Hello,
I'm french, excuse my langage...
I have 2 note 8, an N950F (single sim) and an N950FD (double sim). I specify immediately that the 2 have already worked and that I have only one sim (one being for me and the other as a gift for my wife lol)
- On the N950F, install via odin 3.14 of twrp 33.1.2, then hadesrom 12 then magisk 20.4 => everything is ok
- Purchase of the N950FD, hassle with installing twrp because I had to put my sim in it to change the time and have access to the usb options, in short, it works, then same as hades and magisk => everything is ok
I have well customized the N950FD, I made a full save (all partitions) with twrp and I said to myself I do a full install on the N950F ...
At the time I did not watch out ...
I calmly use the N950FD and then, I still hack the N950F, I install other custom roms to see, lineage 17, etc etc and all that I do it without sim, with the dex dock connected in ethernet, in me saying that when I'm done, my wife will just put her sim there ...
And then something bothers me, it's a small prohibition logo at the top left instead of the network. I tell myself that this is normal because I did not put a sim, so I take that of my N950FD and there bah it is not recognized ...
I do not panic, I tell myself that I made a false manipulation, I wipe, I reinstall hadesrom and same concern, I take another custom rom and same concern ... I redo a full install with twrp and same concern .. .
I take a stock rom (the last, then the first, always in 4 files either with the csc or with the home-csc), I flash with odin 3.14 and 3.13 and always the same problems, the rom remains blocked on the screen samsung, the first with "samsung note 8 powered by android". So I tried the last rom with 3.14 and 3.13 then the first and still the same problem, it does not start (I waited 5 minutes roughly) despite the wipes ...
Since I no longer have twrp, I reflash, it works, I tell myself that the custom was still installed and I reflash via twrp hades (I tried the stock rom file but it didn't work) and again same concern, the sim is not recognized ...
I try the flash of the hades kernel, it works but the sim is still not recognized ...
When I go to the phone * # 06 # I do not have imei, but a black screen, when I go to parameter / connection / sim card manager => black screen with the message "com-android-phone does not respond" ...
I looked a little on the net, but nothing conclusive, I specify that all my files come from XDA but that given my English I prefer to try to find an answer in French ...
I do not have a backup of the N950F it would have been too simple, I tried another sim than mine but ditto it is not recognized and before making a tablet I would like to try everything to recover it. ..
It would seem that flashing a stock rom solves the problem ... But as said above, my phone remains stuck on the samsung logo despite the wipes
I still tried other things like just flashing parts of a stock rom but I still have the same problem ...
I also tried the flash of a stock with the extra pit and the nand erase and distribution options ... and similar, no start ...
I even reinstalled twrp after a stock, save it, "mix" it with another backup I had (efs and modem from the stock and the rest of the custom) but then again, it doesn't work, such reboots well but still no network access and no recognized sim card ...
Finally, I looked at chimera tool, but no tutorial in French so no way to see how it works or if it will meet my need ... taking an exclusive samsung license on chimera does not cause me any concern IF it allows me to do other things than what I have already tried ...
I also looked at the prog to change the imei because there is nothing left, not even 0, no no, a black page just like when I go to the sim card settings, I have a black page. ..
I also flashed several custom roms from different countries but it didn't work ...
By cons I observed that I had the location for 2 sim, still inactive ...
How to put the note 8 in single sim and recover imei and then the network ???
there, I block ... if you have ideas I am taker, thank you all ...
amthium said:
Hello,
I'm french, excuse my langage...
I have 2 note 8, an N950F (single sim) and an N950FD (double sim). I specify immediately that the 2 have already worked and that I have only one sim (one being for me and the other as a gift for my wife lol)
- On the N950F, install via odin 3.14 of twrp 33.1.2, then hadesrom 12 then magisk 20.4 => everything is ok
- Purchase of the N950FD, hassle with installing twrp because I had to put my sim in it to change the time and have access to the usb options, in short, it works, then same as hades and magisk => everything is ok
I have well customized the N950FD, I made a full save (all partitions) with twrp and I said to myself I do a full install on the N950F ...
At the time I did not watch out ...
