marshmallow to enjoy before Android N release.
Edit: Happy 500th post to me! God Bless!

I don't have the issue, but if ever I had it, it won't matter as I disabled the hardware buttons once I started using mine. 5.5" is too much of a screen and the 3 on screen buttons don't take up that much space. I am much worried about pressing the hard home button because I read from some users that it failed after 2 or three months of using the phone. I only use it for finger print. No need to press it. Double tap to wake, double tap to sleep. No hard buttons to wear.

bluestricker_21 said:
I also have the same issue but its not important because im using onscreen keyboard.
Overall is perfect but one thing is missing. We still dont have marshmallow to enjoy before Android N release.
Edit: Happy 500th post to me! God Bless!
Click to expand...
Click to collapse
Mine has the same problem, if I where you I would just keep it that way and don't go to all the trouble to send it back.
You can also Disable the lights thats what I did