Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Access to the original/official firmware for SM-G900F would be extremely helpful for me as well.
I'm running LOS 16 with pico GApps very happily on my S5, however I have mobile data connectivity issues. Data connects and disconnects at random; this is device-dependent (swapping the SIM into other devices gives fully functional data connectivity).
My baseband is G900FXXU1BOA3; I believe updating the modem might fix this?
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
Fox, you may download the official firmware at https://samsung-firmware.org/model/SM-G900F/
Select your region to get the right ***.md5.tar file to flah via Odin latest.
This will reset your handheld to out of box - original recovery reinstalled - you must reflash it also via Odin if you want to go back to custom Rom..
Good luck
.
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
kwajongen said:
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
Click to expand...
Click to collapse
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Captain Kangaroo said:
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Click to expand...
Click to collapse
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
kwajongen said:
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
Click to expand...
Click to collapse
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
2. Basically you can search websites that had official Samsung stock firmware. Search your region of your device and (IMPORTANT!) your model, in your case, is G900F. (Wow same as mine but different region, Snapdragon rocks).
3. To your network problem, I think you need to wait. There is no other option.
Thanks!
Edit: https://forum.xda-developers.com/showthread.php?t=2715487
XDA forums has one. Tip: if your region isn't there, the replies have all the filmwares you can have.
Captain Kangaroo said:
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
Click to expand...
Click to collapse
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
OfficialJohnGL4 said:
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
Click to expand...
Click to collapse
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
kwajongen said:
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
Click to expand...
Click to collapse
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
kwajongen said:
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
Click to expand...
Click to collapse
When it said that you go back to stock one to fix it. Then want if it is not stock? The message is still there. Its normal if you want to install a custom ROM other than the stock one. I reinstall the stock and install custom ROM again once. It still happened.
I don't know how to remove the text but still have a custom ROM tho.
As for the SD card message, I encountered times before. Maybe you need to format using the computer.
Captain Kangaroo said:
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
Click to expand...
Click to collapse
When I reflash the stock ROM TWRP is still there. However no "Set warranty: kernel" appeared. Maybe its just when you install a custom ROM or something, I don't know.
OK guys,
Lineage 16 is installed, everything went smoothly, however when I connect the USB, the phone just shows as 'SM-G900F' on my W10 PC and cannot be expanded, basically no Phone and SD Card folders.
I can see them in the phone no problem, but once I connect it, I am not prompted with the usual message on what I want to do, like file transfer etc. and on the left menu appears only the model of the phone.
I had no issues when I flashed the original firmware, so it must be related to Lineage.
I also installed the Android USB drivers, but no go.
Changing the USB Preferences, to PTP or File Transfer only allows me to see the phone, no SD.
I also tried a new SD, no success.
I am stuck again... Jeez it takes days to get this stuff to work, you do one step ahead and another back
Ideas?
Alex
Anyone?
Shall I ask the question in the Lineage section?
'Set warranty :kernel' means you are running a custom kernel. Any modified boot.IMG can cause this message. It doesn't mean you need to use stock room. This appears even in stock rom with magisk or SuperSU.
Hello,
I'm french, excuse my langage...
I have 2 note 8, an N950F (single sim) and an N950FD (double sim). I specify immediately that the 2 have already worked and that I have only one sim (one being for me and the other as a gift for my wife lol)
- On the N950F, install via odin 3.14 of twrp 33.1.2, then hadesrom 12 then magisk 20.4 => everything is ok
- Purchase of the N950FD, hassle with installing twrp because I had to put my sim in it to change the time and have access to the usb options, in short, it works, then same as hades and magisk => everything is ok
I have well customized the N950FD, I made a full save (all partitions) with twrp and I said to myself I do a full install on the N950F ...
At the time I did not watch out ...
I calmly use the N950FD and then, I still hack the N950F, I install other custom roms to see, lineage 17, etc etc and all that I do it without sim, with the dex dock connected in ethernet, in me saying that when I'm done, my wife will just put her sim there ...
And then something bothers me, it's a small prohibition logo at the top left instead of the network. I tell myself that this is normal because I did not put a sim, so I take that of my N950FD and there bah it is not recognized ...
I do not panic, I tell myself that I made a false manipulation, I wipe, I reinstall hadesrom and same concern, I take another custom rom and same concern ... I redo a full install with twrp and same concern .. .