I calmly use the N950FD and then, I still hack the N950F, I install other custom roms to see, lineage 17, etc etc and all that I do it without sim, with the dex dock connected in ethernet, in me saying that when I'm done, my wife will just put her sim there ...
And then something bothers me, it's a small prohibition logo at the top left instead of the network. I tell myself that this is normal because I did not put a sim, so I take that of my N950FD and there bah it is not recognized ...
I do not panic, I tell myself that I made a false manipulation, I wipe, I reinstall hadesrom and same concern, I take another custom rom and same concern ... I redo a full install with twrp and same concern .. .
I take a stock rom (the last, then the first, always in 4 files either with the csc or with the home-csc), I flash with odin 3.14 and 3.13 and always the same problems, the rom remains blocked on the screen samsung, the first with "samsung note 8 powered by android". So I tried the last rom with 3.14 and 3.13 then the first and still the same problem, it does not start (I waited 5 minutes roughly) despite the wipes ...
Since I no longer have twrp, I reflash, it works, I tell myself that the custom was still installed and I reflash via twrp hades (I tried the stock rom file but it didn't work) and again same concern, the sim is not recognized ...
I try the flash of the hades kernel, it works but the sim is still not recognized ...
When I go to the phone * # 06 # I do not have imei, but a black screen, when I go to parameter / connection / sim card manager => black screen with the message "com-android-phone does not respond" ...
I looked a little on the net, but nothing conclusive, I specify that all my files come from XDA but that given my English I prefer to try to find an answer in French ...
I do not have a backup of the N950F it would have been too simple, I tried another sim than mine but ditto it is not recognized and before making a tablet I would like to try everything to recover it. ..
It would seem that flashing a stock rom solves the problem ... But as said above, my phone remains stuck on the samsung logo despite the wipes
I still tried other things like just flashing parts of a stock rom but I still have the same problem ...
I also tried the flash of a stock with the extra pit and the nand erase and distribution options ... and similar, no start ...
I even reinstalled twrp after a stock, save it, "mix" it with another backup I had (efs and modem from the stock and the rest of the custom) but then again, it doesn't work, such reboots well but still no network access and no recognized sim card ...
Finally, I looked at chimera tool, but no tutorial in French so no way to see how it works or if it will meet my need ... taking an exclusive samsung license on chimera does not cause me any concern IF it allows me to do other things than what I have already tried ...
I also looked at the prog to change the imei because there is nothing left, not even 0, no no, a black page just like when I go to the sim card settings, I have a black page. ..
I also flashed several custom roms from different countries but it didn't work ...
By cons I observed that I had the location for 2 sim, still inactive ...
How to put the note 8 in single sim and recover imei and then the network ???
there, I block ... if you have ideas I am taker, thank you all ...
Click to expand...
Click to collapse
If you didn't take a backup of your /efs folder which is where all of the phones important information is stored such as your IMEI then you are screwed because you can't flash any other phones EFS FOLDER.. However if you have a backup efs folder, restore it.
the concern is that I do not have a backup of the efs file ...
is it possible to put an efs file of another note 8 n950f and where to find this file on the net?
amthium said:
the concern is that I do not have a backup of the efs file ...
is it possible to put an efs file of another note 8 n950f and where to find this file on the net?
Click to expand...
Click to collapse
MrMike has already answered this, you can't share or use any other EFS.
The fact you can flash a custom rom and it will boot tells me you don't have a hardware issue, try flashing stock again as this can sometimes fix the EFS file, it has done for me in the past and a few others users. Although I can't tell you why you get stuck after flashing stock, this is the best way for you to hopefully resolve your issue as you don't have a EFS backup.
Except by flashing a stock, is there a way to restore the n950f to factory condition?
because with odin, if I flash the last stock, it does not start even if I make the wipes and if I try an old stock, odin blocks ...
can the chimera program allow me to find an original n950f?
amthium said:
Except by flashing a stock, is there a way to restore the n950f to factory condition?
because with odin, if I flash the last stock, it does not start even if I make the wipes and if I try an old stock, odin blocks ...
can the chimera program allow me to find an original n950f?
Click to expand...
Click to collapse
Not that I am aware of, I am only aware of restoring by flashing stock with Odin or by using Samsung smartswitch.
