Hello guys,
Recently I bricked my Oneplus 2 by trying to flash a custom Kernel. That would all be no problem, however my PC doesn't recognize my phone. Tried multiple USB ports (multiple PCs) and got the official oneplus drivers installed, still no connection (tested on Windows and Linux) . That got me believing that my USB port was broken (charging still working), so I replaced the USB module however still not working. (Could it be the cable?)
The current state is that I can boot into recovery (TWRP) and fastboot, however trying to boot normally just shows me the android logo forever.
So well my questions are:
1. What could possible be broken at my phone, that the USB connection is not working. (It worked before)
2. Is there any way to push a rom towards my phone without using a USB connection? So without adb?
Thanks a lot in advance!
EDIT: It was the cable ... I think the data pin broke somehow ... and me stupid as a was replaced the USB module 2 times ... Well transferring CarbonOS right now and will flash real so so thread closed!
Related
Hey all,
I've got a problem related to my Micro USB port (at least I think it is).
[Long story]
I've got a very annoying issue right now. Today I flashed Team ICSSGS RC4.1. Later when I connected my Galaxy S to my PC with the usb cable, no recharging icon appeared and my pc did not react to the connection at all.
Thinking it was a bug in RC4.1 (as OneCosmic RC 2.3 had the mass storage issue) I searched the ICSSGS thread, but not a single issue about mass storage mode was posted. So I flashed Devil kernel, hoping to fix it, but it didn't. Reflashed RC4.1, but problem still persisted.
I went radical and recovered a nandroid backup in CWM of ICSSGS RC3.0 (the one is was running earlier today), but somehow the recovery failed and left me with a semi-bricked phone. (Actually the 2nd time in a row when recovery semi-bricked my phone.)
Only download mode works. Recovery and normal boot bootloop.
[/Long story]
In short:
When connecting to PC to flash with Odin:
-At first the PC did not even notice the phone being connected through USB. Nothing happens.
-After blowing in the contacts of the Micro USB port, PC recognizes connection, but gives "Unknown device" error upon connecting. Reinstalling Samsung drivers does not work at all. Tested on laptop and home PC.
-Somehow I always have to blow into the Micro USB port to create contact and to get the PC to recognize a connection. But that's about it. "Unknown device" every time.
-When I plug in wall charger, the big battery icon appears, but stays grey all the time and after half a minute the phone boots, starting the bootloop.
Could it be that my Micro USB port is broken?
Any solution for this?
Thanks in advance!
I feel so stupid for recovering that nandroid backup. Otherwise my phone would still be working...
you will need the nexus drivers for your comp found here : w w w.multiupload.co.uk/BUCFT8M42 as your samsung drivers are no use now.
Thanks for your advice: Going to test it right away.
Unfortunately your link does not work for me.
I had the same problem but replacing the cable solved it.
Sorry for the duff link http://www.multiupload.co.uk/BUCFT8M42N
japperrrr said:
I had the same problem but replacing the cable solved it.
Click to expand...
Click to collapse
Tested this morning with someone else's cable, still the same issue.
Tried the Nexus driver, but still nothing. Also having troubles again to let the usb connection register. It connected after cleaning it, but now it does not seem to connect at all.
Could it be that the phone is completely busted and therefor breaks usb connection?
Haven't heard such a story yet, but is it possible?
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Same Issue cant fix
Hey guys im glad to see others are having the same issue but i cant seem to fix mine.
Assume im an idiot and ive missed something out but ill explain my situation....
Galaxy i9000 - windows 7 32bit - put ics on it a few weeks back following a guide on youtube (had never used odin or anything like that before) got it working but now have no usb comm options in the ics settings. now when i plug the usb (when it does detect at all) it says driver havent worked - device manager shows unknown device - i try update the driver and it says the best driver is already installed.
Im completely stuck and want to revert back to gingerbread so i can use my usb functions again. If i can get odin to see my phone again ill be relieved.
Any ideas?
Cheers guys! Seán.
subcultural said:
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Click to expand...
Click to collapse
dieselno7 said:
Any ideas?
