Database Develop

Odin Firmware Snapdragon N960USQU1ARG6

Here we go only for Snapdragon Note9
Firmware N960USQU1ARG6
Link: https://www.androidfilehost.com/?fid=3700668719832238180
MD5: 11469266664cdbcb89b74f994ce8f861
Running On My Galaxy Note8 SM-N950U Wicked Venom

Nice find V!

Is this the unlocked version with no bloatware?

NICEGYPT said:
Is this the unlocked version with no bloatware?
Click to expand...
Click to collapse
The answer is no, not for unlocked, this is CCT think that's cricket, so this is basically on T-Mobile as well 1ARG6.
Running On My Galaxy S9+ SM-G965U Wicked Venom

Venom0642 said:
The answer is no, not for unlocked, this is CCT think that's cricket, so this is basically on T-Mobile as well 1ARG6.
Running On My Galaxy S9+ SM-G965U Wicked Venom
Click to expand...
Click to collapse
Thanks! Hopefully, the unlocked one comes out fast... I hate bloatware especially VZW... I had the unlocked version on my note 8 tmo and vzw.

Venom0642 said:
The answer is no, not for unlocked, this is CCT think that's cricket, so this is basically on T-Mobile as well 1ARG6.
Running On My Galaxy S9+ SM-G965U Wicked Venom
Click to expand...
Click to collapse
From what I've seen in my quest to identify the bands present in the ComCasT (Xfinity) version, CCT is the Xfinity Mobile version firmware, which is similar to Verizon's firmware in bands supported.
Cricket's 3 letter prefix is AIO (named for its parent company Aio Wireless
Thanks to the OP for uploading the original CCT firmware, as I am getting that model w/ their $300 prepaid card rebate.

Quick question. The file download says Note 8. Are you sure this is for the Note 9?

awtryau89 said:
Quick question. The file download says Note 8. Are you sure this is for the Note 9?
Click to expand...
Click to collapse
Of course it's for the Note 9, it's in the folder of Note 8, so maybe that's why your seeing that part , couldn't create a solo section for Note 9 cause AFH hasn't as of yet added the Note 9.
Running On My Galaxy S9+ SM-G965U Wicked Venom

Venom0642 said:
The answer is no, not for unlocked, this is CCT think that's cricket, so this is basically on T-Mobile as well 1ARG6.
Running On My Galaxy S9+ SM-G965U Wicked Venom
Click to expand...
Click to collapse
hello
CCT is the Comcast CSC
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Like i said i think it was Cricket, but this is universal for any Snapdragon, Note 9.
Running On My Galaxy Note8 SM-N950U Wicked Venom

about N960U :
SM-N960U OYN multi CSC ( ATT BST CCT CHA GCF SPR TMB USC VMU VZW XAA XAS )
by default : XAA
ATT - United States of America (AT&T)
BST - United States of America (BST)
CCT - United States of America (Comcast)
CHA - United States of America (CHA)
GCF - United States of America (GCF)
SPR - United States of America (Sprint)
TMB - United States of America (T-Mobile,Anritsu)
USC - United States of America (US Cellular)
VMU - United States of America (VMU Sprint)
VZW - United States of America ( Verizon)
XAA - United States of America (Anritsu,WCW,Tracfone,WCW MMSONLY,Simple,ISP,Consumer Cellular ATT,VIAERO,iWireless,GCI WEB,H2O,PTCI,Cellular ONE MTPCS,WalMart Family Mobile,Solavei,Multibrand,DTC Wireless,Mosaic Telecom,NEP,Pine Cellular,Union Wireless,Consumer Cellular TMO,Cellular One Danvile,Corr Wireless,LycaMobile,PLDT,Red Pocket,Republic Wireless,Nemont,Ultra Mobile,Ting,Truphone,Vodafone US,Vodafone )
XAS - United States of America (XAS sprint)
regards

Hey guys, just a warning. I flashed this to downgrade my Tmobile from ARH2. Flashed BL, AP, and CP. Now my phone won't completely unlock with the pattern. It doesn't tell me my pattern is wrong but what happens is after I swipe my pattern, the phone will black out as if it's unlocking, then goes back to the locked screen.
Anyone know how to get around this?
I'm downloading the TMB version of ARH2 which I'm hoping will fix it.
UPDATE: Fixed it by flashing the current Tmobile ARH2 firmware. So if you have T-mobile, please don't flash this.

Same thing happened to me. Booting into recovery mode and doing a full wipe fixed it. I am on Xfinity Mobile so I wanted their firmware. So far though, I am finding that nothing is different overall. There is a Video Calling feature in the menu now and the boot animation is Xfinity. Other than that, VOLTE and HD Voice was already working on the unlocked firmware. Xfinity has not enabled Wifi Calling on any Android phones yet so that point is moot.