You can't flash older filmware than what is already on the phone, that is why Odin is blocking that, but when you flash the latest filmware does Odin give you the green pass?
I am not familiar with the Chimera program so can't speak on that.
Yes with odin I have the green pass, but then the note 8 does not start, it remains blocked on the logo, even if I do the wipe ...
I even tried to save right after with twrp and recover the efs but it does not work ...
If I find a broken Note 8 can I recover the efs file by saving it and then putting it on my own?
hainguyenthao said:
Device will not boot while there is an error in efs partition so u need to fix it first i have same device and i can help you to boot it
Click to expand...
Click to collapse
Thanks for your help, how to start it in stock rom?
I specify that it starts in custom rom ...
the first photo is before the installation of the stock rom with odin, the second is at the end of the installation (odin ok, pass in green), the third is after the restart which has not worked (blocking on samsung note 8)
hainguyenthao said:
Sorry error when loading images 404 Not Found upload it again or send it to my email
Click to expand...
Click to collapse
Could you please explain to us all in here how you're going to fix his /efs folder when he never made a backup of it.. Where are you planning on getting him an /efs folder that held all of his phone's information when he accidentally deleted it?
hainguyenthao said:
By root device and download Root Explorer, browse to the efs folder the delete everything EXCEPT the 'FactoryApp' and 'prov_data' folders it should restore IMEI
Click to expand...
Click to collapse
I gave this a shot but it didn't work for me.
Related
Hi all, I have messed up my Galaxy Tab GT-P1000 (Aus-Optus-CDMA) trying to flash. I managed to get it going on the following FROYO.XXJME Version 2.2 Kernel 2.6.32.9 rootatSEI-28 #1
Unfortunately I did not do a full backup!
My problem is now,
1/ No imei shown
2/ No serial number shown
3/ Not recognize my sim card
4/ Tab reboots regularly
Have done the factory reset however I am not sure if due to my flashing is it the original rom?
I have the imei written but cannot get the Tab to find it, thus cannot connect to Kies to get the samsung updates which would fix things, "I think".
Can anyone help
Thanks
DanTanBjAj said:
Hi all, I have messed up my Galaxy Tab GT-P1000 (Aus-Optus-CDMA) trying to flash. I managed to get it going on the following FROYO.XXJME Version 2.2 Kernel 2.6.32.9 rootatSEI-28 #1
Unfortunately I did not do a full backup!
My problem is now,
1/ No imei shown
2/ No serial number shown
3/ Not recognize my sim card
4/ Tab reboots regularly
Have done the factory reset however I am not sure if due to my flashing is it the original rom?
I have the imei written but cannot get the Tab to find it, thus cannot connect to Kies to get the samsung updates which would fix things, "I think".
Can anyone help
Thanks
Click to expand...
Click to collapse
Did you flash with ODIN?
Did you get an error message?
Have you tried re-flashing to a stock ROM?
You should read through the following thread before flashing anything else
http://forum.xda-developers.com/showthread.php?t=888071&highlight=no+imei+after+flash
And you are correct in assuming that a factory reset would only re flash the ROM you "replaced" your stock ROM with.
Also remember that using the SEARCH button usually will get you a lot more answers than just waiting on a reply here.
Did you unlock the tab first, no network lock, no sim lock... If you didn't this may explain whats happened. Don't know how you're gonna fix though....
Your Gtab is also NOT a CDMA tab, its GSM as you use a sim card... You may have bricked it if you flashed a CDMA rom.... Lucky if it starts up at all...
You need to tell us more info, what rom you flashed, how you flashed it - ODIN, Heimdall , Kies or just by pure magic. Then you might get more help....
the /efs folder contains all information/numbers about your gt including IME, mac address, bluetooth,etc.. It may have been deleted yet there should be a bak file inside the folder. since you are able to boot as you mentioned then you can still go into download mode and reflash a ROM?
Hi "theREDlegion" & thanks for your time.
Yes I did flash with Odin.
I got a red FAIL in Odin & an error message, trying to remember what it said exactly.
I am not sure which is the correct ROM to use for me here in Australia, CSC file & Pit etc, I'm kinda new to this stuff.......as you guessed!
