Related
Hello,
I currently have the following:
Phone: OnePlus 3T A3003
Recovery: TWRP 3.1.1-x | blu_spark v37
Rom: RR-N-v5.8.3-20170603-oneplus3-official
I installed all of this after hours of googling last year. I now want to upgrade but I am not finding many helping guides are upgrading (rather than installing from scratch).
I downloaded RR-O-v6.1.0-20180627-oneplus3-official and tried to install it via TWRP (after backing up and wiping some stuff). But I got the an error stating something along the lines of "this rom is for oneplus3/t" and your device is "". Googling lead me to believe I needed to update my recovery. So I downloaded TWRP-3.2.2-0oneplus3.img but I really have no idea if I should be installing this? Last time I installed the blu_spark variant but I have no idea why.
Anyway, my question is:
Given the above, please could someone give me a laymans guide to updating my Custom ROM and which things I should install and in which order.
Thank you!
Glendog1 said:
Hello,
I currently have the following:
Phone: OnePlus 3T A3003
Recovery: TWRP 3.1.1-x | blu_spark v37
Rom: RR-N-v5.8.3-20170603-oneplus3-official
I installed all of this after hours of googling last year. I now want to upgrade but I am not finding many helping guides are upgrading (rather than installing from scratch).
I downloaded RR-O-v6.1.0-20180627-oneplus3-official and tried to install it via TWRP (after backing up and wiping some stuff). But I got the an error stating something along the lines of "this rom is for oneplus3/t" and your device is "". Googling lead me to believe I needed to update my recovery. So I downloaded TWRP-3.2.2-0oneplus3.img but I really have no idea if I should be installing this? Last time I installed the blu_spark variant but I have no idea why.
Anyway, my question is:
Given the above, please could someone give me a laymans guide to updating my Custom ROM and which things I should install and in which order.
Thank you!
Click to expand...
Click to collapse
Clean Flash:
1) Latest Official TWRP (Can be done from within old TWRP)
2) Reboot Recovery to new TWRP
3) Wipe
4) Latest Firmware (OB29)
5) ROM
6) OpenGapps Arm64 8.1 Nano or Pico
7) Root Optional
Don't forget to Nandroid first, and it might be a good idea to remove any security measures on your current setup too. (Fingerprint/Pin/Pattern)
Queue up the zips for Firmware/ROM/Gapps and flash in that order together.
Thank you,
Some follow up questions:
* What should I be wiping during step 3.
* Should I install TWRP 3.2.2, does it matter that I currently have the blu_spark variant? (I don't even know what blu_spark means)
* I am just reading about firmware. I am assuming I need OB29 to work with RR-O-v6.1.0-20180627-oneplus3-official? Is that a simple process?
Glendog1 said:
Thank you,
Some follow up questions:
* What should I be wiping during step 3.
* Should I install TWRP 3.2.2, does it matter that I currently have the blu_spark variant? (I don't even know what blu_spark means)
* I am just reading about firmware. I am assuming I need OB29 to work with RR-O-v6.1.0-20180627-oneplus3-official? Is that a simple process?
Click to expand...
Click to collapse
Just follow the steps. The TWRP you download will be an .img file. In the TWRP Install menu press the button for Image to flash the .img file.
For step 3, from the Wipe menu just swipe to wipe.
DirkGently said:
Just follow the steps. The TWRP you download will be an .img file. In the TWRP Install menu press the button for Image to flash the .img file.
For step 3, from the Wipe menu just swipe to wipe.
Click to expand...
Click to collapse
Thank you, final question. I note you advised to remove security. I changed from 'Pin' to 'None' and gave me a warning about removing it which I agreed to. It still states my phone is encrypted however, and I still need to enter my PIN when restarting. Will this be a problem?
Thank you,
Glendog1 said:
Thank you, final question. I note you advised to remove security. I changed from 'Pin' to 'None' and gave me a warning about removing it which I agreed to. It still states my phone is encrypted however, and I still need to enter my PIN when restarting. Will this be a problem?
Thank you,
Click to expand...
Click to collapse
I believe removing your stored fingerprints removes the boot PIN. Don't stress if you can't do this, it's just an additional precaution.