I am on ARH4. Is that floating around somewhere?

SM-960F/DS.. CSC's... VoLTE, Wifi Calling....

My dad got me a Note 9 from the middle east (exynos, dual sim). Its Active CSC is KSA. I live in Canada and have been using it without any issues for the past few months. I was also able to recently update it to Pie since KSA is part of the OXM multi-csc.
I don't see an option for WiFi Calling, don't have VoLTE, and can't use Samsung Pay. I've been reading around for a few months now trying to wrap my head around all things Samsung (since this is my first Samsung phone...). I understand that this is due to my phone having KSA as the active CSC and being used in Canada? My provider (Rogers) has confirmed that they have WiFi calling activated on my line.
I was hoping someone could point me the right direction if there is any solution to this? There is no dual-sim version in Canada so I assume flashing some other Canadian firmware won't work (as it would be for a single-sim model).

Change CSC in THL. Follow the guide carefully:
https://forum.xda-developers.com/showpost.php?p=78438552&postcount=2011
Dowload New Version uploaded 15 Jan 2019:
https://forum.xda-developers.com/galaxy-note-9/how-to/combination-n960f-t3833752
On step 9 : download wtih SamFirm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and good to go! :good:

Thanks for the information. I'm wondering what CSC am I changing the phone? Canada is not part of the OXM Multi-CSC? The Canadian versions are also single-sim not DS. Can I use the method to change the CSC to a Canadian carrier's CSC and then still flash the Multi-CSC firmware?

You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44

megatooth said:
You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44
Click to expand...
Click to collapse
Ok - So I went through the process. I used RealTerm and changed the CSC to XAC (Canada, unbranded). Note that this is not part of the OXM Multi-CSC. After everything was done, the phone defaulted to XEU (United Kingdom). Trying the method again with SIM card inserted before restart didn't change this outcome. However, this whole time I was using the XSG (UAE) firmware to update the phone.
I will now try again with the THL firmware and hope that it works!
I'm assuming Samsung Pay will still be unavailable?

Samsung Pay will be available for unroot knox= 0x0! And Caller ID and spam protection.

Thanks for all your help so far. Things that I've learned so far:
1) Changing the CSC through the method you shared didn't really work when it was outside of the OXM Multi-CSC. For example, I tried changing CSC to RWC (Rogers, Canada) or XAC (Canada, Unbranded). When I did this and flashed any of the latest SM-N960F firmware (whether XSG, DBT, or THL) -- the device would default to XEU (United Kingdom). I'm assuming this is happening because the manually set Canadian CSC doesn't exist within the OXM multi-csc.
2) I tested this out by setting the CSC to THL and flashing the THL firmware. This time it did indeed change to THL firmware. Unfortunately, things like WiFi Calling and VoLTE were still not available. Samsung Pay worked - but didn't let me add any Canadian cards.
Rooting is obviously not an option on this phone due to tripping knox. Maybe sometime down the road someone can figure it out.

Or you can try to change for SM-N960W model.

megatooth said:
Or you can try to change for SM-N960W model.
Click to expand...
Click to collapse
SM-960W is the Snapdragon single-sim variant. I feel worst case it will fry the phone. Best case, I'll lose the dual-sim capability..

Have u tried installing the Canadian csc going into recovery wiping cache and then doing a reset from there? Then reboot with your Canadian sim only installed (no other sim or second sim if dual). Usually this triggers the correct csc code

mikey_sk said:
Have u tried installing the Canadian csc going into recovery wiping cache and then doing a reset from there? Then reboot with your Canadian sim only installed (no other sim or second sim if dual). Usually this triggers the correct csc code
Click to expand...
Click to collapse
Seems like the only way to do that would be to root the device since there is no SM-N960F in Canada -- only SM-N960W. So all the Canadian firmware is for SM-N960F. My understanding is that I would have to root the device and then change the CSC based on this discussion:
https://forum.xda-developers.com/ga...960n-n960u-n960u1-n960w-n9600-t3833721/page18
If I follow the method explained earlier by changing CSC with RealTerm -- the device rejects the the Canadian CSC (e.g. XAC or RWC) and defaults to XEU (which is part of the OXM mutli-csc).

you can't flash a different model firmware with odin

I did it and works for me volte is working again, it dosen´t matter the firmware you flash, you must change csc code, follow the link and you can change it, its´´s so easy

johnmilthon said:
I did it and works for me volte is working again, it dosen´t matter the firmware you flash, you must change csc code, follow the link and you can change it, its´´s so easy
Click to expand...
Click to collapse
Can you explain what did you do which worked?
Sent from my SM-N960F using Tapatalk

Question on CSC for T-Mobile USA
megatooth said:
You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44
Click to expand...
Click to collapse
Would I be using THL for T-Mobile in USA as well? I have SM-N960F D/S phone running Android Pie.