I rooted the Tab with z4root, then used the repair nv_data to unlock the network which was succesful, so it said by entering the code.
So will the "Gingerbread" ROM work on my Tab?
I tried P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar which failed.
Thanks again.
Hi ultramag69, appreciate your help.
I was installing a game when my Tab froze. No matter what I did I could not get it to respond. This is why I thought lets try & install Gingerbread. I managed to get it connected to the PC, however I am not sure if I did as you said "sim unlock". I did the network unlock. My Tab runs okay now but will loop boot when idol for 30 sec. I still whish to do Gingerbread if it is possible, or "overcome"
Thanks again.
Hi bongski55, thanks for your assisstance.
I have the backup of the efs & the files in it are dated 27/10/2010 which would indicate they are the originals. I have replaced the new efs files with these but still no change.
Not sure which file is the imei info though.
Here is my plan,
1/ Do factory reset - this will allow me to reroot
2/ Root the Tab & unlock network, learn how to unlock sim?
3/ Remove SD & SIM cards.
4/ Use Odin to flash with Gingerbread, I think I have the right ROM!
Wot u think!!!!!!!!!
Is your bootloader safe? Do you know what your original firmware version was ?
edit for my english: is "was" at the good place in the second sentence?
You've tried chainfire's safe rom, have you checked out the overcome thread, there's a safe rom you can install through ODIN there too... Might work. Also, do a search for Telstra rom, might take back to stock Froyo but with all the Telstra bloatware, I started on this.
After you take back to Froyo stock you can try again for GB. Can't say if this will work though as you have an Optus tab, mine was Telstra from the start...
Good luck...
Without restoring the efs folder CORRECTLY. All your efforts are futile. Follow this thread to restore /efs folder: http://forum.xda-developers.com/showthread.php?t=859914. Reboot your phone, Charge it and try flashing a stock ROM.
Some very helpful information has been posted here, thanks to the very helpful members of xda.
If I was in your shoes I would do the following:
1) Follow the link provided by DarkPal in post 10, complete the steps necessary to restore the efs folder.
2) Follow the link I provided in post 2 and confirm your bootloaders and take necessary actions to patch if necessary.
3) Your device (on Optus) should be WCDMA/GSM. I would go over the OVERCOME thread and follow instructions on flashing a stock safe rom and attempt to flash the OVERCOME rom. It is important to follow the instructions step by step for a successful flash. The OVERCOME guide is very detailed, if you follow it correctly you should not have any issues with the flash.
Do post back your results and good luck.
DarkPal said:
Without restoring the efs folder CORRECTLY. All your efforts are futile. Follow this thread to restore /efs folder: http://forum.xda-developers.com/showthread.php?t=859914. Reboot your phone, Charge it and try flashing a stock ROM.
Click to expand...
Click to collapse
Thanks for your help so far,
I have been able to find the backup of my efs/ which was created during unlock process.
Thank god.........I have now done this, patched bootloader.
1/ Used Overcome safe rom & flashed
2/ Flashed to Overcome "Jupiter" v3.3.0 & changed file system to ext4
3/ restored efs/
4/ My imei is now back to original....Yippee....also is my serial number.
Now when I boot it gives me full bars of service & Yes Optus on the screen..Great!
But I still canNOT connect. My Wifi works fine.
I notice my IMEI SV is now 05 but was originally 01.
I am not sure how to see what csc I have & don't know if it matters?
Any suggestions....
Cheers
Google "optus apn settings" and check yours (settings, wireless network, apn).
Check if wireless mode is auto.
What is your baseband (modem version)?
Because you see optus on your screen, your voice service is fine, but no data connection means your apn values are incorrect or missing.
theREDlegion said:
Some very helpful information has been posted here, thanks to the very helpful members of xda.
If I was in your shoes I would do the following:
1) Follow the link provided by DarkPal in post 10, complete the steps necessary to restore the efs folder.
2) Follow the link I provided in post 2 and confirm your bootloaders and take necessary actions to patch if necessary.
3) Your device (on Optus) should be WCDMA/GSM. I would go over the OVERCOME thread and follow instructions on flashing a stock safe rom and attempt to flash the OVERCOME rom. It is important to follow the instructions step by step for a successful flash. The OVERCOME guide is very detailed, if you follow it correctly you should not have any issues with the flash.