DirkGently said:
I believe removing your stored fingerprints removes the boot PIN. Don't stress if you can't do this, it's just an additional precaution.
Click to expand...
Click to collapse
Pin/password and fingerprints are two different things. Fingerprints are just a convenient method of authenticating. Removing them does nothing for the actual security with is pin/password.
The reason for removing the lock screen password before taking a backup is that if you install a new ROM and set a password and then restore your older backup, you can't get past the lock screen password. So, remove the password before taking the backup and then you can restore it later and set a new password.
I find the better option is to not remove the password and then, if you need to restore the backup after having changed passwords, you can delete the passwords of the restored backup in TWRP from Advanced>Terminal with these commands:
Code:
cd /data/system
rm -f gatekeeper.* locksettings.*
Changing the pin/password to none doesn't wipe out the on-boot password. However, when setting up a new password and selecting to not set an on-boot password will remove the current on-boot password for some users, but not for others (it doesn't for me).
Sent from my OnePlus 3T using XDA Labs
Thanks guys.
I followed your instructions @DirkGently and it worked a charm.
What you recommend for rooting the device and is as simple as flashing a zip file like above?
Also, is the recovery on a separate partition? So if I mess around flashing firmware/rom/apps and mess up, I'll always be able to boot into the recovery partition and flash again?
Thanks,
Glendog1 said:
What you recommend for rooting the device and is as simple as flashing a zip file like above?
Click to expand...
Click to collapse
Magisk
Glendog1 said:
Also, is the recovery on a separate partition? So if I mess around flashing firmware/rom/apps and mess up, I'll always be able to boot into the recovery partition and flash again?
Click to expand...
Click to collapse
Yes and yes, but firmware may be tricky and messing up too much may render phone unusable. Messing with ROMs is fine though.
Thanks for the reply.
I note that on the Magisk page it states:
"If you plan to flash a custom kernel, flash it AFTER installing Magisk"
I have already installed a custom rom, will this be an issue?
Sorry for so many question. I get really nervous about this stuff!
Glendog1 said:
I have already installed a custom rom, will this be an issue?
Click to expand...
Click to collapse
That's ok of you asking questions, that's what this forum is about.
You should have got no problems if you're running a kernel shipped with custom ROM. Custom kernel is like EX, Mady's Xtended, Franco and so on.
Glendog1 said:
Thanks for the reply.
I note that on the Magisk page it states:
"If you plan to flash a custom kernel, flash it AFTER installing Magisk"
I have already installed a custom rom, will this be an issue?
Sorry for so many question. I get really nervous about this stuff!
Click to expand...
Click to collapse
You don't need to worry about Kernel stuff. RR already includes Caesium Kernel. You chose a good ROM by the way!
Here's a little information about Firmware. The OP3 and OP3T have unified builds. This means that in some cases the same Custom ROM can be used on both. There is some device specific software though so this has to be separated out and treated as independent from the ROM. This is what we refer to as Firmware. When Oneplus release new builds they include the updated Firmware in their Official ROM. If you look at the Firmware thread i linked you to, you'll see that kamilmirza takes the Firmware from the Official OOS builds and makes them available as flashable .zip files that we can use on Custom ROMs. Bookmark his Thread for future use.
There is no need to stress about always being on the latest Firmware for your Custom ROM, just ensure it is the Firmware intended for your device. The version you flashed earlier will probably do you for a while. At the same time, if you do always want to be on the latest, there's no reason not to. There's little to be gained by it though. If you're following the RR thread you'll probably see people mention it when the ROM requires a new Firmware. Again, don't stress about it.
As far as flashing Firmware, you can do it any time. You can do it before flashing an updated build of your ROM, or on it's own in a separate visit to Recovery. It's not particular either way. I would stick with the Open Beta Firmware, which people usually abbreviate to OBXX, i.e OB29. Just remember what you flashed so that you know which version you are using.
Now that you're rocking your Custom ROM you're next questions will be about updating it. This can be done easily and safely by Dirty Flashing. I've done dozens of updated builds since my last clean flash and everything has gone perfectly every single time.
Dirty Flash:
1) Download new ROM build (and Firmware if applicable) to Internal Storage.