I take a stock rom (the last, then the first, always in 4 files either with the csc or with the home-csc), I flash with odin 3.14 and 3.13 and always the same problems, the rom remains blocked on the screen samsung, the first with "samsung note 8 powered by android". So I tried the last rom with 3.14 and 3.13 then the first and still the same problem, it does not start (I waited 5 minutes roughly) despite the wipes ...
Since I no longer have twrp, I reflash, it works, I tell myself that the custom was still installed and I reflash via twrp hades (I tried the stock rom file but it didn't work) and again same concern, the sim is not recognized ...
I try the flash of the hades kernel, it works but the sim is still not recognized ...
When I go to the phone * # 06 # I do not have imei, but a black screen, when I go to parameter / connection / sim card manager => black screen with the message "com-android-phone does not respond" ...
I looked a little on the net, but nothing conclusive, I specify that all my files come from XDA but that given my English I prefer to try to find an answer in French ...
I do not have a backup of the N950F it would have been too simple, I tried another sim than mine but ditto it is not recognized and before making a tablet I would like to try everything to recover it. ..
It would seem that flashing a stock rom solves the problem ... But as said above, my phone remains stuck on the samsung logo despite the wipes
I still tried other things like just flashing parts of a stock rom but I still have the same problem ...
I also tried the flash of a stock with the extra pit and the nand erase and distribution options ... and similar, no start ...
I even reinstalled twrp after a stock, save it, "mix" it with another backup I had (efs and modem from the stock and the rest of the custom) but then again, it doesn't work, such reboots well but still no network access and no recognized sim card ...
Finally, I looked at chimera tool, but no tutorial in French so no way to see how it works or if it will meet my need ... taking an exclusive samsung license on chimera does not cause me any concern IF it allows me to do other things than what I have already tried ...
I also looked at the prog to change the imei because there is nothing left, not even 0, no no, a black page just like when I go to the sim card settings, I have a black page. ..
I also flashed several custom roms from different countries but it didn't work ...
By cons I observed that I had the location for 2 sim, still inactive ...
How to put the note 8 in single sim and recover imei and then the network ???
there, I block ... if you have ideas I am taker, thank you all ...
amthium said:
Hello,
I'm french, excuse my langage...
I have 2 note 8, an N950F (single sim) and an N950FD (double sim). I specify immediately that the 2 have already worked and that I have only one sim (one being for me and the other as a gift for my wife lol)
- On the N950F, install via odin 3.14 of twrp 33.1.2, then hadesrom 12 then magisk 20.4 => everything is ok
- Purchase of the N950FD, hassle with installing twrp because I had to put my sim in it to change the time and have access to the usb options, in short, it works, then same as hades and magisk => everything is ok
I have well customized the N950FD, I made a full save (all partitions) with twrp and I said to myself I do a full install on the N950F ...
At the time I did not watch out ...
I calmly use the N950FD and then, I still hack the N950F, I install other custom roms to see, lineage 17, etc etc and all that I do it without sim, with the dex dock connected in ethernet, in me saying that when I'm done, my wife will just put her sim there ...
And then something bothers me, it's a small prohibition logo at the top left instead of the network. I tell myself that this is normal because I did not put a sim, so I take that of my N950FD and there bah it is not recognized ...
I do not panic, I tell myself that I made a false manipulation, I wipe, I reinstall hadesrom and same concern, I take another custom rom and same concern ... I redo a full install with twrp and same concern .. .
I take a stock rom (the last, then the first, always in 4 files either with the csc or with the home-csc), I flash with odin 3.14 and 3.13 and always the same problems, the rom remains blocked on the screen samsung, the first with "samsung note 8 powered by android". So I tried the last rom with 3.14 and 3.13 then the first and still the same problem, it does not start (I waited 5 minutes roughly) despite the wipes ...
Since I no longer have twrp, I reflash, it works, I tell myself that the custom was still installed and I reflash via twrp hades (I tried the stock rom file but it didn't work) and again same concern, the sim is not recognized ...
I try the flash of the hades kernel, it works but the sim is still not recognized ...
When I go to the phone * # 06 # I do not have imei, but a black screen, when I go to parameter / connection / sim card manager => black screen with the message "com-android-phone does not respond" ...