Do post back your results and good luck.
Click to expand...
Click to collapse
Good morning all, well I would like to thank everyone on this forum, particularly those who have promptly responded to my questions.
I am glad to say that after 3 days of stress I have finally got my Galaxy Tab back on the Optus Australia internet service, I had to change the APN from Optus (Internet) to Optus (connectcap) in the Access Point Names & also at the bottom of those settings I had to select Internet. The connectcap option is not there by default, you have to add a new APN & choose these settings. My sim card is a data plan only.
So I now have my Tab running Overcome Jupiter, thanks guys, love your work, on the ext4 file system and already it is noticably faster.
Now......probably a good time to do a proper backup......yep I'm learning!
So thanks again everyone.
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
I had a similar SIM card issue when I tried to activate the 1700MHz band in Service mode (for fun). Wipes and stuff didn't solve anything. The way to revert it for me was flashing a full stock Samsung firmware in Odin.
Can you provide more details on how you did this?
Where does one get a full stock sammy note firmware?
Are there some good instructions on this?
I have flashed my SGT via odin several times. Same odin? Same process?
In the development section you will find some versions.
The key for me was flashing a new Modem (Radio/base band) image via Odin I think. I changed Kernels and ROM's but only flashing a ROM including the Modem got rid of my SIM issue. Not sure because in the end I flashed a full N7000OXAKJ1 firmware in Odin from here:
http://forum.xda-developers.com/showthread.php?t=1310513
It did the trick, though the tread is dead. I think any ROM including Modem might help, I currently running the 2.3.6 N7000ZSKK1 firmware and it is great, also included a Modem.
http://forum.xda-developers.com/showthread.php?t=1342797
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
when this happened to me, also due to turning on 1700, I was able to reset my phone by doing a factory reset. Unless your modem.bin is corrupted, you should not have flash a new rom.
- frank.
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
fwelland said:
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
Click to expand...
Click to collapse
Here is Chodthewacko posted about it:
http://forum.xda-developers.com/showthread.php?t=1335920
Factory reset and toggle band settings seems to have worked for him. I got frustrated and Odin flashed everything, that worked for me.
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
OMG I have the EXACT same issue as you, and I got mine from NEGRI also! It was working perfectly until last night --- all of a sudden I got that circle and I've been trying to fix it since then! Please keep me posted if you find a solution, I was going to try and contact Negri tomorrow for an RMA.
still nothing.
I did a root. No changes...
I did a rom flash of kk1 ... no changes....
I was trying to reflash the modem with KJ6 modem....but have a signature failed problem...
now what???
I solved my issue by a combo of those steps.
I did full flash in Odin of jk1. When I rebooted that didn't solve things so I wanted to flash the other recommendation, kk the Chinese rom.
Upon entering recovery I noticed I lost 2e and was on 3e. So I had to download chainfire's rooted jk1 kernel and do that zerg rush to get root. It was while I was doing that that suddenly my similar got recognized. By the time it finished installing the rooter kernel I had full reception again. I flashed kk just for good measure and its been smooth since. Hope it works for you too and I'd love to know what the heck broke it in the first place??
Sent from my GT-N7000 using XDA App
hi fwelland, it's hk1981...so you tried the rom flash and it didn't work?
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
fwelland said:
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
Click to expand...
Click to collapse
I had that problem too, it doesn't detect that CSC and then goes ahead and applies something. Check to see if you are in 3e recovery, I think you are after having flashed vanilla JK1.
Re-flash Chainfire's rooted kernal for your appropriate version and then go back into recovery and it should be 3e and you can flash thru CWM then.
Also note; each time I flashed, I also wiped data/cache/davlik just to be sure.
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
fwelland said:
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
Click to expand...
Click to collapse
My rough guess is that the phone has a list of 'valid service menu options', and it cross references it with what is on the SIM card.
Once the phone decides it's not going to read your sim card, the service menu is blank. This is a real headache.
That's why once I set the 1700+2100 combo, and my phone boycotted my sim, I wasn't able to set it back.