2) Boot into Recovery
3) Nandroid Backup
4) From Install Menu, flash Firmware (if applicable), and ROM.
5) Wipe Dalvik & Cache when prompted. (BillGoss will tell you it's not necessary. It doesn't hurt either way, so up to you!)
6) Reboot phone.
For a Dirty Flash, you do not need to use the 'Wipe' Menu at all.
I always take a new Nandroid before flashing an updated build. I will have had a whole week on the previous build so i know i'm not backing up a bug and the backup will be as recent as possible if a problem occurs. Once i boot back into the phone i delete the old Backup. The new one is there if i need it. Always have that one recent Backup, just in case. As i've said, RR is great and i'm yet to run into a problem with it. From now on you can Dirty Flash the updated weekly builds with little to worry about and with a Backup to fall back to if anything goes wrong.
I don't mention Magisk because i don't use it, and i don't advise others use it. Unless you need Root access for something specific, don't bother. Half the threads on XDA are about problems with Magisk. Avoid the added complication if you can. Now this statement will trigger the Magisk fans, but nobody has ever had a bug or failure with something that they did not flash in the first place. Keep it as simple as possible.
I've been having loads of issues with installing Treble ROMs. Currently I'm on the PRA-LX1's most recent update with EMUI 8, (C432) and have only recently found out that Askuccio's TWRP is around. Previously I've been trying and trying with TWRPs like Haky86's which couldn't have even worked because it's built for EMUI 5, I've tried Pretoriano's for the P10 lite, as well as some other random one which is Chinese. Pretoriano's is always unable to mount my /storage/ or /system/ and therefore I can't wipe or flash anything properly, and the chinese one just placed me in a bootloop after flashing the Treble RR ROM.
I now have the Askuccio TWRP and I need to know before I try again - will I get a bootloop, or get in a mess all over again? I can't back anything up beforehand because of encryption and inability to root before switching to a custom ROM. The last times I've tried I've had to keep booting and messing around until eRecovery manages to reproduce itself from seemingly nothing and then redownloads my system firmware again.
Has anyone had proper success? Do you recommend any ROMs to use? I'd prefer RR, Lineage or Omni but at this point anything is fine. Thanks
I'm in the same boat as you. I have had many phones and rooted them all, but somehow the help on this forum lacks detail and consistency. I also have the TWRP installed but can't get any further down the line - where is the root? Can't install custom roms, can't get adaptive SD, just got unlocked bootloader and FWP!
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel
Hi everyone! I'm very much a newbie when it comes to custom ROM's, so apologies if this is a a dumb question...
I just managed to install the latest Pixel Experience ROM on my K20 Pro, from the stock Chinese ROM. Before installing it, I had to flash DFE. So, from my understanding, it is now blocking me from re-enabling encryption. I need to have encryption enabled for work email access, so is it possible to enable it somehow? I'm not worried about losing any data on the phone, but I would certainly prefer to use Pixel Experience than to go back to MIUI.
Per another forum thread I found, one member suggested to "reflash your vendor/firmware." Is that accurate? If so, how do I do that, and what would be the result?
shleepy said:
Hi everyone! I'm very much a newbie when it comes to custom ROM's, so apologies if this is a a dumb question...
I just managed to install the latest Pixel Experience ROM on my K20 Pro, from the stock Chinese ROM. Before installing it, I had to flash DFE. So, from my understanding, it is now blocking me from re-enabling encryption. I need to have encryption enabled for work email access, so is it possible to enable it somehow? I'm not worried about losing any data on the phone, but I would certainly prefer to use Pixel Experience than to go back to MIUI.
Per another forum thread I found, one member suggested to "reflash your vendor/firmware." Is that accurate? If so, how do I do that, and what would be the result?
Click to expand...
Click to collapse
Why did you have to flash DFE? It's only used if you change roms frequently to avoid encryption.
I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.
shleepy said:
I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.
Click to expand...
Click to collapse
Your best bet is to go back to stock and start again. I believe installing an official fastboot ROM will restore encryption. Your previous issues were probably caused by not formatting data when flashing PE.
There is no requirement to disable encryption on this phone, ignore any guide that adds that as a step. You should only disable encryption if it's your personal preference to disable it.