I looked a little on the net, but nothing conclusive, I specify that all my files come from XDA but that given my English I prefer to try to find an answer in French ...
I do not have a backup of the N950F it would have been too simple, I tried another sim than mine but ditto it is not recognized and before making a tablet I would like to try everything to recover it. ..
It would seem that flashing a stock rom solves the problem ... But as said above, my phone remains stuck on the samsung logo despite the wipes
I still tried other things like just flashing parts of a stock rom but I still have the same problem ...
I also tried the flash of a stock with the extra pit and the nand erase and distribution options ... and similar, no start ...
I even reinstalled twrp after a stock, save it, "mix" it with another backup I had (efs and modem from the stock and the rest of the custom) but then again, it doesn't work, such reboots well but still no network access and no recognized sim card ...
Finally, I looked at chimera tool, but no tutorial in French so no way to see how it works or if it will meet my need ... taking an exclusive samsung license on chimera does not cause me any concern IF it allows me to do other things than what I have already tried ...
I also looked at the prog to change the imei because there is nothing left, not even 0, no no, a black page just like when I go to the sim card settings, I have a black page. ..
I also flashed several custom roms from different countries but it didn't work ...
By cons I observed that I had the location for 2 sim, still inactive ...
How to put the note 8 in single sim and recover imei and then the network ???
there, I block ... if you have ideas I am taker, thank you all ...
Click to expand...
Click to collapse
If you didn't take a backup of your /efs folder which is where all of the phones important information is stored such as your IMEI then you are screwed because you can't flash any other phones EFS FOLDER.. However if you have a backup efs folder, restore it.
the concern is that I do not have a backup of the efs file ...
is it possible to put an efs file of another note 8 n950f and where to find this file on the net?
amthium said:
the concern is that I do not have a backup of the efs file ...
is it possible to put an efs file of another note 8 n950f and where to find this file on the net?
Click to expand...
Click to collapse
MrMike has already answered this, you can't share or use any other EFS.
The fact you can flash a custom rom and it will boot tells me you don't have a hardware issue, try flashing stock again as this can sometimes fix the EFS file, it has done for me in the past and a few others users. Although I can't tell you why you get stuck after flashing stock, this is the best way for you to hopefully resolve your issue as you don't have a EFS backup.
Except by flashing a stock, is there a way to restore the n950f to factory condition?
because with odin, if I flash the last stock, it does not start even if I make the wipes and if I try an old stock, odin blocks ...
can the chimera program allow me to find an original n950f?
amthium said:
Except by flashing a stock, is there a way to restore the n950f to factory condition?
because with odin, if I flash the last stock, it does not start even if I make the wipes and if I try an old stock, odin blocks ...
can the chimera program allow me to find an original n950f?
Click to expand...
Click to collapse
Not that I am aware of, I am only aware of restoring by flashing stock with Odin or by using Samsung smartswitch.
You can't flash older filmware than what is already on the phone, that is why Odin is blocking that, but when you flash the latest filmware does Odin give you the green pass?
I am not familiar with the Chimera program so can't speak on that.
Yes with odin I have the green pass, but then the note 8 does not start, it remains blocked on the logo, even if I do the wipe ...
I even tried to save right after with twrp and recover the efs but it does not work ...
If I find a broken Note 8 can I recover the efs file by saving it and then putting it on my own?
hainguyenthao said:
Device will not boot while there is an error in efs partition so u need to fix it first i have same device and i can help you to boot it
Click to expand...
Click to collapse
Thanks for your help, how to start it in stock rom?
I specify that it starts in custom rom ...
the first photo is before the installation of the stock rom with odin, the second is at the end of the installation (odin ok, pass in green), the third is after the restart which has not worked (blocking on samsung note 8)
hainguyenthao said:
Sorry error when loading images 404 Not Found upload it again or send it to my email
Click to expand...
Click to collapse
Could you please explain to us all in here how you're going to fix his /efs folder when he never made a backup of it.. Where are you planning on getting him an /efs folder that held all of his phone's information when he accidentally deleted it?
hainguyenthao said:
By root device and download Root Explorer, browse to the efs folder the delete everything EXCEPT the 'FactoryApp' and 'prov_data' folders it should restore IMEI
Click to expand...
Click to collapse
I gave this a shot but it didn't work for me.