That's really dumb, imho, to have a one way toggle like that. I'm fine for settings to enable/disable other settings, but for a setting to disable itself? ugh.
I would really like to know what's going on. I was planning on switching to AT&T before my next trip (which is soon) but I can't risk my phone glitching out like that during the trip.
Actually, the ROM is on my SD card so I guess it wouldn't be THAT horrible, but it's certainly not something I want to do. Perhaps we just need a way to flash back the modem.bin, assuming it's corrupted.
- Frank
Sorry typo on my part. You are in 3e recovery because of that base flash, now you need 2e recovery which you can get via chainfire's rooted kernel. His installation procedure runs a batch file that uses that zerg rush exploit which I gather is partially from gingerbreak. It was during this procedure that my baseband suddenly came back, my sim card finally detected.
Once that was done, I entered 2e cwm with volume up,power,middle button and did erase of data,cache,davlik and then flashed kk rom via zip file.
Sent from my GT-N7000 using XDA App
fwelland said:
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
Click to expand...
Click to collapse
For me flashing all partitions via Odin worked (no pit file or repartition). Tried all sort of stuff from recovery first with no result.
I don't know what partition flash from Odin did the trick, but you could try Odin flashing a Modem separately and check if that works. If not try the rest?
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
fwelland said:
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
Click to expand...
Click to collapse
Oh when you flashed jk1 I assumed you did it the old way via Odin and the multiple files. That's how I did it and you're right, that may be what fixed it as when I used to brick my sgs and sgs2, it was always a full Odin flash of stock that brought it back from the dead
To flash in Odin put your phone in download mode. Fire up Odin. In csc point to csc file. In phone section point to modem and for PDA you point to the code file. Don't put anything for pit or bootloader and unchecked the repartition toggle.
Connect your phone and wait for Odin to detect it and show yellow in the status window. Press start and you're good to go. Hope this does it!
Sent from my GT-N7000 using XDA App
heya,
i have done this to about a dozen phones (samsung galaxy s gt-i9000 and gt-i9000t) and i have never had this happen before.
last night i was given a gt-i9000t to debrand (telstra) and update from 2.2.
so as normal i put the cyanogenmod 7 (update-cm-7.1.0-GalaxyS-signed.zip) on internal memory, use odin3 1.85 to flash hardcore-seedmod.tar to the phone.
restart in recovery mode and then select install zip, and select the update-cm-7.1.0-GalaxyS-signed.zip and it installs it, clear the partitions and then the cache etc, restart the phone, and the cyanogenmod 7 installs.
bobs ya uncle its rooted, debranded, updated, and made epic in one swoop.
and uptil last night, never had a hickup,
last night i did what i normally do, back everything up (contacts pics etc)
and then did what i listed above, and now the imei has been cleared to 000000000000000 instead of it being XXX112040608XXX.
since i have never had a problem with it in the past i never did a backup of the system files.
is there anyway i can edit a file to put this imei back into the phone.
also i have flashed it with a few roms from samfirmwares.com and the imei is still all 0's.
thanks
There is a service offered at forum.samdroid.net . It costs 10€ . He will rewrite corrupted file.
all good
i have been able to restore the firmware to a default samsung imei code, and now the phone is working again.
[X] please close thread [X]
massiveoni said:
all good
i have been able to restore the firmware to a default samsung imei code, and now the phone is working again.
[X] please close thread [X]
Click to expand...
Click to collapse
Clear your first post, it's not good posting your IMEI on the net
Hello everyone.
I installed CWM 5.0.2.6 and then Cyanogen mod 9 succesfully. Then I changed it to "MIUI TOCAi 0.1.4" and it was working fine although it could not find my network. I tried searching manually but without success (it kept on showing up that it's not able to register to the network im choosing and that i should try again later.) It had simlock before so I tryed to unlock it using this thread "http://forum.xda-developers.com/showthread.php?t=1204705". I got the code etc but I didnt know where to type it in. I turned the phone off and on hoping that the menu with this code request would pop out but it didnt so I replaced the sim card with another one. It still didnt pop out so I replaced it with the previous one and the phone bricked.