Follow this guide.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the PE ROM, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
shleepy said:
I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.
Click to expand...
Click to collapse
Do yourself a favour and follow the instructions in the description of the rom, not some instructions you found online telling you to do some unnecessary stuff. Going to and from miui, format data, everything else just wipe cache, system and data to avoid issues, even then you can get away with dirty flashing aosp based roms 99% of the time imo.
As for the miui update, I have no idea how you came to that conclusion but just no, that's not how it works at all. Vendor firmware and the rom is all you need for pixel experience at the bare minimum.
You can try flashing the rom again, but don't flash the DFE.
Hello everyone, try to install several custom roms, there is no tutorial that explains how the rom and twrp are installed. There are many tutorials and they all contradict, some say do this, others say do the other, but all fail.
Twrp boot, flash rom, install custom rom on SLOT A, install TWRP on slot B.
PROVEN ROMS:
PixelExperience:
Very low call volume, impossible to fix.
LineageOS:
Does not start play store, does not allow login to accounts, does not allow to install gapps.
- CURRENT ROM--
Evolution X:
Does not start play store, does not allow login to accounts.
I have been installing customs roms for years and this device is costing me my life. HELP
The most users get in trouble with A/B devices because they don't know exactly the differences between A-only and A/B partitions.
You don't know how to install TWRP? Why? On twrp.me you can find a detailed instruction for every single model.
A custom ROM is always a .zip file and you can flash a .zip file via TWRP. If you flash a ROM while slot _a is set as active you will install the ROM on slot _b. That's all. That is the meaning of semless updates.
Every new ROM must contain a own boot.img. A new boot.img will delete TWRP and Magisk. TWRP is a recovery and A/B devices don't have own partition for recovery. The recovery is merged in the boot partition.
Also Magisk uses the boot.img to patch the ramdisk. Flashing a new boot.img means you override the patched ramdisk with a new own. As a result you need a new Magisk installation.
my recommendation is starting from scratch with a clean stock 10 install then trying again...
lineage wiki probably has the best install instructions https://wiki.lineageos.org/devices/lake/install but also check its forum thread https://forum.xda-developers.com/g7-plus/development/rom-lineageos-17-1-t4076569 for other recommendations . if you want evolution X read the instructions in its thread https://forum.xda-developers.com/g7-plus/development/rom-evolution-x-4-1-69-moto-g7-plus-t4081731 as well but there pretty much the same.... you've probably went threw those threads already based upon you saying you have tried 3 diff roms already, but try again from a clean install of stock 10 (IF you want to run a 10 rom). i know it's not really a "clean/easy/simple" solution/tutorial, but with this device there is some trial and error for getting a half assed working install. however MAKE SURE you are on a stock 10 rom when installing a 10 rom, pixel experience is a 9 rom and that could be part of your problem. moving from android 10 stock, to a 9 rom, then back to a 10 rom will lead to issues. or a 9 rom, to a 10 rom, without moving to stock 10 in between will lead to problems.
as this isnt nearly a widely adopted device, custom rom development and support isnt even close to other devices, so expect bugs. i've always ran cfw's on all my devices ever since the htc g1/dream days, this is my first device i've stuck with stock due to the lack of rom development, lack of widespread use and people actually wanting to use cfw and users to bug report, and stock being more stable... but your mileage may vary. also no disrespect meant towards the hard working dev's who do work on this device, keep it up.
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
prodigy90 said:
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
Click to expand...
Click to collapse
yeah it seems to be pretty finicky getting a good install and gapps seem to have issues. reading all the posts in the lineage17 thread just make me cringe. as much as i'd love to use lineage as my daily driver (or evo X) my days of willing to put up with a buggy rom and daily dirty flashing have come and gone. this was my first, and will be my last, moto device for the the simple fact it just doesnt have the user base and its development is stunted, compared to more widely used devices.
i hope you get something working, the lineage17 thread definetly has some good advice on what people have done to get a working install, should be able to apply flash order etc to a evoX install (minus having to install gapps for evoX)
solved
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
prodigy90 said:
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
Click to expand...
Click to collapse
yup, the LMSA is a great tool for sure. glad you got back to a clean stock install.