No. Not for T-Mobile.

Unlocked Note 8 No wifi calling, volte, or advanced messaging

I've already read a bunch of forums on this and finally got into the ims settings but they all say "false" Is there any way with or without root to enable the settings. If I do have to root it, what do I do after to activate these features? The phone has the T-Mobile boot animation and receives T-Mobile software updates. I'm using it on MetroPCS. If I switched to T-Mobile would the features work then? My last phone was a locked T-Mobile S8 and that worked fine on MetroPCS with all the features. Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

https://imgur.com/a/1d9r4Wo

Bump

Mc Binsk said:
Bump
Click to expand...
Click to collapse
When using T-mobile firmware with tmo service everything will say true. If you look in software info it should say tmb/tmb/tmb.

Ace42 said:
When using T-mobile firmware with tmo service everything will say true. If you look in software info it should say tmb/tmb/tmb.
Click to expand...
Click to collapse
It says tmb/xaa/att. What does that mean?

Mc Binsk said:
It says tmb/xaa/att. What does that mean?
Click to expand...
Click to collapse
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.

..

Ace42 said:
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.
Click to expand...
Click to collapse
According to this guide would I need to do the carrier change first? Or could I to straight to flashing the TMobile firmware?
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884

Ace42 said:
I'm guessing the phone started on AT&T firmware, and was not correctly moved to TMB. XAA means U1 fw (att + tmb are U). You're using Frankenstein software, suppose that's part of the problem. If you flash the Tmobile fw with your SIM inserted it should fix that.
Click to expand...
Click to collapse
Also I'm my baseband version is N950USQS5CRK1. Will it allow me to flash the TMobile firmware that matches that version? Thank you for your help.

Mc Binsk said:
It says tmb/xaa/att. What does that mean?
Click to expand...
Click to collapse
This was originally an ATT device. That's what the 3rd CSC Code tells you. It can't be changed, but it also doesn't affect anything.
My guess is someone flashed this to the N960U1 firmware, and then just flashed the T-Mobile CSC file. Probably to get back RCS texting or Video calling. But it left you with Frankenstein firmware.
Just flash a full T-Mobile firmware through ODIN. Use the CSC_OYN file, not the HOME_CSC file. Flash all five files. It will force a factory reset, but should get you back on the full T-Mobile firmware.
If it goes right, you'll end up with TMB/TMB/ATT. which is what I also have.

Mr. Orange 645 said:
This was originally an ATT device. That's what the 3rd CSC Code tells you. It can't be changed, but it also doesn't affect anything.
My guess is someone flashed this to the N960U1 firmware, and then just flashed the T-Mobile CSC file. Probably to get back RCS texting or Video calling. But it left you with Frankenstein firmware.
Just flash a full T-Mobile firmware through ODIN. Use the CSC_OYN file, not the HOME_CSC file. Flash all five files. It will force a factory reset, but should get you back on the full T-Mobile firmware.
If it goes right, you'll end up with TMB/TMB/ATT. which is what I also have.
Click to expand...
Click to collapse
Thanks a lot! For some reason it wasn't working right on MetroPCS but I put a TMobile sim and now all the features work and it says tmb/tmb/att. So I guess I don't have to flash the firmware

Mc Binsk said:
Thanks a lot! For some reason it wasn't working right on MetroPCS but I put a TMobile sim and now all the features work and it says tmb/tmb/att. So I guess I don't have to flash the firmware
Click to expand...
Click to collapse
Glad you got it figured out!

A705FN multi CSC firmware

wallpapers :
https://forum.xda-developers.com/showpost.php?p=79353268&postcount=2
firmwares :
https://samfrew.com/fr/model/SM-A705FN/
A705FN OJM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A705FN OXM
regards

A705FN OGC ( Orange )
.

Will the latest Ukraine firmware work fine with a BTU device?