Im not able to get to CWM or to the system at all. Im only able to get to DL mode. I tried to unbrick it using this method "http://forum.xda-developers.com/showthread.php?t=1071970" and few similar ones. I used multi and single package but without success.
The simlock was for "3" network. Tryed O2 and Vodafone simcards.
Is there any way to unbrick it without going to the service?
I'm going to post youtube links to show you how it looks in just a few minutes.
Part 1 : http://www.youtube.com/watch?v=oNln0KJQ-0o&feature=youtu.be
Part 2 : http://www.youtube.com/watch?v=urRAhOq0OCw&feature=youtu.be
Part 3 : http://www.youtube.com/watch?v=EU-EshQdj7E&feature=youtu.be
Looks like your efs partition (either stl5 or bml5) got corrupted. This cannot be fixed by flashing roms or stock roms, since its a sepparate partition. Network Unlocking the ace might result in a brick specially if not done from stock firmware.
i bricked my gio after network unlock too, it was due to the efs partition being messed up, i couldnt get it to boot normally or recovery (screen flashes then dies) but download works, and odin didnt solve anything, so i sent it in to samsung and got a new gio
to sum it up, you now have a nice paperweight
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Access to the original/official firmware for SM-G900F would be extremely helpful for me as well.
I'm running LOS 16 with pico GApps very happily on my S5, however I have mobile data connectivity issues. Data connects and disconnects at random; this is device-dependent (swapping the SIM into other devices gives fully functional data connectivity).
My baseband is G900FXXU1BOA3; I believe updating the modem might fix this?
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
Fox, you may download the official firmware at https://samsung-firmware.org/model/SM-G900F/
Select your region to get the right ***.md5.tar file to flah via Odin latest.
This will reset your handheld to out of box - original recovery reinstalled - you must reflash it also via Odin if you want to go back to custom Rom..
Good luck
.
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
kwajongen said:
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
Click to expand...
Click to collapse
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Captain Kangaroo said:
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Click to expand...
Click to collapse
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
kwajongen said:
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
Click to expand...
Click to collapse
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
2. Basically you can search websites that had official Samsung stock firmware. Search your region of your device and (IMPORTANT!) your model, in your case, is G900F. (Wow same as mine but different region, Snapdragon rocks).
3. To your network problem, I think you need to wait. There is no other option.
Thanks!
Edit: https://forum.xda-developers.com/showthread.php?t=2715487
XDA forums has one. Tip: if your region isn't there, the replies have all the filmwares you can have.
Captain Kangaroo said:
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
Click to expand...
Click to collapse
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
OfficialJohnGL4 said:
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
Click to expand...
Click to collapse
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
kwajongen said:
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
Click to expand...
Click to collapse
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
kwajongen said:
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
Click to expand...
Click to collapse
When it said that you go back to stock one to fix it. Then want if it is not stock? The message is still there. Its normal if you want to install a custom ROM other than the stock one. I reinstall the stock and install custom ROM again once. It still happened.
I don't know how to remove the text but still have a custom ROM tho.
As for the SD card message, I encountered times before. Maybe you need to format using the computer.
Captain Kangaroo said:
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
Click to expand...
Click to collapse
When I reflash the stock ROM TWRP is still there. However no "Set warranty: kernel" appeared. Maybe its just when you install a custom ROM or something, I don't know.
OK guys,
Lineage 16 is installed, everything went smoothly, however when I connect the USB, the phone just shows as 'SM-G900F' on my W10 PC and cannot be expanded, basically no Phone and SD Card folders.
I can see them in the phone no problem, but once I connect it, I am not prompted with the usual message on what I want to do, like file transfer etc. and on the left menu appears only the model of the phone.
I had no issues when I flashed the original firmware, so it must be related to Lineage.
I also installed the Android USB drivers, but no go.
Changing the USB Preferences, to PTP or File Transfer only allows me to see the phone, no SD.
I also tried a new SD, no success.
I am stuck again... Jeez it takes days to get this stuff to work, you do one step ahead and another back
Ideas?
Alex
Anyone?
Shall I ask the question in the Lineage section?
'Set warranty :kernel' means you are running a custom kernel. Any modified boot.IMG can cause this message. It doesn't mean you need to use stock room. This appears even in stock rom with magisk or SuperSU.