Cheers guys! Seán.
Click to expand...
Click to collapse
USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
But most of all, check your usb cable and try switching to another USB port after rebooting your PC
Hi guys, hoping someone can help ?
As you see from the title, my HTC One fails to connect to the computer, Here's what ive done to try and remedie the problem.
Removed and clean installed latest HTC Sync and drivers
removed SDK and ADB, updated
rebooted phone
switched on and off
tried several roms
tried 3 different usb cables
tried 5 different usb ports
tried 2 different PC's
My phone sounds like it tries to connect to the pc - with the typical windows noise, then disconnects almost immediaetly, then reconnects then just keeps doing that, my pc comes up with installing drivers, then fails to instal drivers, saying phone not connected, once ive tried this once the phone need to be rebooted before it will attemp to connect to the pc again ---- but fails again
software wise the phone runs perfectly , other than the usb connection problem and charge problem with pc.
The phone charges first time, every time with all my usb cables and htc chargers
im trying to downgrade or reflash hboot 1.55000, just incase this has somehow went corrupt on the usb commands side, but without adb ect it seems almost impossible,
have any of you guys experienced anything like this or could offer solid ideas on how to re-flash hboot from the file located on my phone ???
all help appreciated
running ardh 13.4/22.0, hboot 1.55, cid = supercid, unlocked, s-off
I would simply go back to stock and return via shop in uk - to see if i could get a replacement, but getting there seems impossible - if i can simply get the pc usb problem sorted - all will be fine
dayze0 said:
Hi guys, hoping someone can help ?
As you see from the title, my HTC One fails to connect to the computer, Here's what ive done to try and remedie the problem.
Removed and clean installed latest HTC Sync and drivers
removed SDK and ADB, updated
rebooted phone
switched on and off
tried several roms
tried 3 different usb cables
tried 5 different usb ports
tried 2 different PC's
My phone sounds like it tries to connect to the pc - with the typical windows noise, then disconnects almost immediaetly, then reconnects then just keeps doing that, my pc comes up with installing drivers, then fails to instal drivers, saying phone not connected, once ive tried this once the phone need to be rebooted before it will attemp to connect to the pc again ---- but fails again
software wise the phone runs perfectly , other than the usb connection problem and charge problem with pc.
The phone charges first time, every time with all my usb cables and htc chargers
im trying to downgrade or reflash hboot 1.55000, just incase this has somehow went corrupt on the usb commands side, but without adb ect it seems almost impossible,
have any of you guys experienced anything like this or could offer solid ideas on how to re-flash hboot from the file located on my phone ???
all help appreciated
running ardh 13.4/22.0, hboot 1.55, cid = supercid, unlocked, s-off
I would simply go back to stock and return via shop in uk - to see if i could get a replacement, but getting there seems impossible - if i can simply get the pc usb problem sorted - all will be fine
Click to expand...
Click to collapse
Are the chargers working fine? or are they giving you intermittent charge/no-charge cycles as well? in which case it could be your USB socket is damaged or dirty, try cleaning it with a compressed air tank (or whatever it's called )
Are you also facing the problem in bootloader mode (ie fastboot)?
hmm, will give the usb socket on my phone a clean. Im charging completley fine with chargers and usb cables from mains, when i install htc sync(latest) it installs no problems, then i plug phone into pc, the usb connected appears on phone and then disappears almost imediaetly, the pc sees ive plugged something in and straight away tries to instal drivers - but then comes up with drivers were no installed correctly, also then the phone fails to charge from pc, if i reboot phone - and plug in it will run through the same install cycle again , as described above., basically all drivers fail to install when i plug phone in, its like the phone connects then instantly disconnects.
I ll clean port and post back, could make a difference if a pin has a high resistance contact , thx for info will give it a go
HI I know with the title of my thread its a nooby ques but my situation is different,
Since few days my phone was charging but not connecting to pc
as I know its a port issue because tried it on 3 pc's
Before I thought it's and rom issue I flash a different rom and got bootloop
Now I cant connect to pc no rom in sd
How do I flash it? I can go to twrp but I cant transfer from adb because port isnot working
I have a ques that really my por is damaged? Its only the isse?
because I cant get net port at my place and the shop man told me it could b an issue of motherboard too?