@theoneofgod
yes you can , but
latest firmware for BTU is A705FNXXU1ASD1 CSC A705FNOXM1ASD1 with april sécurity patch
latest firmware for SEK is A705FNXXU1ASD6 CSC A705FNOXM1ASD6 with april build date and may sécurity patch ( edited )
if you upload SEK firmware , you will not get OTA uppdates for your BTU CSC , so you can wait for may BTU release
regards

error

yakapa40 said:
@theoneofgod
yes you can , but
latest firmware for BTU is A705FNXXU1ASD1 CSC A705FNOXM1ASD1 with april sécurity patch
latest firmware for SEK is A705FNXXU1ASD6 CSC A705FNOXM1ASD6 with april sécurity patch
if you upload SEK firmware , you will not get OTA uppdates for your BTU CSC , so you can wait for may BTU release
regards
Click to expand...
Click to collapse
The touch, camera, and fingerprint reader improvements interest me a lot. Doesn't ASD6 have May patch?

@theoneofgod

yakapa40 said:
@theoneofgod
Click to expand...
Click to collapse
Yeah. May patch. I guess flashing back to BTU would be possible in the future, if/when that gets ASD6?

yes very strange but with build date 29/04/2019 and may security pach
you can upload this firmware and after wait for a new BTU firmware ( may )

What is it with Ukraine? They've got another new firmware.

Thanks for this!

samsung galaxy a70
i have the samsung galaxy a70 and the model i have is sm-a7050 and i know there are 2 or 3 different model's...the question i have is does all of the different models work in the usa?? because the model sm-a7050 i have is only pulling 3g network singles i'm not getting 4glte singles and i went in the network apn settings and set that up with my network provider which is cricket wireless and this phone network bans 2 out 5 should be working....so i dont know if anybody can help me out with this problem but really hope someone can

Jamie5150 said:
i have the samsung galaxy a70 and the model i have is sm-a7050 and i know there are 2 or 3 different model's...the question i have is does all of the different models work in the usa?? because the model sm-a7050 i have is only pulling 3g network singles i'm not getting 4glte singles and i went in the network apn settings and set that up with my network provider which is cricket wireless and this phone network bans 2 out 5 should be working....so i dont know if anybody can help me out with this problem but really hope someone can
Click to expand...
Click to collapse
SM-705MN works in the USA
Supports the following bands:
LTE FDD: 1 2 3 4 5 7 8 12 13 17 20 28 66
LTE TDD: 38 40 41
SM-705FN Is missing a bunch of bands
LTE FDD 1 3 5 7 8 20
LTE TDD 38 40 41

@Jamie5150
regards

So then maybe I should try and update the firmware right? And can I get the firmware on here?

More places have got an update which is better. No word of camera improvements like Ukraine.

Hey guys, so I downloaded BTU-A705FNXXU1ASE4-20190529180340.zip and would like to flash the phone purchased in the UAE to BTU, do I just flash it with ODIN? How do I change the CSC?

mateuszd said:
Hey guys, so I downloaded BTU-A705FNXXU1ASE4-20190529180340.zip and would like to flash the phone purchased in the UAE to BTU, do I just flash it with ODIN? How do I change the CSC?
Click to expand...
Click to collapse
Seems like nobody replied to your query.
Flash it with Odin normally, insert any UK SIM card, do a factory reset and it will automatically change to BTU.

Hi,
can i flash CSC from OJM to OXM with different region [ united arab emirates XSG --to-> french XEF]

yes you can if it is not a downgrade
dont forget to save all your data
regards

Volte support

Hello, I purchased a HK model Xperia 10 II (to be used in US market) which currently doesn't support Volte. Does anyone know of how to support?

thoshi64 said:
Hello, I purchased a HK model Xperia 10 II (to be used in US market) which currently doesn't support Volte. Does anyone know of how to support?
Click to expand...
Click to collapse
As it is not on US firmware it is being software restricted from supporting VoLTE. There is no US firmware and little to no development for this phone. Sony has not announced any plans for a us version or for a US kernel.
I LOVE this phone but the lack of VoLTE became a huge issue when major carriers and shared networks announced they would no longer support phones without this feature. They're also shutting down older frequencies on towers in prep for 5G. If it at least supported Wi-Fi calling that would help but it doesn't.

Even I need assistance with similar issue, I am using a UK model in India. I am struggling without VoLTE or VoWIFI support. Can somebody help me what we can do.

bheemudu said:
Even I need assistance with similar issue, I am using a UK model in India. I am struggling without VoLTE or VoWIFI support. Can somebody help me what we can do.
Click to expand...
Click to collapse
see post above...