Can someone plz help me I am afraid and I cant afford motherboard for now..
:crying::crying::crying:
As I said I can chrge it so is their a way to temporary get rid of bootloop?
Thank You
Plzhelp
Are you using the original USB cable? There are some usb cable that will only provide power and no data connection. So make sure you have a data cable first. Then check you have the latest HTC drivers installed on your computer, make sure you don't have HTC Sync installed, that you are using a USB 2.0 port directly at the back of your PC (no external hub). What is your TWRP version, your Windows version and your Bootloader version?
Yes I know I have tried this all,
Have tried all recovery is twrp 2.8.7.0
Nd usb is original I use the same for my Xperia z2 for flashing...
Drivers are installed with signature enforcement disables on 8.1 windows
But all was working fine suddenly I got this issue..
What could be done
What is your hboot version
Can you get fastboot connectivity when in bootloader?
Can you get adb connectivity when in custom recovery or when booted in the ROM with USB debugging turned on?
Also worth mentioning that you won't get connectivity if your phone is on the lock screen, you must unlock the screen at least once when connected to the computer.
Otherwise if its the usb port, it can easily be replaced, you only need to remove the cover you then have access to the small usb/front mic board and can replace it without further dismantling. The usb board is pretty cheap, you can find it on amazon, ebay and probably any other website of that kind.
http://www.cafr.ebay.ca/itm/Chargin...682235?hash=item2c8fa787fb:g:URIAAOSwY45USvAs
https://www.youtube.com/watch?v=jaYzQHSGv54
I recently tried to install PureNexus 7.1.2 along with the latest version of GApps 20170610. There seems to be some sort of conflict with that version of Google Play Services that prevents my device from completing setup. Without completing setup, I'm not able to do anything with the phone.
In an attempt to save myself, I want to go back to the older version of the ROM and GApps that worked, but first they need downloaded. In the past, I could go into TWRP and mount my device to my PC and transfer the files I needed to install. Now, Windows is showing my device as Unknown USB Device (Device Descriptor Request Failed). Going through every thread I could find about updating drivers, etc, it still does not work. This used to work just fine in the past on the same PC (Windows 10).
Both adb and fastboot don't seem to work either. There is no device found. When I boot the phone into Bootloader mode and plug in the USB cable, it shows Transfer Mode: USB Connected but running fastboot on the PC still can't find anything.
I am not sure how else to go about getting the necessary files on the device to flash them.
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
tristanlee85 said:
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
Click to expand...
Click to collapse
It could be just a dirty usb port.
Where's answers
ktmom said:
It could be just a dirty usb port.
Click to expand...
Click to collapse
Unfortunately I do not think that is the case. I have used a number of different means to clean the connection with rubbing alcohol and electrical terminal cleaner, small utensils to get in there and clean the contacts, but no luck. I am to the point now where the phone won't boot up the OS. I can get into TWRP and the Bootloader, but from there I have no way to transfer files to the device.
Bluetooth was my option before, but that is when the device would boot. There's no way to enable BT from recovery right? I am trying to reset the phone back to stock to trade it in to Google, but I am afraid I am going to be out $100 since it seems to be as good as dead now.
hey guys. first i'' say that i own mi9, works great - connecting to my pc and laptop, adb, and fastboot devices works excellent .
NOW - to the problem.
my friend gave me his mi9, totally stock, miui12 global. to backup his internal card and wipe clean and flash eu rom with root.
easy job i said.... hmmm..is it ??
when connecting the mi9 to my pc (tries several cables, originals, blitzwolf, front socket, rear socket, laptop) nothing..
tried to uninstall the driver and manually install,
tries enabling usb debugging and connect it via adb.. nothing (waiting for device)
same goes in bootloader.
what the hell ?? lol..
any one have any ideas ??
thanks!
Same issue. Stuck in TWRP...what to do?