I changed my firmware to SEA customization and I have now the VoLTE option for activate in network settings, sadly, in Paraguay there is no operator with VoLTE support to test, but you could try if you want

bheemudu said:
Even I need assistance with similar issue, I am using a UK model in India. I am struggling without VoLTE or VoWIFI support. Can somebody help me what we can do.
Click to expand...
Click to collapse
What kind of problem you are facing bcz I am planing to buy form UK also

I have the xperia 10 ii and did have T-Mobile but can confirm it works on google fi with VoLTE and wifi calling support as long as you activate the sim card in a google fi supported phone first. I switch just to support this phone and get a cheaper bill
Mine has the HK firmware on it but I'm sure this will work with any of the firmwares on it. The fi sim card must be in the first sim card slot it will not work in sim slot 2

Meloferz said:
I changed my firmware to SEA customization and I have now the VoLTE option for active in network settings, sadly, in Paraguay there is no operator with VoLTE support to test, but you could try if you want
Click to expand...
Click to collapse
I can confirm that this works fine, I flashed my single SIM version with the dual SIM version. It has now active and working.

srdempster said:
I can confirm that this works fine, I flashed my single SIM version with the dual SIM version. It has now active and working.
Click to expand...
Click to collapse
What is the SEA customization and where do I get it, sorry if this is a dumb question

Jhackler said:
What is the SEA customization and where do I get it, sorry if this is a dumb question
Click to expand...
Click to collapse
You can download from Xperifirn, and then flash to your phone with Newflasher
SEA is the customization for the South east Asia, that have VoLTE configuration

Meloferz said:
You can download from Xperifirn, and then flash to your phone with Newflasher
SEA is the customization for the South east Asia, that have VoLTE configuration
Click to expand...
Click to collapse
so I did this and now I got a your device is currupt and cannot be verified

Jhackler said:
so I did this and now I got a your device is currupt and cannot be verified
Click to expand...
Click to collapse
try to repair with Xperia Companion

Meloferz said:
try to repair with Xperia Companion
Click to expand...
Click to collapse
it would not let me because I have unlocked boot loader lol

Meloferz said:
try to repair with Xperia Companion
Click to expand...
Click to collapse
it worked I found out how to lock the boot loader I am dumb. Not sure how to get the SEA customization to not brick it

srdempster said:
I can confirm that this works fine, I flashed my single SIM version with the dual SIM version. It has now active and working.
Click to expand...
Click to collapse
When I flash the SEA customization to my single sim model I wind up with boot loops. what was the process that worked for you?

srdempster said:
I can confirm that this works fine, I flashed my single SIM version with the dual SIM version. It has now active and working.
Click to expand...
Click to collapse
When I flash the SEA customization to my single sim model I wind up with boot loops. what was the process that worked for you?

Ok so from fully updated rom and boot loader locked flashing SEA customization worked and I toggled on VOLTE. I then let straight talk route me to there thing saying my sim doesnt support the VOLTE network. once it forwarded me to waiting cue it hung up. This made the network try VOLTE thinking I got help and it turned on lol. Using Volte on At&T network in america
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Meloferz said:
I changed my firmware to SEA customization and I have now the VoLTE option for activate in network settings, sadly, in Paraguay there is no operator with VoLTE support to test, but you could try if you want
Click to expand...
Click to collapse
Hi! May I ask how does regional customization affect the availability of the VoLTE option?
I am using Xperia 10 II (came with HK customization stock firmware) in Japan, and my operator is Rakuten Mobile. I don't have the VoLTE option and it's kind of a huge problem since the operator is a fairly new one and has no GSM/UMTS network, so I can't make or receive any phone calls. Data works fine after adjusting the preferred network type to LTE only.
Can I do the same thing (flashing the SEA customization) to get the VoLTE option? I would like to know what exactly controls whether the option is available if that is ok.

ripppani said:
Hi! May I ask how does regional customization affect the availability of the VoLTE option?
I am using Xperia 10 II (came with HK customization stock firmware) in Japan, and my operator is Rakuten Mobile. I don't have the VoLTE option and it's kind of a huge problem since the operator is a fairly new one and has no GSM/UMTS network, so I can't make or receive any phone calls. Data works fine after adjusting the preferred network type to LTE only.
Can I do the same thing (flashing the SEA customization) to get the VoLTE option? I would like to know what exactly controls whether the option is available if that is ok.
Click to expand...
Click to collapse
Yes, my phone was from HK also, and after I flashed SEA customization, VoLTE option appeared and I can use VoLTE, now we have a operator here in Paraguay with VoLTE and works as expected

Meloferz said:
Yes, my phone was from HK also, and after I flashed SEA customization, VoLTE option appeared and I can use VoLTE, now we have a operator here in Paraguay with VoLTE and works as expected
Click to expand...
Click to collapse
Should I flash the whole firmware downloaded with Xperifirm or only some specific files?
Also, could you please explain why SEA customization gives you the VoLTE option? Sorry if that is a dumb question.